The input to an inverter is X + (YZ). What is the output

The input to an inverter is X + (YZ). What is the output
by

1 Answer

Answer :

X + (YZ).
by

Related questions

In a properly functioning circuit, can both the input and output of an inverter be HIGH at the same time?

Description : In a properly functioning circuit, can both the input and output of an inverter be HIGH at the same time?

Last Answer : No.

The circuit which changes input signal at output with phase shift of 1800 is called (a) Amplifier (b) operational amplifier (c) switch (d) inverter

Description : The circuit which changes input signal at output with phase shift of 1800 is called (a) Amplifier (b) operational amplifier (c) switch (d) inverter

Last Answer : (d) inverter

A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Description : A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Last Answer : . One or the other of the inputs must be HIGH, but not both at the same time.

Which one of the following is one of the factors of x^2 (y – z) + y^2 (z – x) – z (xy – yz – zx) ? -Maths 9th

Description : Which one of the following is one of the factors of x^2 (y – z) + y^2 (z – x) – z (xy – yz – zx) ? -Maths 9th

Last Answer : answer:

x^4 + xy^3 + x^3y + xz^3 + y^4 + yz^3 is divisible by : -Maths 9th

Description : x^4 + xy^3 + x^3y + xz^3 + y^4 + yz^3 is divisible by : -Maths 9th

Last Answer : answer:

If a = (xy)/(x+y), b = (xz)/(x+z), and c = (yz)/(y+z), where a, b and c are non-zero, then what is x equal to ? -Maths 9th

Description : If a = (xy)/(x+y), b = (xz)/(x+z), and c = (yz)/(y+z), where a, b and c are non-zero, then what is x equal to ? -Maths 9th

Last Answer : answer:

If x + y + z = 0, then x^2/(2x^2+yz)+y^2/(2y^2+zx)+z^2/(2z^2+xy) = -Maths 9th

Description : If x + y + z = 0, then x^2/(2x^2+yz)+y^2/(2y^2+zx)+z^2/(2z^2+xy) = -Maths 9th

Last Answer : answer:

If `x=1+log_(a) bc, y=1+log_(b) ca, z=1+log_(c) ab`, then `(xyz)/(xy+yz+zx)` is equal to

Description : If `x=1+log_(a) bc, y=1+log_(b) ca, z=1+log_(c) ab`, then `(xyz)/(xy+yz+zx)` is equal to

Last Answer : If `x=1+log_(a) bc, y=1+log_(b) ca, z=1+log_(c) ab`, then `(xyz)/(xy+yz+zx)` is equal to A. 2 B. 1 C. 4 D. 6

Find the divergence of the field, P = x 2 yz i + xz k a) xyz + 2x b) 2xyz + x c) xyz + 2z d) 2xyz + z

Description : Find the divergence of the field, P = x 2 yz i + xz k a) xyz + 2x b) 2xyz + x c) xyz + 2z d) 2xyz + z

Last Answer : b) 2xyz + x

When simplified with Boolean Algebra (x + y)(x + z) simplifies to (A) x (B) x + x(y + z) (C) x(1 + yz) (D) x + yz

Description : When simplified with Boolean Algebra (x + y)(x + z) simplifies to (A) x (B) x + x(y + z) (C) x(1 + yz) (D) x + yz

Last Answer : Ans: D When simplified with Boolean Algebra (x + y)(x + z) simplifies to x + yz [(x + y) (x + z)] = xx + xz + xy + yz = x + xz + xy + yz (Qxx = x) = x(1+z) + xy + yz = x + xy + yz {Q(1+z) = 1} = x(1 + y) + yz = x + yz {Q(1+y) = 1}]

Which portion of a sine-wave input is retained in the output of a series-negative limiter?

Description : Which portion of a sine-wave input is retained in the output of a series-negative limiter?

Last Answer : Positive.

Which portion of a sine-wave input is retained in the output of a series-positive limiter?

Description : Which portion of a sine-wave input is retained in the output of a series-positive limiter?

Last Answer : Negative.

What would be the output of a negative clamper with a bias potential of −5 volts and an input voltage swing from +50 to −50 volts?

Description : What would be the output of a negative clamper with a bias potential of −5 volts and an input voltage swing from +50 to −50 volts?

Last Answer : -5 volts.

In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Description : In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Last Answer : The signals are opposite in polarity or 180 degrees out of phase with each other.

Which transistor configuration provides a phase reversal between the input and output signals?

Description : Which transistor configuration provides a phase reversal between the input and output signals?

Last Answer : Common emitter.

The input and output signals of a JFET amplifier have what phase relationship?

Description : The input and output signals of a JFET amplifier have what phase relationship?

Last Answer : They are 180 degrees out of phase.

In a circuit such as that shown in figure 3-16, if R1 has a value of 50 ohms and R2 has a value of 250 ohms and the input signal has a value of +10 millivolts, what is the value of the output signal?

Description : In a circuit such as that shown in figure 3-16, if R1 has a value of 50 ohms and R2 has a value of 250 ohms and the input signal has a value of +10 millivolts, what is the value of the output signal?

Last Answer : 60 millivolts.

In a circuit such as that shown in figure 3-15, if R1 has a value of 100 ohms and R2 has a value of 1 kilohm and the input signal is at a value of + 5 millivolts, what is the value of the output signal?

Description : In a circuit such as that shown in figure 3-15, if R1 has a value of 100 ohms and R2 has a value of 1 kilohm and the input signal is at a value of + 5 millivolts, what is the value of the output signal?

Last Answer : 50 millivolts.

select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Last Answer : Both the input signal and the feedback signal.

If the input signals are 180 degrees out of phase with each other and a combined output is taken between the two output terminals, what will the amplitude of the combined output signal be?

Description : If If the input signals are 180 degrees out of phase with each other and a combined output is taken between the two output terminals, what will the amplitude of the combined output signal be?

Last Answer : 200 millivolts.

If the input signals are 180 degrees out of phase with each other, what will be the peak-to-peak amplitude of the output signals?

Description : If the input signals are 180 degrees out of phase with each other, what will be the peak-to-peak amplitude of the output signals?

Last Answer : Each output signal will be 100 millivolts.

If the input signals are in phase, what will be the peak-to peak amplitude of the output signals?

Description : If the input signals are in phase, what will be the peak-to peak amplitude of the output signals?

Last Answer : 0 volts (the input signals will "cancel out").

If the single-input, differential-output, differential amplifier has an output signal taken between the two output terminals, what will the peak-to-peak amplitude of this combined output be?

Description : If the single-input, differential-output, differential amplifier has an output signal taken between the two output terminals, what will the peak-to-peak amplitude of this combined output be?

Last Answer : 200 millivolts. A-18. a. Differential amplifier

If the differential amplifier is configured with a single input and differential outputs, what will the output signals be?

Description : If the differential amplifier is configured with a single input and differential outputs, what will the output signals be?

Last Answer : Each output will be a sine wave with a peak-to-peak amplitude of 100 millivolts. The output signals will be 180 degrees out of phase with each other.

If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Description : If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Last Answer : . A different shape than the input signals but larger in amplitude.

If only one input signal is used with a difference amplifier, what will the output signal be?

Description : If only one input signal is used with a difference amplifier, what will the output signal be?

Last Answer : Equal in shape and frequency to the input signal; larger in amplitude than the input signal; half as large in amplitude as when two input signals were used that were 180 degrees out of phase.

If the two input signals to a difference amplifier are equal in amplitude and 180 degrees out of phase, what will the output signal be?

Description : If the two input signals to a difference amplifier are equal in amplitude and 180 degrees out of phase, what will the output signal be?

Last Answer : Equal in shape and frequency to each input signal and larger in amplitude by two times than

. If the two input signals of a difference amplifier are in phase and equal in amplitude, what will the output signal be?

Description : . If the two input signals of a difference amplifier are in phase and equal in amplitude, what will the output signal be?

Last Answer : No output (the signals will "cancel out").

What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Description : What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Last Answer : Common emitter (CE) and common base (CB)

When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease (which one) in the resistance of the regulating device.

Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease (which one) in the resistance of the regulating device.

Last Answer : An increase.

What characteristic is determined by the time required for a voltage wave to travel from the input end of an artificial transmission line to the output end and back again?

Description : What characteristic is determined by the time required for a voltage wave to travel from the input end of an artificial transmission line to the output end and back again?

Last Answer : Pulse width

What characteristic is determined by the time required for a voltage wave to travel from the input end of an artificial transmission line to the output end and back again?

Description : What characteristic is determined by the time required for a voltage wave to travel from the input end of an artificial transmission line to the output end and back again?

Last Answer : Pulse width.

If the inductance of a choke-input filter is increased, will the output ripple voltage amplitude (Er) increase or decrease?

Description : If the inductance of a choke-input filter is increased, will the output ripple voltage amplitude (Er) increase or decrease?

Last Answer : Decrease.

When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease in the resistance of the regulating device.

Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease in the resistance of the regulating device.

Last Answer : Increase.

Which type of optical splitter (Y-coupler or T-coupler) splits only a small amount of power from the input fiber to one of the output fibers?

Description : Which type of optical splitter (Y-coupler or T-coupler) splits only a small amount of power from the input fiber to one of the output fibers?

Last Answer : T-coupler

What is the logarithmic ratio between the input and output

Description : What is the logarithmic ratio between the input and output

Last Answer : dBm

How are the input and output directional couplers in a twt connected to the helix?

Description : How are the input and output directional couplers in a twt connected to the helix?

Last Answer : The directional couplers are not physically connected to the helix.

How does dc bias added to the input signal correct the distortion in the output signal?

Description : How does dc bias added to the input signal correct the distortion in the output signal?

Last Answer : The dc bias moves the input signal away from the step in the magnetism curve. This prevents the input signal from crossing the zero-point of the magnetism curve.

The waveforms shown below are the input and output of an overdrive

Description : The waveforms shown below are the input and output of an overdrive

Last Answer : a. Cutoff. b. Saturation.

If the rf amplifier discussed has an 80 milliwatt input, what would be the maximum output?

Description : If the rf amplifier discussed has an 80 milliwatt input, what would be the maximum output?

Last Answer : 800 watts.

What is the output Boolean expression for an AND gate with A and B as inputs when the B input is inverted?

Description : What is the output Boolean expression for an AND gate with A and B as inputs when the B input is inverted?

Last Answer : AB

What impedance relationship between the output of one circuit and the input of another circuit will provide the maximum power transfer?

Description : What impedance relationship between the output of one circuit and the input of another circuit will provide the maximum power transfer?

Last Answer : Equal impedance.

If the output of a circuit needs to be a complete representation of one-half of the input signal, what class of operation is indicated?

Description : If the output of a circuit needs to be a complete representation of one-half of the input signal, what class of operation is indicated?

Last Answer : Class B operation.

A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input

Description : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is :

Last Answer : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is : 200 V

What do you call a circuit that controls the magnetron output?A. Inverter B. Impeller C. Modulator D. Converter

Description : What do you call a circuit that controls the magnetron output? A. Inverter B. Impeller C. Modulator D. Converter

Last Answer : C. Modulator

What is the speciality of the inverter output transformer? Why it is provided?

Description : What is the speciality of the inverter output transformer? Why it is provided? 

Last Answer : a) This eliminates all 3rd harmonics in the output voltage. b) Solid earthed neutral is required for the inverter output, hence the interconnected star winding is essential. c) ... will cause circulating current between inverters during unbalanced faults. The inverters cannot withstand this. 

The energy conversion efficiency of a solar cell does not depend on a) solar energy insolation b) inverter c) area of the solar cell d) maximum power output

Description : The energy conversion efficiency of a solar cell does not depend on a) solar energy insolation b) inverter c) area of the solar cell d) maximum power output

Last Answer : b) inverter

In practice, a current source inverter consists of an AC/ DC converter with a large inductance ‘L’ in the output.

Description : In practice, a current source inverter consists of an AC/ DC converter with a large inductance ‘L’ in the output. This inductance maintains a ……… …………through the switching devices over short interval of time. A) constant current B) constant voltage C) constant power D) none of the (A), (B), (C)

Last Answer : In practice, a current source inverter consists of an AC/ DC converter with a large inductance ‘L’ in the output. This inductance maintains a constant current through the switching devices over short interval of time.