Draw a neat sketch of moving primary fixed secondary double sided LIM. Write one advantage and one disadvantage of it.

Draw a neat sketch of moving primary fixed secondary double sided LIM. Write one advantage and one disadvantage of it. 
by

1 Answer

Answer :

Ans: Moving primary fixed secondary, double side LIM

image

Advantages: i) No Need of backing of iron along the track as laminated core is used in each primary. ii) Uniform air gap maintained. iii) Higher thrust/force. iv) Better magnetic circuit performance. v) Better power factor. 


Disadvantages: i) Problem of maintaining uniform clearance between secondary Al plate and two primaries all along the track, particularly at points and crossing. ii) Costly due to Al plate all along the track. iii) Overall dimensions and weight higher iv) Increases the risk of accidents result from change in gap due to sudden production of lateral forces on the moving vehicle.

by

Related questions

Explain the resistance spot welding process with neat sketch. State its two advantage and disadvantage.

Description : Explain the resistance spot welding process with neat sketch. State its two advantage and disadvantage. 

Last Answer : Resistance Spot welding: Spot welding is employed to join overlapping strips, sheets or plates of metal at small areas .The pieces are assembled between two electrodes, which must possess high electrical & thermal ... for making the RSW a success. 4. The thick jobs are not easy to weld. 

Draw a diagram of radar level measurement. Write an advantage and disadvantage of it.

Description : Draw a diagram of radar level measurement. Write an advantage and disadvantage of it.

Last Answer : Advantages:  • This is non contact method  • High accuracy for measurements in storage tanks and process vessels Disadvantages:  • Expensive technology  • Reading is affected by change in density of liquid

Draw a neat sketch of 1-ph induction type energy meter and write operating principle of it.

Description : Draw a neat sketch of 1-ph induction type energy meter and write operating principle of it. 

Last Answer : Operating Principal:- The disc is placed between the two-flux due to pressure coil and flux due to current coil, which will set up torque on the disc which is proportional to power causing the ... is proportional to voltage, the second carries a current coil so its flux is proportional to current.

Draw and explain in brief construction of Diamond Pantograph. Write one advantage and one disadvantage of it.

Description : Draw and explain in brief construction of Diamond Pantograph. Write one advantage and one disadvantage of it.

Last Answer : Diamond Pantograph: Construction of Diamond Pantograph: 1)Diamond Pantograph consist of pressed steel channel sectional fitted with renewable collector strips and supported at the apex of Pentagonal ... It requires more maintenance than Faiveley type. 4. It is costlier than Faiveley type.

(i) Draw the neat sketch of bomb calorimeter. (ii) Write any three sources of air leakage in steam condenser.

Description : (i) Draw the neat sketch of bomb calorimeter. (ii) Write any three sources of air leakage in steam condenser.

Last Answer : (i)   (ii) Sources of air leakage in condenser: i) Air leak through joints and packing. ii) Air also comes in condenser with the steam. iii) In jet condensers dissolved air in the cooling water enters the condenser. 

Draw a neat and labelled sketch of rebound hammer and write two limitations of it.

Description : Draw a neat and labelled sketch of rebound hammer and write two limitations of it.

Last Answer : Labelled sketch of rebound hammer: Limitations of Rebound hammer test: 1. Rebound of hammer may get affected due to roughness of concrete surface. 2. The age of concrete also varies with ... coarse aggregate may affect rebound number. 5. Size and shape of specimen also affect hammer impact.

Draw a neat sketch of earth fault protection of auxiliary circuit of electric loco. State the function of relay and isolating resistance.

Description : Draw a neat sketch of earth fault protection of auxiliary circuit of electric loco. State the function of relay and isolating resistance.

Last Answer : Ans: Earth fault protection for auxiliaries in Loco: Function of relay: The earth fault occurring anywhere in the auxiliary circuit gets monitored by the relay which acts to trip the main CB. Function of ... star point to earth through a high resistance so that the relay operation is avoided.

Write one advantage and one disadvantage each for spring control method and gravity control method.

Description : Write one advantage and one disadvantage each for spring control method and gravity control method.

Last Answer : Advantages of Spring Control Method: 1) The spring-controlled meters may be used in any position. 2) In some instruments, springs can be used as current leads. 3) As springs are light in weight ... only. 2) Scale is non-uniform. 3) Control weights add to the weight of instrument.

Define stub. Explain single and double stub in brief with neat sketch.

Description : Define stub. Explain single and double stub in brief with neat sketch.

Last Answer : Stub:- Stub is the piece of short circuited transmission line which is used to tune out the reactance of the load when connected across the transmission line as close as possible ... but lengths are independently adjustable. The double stub matching provides wide range of impedance matching. 

Explain with neat sketch; the construction and working principle of Repulsion type moving iron instrument.

Description : Explain with neat sketch; the construction and working principle of Repulsion type moving iron instrument.

Last Answer : Repulsion Type Moving Iron Instrument: Construction: It consist of fixed cylinder hollow coil which carries operating current inside the coil there are two soft iron pieces. One of which is ... magnetized with same polarity a repulsive force act on them and moving iron piece gets deflected. 

Draw a neat sketch and explain the use of CT and PT for measurement of power in a single-phase circuit?

Description : Draw a neat sketch and explain the use of CT and PT for measurement of power in a single-phase circuit?

Last Answer : If wattmeter of proper range is not available or if voltage and current ranges are high we can usr CT and PT of suitable ratio. Connect the CT and PT as shown in figure. The reading of wattmeter can be multiplied by the ratio to get the actual power.   

Draw a neat sketch of Electro-dialysis.

Description : Draw a neat sketch of Electro-dialysis.

Last Answer : Electro- dialysis:

Draw a neat sketch of cross-section of an exogenous tree and label the parts.

Description : Draw a neat sketch of cross-section of an exogenous tree and label the parts. 

Last Answer : Cross-section of an exogenous tree:

Draw neat labeled sketch of ply press.

Description : Draw neat labeled sketch of ply press.

Last Answer : sketch of ply press

Draw the neat sketch of overhead valve operating mechanism and explain its working.

Description : Draw the neat sketch of overhead valve operating mechanism and explain its working.

Last Answer : Overhead valve mechanism: Figure shows the valve mechanism to operate the valve when it is in the cylinder head (in I and F head design). This type of mechanism requires two additional moving parts the push ... close. A spring (attached to the valve) returns the valve to its seated position.   

Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Description : Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Last Answer : Figure: Valve timing diagram of 4 stroke SI engine  

(i) state any two applications of I. C. Engine (ii) Draw a neat sketch of Two stroke petrol engine.

Description : (i) state any two applications of I. C. Engine (ii) Draw a neat sketch of Two stroke petrol engine.

Last Answer : Applications of I.C engine 1) In Automotive - i) Two stroke engine - Mopeds, Scooters. ii) Four stroke engine - Light vehicles, Heavy vehicles. 2) Marine Application - Ships, Boat 3) Locomotive s - ... handling system  (ii) Draw a neat sketch of Two stroke petrol engine. OR

Draw a neat lebelled sketch of optical square. Explain its working.

Description : Draw a neat lebelled sketch of optical square. Explain its working.

Last Answer : Working of optical square1. Optical square works on principle of optical square to set perpendicular offset 2. Keep ranging rods at point B and C as shown in fig. 3. Observe the ... matched each other point D can be marked on ground and distance CD is measured as perpendicular offset.

Draw a neat sketch of an arrow with dimensions.

Description : Draw a neat sketch of an arrow with dimensions.

Last Answer :  neat sketch of an arrow with dimensions

Draw a neat labeled sketch of 30m chain.

Description : Draw a neat labeled sketch of 30m chain.

Last Answer : neat labeled sketch of 30m chain

Draw a neat sketch of optical square. Explain its working.

Description : Draw a neat sketch of optical square. Explain its working.

Last Answer : Optical Square: Working: The optical square consists of circular box 50 mm in diameter, 12.5 mm in depth. The box has three slits as A,B, and C. bb' is horizon glass, half silvered i.e ... the point on the chain line where the offset can be dropped to meet point J as shown in fig.  

Draw a neat sketch of prismatic compass and label its component parts

Description : Draw a neat sketch of prismatic compass and label its component parts

Last Answer : Sketch of prismatic compass and label its component parts

Draw neat sketch of pre-combustion chamber and name its parts.

Description : Draw neat sketch of pre-combustion chamber and name its parts.

Last Answer : Fig. Pre-combustion chamber

Draw neat sketch to show TBI system of SI engine and name its parts.

Description : Draw neat sketch to show TBI system of SI engine and name its parts.

Last Answer : Draw neat sketch to show TBI system of SI engine and name its parts.

State the different types of SI engine combustion chambers. Draw a neat sketch of any one.

Description : State the different types of SI engine combustion chambers. Draw a neat sketch of any one.

Last Answer : 1) T Head Type Combustion chambers 2) L Head Type Combustion chambers 3) F- Head combustion chamber 4) Over head valve or I head combustion chamber 5) Hemispherical combustion chamber 6) Bathtub ... - Head combustion chamber 4) Over head valve or I head combustion chamber

Draw neat sketch of swirl type combustion chamber of IDI engine.

Description : Draw neat sketch of swirl type combustion chamber of IDI engine.

Last Answer : Fig. swirl type combustion chamber of IDI engine.

Define folds and draw neat sketch of a fold and label its different parts.

Description : Define folds and draw neat sketch of a fold and label its different parts. 

Last Answer : Fold: Folds may be defined as undulations or bends that are developed in the rock of the Earth’s crust, as a result of stresses (commonly lateral compression) To which these rocks have been subjected to, from time to time in the past history of the Earth.

Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode.

Description : Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode. 

Last Answer : Construction A PIN diode is made up of three semiconductor materials; two heavily doped P- and N- type material separated by an intrinsic (undoped) semiconductor (I) as shown in above figure ... . This advantage allows the PIN diode to process even weak signals.  Characteristics

Draw a neat sketch of simple curve showing all elements.

Description : Draw a neat sketch of simple curve showing all elements.

Last Answer : Simple curve

Draw neat sketch of simple circular curve and show notation there on.

Description : Draw neat sketch of simple circular curve and show notation there on.

Last Answer : Sketch of simple circular curve and show notation there on :

Draw neat sketch of contour for the following i)Hill ii) Valley iii)Gentle Slope iv) Ridge Line

Description : Draw neat sketch of contour for the following i)Hill ii) Valley iii)Gentle Slope iv) Ridge Line 

Last Answer : i)Hill ii) Valley iii)Gentle Slope iv) Ridge Line 

Draw a neat sketch of progressive die.

Description : Draw a neat sketch of progressive die. 

Last Answer : progressive die

Draw neat sketch showing various parts of die set.

Description : Draw neat sketch showing various parts of die set. 

Last Answer : Answer: 1. Stop 2.Sheet metal 3.Pilot 4.Blanking punch 5.Ram 6.Piercing punch 7.Stripper 8.die Fig. Progressive Die OR

Draw neat sketch of compound die, showing various parts of it.

Description : Draw neat sketch of compound die, showing various parts of it.

Last Answer : Answer:

Draw the neat sketch of fly press. Give the functions of important parts of it.

Description : Draw the neat sketch of fly press. Give the functions of important parts of it. 

Last Answer : Answer: OR Functions of important parts of Fly Press. 1. Ram : This is main operating part of the press which works directly during processing of a workpiece. Ram ... : A die is a specialized tool used in manufacturing industries to cut or shape material mostly using a press 

Draw a neat sketch of regenerative feed heating.

Description : Draw a neat sketch of regenerative feed heating.

Last Answer : Regenerative Feed Heating  

Explain loop antenna with neat sketch. Draw radiation pattern. State its advantages and applications.

Description : Explain loop antenna with neat sketch. Draw radiation pattern. State its advantages and applications.

Last Answer : Loop antenna:-The single turn coil carrying RF current through it having length less than the wavelength.   Advantages:- 1. highly directive 2. Small size Applications:- 1. For direction finding 2. In portable receivers 3. In navigation 

Draw a neat sketch of Ultrasonic flowmeter.

Description : Draw a neat sketch of Ultrasonic flowmeter. 

Last Answer : Diagram of ultrasonic flow meter (Time Difference Type ):

Draw neat sketch of Rotameter and explain its working principle.

Description : Draw neat sketch of Rotameter and explain its working principle.

Last Answer : Rotameter: - A variable-area flowmeter is one where the fluid must pass through a restriction whose area increases with flow rate. The height of the float is directly proportional to the flowrate ... on glass tube and the flow rate can be determined by direct observation of the metering tube  

Draw neat labelled sketch of Lamont boiler.

Description : Draw neat labelled sketch of Lamont boiler. 

Last Answer : Lamont boiler

Draw a neat sketch showing RCC components of lintel with 1:20 scale.

Description : Draw a neat sketch showing RCC components of lintel with 1:20 scale.

Last Answer : Draw a neat sketch showing RCC components of lintel with 1:20 scale.

Draw neat and labeled sketch of three pass packages type boiler.

Description : Draw neat and labeled sketch of three pass packages type boiler. 

Last Answer : Each set of tubes that hot combustion flue gas travels through before making a turn within the boiler, is considered a "pass." A 3-pass fire tube boiler design consists of three sets of ... design that allows more heat transfer time to deliver the same or higher efficiency rating. 

Draw a neat sketch of Gating system. State the functions of any four elements.

Description : Draw a neat sketch of Gating system. State the functions of any four elements.  

Last Answer : Gating system:  1. Sprue: The circular cross section that minimizes heat loss and turbulence is sprue, and the area of it is quantified from the choke area as well as the gating ratio.  2. ... the molten metal flow from the ingate has to be proportional to the casting area's volume. 

Draw a neat sketch and explain the accessory used to support long work.

Description : Draw a neat sketch and explain the accessory used to support long work.

Last Answer : Accessory to support long work: A steady rest is a tool for a lathe, enabling a machinist to make deep cuts in long, slender stock, bore out thin pieces of metal, and generally keeps thin stuff straight. ... tool that follows the cutter, a steady rest is firmly attached to the bed of a lathe.

Draw neat sketch of wind turbine and name various parts in it.

Description : Draw neat sketch of wind turbine and name various parts in it.

Last Answer : Draw neat sketch of wind turbine and name various parts in it.

Explain the necessity of compounding in steam turbine and draw a neat sketch of pressure velocity compounding.

Description : Explain the necessity of compounding in steam turbine and draw a neat sketch of pressure velocity compounding. 

Last Answer : Necessity of compounding in steam turbine: Compounding of steam turbines is necessary 1) To reduce speed of rotor blades to practical limits. 2) To reduce centrifugal force and hence to prevent ... stresses. Hence compounding is carried out.  Neat sketch of pressure velocity compounding.

Draw a neat sketch of surface condenser and label it.

Description : Draw a neat sketch of surface condenser and label it.

Last Answer : Figure: Surface Condenser

Suggest the type of joints in concrete when it is likely to increase in volume due to temperature change. Explain it and draw its neat sketch.

Description : Suggest the type of joints in concrete when it is likely to increase in volume due to temperature change. Explain it and draw its neat sketch.

Last Answer : When it is likely to increase in volume due to temperature change expansion joint is constructed. i. Expansion joints are provided by keeping a gap between panels of concrete and later sealing it ii. ... cotton and finally such joint is sealed using sealants like wood, thermocol or bitumen. 

State the necessity of Differential on a vehicle. Draw a neat sketch of the Differential unit and label all the parts.

Description : State the necessity of Differential on a vehicle. Draw a neat sketch of the Differential unit and label all the parts.

Last Answer : Need of Differential in automobile: 1) When vehicle is taking turn outer wheel will have to travel greater distance as compared to inner wheel. 2). If the vehicle has a solid rear axle only and no other ... turn, at the same time keep the speed of rear wheel same when going straight ahead.

Draw a neat sketch of a hollow propeller shaft. Label all the parts. State the necessity of Universal joint.

Description : Draw a neat sketch of a hollow propeller shaft. Label all the parts. State the necessity of Universal joint.

Last Answer : Necessity of universal joint: ● A universal joint is used where two shafts are connected at an angle to transmit the torque. ● Universal joint is used to transmit motion at varying angles.