What are three ways of controlling the amount of transmitter-generated emi?

What are three ways of controlling the amount of  transmitter-generated emi?
by

1 Answer

Answer :

(a) filtering and shielding of the transmitter (b) limiting bandwidth  (c) cutting the antenna to the
by

Related questions

What are three ways of controlling radiated emi during transmission?

Description : What are three ways of controlling radiated emi during transmission?

Last Answer : a) physical separation of the antenna (b) limiting bandwidth of the antenna (c) use of directional antennas

Motors, switches, voltage regulators, generators, etc., are a few examples of emi sources. What type of emi comes from these sources?

Description : Motors, switches, voltage regulators, generators, etc., are a few examples of emi sources. What type of emi comes from these sources?

Last Answer : Man-made.

Thunderstorms, snowstorms, cosmic sources, the sun, etc., are a few examples of emi sources. What type of emi comes

Description : Thunderstorms, snowstorms, cosmic sources, the sun, etc., are a few examples of emi sources. What type of emi comes

Last Answer : Natural.

What are the two main sources of emi with which radio waves must compete?

Description : What are the two main sources of emi with which radio waves must compete?

Last Answer : Natural and man-made interference.

What are the two emi transmission methods?

Description : What are the two emi transmission methods?

Last Answer : . Conduction and radiation.

What is emi?

Description : What is emi?

Last Answer : Electromagnetic interference.

. Which type of variable resistor should you select for controlling a large amount of current?

Description : . Which type of variable resistor should you select for controlling a large amount of current?

Last Answer : The rheostat.

What are the three parts of a fiber optic transmitter?

Description : What are the three parts of a fiber optic transmitter?

Last Answer : Interface circuit, source drive circuit, and an optical source.

What is the full form of 'EMI' ? -How To ?

Description : What is the full form of 'EMI' ? -How To ?

Last Answer : The full form of 'EMI' is Equated Monthly Instalment

Why Fiber Optics Cable is EMI Free ?

Description : Why Fiber Optics Cable is EMI Free ?

Last Answer : Since fiber optics is made of insulating material, it is free from electromagnetic effects or EMI. The components of fiber optics are soda , boro silicate , soda lime silicate and soda alumina silicate ... and plastic is also an insulating material. As a result, fiber optics is always EMI free

Want an Emi number for a Xiaomi Redmi 6 phone ? Can anyone give imei of xiaomi redmi 8a phone . Tell me what color it is and what color it is.

Description : Want an Emi number for a Xiaomi Redmi 6 phone ? Can anyone give imei of xiaomi redmi 8a phone . Tell me what color it is and what color it is.

Last Answer : Imei number of any mobile does not match with any mobile. To know the Imei number of any mobile , dial * # 06 # from that phone.

What is the full form of EMI ?

Last Answer : Equal Monthly Installment of EMI

Is the interference coming from other communications channels? A. Jitter B. Crosstalk C. RFI D. EMI

Description : Is the interference coming from other communications channels? A. Jitter B. Crosstalk C. RFI D. EMI

Last Answer : B. Crosstalk

Unwanted radio signal on assigned frequency. A. Splatter B. RFI C. Noise D. EMI

Description : Unwanted radio signal on assigned frequency. A. Splatter B. RFI C. Noise D. EMI

Last Answer : C. Noise

Fiber-optic cables do not: a. carry current b. cause crosstalk c. generate EMI d. all of the above

Description : Fiber-optic cables do not: a. carry current b. cause crosstalk c. generate EMI d. all of the above

Last Answer : d. all of the above

What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Description : What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Last Answer : Use only one receiver so as not to overload the tester.

What is the most likely problem if the transmitter shaft reads 0º when the receiver shaft indicates 180º?

Description : What is the most likely problem if the transmitter shaft reads 0º when the receiver shaft indicates 180º?

Last Answer : The rotor leads on either the transmitter or the receiver are reversed.

What is the relationship between the transmitter and receiver stator voltages when their rotors are in correspondence?

Description : What is the relationship between the transmitter and receiver stator voltages when their rotors are in correspondence?

Last Answer : The voltages are equal and oppose each other.

What is the physical difference between a synchro transmitter and a synchro receiver?

Description : What is the physical difference between a synchro transmitter and a synchro receiver?

Last Answer : A synchro receiver uses some form of damping to retard excessive oscillations or spinning.

Describe the zero-position of a synchro transmitter.

Description : Describe the zero-position of a synchro transmitter.

Last Answer : The transmitter is in its zero-position when the rotor is aligned with the S2 stator winding.

What unit of measurement refers to the torque of a synchro transmitter

Description : What unit of measurement refers to the torque of a synchro transmitter

Last Answer : Ounce-inches.

What are some disadvantages of operating a transmitter at or near the muf?

Description : What are some disadvantages of operating a transmitter at or near the muf?

Last Answer : Frequent signal fading and dropouts.

Transmitter power readings are most often referenced to what power level?

Description : Transmitter power readings are most often referenced to what power level?

Last Answer : 1 milliwatt.

Where should the transmitter spectrum be located with respect to the receiver response curve?

Description : Where should the transmitter spectrum be located with respect to the receiver response curve?

Last Answer : In the center.

The spectrum of a radar transmitter describes what characteristic of the output pulse?

Description : The spectrum of a radar transmitter describes what characteristic of the output pulse?

Last Answer : Frequency distribution

Immediately after the transmitter fires, stc reduces the receiver gain to what level?

Description : Immediately after the transmitter fires, stc reduces the receiver gain to what level?

Last Answer : Zero.

What type of klystron is used as the final stage of a power- amplifier transmitter?

Description : What type of klystron is used as the final stage of a power- amplifier transmitter?

Last Answer : Multicavity klystron.

What controls transmitter pulse width?

Description : What controls transmitter pulse width?

Last Answer : The modulator.

What transmitter component allows the radiation of a large number of discrete frequencies over a wide band?

Description : What transmitter component allows the radiation of a large number of discrete frequencies over a wide band?

Last Answer : . Frequency synthesizer.

What type of klystron is used as the final stage of a power- amplifier transmitter?

Description : What type of klystron is used as the final stage of a power- amplifier transmitter?

Last Answer : Multicavity klystron.

What controls transmitter pulse width?

Description : What controls transmitter pulse width?

Last Answer : The modulator.

In an externally synchronized radar, what determines the prr of the transmitter?

Description : In an externally synchronized radar, what determines the prr of the transmitter?

Last Answer : The master oscillator.

What transmission method uses a stable cw reference oscillator, which is locked in phase with the transmitter frequency?

Description : What transmission method uses a stable cw reference oscillator, which is locked in phase with the transmitter frequency?

Last Answer : Pulse-Doppler.

What factor determines the difference between the transmitted frequency and the received frequency in an fm transmitter?

Description : What factor determines the difference between the transmitted frequency and the received frequency in an fm transmitter?

Last Answer : Travel time.

The beat frequency in a swept-frequency transmitter provides what contact information?

Description : The beat frequency in a swept-frequency transmitter provides what contact information?

Last Answer : Range.

When a transmitter uses a high-power oscillator to produce the output pulse, what switches the oscillator on and off?

Description : When a transmitter uses a high-power oscillator to produce the output pulse, what switches the oscillator on and off?

Last Answer : High-voltage pulse from the modulator.

What type of radar transmitter power is measured over a period of time?

Description : What type of radar transmitter power is measured over a period of time?

Last Answer : Average power.

What vswr is a perfect match between a transmitter and its load?

Description : What vswr is a perfect match between a transmitter and its load?

Last Answer : 1 to 1.

What is the result of an impedance mismatch between a receiver or transmitter and its transmission line or antenna?

Description : What is the result of an impedance mismatch between a receiver or transmitter and its transmission line or antenna?

Last Answer : High vswr, which equates to poor reception or a loss of power output.

All the power sent down a transmission line from a transmitter can be transferred to an antenna under what optimum conditions?

Description : All the power sent down a transmission line from a transmitter can be transferred to an antenna under what optimum conditions?

Last Answer : When the characteristic impedance of the transmission line and the load impedance are equal.

What term is used for the end of the transmission line that is connected to a transmitter?

Description : What term is used for the end of the transmission line that is connected to a transmitter?

Last Answer : Input end, generator end, transmitter end, sending end, and source.

What connecting link is used to transfer energy from a radio transmitter to its antenna located on

Description : What connecting link is used to transfer energy from a radio transmitter to its antenna located on

Last Answer : Transmission line.

List five common fiber optic transmitter packages.

Description : List five common fiber optic transmitter packages.

Last Answer : TO can, DIP, butterfly lead microcircuits, circuit cards, and stand-alone optical fiber converters.

Which part of a fiber optic transmitter converts the processed electrical signal to an optical signal?

Description : Which part of a fiber optic transmitter converts the processed electrical signal to an optical signal?

Last Answer : The optical source.

What is the range of earth terminal transmitter output power?

Description : What is the range of earth terminal transmitter output power?

Last Answer : Up to 20 kilowatts.

In an fm transmitter, when does an oscillator generate only a steady frequency?

Description : In an fm transmitter, when does an oscillator generate only a steady frequency?

Last Answer : When no modulation is present.

What purpose does a microphone perform in an AM transmitter?

Description : What purpose does a microphone perform in an AM transmitter?

Last Answer : It converts audio (sound) into electrical energy.

What is the final stage of a transmitter?

Description : What is the final stage of a transmitter?

Last Answer : Power amplifier.

What is the function of the oscillator in a cw transmitter?

Description : What is the function of the oscillator in a cw transmitter?

Last Answer : It generates an rf carrier at a given frequency within required limits.

What are the four basic transmitter types?

Description : What are the four basic transmitter types?

Last Answer : Am, fm, cw, ssb.