Can I use a 115v 26 amp welder on a regular outlet?

Can I use a 115v 26 amp welder on a regular outlet?
by

1 Answer

Answer :

answer:As long as the wiring and the breakers are at least 30 amp you should be okay. Don’t try to use it in a 20 amp circuit. If in doubt have someone come in and test the circuits, or just put in a new one for the welder. A little effort and money spent up front may save you from burning down your garage and possibly your house.
by

Related questions

A 1250 W heater operates at `115V`. What is the resistance of the heating coil?

Description : A 1250 W heater operates at `115V`. What is the resistance of the heating coil?

Last Answer : A 1250 W heater operates at `115V`. What is the resistance of the heating coil? A. `1.6Omega` B. `13.5Omega` C. `1250Omega` D. `10.6Omega`

welding i want to weld steel bars to my trailer should i use a arch welder or a wire feed welder?

Description : welding i want to weld steel bars to my trailer should i use a arch welder or a wire feed welder?

Last Answer : arch welding is a more stable form of welding. it get hotter and creates a stronger bond

Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder as he knows which welds are likely to produce the least defects c) This will be referenced in the inspection and test plan d) Nobody, as welding is always carried out to a high standard the use of percentage NDT is of no real value

Description : Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder ... welding is always carried out to a high standard the use of percentage NDT is of no real value

Last Answer : c) This will be referenced in the inspection and test plan

What are the pros and cons of becoming a welder?

Description : What are the pros and cons of becoming a welder?

Last Answer : answer:It's a good craft and well paid when there is work. If you're into the building trades, it is a good choice. On the other hand, you don't do much more than weld all the time. And if ... working construction you might be in a ditch or outdoors in bad weather. But that's true of a lot of jobs.

Any tips for a novice welder?

Description : Any tips for a novice welder?

Last Answer : answer:My tip is this. Have a potato with you at all times. My father was a mechanical engineer that owned a welding and machine shop. After school we went to the shop. When I wasn't sweeping I was bolting ... eyes. It still hurt but it was a lot better. And practice.. Being a good welder is a art.

What should I get for my first welder, arc or stick?

Description : What should I get for my first welder, arc or stick?

Last Answer : ‘pends, I think you should get the arc.

How to land top welder jobs?

Description : How to land top welder jobs?

Last Answer : Welding is an industry where lots of really good jobs exist. If you want to be competitive for welder jobs, then you have to do the right things to position yourself. These jobs pay very ... jobs. These places have dedicated programs that do nothing but provide prospective welders with a skill set.

How many pipe welder jobs are currently open?

Description : How many pipe welder jobs are currently open?

Last Answer : That depends, are you wondering about pipe welder jobs at acertain company, in a certain city, a certain state, or all thejobs in the country? If you want to know about a certain company,contact the ... out. If it is one of the other choices,narrow down the demographic on monster to get an idea.

What is the salary for an underwater welder?

Description : What is the salary for an underwater welder?

Last Answer : While underwater welding is a dangerous career, it can be very lucrative and pay upwards of 100,000 dollars per year with a median salary around 90,000 dollars annually

what is the salary of an underwater welder?

Description : what is the salary of an underwater welder?

Last Answer : An underwater welder starts off in the mid 40s. You should research this on any website and scan salary given in ads. You may want to call a center by using 411. This could direct you to an actual center.

What kind of experience do I need to be a welder?

Description : What kind of experience do I need to be a welder?

Last Answer : According to my research in order to become a Welder you will need to take a test to receive your Welder's certificate. Once you get the certificate you can apply for jobs.

How do I learn to be a professional welder?

Description : How do I learn to be a professional welder?

Last Answer : Most community colleges offer welding as a degree. You will have a teacher who knows everything about welding and has the experience to back them up.

does a welder have to do any type of schooling/classes?

Description : does a welder have to do any type of schooling/classes?

Last Answer : There are multiple technical trade schools that provide welding classes and certification programs. One example is http://www.witcc.edu

In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Description : In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Last Answer : d) They give more accurate indications

Who has the final responsibility of sentencing and accepting a weld on completion? a) The contractor’s inspector b) Site manager c) The welder d) The client’s inspector or certifying authority

Description : Who has the final responsibility of sentencing and accepting a weld on completion? a) The contractor’s inspector b) Site manager c) The welder d) The client’s inspector or certifying authority

Last Answer : d) The client’s inspector or certifying authority

What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant information c) None if the tensile strength of the consumables is the same as the approved one d) Change the electrode for the correct type and continue welding

Description : What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant ... the same as the approved one d) Change the electrode for the correct type and continue welding

Last Answer : b) Report the incident and record all relevant information

Who has the responsibility of ensuring the welder is using the correct polarity during welding? a) The welder and the welding inspector b) Store man and the welder c) Welding Engineer d) The Q/A department

Description : Who has the responsibility of ensuring the welder is using the correct polarity during welding? a) The welder and the welding inspector b) Store man and the welder c) Welding Engineer d) The Q/A department

Last Answer : a) The welder and the welding inspector

t is permissible to allow trainee welder to carry out production welding? a) Never b) Yes as long as the supervisor is happy with his workmanship standard c) Yes as long as he has the approved qualification to cover the intended scope of work d) Yes as long as no NDT is required on the finished weld

Description : t is permissible to allow trainee welder to carry out production welding? a) Never b) Yes as long as the supervisor is happy with his workmanship standard c) Yes as long as he has the approved ... cover the intended scope of work d) Yes as long as no NDT is required on the finished weld

Last Answer : a) Never

Which of the following would not be required to be checked before welding? a) The welding consumables b) The welder qualification c) Calibration of the welding equipment d) The workshop humidity

Description : Which of the following would not be required to be checked before welding? a) The welding consumables b) The welder qualification c) Calibration of the welding equipment d) The workshop humidity

Last Answer : d) The workshop humidity

Who determines what the correct weld preparation (root gap, root face, included angle) should be? a) The welding engineer b) The welding supervisor c) The welder will decide d) The inspector will recommend what is suitable

Description : Who determines what the correct weld preparation (root gap, root face, included angle) should be? a) The welding engineer b) The welding supervisor c) The welder will decide d) The inspector will recommend what is suitable

Last Answer : a) The welding engineer

New AT weld should be entered in TMS by ? (i) Sectional JE/SSE* (ii) Incharge SSE (iii) Welder (iv) None of the above

Description : New AT weld should be entered in TMS by ? (i) Sectional JE/SSE* (ii) Incharge SSE (iii) Welder (iv) None of the above

Last Answer : (i) Sectional JE/SSE*

Is it healthy to use sites like Fluther as an emotional outlet?

Description : Is it healthy to use sites like Fluther as an emotional outlet?

Last Answer : It is indiscreet. The web is not a confessional. Use judgement in what you reveal online or it may come back to haunt you.

Is it safe to use 2 to 3 way outlet plug adapters?

Description : Is it safe to use 2 to 3 way outlet plug adapters?

Last Answer : answer:I think it usually is. Does your computer have any warnings or directions specifying otherwise?

Can I plug my DVD player directly into the wall outlet or should I use a surge protector?

Description : Can I plug my DVD player directly into the wall outlet or should I use a surge protector?

Last Answer : Although a surge protector is certainly not required, it is highly recommended to protect all electronic equipment from damage.

Can I use a standard electrical outlet to install a warmrail in my bathroom or do I need special wiring?

Description : Can I use a standard electrical outlet to install a warmrail in my bathroom or do I need special wiring?

Last Answer : Yes, modern homes have adequate electrical outlets to allow you to do this safety. Just remember these units were design to be powered from the top entry and not the bottom. So must not be used up-side down.

For the same heat load and mass flow rate in the tube side of a shell and tube heat exchanger, one may use multipass on the tube side, because it (A) Decreases the pressure drop (B) Decreases the outlet temperature of cooling medium (C) Increases the overall heat transfer coefficient (D) None of these

Description : For the same heat load and mass flow rate in the tube side of a shell and tube heat exchanger, one may use multipass on the tube side, because it (A) Decreases the pressure drop (B) ... the outlet temperature of cooling medium (C) Increases the overall heat transfer coefficient (D) None of these

Last Answer : (C) Increases the overall heat transfer coefficient

How surprised are you, that OAN, Trump's favourite fake news outlet, aired an anti-Biden documentary made by literal Russian spies?

Description : How surprised are you, that OAN, Trump's favourite fake news outlet, aired an anti-Biden documentary made by literal Russian spies?

Last Answer : Who cares?

What are some stable careers that offer a creative outlet?

Description : What are some stable careers that offer a creative outlet?

Last Answer : I work in marketing. It’s a stable career and it does have some creativity to it. It also depends what kind of marketing you’ll be wanting to do

[Fluff time] How would you describe to someone the differences in streets that say ”dead end”, ”no outlet”, and ”not a through street”?

Description : [Fluff time] How would you describe to someone the differences in streets that say ”dead end”, ”no outlet”, and ”not a through street”?

Last Answer : answer:A dead end is just that; a bit down the road, it just ends. No cul-de-sac, no curb, just dirt beyond the asphalt. No Outlet is put up when there would seem to be ... through Berkeley CA where they put planters at intersections to calm traffic by not having people be abel to rive through.

What is the most likely thing to happen if I must plug in the very short cord of a small electrical appliance into an extension cord or power strip rather than a wall outlet? What's the worst that could happen?

Description : What is the most likely thing to happen if I must plug in the very short cord of a small electrical appliance into an extension cord or power strip rather than a wall outlet? What's the worst that could happen?

Last Answer : For some reason toasters have notoriously short cords and I've never received a reasonable excuse. The best I could come up with was that the cord was kept short to prevent the thing from falling ... has a 3 prong plug (grounded) you want a grounded extension cord plugged into a grounded outlet.

Can you connect lighting to the same duplex outlet as a clothes washer safely?

Description : Can you connect lighting to the same duplex outlet as a clothes washer safely?

Last Answer : answer:You can but it is inadvisable. Check the washer manual for how much current it needs during the different cycles. The problem is surge. When the washer motor starts (spin or wash cycle), it will ... I am sure they are assuming that there will be only one supply wire coming to the whole box.

If I have a 110v outlet and plug in a power strip with five sockets, why do I get 110v out of each instead of 22v?

Description : If I have a 110v outlet and plug in a power strip with five sockets, why do I get 110v out of each instead of 22v?

Last Answer : answer:Because of the type of circuit used. This is called a parallel circuit. Compare voltage to water pressure. If you would poke multiple holes at the same height from the bottom of a bucket full ... the pressure at each hole stays the same, independent from other holes you'd poke in the bucket.

Why would an electrical outlet be very tight even after about 13 years?

Description : Why would an electrical outlet be very tight even after about 13 years?

Last Answer : My guess would be that it’s related to the humidity of the bathroom from your taking a shower. Hopefully someone that knows for sure can give you a definite answer.

Who has heard of Ollie's Bargain Outlet?

Description : Who has heard of Ollie's Bargain Outlet?

Last Answer : answer:Lots of cheap stuff, clearance items, near expired items all jumbled in no particular order. If you have a touch of OCD you will have trouble walking around there. Oooo!!! Pomegranate juice for 99 cents! And Halloween decorations for 90% off!

Are you still using power when things are connected to the outlet but aren't on?

Description : Are you still using power when things are connected to the outlet but aren't on?

Last Answer : There is power consumption to keep them in “instant on”. Long time ago a TV used to take time to warmup, same with a lot of other equipment. Now they are constantly sucking a small bit of power.

Can I write about one subject at more than one outlet?

Description : Can I write about one subject at more than one outlet?

Last Answer : answer:I have done some writing, but never as a free-lancer, so I may not be of much help. But it seems wrong to me to shop the same general subject to multiple places at once. My thinking ... area of expertise. So for those two reasons, I would submit on different subject areas to the other two.

What would you have done if you saw a fast-food outlet worker flush the toilet after using it then went back to work without washing his hands?

Description : What would you have done if you saw a fast-food outlet worker flush the toilet after using it then went back to work without washing his hands?

Last Answer : I would have found the manager and told them what I saw.

What do you do when you get all worked up and want to rant about something, but don't have an appropriate outlet?

Description : What do you do when you get all worked up and want to rant about something, but don't have an appropriate outlet?

Last Answer : Blog or journal or tell someone.

If you’re charging a cellular phone using a home outlet, wouldn’t the more powerful current charge a phone faster than using a vehicle’s power to charge the same cellular phone?

Description : If you’re charging a cellular phone using a home outlet, wouldn’t the more powerful current charge a phone faster than using a vehicle’s power to charge the same cellular phone?

Last Answer : Do you understand the difference between AC and DC?

Which Coach outlet website is the real Coach?

Description : Which Coach outlet website is the real Coach?

Last Answer : If you go to the Coach homepage at coach.com and look at the “Store Locator” link at the bottom of the page, that will take you to a page where you can find the Coach retail stores… and another link to “Coach Factory Stores”, which is what you’re looking for, right?

How can I find an outlet hidden in a wall?

Description : How can I find an outlet hidden in a wall?

Last Answer : answer:An electronic field detector might be the easiest way. They are a hand held device that can locate electrical currents behind plaster and drywall. They range in price but I found one at about $12. On this site

How does optical audio outlet work?

Description : How does optical audio outlet work?

Last Answer : answer:It is a means of connecting components to your receiver by virtue of a tiny little optical light . Some audiophiles argue that the sound can never be as good as being hard wired. I've used ... other things, but not my speakers. There's a lot to be said for the simplicity of wireless.

Why is that my laptop (and my previous laptops) have always had power inputs on the left side and it seems that over the years invariably whatever outlet I need to plug into is on the right ?

Description : Why is that my laptop (and my previous laptops) have always had power inputs on the left side and it seems that over the years invariably whatever outlet I need to plug into is on the right ?

Last Answer : answer:Observer bias-you notice annoying events more than convenient ones. I think an actual sidedness / asymmetry is highly unlikely here. Fwiw my lapop's power is on the right. Or you have left- ... ;) This problem won't go away until power becomes transmitted wirelessly, cutting the last wire'.

Where to find these Ralph Lauren Shorts online I found at an outlet mall?

Description : Where to find these Ralph Lauren Shorts online I found at an outlet mall?

Last Answer : They aren’t that cool..

I plugged a faulty appliance into a wall outlet but now the outlet doesn't work. Can anyone help?

Description : I plugged a faulty appliance into a wall outlet but now the outlet doesn't work. Can anyone help?

Last Answer : Unless you can rewire the wiring within the walls out let i would call a electriction :) and a electriction will do it right so nothings wrong with it ethier.

How to fix outlet on a honda civic?

Description : How to fix outlet on a honda civic?

Last Answer : Check the fuse first.

Is there a 12v car/cigarette outlet adapter for the portable Bose Sounddock?

Description : Is there a 12v car/cigarette outlet adapter for the portable Bose Sounddock?

Last Answer : Just buy an inverter with a plug socket on instead! That way you can use most mains powered products via a cigarette lighter socket which is far more useful :-)

I have a Surge Protector (with Data Line protection: ethernet, telephone, coaxial cable) Plugged into a UNGROUNDED Outlet. Do is there a risk? It is Safe?

Description : I have a Surge Protector (with Data Line protection: ethernet, telephone, coaxial cable) Plugged into a UNGROUNDED Outlet. Do is there a risk? It is Safe?

Last Answer : My understanding is that the surge protector helps keep your equipment safe. And the grounding helps keep you safe. The surge protector will trip a circuit so any power spikes won't damage your stuff that is ... least that is how my brother in law explained it to me. (he is a licensed electrician)