If you used 600 W of power for 60 h, you have used?

If you used 600 W of power for 60 h, you have used?

A.36 kWh

B.3.6 kWh

C.10 kWh

D.1 kWh
by

1 Answer

Answer :

If you used 600 W of power for 60 h, you have used?

A.36 kWh

B.3.6 kWh

C.10 kWh

D.1 kWh

by
by
A

Related questions

Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open?

Description : Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open?

Last Answer : Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open the other two bulbs will light.

How many watt-hours represent 65 W used for 18 h?

Description : How many watt-hours represent 65 W used for 18 h? A.11.7 Wh B.1,170 Wh C.11,700 Wh D.117,000 Wh

Last Answer : How many watt-hours represent 65 W used for 18 h? A.11.7 Wh B.1,170 Wh C.11,700 Wh D.117,000 Wh

The L.C.M of two numbers is 14 times their H.C.F . The sum of the L.C.M. and the H.C.F . is 600. If one number is 280 , then the other number is (a) 40 (b) 60 (c) 80 (d) 100

Description : The L.C.M of two numbers is 14 times their H.C.F . The sum of the L.C.M. and the H.C.F . is 600. If one number is 280 , then the other number is (a) 40 (b) 60 (c) 80 (d) 100

Last Answer : 80

What is the hydrostatic pressure at the bottom of a pool 6 meters deep? w) 60,000 Newtons per meter squared x) 6,000 Newtons per meter squared y) 600 Newtons per meter squared z) 60 Newtons per meter squared

Description : What is the hydrostatic pressure at the bottom of a pool 6 meters deep? w) 60,000 Newtons per meter squared x) 6,000 Newtons per meter squared y) 600 Newtons per meter squared z) 60 Newtons per meter squared

Last Answer : ANSWER: W -- 60,000 NEWTONS PER METER SQUARED

How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Description : How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Last Answer : (C) 1000 hrs.

How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Description : How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Last Answer : (E) 2000 hrs.

Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above

Description : Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above

Last Answer : G. 600-1000 rpm

The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330

Description : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

Last Answer : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of

Description : A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

Last Answer : A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

In 0.025 W, there are?

Description : In 0.025 W, there are? A.25 kW B.0.00025 mW C.2,500 μW D.25 mW

Last Answer : In 0.025 W, there are? A.25 kW B.0.00025 mW C.2,500 μW D.25 mW

With three resistances connected in parallel, if each dissipates 20 W the ...

Description :  With three resistances connected in parallel, if each dissipates 20 W the total power supplied by the voltage source equals?

Last Answer : Power is the only thing which is additive in both connection whether it is parallel or series connection so total power consumed will addition of all individual power =20+20+20 = 60 watt

Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

Description : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

Last Answer : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as 2 : 5.

A 40 W bulb is connected in series with a room heater. If now 40 W bulb is replaced by...

Description : A 40 W bulb is connected in series with a room heater. If now 40 W bulb is replaced by 100 W bulb, the heater output will?

Last Answer : A 40 W bulb is connected in series with a room heater. If now 40 W bulb is replaced by 100 W bulb, the heater output will increase.

What is the effective radiated power of a repeater with 75 watts transmitter power output, 4 dB feedline loss, 3 dB duplexer and circulator loss, and 10 dB antenna gain? A. 600 W B. 75 W C. 18.75 W D. 150 W

Description : What is the effective radiated power of a repeater with 75 watts transmitter power output, 4 dB feedline loss, 3 dB duplexer and circulator loss, and 10 dB antenna gain? A. 600 W B. 75 W C. 18.75 W D. 150 W

Last Answer : D. 150 W

A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W

Description : A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W

Last Answer : Ans: 0.04, 1160 W

The rotor power output of a 3-phase induction motor is 15 KW and corresponding slip is 4%. The rotor copper loss will be (A) 600 W. (B) 625 W (C) 650 W (D) 700 W

Description : The rotor power output of a 3-phase induction motor is 15 KW and corresponding slip is 4%. The rotor copper loss will be (A) 600 W. (B) 625 W (C) 650 W (D) 700 W

Last Answer : Ans: B Rotor copper losses = rotor input- rotor output and output = (1-s) input ∴ Input = output/(1-s) = 15000 /1-0.04 = 15625 ∴ loss = 15625 -1500 = 625 watt

How long would the Suns initial supply of hydrogen last in both seconds and yrs as it fuses 600 bil. k ea. second total H avail. in its lifetime is 1.8x10 to 2nd pwr?

Description : How long would the Suns initial supply of hydrogen last in both seconds and yrs as it fuses 600 bil. k ea. second total H avail. in its lifetime is 1.8x10 to 2nd pwr?

Last Answer : You are supposed to divide the total amount of hydrogen, by the consumption per second. That will give you the time in seconds. You can then convert that to years, by dividing by the number of seconds in a year.

Speed of band operated machines chaff cutter having two knives F. 35 rpm G. 50 rpm H. 600 rpm I. 1000 rpm

Description : Speed of band operated machines chaff cutter having two knives F. 35 rpm G. 50 rpm H. 600 rpm I. 1000 rpm

Last Answer : F. 35 rpm

A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Description : A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Last Answer : e. Either of (A) and (C)

A man goes into a hardware store. He asks the clerk 'How much is 6?' Which the clerk responds with '6 is $0.50.' 'How much is 60?' The man asks. '$1.00.' Answers the clerk. 'Okay, I will take 600.' Says the man. 'That will be $1.50, please!' Says the clerk. The man pays and leaves. What did the man buy? -Riddles

Description : A man goes into a hardware store. He asks the clerk 'How much is 6?' Which the clerk responds with '6 is $0.50.' 'How much is 60?' The man asks. '$1.00.' Answers the clerk. 'Okay, I will take ... . 'That will be $1.50, please!' Says the clerk. The man pays and leaves. What did the man buy? -Riddles

Last Answer : He bought house numbers! Each number is $0.50!

If a bus keeps moving at 60 km/hr, how many hours will it take for the bus to travel the 600 km distance from Manila to Sorsogon?

Description : If a bus keeps moving at 60 km/hr, how many hours will it take for the bus to travel the 600 km distance from Manila to Sorsogon?

Last Answer : 10 hours

If Mr. Pandey bought 200 shares of BOK stock at Rs 450 per share. He bought the stock on margin of 60 . The stock is now trading at Rs 600 per share and the brokerage firm has recently lowered initial?

Description : If Mr. Pandey bought 200 shares of BOK stock at Rs 450 per share. He bought the stock on margin of 60 . The stock is now trading at Rs 600 per share and the brokerage firm has recently lowered initial?

Last Answer : Need answer

The daily water allowance for normal adult (60 kg) is about (A) 200–600 ml (B) 500–800 ml (C) 800–1500 ml (D) 1800–2500 ml

Description : The daily water allowance for normal adult (60 kg) is about (A) 200–600 ml (B) 500–800 ml (C) 800–1500 ml (D) 1800–2500 ml

Last Answer : Answer : D

If the synchronous speed of a 12 pole, polyphase, induction motor operating at 60 Hz were 600 RPM, how many poles will be required in a similar motor operating at the same frequency but having a synchronous speed of 900 RPM? A. 4 B. 6 C. 8 D. 18

Description : If the synchronous speed of a 12 pole, polyphase, induction motor operating at 60 Hz were 600 RPM, how many poles will be required in a similar motor operating at the same frequency but having a synchronous speed of 900 RPM? A. 4 B. 6 C. 8 D. 18

Last Answer : Answer: C

1-CCS is equal to? A. 60 B. 100 C. 600 D. 1

Description : 1-CCS is equal to? A. 60 B. 100 C. 600 D. 1

Last Answer : B. 100

What is the baseband frequency of standard FDM basic supergroup? A. 312 to 552 kHz B. 300 to 600 kHz C. 60 to 2540 kHz D. 60 to 108 kHz

Description : What is the baseband frequency of standard FDM basic supergroup? A. 312 to 552 kHz B. 300 to 600 kHz C. 60 to 2540 kHz D. 60 to 108 kHz

Last Answer : A. 312 to 552 kHz

. In a solution containing 0.30 Kg mole of solute and 600 kg of solvent, the molality is (A) 0.50 (B) 0.60 (C) 1 (D) 2

Description : . In a solution containing 0.30 Kg mole of solute and 600 kg of solvent, the molality is (A) 0.50 (B) 0.60 (C) 1 (D) 2

Last Answer : (A) 0.50

Which of the following statements regarding cash flow patterns (for time periods 0, 1, 2, 3, and 4) is correct? A. The sequence of -Rs.100, Rs.50, Rs.40, Rs.60, and Rs.50 is a non-conventional cash flow pattern B. The sequence of -Rs.100, Rs.600, -Rs.1,100, Rs.600, and Rs.20 potentially has a maximum of two internal rates of return. C. The sequence of +Rs.100, -Rs.1,100, and Rs.1,600 is a conventional cash flow pattern. D. The sequence of -Rs.50, Rs.50, Rs.70, Rs.60, and -Rs.150 potentially has at most two internal rates of return.

Description : Which of the following statements regarding cash flow patterns (for time periods 0, 1, 2, 3, and 4) is correct? A. The sequence of -Rs.100, Rs.50, Rs.40, Rs.60, and Rs.50 is a non-conventional cash ... -Rs.50, Rs.50, Rs.70, Rs.60, and -Rs.150 potentially has at most two internal rates of return.

Last Answer : B. The sequence of -Rs.100, Rs.600, -Rs.1,100, Rs.600, and Rs.20 potentially has a maximum of two internal rates of return.

The frequency in rad/sec of a wave with velocity of that of light and phase constant of 20 units is (in GHz) a) 6 b) 60 c) 600 d) 0.6

Description : The frequency in rad/sec of a wave with velocity of that of light and phase constant of 20 units is (in GHz) a) 6 b) 60 c) 600 d) 0.6

Last Answer : a) 6

A liquid is pumped at the rate of 600 litres using 1000 rpm. If the rpm is changed to 1100, the liquid pumped is __________ litres. (A) 600(B) 660 (C) 1.1 (D) 60

Description : A liquid is pumped at the rate of 600 litres using 1000 rpm. If the rpm is changed to 1100, the liquid pumped is __________ litres. (A) 600 (B) 660 (C) 1.1 (D) 60

Last Answer : (B) 660

.If a 1:600 dilution of a test compound kills a standard population of Staphylococcus aureus in 10minutes but not 5 minutes while a 1:60 dilution of phenol kills the population in thesame time, what is the phenol coefficient of the test compound? A- 1 B- 5 C- .10 D- .50

Description : .If a 1:600 dilution of a test compound kills a standard population of Staphylococcus aureus in 10minutes but not 5 minutes while a 1:60 dilution of phenol kills the population in thesame time, what is the phenol coefficient of the test compound? A- 1 B- 5 C- .10 D- .50

Last Answer : .10

The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes

Description : The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes

Last Answer : Answer: Option B

It is required to maintain a therapeutic concentration of 10 microgram/mL for 12 hours of a drug having half life of 1.386 hr and Vd of 5 L. The dose required in a sustained release product will be (A) 600 mg (B) 300 mg (C) 30 mg (D) 60 mg

Description : It is required to maintain a therapeutic concentration of 10 microgram/mL for 12 hours of a drug having half life of 1.386 hr and Vd of 5 L. The dose required in a sustained release product will be (A) 600 mg (B) 300 mg (C) 30 mg (D) 60 mg

Last Answer : (B) 300 mg

worker is allowed 60 hours to complete the job on a guaranteed wage of Rs. 10 per hour. Under the Rowan Plan, he gets an hourly wage of Rs. 12 per hour. For the same saving in time, how much he will get under the Halsey Plan? (a) Rs. 720 (b) Rs. 540 (c) Rs. 600 (d) Rs. 900

Description : worker is allowed 60 hours to complete the job on a guaranteed wage of Rs. 10 per hour. Under  the Rowan Plan, he gets an hourly wage of Rs. 12 per hour. For the same saving in time, how much he  will get under the Halsey Plan? (a) Rs. 720 (b) Rs. 540 (c) Rs. 600  (d) Rs. 900

Last Answer : (b) Rs. 540

What is the assessed GMT service life of 60 kg 90 UTS rail? a. 650 GMT b. 600 GMT c. 800 GMT* d. 500 GMT

Description : What is the assessed GMT service life of 60 kg 90 UTS rail? a. 650 GMT b. 600 GMT c. 800 GMT* d. 500 GMT

Last Answer : c. 800 GMT*

Amount of Topic 10% for 4000 m2 if rate of clodinafop is 60 g/ha. a). 600 g b). 480 g c). 300 g d). 240 g

Description : Amount of Topic 10% for 4000 m2 if rate of clodinafop is 60 g/ha. a). 600 g b). 480 g c). 300 g d). 240 g

Last Answer : d). 240 g

Anitha travels 400 km by bus at 70 km/hr, 600 km by train at 80km/hr, 250 km by bike at 60 km/hr and 50 kn by car at 40 km/hr. what is the average speed for the total distance? a) 68.45 b) 69.45 c) 67.45 d) 69.77

Description : Anitha travels 400 km by bus at 70 km/hr, 600 km by train at 80km/hr, 250 km by bike at 60 km/hr and 50 kn by car at 40 km/hr. what is the average speed for the total distance? a) 68.45 b) 69.45 c) 67.45 d) 69.77

Last Answer : D Total distance = (400+250+50+600)km =1300 km Total time taken = (400/70 + 600/80+250/60+50/40) hrs =(40/7 +60/8+25/6+5/4) =(24*40)+(21*60)+(28*25)+(42*5) / 168 =960+1260+700+210 / 168 =(3130 / 168) Average speed =(1300*168 / 3130) km/hr =218400/3130 =69.77 km/hr

An ideal power supply consist of

Description : An ideal power supply consist of   (A) Very small output resistance (B) Zero Internal resistance (C) Very large input resistance (D) Very large output resistance

Last Answer : An ideal power supply consist of Zero Internal resistance 

In order to get maximum power transfer from a capacitive source, the load must?

Description : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Last Answer : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

If it takes 400 ms to use 12,000 J of energy, the power is?

Description : If it takes 400 ms to use 12,000 J of energy, the power is? A.30 kW B.30 W C.3 W D.300 kW

Last Answer : If it takes 400 ms to use 12,000 J of energy, the power is? A.30 kW B.30 W C.3 W D.300 kW

A constant load power means a uniform conversion of?

Description : A constant load power means a uniform conversion of? A.mechanical to electrical energy B.electrical to mechanical energy C.current to voltage D.voltage to current

Last Answer : A constant load power means a uniform conversion of? A.mechanical to electrical energy B.electrical to mechanical energy C.current to voltage D.voltage to current

Coordinate of â–¡ABCD is WCS are: lowermost corner A(2,2) & diagonal corner are C(8,6). W.r.t MCS. The coordinates of origin of WCS system are (5,4). If the axes of WCS are at 600 in CCW w.r.t. the axes of MCS. Find new vertices of point A in MCS. a.(4.268, 6.732) b.(5.268, 6.732) c.(4.268, 4.732) d.(6.268, 4.732)

Description : Coordinate of â- ABCD is WCS are: lowermost corner A(2,2) & diagonal corner are C(8,6). W.r.t MCS. The coordinates of origin of WCS system are (5,4). If the axes of WCS are at 600 in CCW w.r.t. the axes of MCS. Find new ... in MCS. a.(4.268, 6.732) b.(5.268, 6.732) c.(4.268, 4.732) d.(6.268, 4.732)

Last Answer : a.(4.268, 6.732)

A hiker stands at the bottom of steep hill. The hiker may follow a straight line path to the top of the hill, a distance of 300 feet, or she may follow a zig-zag path to the top of the hill and walk a distance of 600 feet. The work done by the force of gravity along the zig-zag path is how many times the work going along the straight path? Is it: w) equal x) twice y) 4 times z) 8 times?

Description : A hiker stands at the bottom of steep hill. The hiker may follow a straight line path to the top of the hill, a distance of 300 feet, or she may follow a zig-zag path to the top of the hill and walk a ... times the work going along the straight path? Is it: w) equal x) twice y) 4 times z) 8 times?

Last Answer : ANSWER: W -- EQUAL 

A 500 kVA, 3-phase transformer has iron losses of 300 W and full load copper losses of 600 W. The percentage

Description : A 500 kVA, 3-phase transformer has iron losses of 300 W and full load copper losses of 600 W. The percentage load at which the transformer is expected to have maximum efficiency is  (A) 50.0% (B) 70.7% (C) 141.4% (D) 200.0%

Last Answer : A 500 kVA, 3-phase transformer has iron losses of 300 W and full load copper losses of 600 W. The percentage load at which the transformer is expected to have maximum efficiency is 70.7%

The transistor configuration to connect 4 W speaker with 600 W output impedance audio

Description : The transistor configuration to connect 4 W speaker with 600 W output impedance audio amplifier is • Common Emitter • Common Base • Common Collector • None of the above.

Last Answer : The transistor configuration to connect 4 W speaker with 600 W output impedance audio amplifier is Common Collector

If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Last Answer : (A) wQH/15

149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Description : 149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Last Answer : Answer: Option C

Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s.  a) 744.8 hp  b) 0.998 hp  c) 746 hp  d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h

Description : Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s.  a) 744.8 hp  b) 0.998 hp  c) 746 hp  d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h

Last Answer : 0.998 hp

Two bulbs when connected in parallel to a source take 60 W each, the power consumed, when they are connected in series with the same source is

Description : Two bulbs when connected in parallel to a source take 60 W each, the power consumed, when they are connected in series with the same source is

Last Answer : Two bulbs when connected in parallel to a source take 60 W each, the power consumed, when they are connected in series ... W B. 30 W C. 60 W D. 120 W

Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Description : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Last Answer : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power ... B. 160 W C. `37.5 W` D. 60 W