Description : A production operative at a cheese factory discovered that the slicing process could be speeded up if the machine had a certain type of arm attached. He consulted the supervisor about purchasing one. The operative would be considered the A)user B)influencer C)buyer D)decider E)gatekeeper
Last Answer : A)user
Description : There is one application, which runs on a single terminal. There is another application that works on multiple terminals. What are the test techniques you will use on the second application that ... B. Concurrency test, Scalability C. Update & Rollback, Response time D. Concurrency test, Integrity
Last Answer : C. Update & Rollback, Response time
Description : Which phase/s of POP3 allow/s an user agent to retrieve the messages as well as to mark the messages for deletion purpose? a. Authorization Phase b. Transaction Phase c. Update Phase d. All of the above
Last Answer : b. Transaction Phase
Description : Which one of the following input device is user- programmable? A) Dumb terminal B) Smart terminal C) VDT D) Intelligent terminal
Last Answer : Answer : D
Description : The user generally applies _________ to access mainframe or super computer? (A) node (B) terminal (C) desktop (D) None of the Above
Last Answer : (B) terminal
Description : Which one of the following input device is user-programmable? a. Dumb terminal b. Smart terminal c. VDT d. Intelligent terminal
Last Answer : d. Intelligent terminal
Description : An Intelligent terminal (1) has a microprocessor, but cannot be programmed by the user (2) can process small data processing jobs, with the use of a large CPU (3) interacts with the user in English (4) cannot take data from the user
Last Answer : can process small data processing jobs, with the use of a large CPU
Description : The input terminal impedance at the center of a folded dipole antenna is A. 72 Ω B. 300 Ω C. 50 Ω D. 73 Ω
Last Answer : B. 300 Ω
Description : What is the input terminal impedance at the center if a folded dipole antenna? A. 300 ohms B. 72 ohms C. 50 ohms D. 450 ohms
Last Answer : A. 300 ohms
Description : What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?
Last Answer : 60-percent tin and 40-percent lead (60/40 solder).
Description : Why are preinsulated terminal lugs and splices color coded?
Last Answer : To identify wire sizes they are to be used on.
Description : Why should a lockwasher never be used with an aluminum terminal?
Last Answer : It gouges the terminal lug and causes deterioration.
Description : What tools should be used to install large aluminum terminal lugs and splices?
Last Answer : Power-operated crimping tools.
Description : Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?
Last Answer : No, it is done automatically by the petroleum abrasive compound that comes in the terminal or splices.
Description : Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?
Last Answer : Spaghetti or heat-shrinkable tubing.
Description : What are the basic requirements for any splice or terminal connection?
Last Answer : The connection must be both mechanically and electrically as strong as the conductor or device with which it is used
Description : What is a major advantage of the crimped terminal over the soldered terminal?
Last Answer : Requires relatively little operator skill to install.
Description : In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?
Last Answer : Negative.
Description : What is the range of earth terminal transmitter output power?
Last Answer : Up to 20 kilowatts.
Description : What is the function of a tone terminal set?
Last Answer : It converts dc to audio or vice versa.
Description : Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?
Last Answer : The internal (source) resistance of the battery will drop some of the voltage
Description : In the primary cell, why are negative ions attracted to the negative terminal of the cell?
Last Answer : The positive charge caused by electrons leaving the negative electrode attracts the negative ions.
Description : An ammeter should always be connected so that current will flow into what terminal and out of what terminal?
Last Answer : Negative, positive
Description : Which of the following items search engines don't want? A. keyword stuffing B. buying links C. poor user experience D. All of the above
Last Answer : D. All of the above
Description : A structure brings together a group of A) items of the same data type B) related data items and variables C) integers with user defined names D) floating points with user defined names
Last Answer : B) related data items and variables
Description : Identify the criteria for designing database from the point of view of user A) No redundancy B) No inapplicable attributes C) Uniformity in naming & definitions of the data items D) All of the above
Last Answer : D) All of the above
Description : What types of operating systems let more than one user access the same resources at the same time?
Last Answer : Multiuser/multitasking.
Description : What does user friendly mean in computer terms?
Last Answer : Operating instructions are written in everyday English
Description : Maintenance performed by the user activity is what maintenance level?
Last Answer : Organizational.
Description : Why must items to be soldered be cleaned just prior to the soldering process?
Last Answer : Solder will not adhere to dirty, greasy, or oxidized surfaces.
Description : List three items of information normally included in the general description section of a specification sheet for a transistor.
Last Answer : The kind of transistor, the transistor's common applications, and mechanical data
Description : What two primary items determine the class of operation of an amplifier?
Last Answer : The amount of bias and the amplitude of the input signal
Description : A kit for cleaning floppy disk drives contains what two items?
Last Answer : . a. A cloth or fiber cleaning disk. b. A bottle of cleaning solution.
Description : When computers use the cylinder method to store data on a hard disk pack, what three items make up the address that tells the computer where on a specific disk to store the data?
Last Answer : . a. Cylinder number. b. Recording surface number.
Description : What items are you to check when working on a circuit breaker?
Last Answer : Check the operating mechanism for smooth operation, check the contacts for pitting, check the terminals for tightness and corrosion, check the mounting hardware for tightness and wear, check all components for wear, and check the entire circuit breaker for cleanliness.
Description : What causes the current-carrying area at the center conductor of a coaxial line to be restricted to a small layer at the surface?
Last Answer : Skin effect.
Description : What is the typical frequency range about the center frequency of a tunable magnetron?
Last Answer : . ±5 percent.
Last Answer : ±5 percent.
Description : For what is the center tap on a transformer used?
Last Answer : Provides capability of developing two high-voltage outputs
Description : What limits the tuning range around the center frequency of a reflex klystron in a particular mode of operation?
Last Answer : The half-power points of the mode.
Description : What type of force acts ONLY through the center of gravity of a gyro, and does NOT cause precession?
Last Answer : Force of translation.
Description : Which topology (bus, ring, star, or tree) has a center hub interconnecting the equipments?
Last Answer : Star.
Description : To what extent do you think your supervisor(s) and management want you to be happy and inspired at work? Managers and Supervisors: To what extent do you want your employees to be happy and inspired at work?
Last Answer : answer:Not at all. We were taken over a year and a half ago. When the appointed President of our subsidiary came to meet us in a “town hall” meeting, he told us “we don’t care about you being happy or having fun at work. We are here to work.”
Description : Can I hire whomever I please as a safety supervisor in the oil and gas industry or are there minimum levels of certifications required to work such a position legally speaking?
Last Answer : I would hope there are qualified people since they are dealing with the lives of workers. I suggest you contact the agency that provides information on what the qualifications are in that business.
Description : What's missing from the following work history Johnson Building Supply, Phoenix, AZ Warehouse supervisor 2000-2006 job title start/end dates company description of responsibilities none of the above?
Last Answer : Description of responsibilities
Description : What is the work of responsible Supervisor
Last Answer : Responsibilities of responsible supervisor Examine the worksite with permit applicant before authorizing (A) class permit. Decide whether it is necessary to restrict other work at the site while the class ... brief detail of the work which can be seen when permit is placed in a permit rack
Description : Parcel sorting case must always be kept locked when the work of the Sorting is not going on and the key must remain a) With the HSA b) With the supervisor c) With the parcel sorting assistant d) None of these
Last Answer : c) With the parcel sorting assistant
Description : In a mail office when the work is not going on, the registration sorting case must be locked and the key should remain a) With the HSA/Supervisor b) With the jamedar of the set c) With the Registration SA d) None of these
Last Answer : c) With the Registration SA
Description : What kind of supervisor do you work best for? Provide examples.
Last Answer : Don't speak badly about any of your former supervisors, instead speak to the attributes you liked best. Can you adapt if a supervisor has traits you do not like?