Which of the following types of internal combustion engine is generally used as portable engine for pumping and electricity generation? 1. Spark ignition 2. Stationary 3. Vertical single cylinder 3. all of these

Which of the following types of internal combustion engine is generally used as portable engine for pumping and electricity generation? 1. Spark ignition 2. Stationary 3. Vertical single cylinder 3. all of these
by

1 Answer

Answer :

ans 2

by

Related questions

The violent noises heard in an engine during the process of combustion after the position has passed over the top dead center is known as? 1. Stationary 2. Spark ignition 3. Detonation 4. all of these

Description : The violent noises heard in an engine during the process of combustion after the position has passed over the top dead center is known as? 1. Stationary 2. Spark ignition 3. Detonation 4. all of these

Last Answer :     <!-- [endif] -->ans 3

iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Description : iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Last Answer : ∙ Torque is a function of thermal efficiency

What refers to the minimum temperature at which combustion can be sustained?  A. Burn temperature  B. Kindle temperature  C. Spark temperature  D. Ignition temperature

Description : What refers to the minimum temperature at which combustion can be sustained?  A. Burn temperature  B. Kindle temperature  C. Spark temperature  D. Ignition temperature

Last Answer : Ignition temperature

For spark ignition engine, the equivalence ratio of mixture entering the combustion chamber has values (A) for idling and for peak power conditions (B) for both idling and peak power conditions (C) for idling and for peak power conditions (D) for both idling and peak power conditions

Description : For spark ignition engine, the equivalence ratio of mixture entering the combustion chamber has values (A) for idling and for peak power conditions (B) for both idling and peak power conditions (C) for idling and for peak power conditions (D) for both idling and peak power conditions

Last Answer : ANSWER (B) for both idling and peak power conditions

Air-petrol ratio for maximum power generation in spark ignition engine is about (A) 6 : 1 (B) 12 : 1 (C) 18 : 1

Description : Air-petrol ratio for maximum power generation in spark ignition engine is about (A) 6 : 1 (B) 12 : 1 (C) 18 : 1

Last Answer : Option B

The compression ratio in a Spark Ignition (SI) engine is generally in between a. 7 to 10 b. 10 to 14 c. 14 to 18 d. 18 to 22 (Ans:a)

Description : The compression ratio in a Spark Ignition (SI) engine is generally in between a. 7 to 10 b. 10 to 14 c. 14 to 18 d. 18 to 22 (Ans:a)

Last Answer : Which of the following is not true for two stroke engine as compared to four stroke engine? a. Less cooling is required b. Greater lubrication is required c. More uniform torque on crankshaft d. Complete exhaust of products of combustion (Ans:a)

Which of the following is a device used on a tractor or stationary engine for maintaining nearly constant engine speed under varying loads? 1. Volatility of fuel 2. Governor 3. Pre-ignition 4. carburetor

Description : Which of the following is a device used on a tractor or stationary engine for maintaining nearly constant engine speed under varying loads? 1. Volatility of fuel 2. Governor 3. Pre-ignition 4. carburetor

Last Answer : <!-- [if !supportLists] -->1.   <!-- [endif] -->ans 2  

Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Description : Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Last Answer : ANSWER d. all of the above

In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Description : In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Last Answer : ANSWER : C

The knocking in spark ignition engines can be reduced by a. Retarding the spark. b. Increasing the engine speed. c. Both a and b d. None of these.

Description : The knocking in spark ignition engines can be reduced by a. Retarding the spark. b. Increasing the engine speed. c. Both a and b d. None of these.

Last Answer : ANSWER c. Both a and b.

Which of the following is not related to spark ignition engine? a. fuel injector b. spark plug c. flywheel d. distributor

Description : Which of the following is not related to spark ignition engine? a. fuel injector b. spark plug c. flywheel d. distributor

Last Answer : ANSWER a. fuel injector

Which of the following engine can work on very lean mixture a. Spark ignition engine b. compression ignition engine c. two stroke engine d. Four stroke engine

Description : Which of the following engine can work on very lean mixture a. Spark ignition engine b. compression ignition engine c. two stroke engine d. Four stroke engine

Last Answer : ANSWER b. compression ignition engine

The knocking in spark ignition engines can be reduced by a. Retarding the spark. b. Increasing the engine speed. c. Both a and b. d. None of these.

Description : The knocking in spark ignition engines can be reduced by a. Retarding the spark. b. Increasing the engine speed. c. Both a and b. d. None of these.

Last Answer : ANSWER c. Both a and b

A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel cycle is higher than the Otto cycle, at a fixed compression ratio c. The compression ratio of a diesel engine is higher than that of an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Description : A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel ... an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Last Answer : ANSWER c. The compression ratio of a diesel engine is higher than that of an S.I engine

Which of the following cycle is used for Spark Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : Which of the following cycle is used for Spark Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer a. Otto cycle

Spark plug is provided in a/an (A) Engine having carburettor (B) Diesel engine (C) Compression ignition engine (D) Both (B) & (C)

Description : Spark plug is provided in a/an (A) Engine having carburettor (B) Diesel engine (C) Compression ignition engine (D) Both (B) & (C)

Last Answer : (A) Engine having carburettor

With increase in __________ Knocking tendency in a spark ignition petrol engine decreases. (A) Supercharging (B) Wall temperature (C) Compression ratio (D) Engine speed

Description : With increase in __________ Knocking tendency in a spark ignition petrol engine decreases. (A) Supercharging (B) Wall temperature (C) Compression ratio (D) Engine speed

Last Answer : Option D

The most popular firing order in a 4-cylinder inline internal combustion engine is a. 1-2-3-4 b. 1-3-2-4 c. 1-3-4-2 d. 1-2-4-3

Description : The most popular firing order in a 4-cylinder inline internal combustion engine is a. 1-2-3-4 b. 1-3-2-4 c. 1-3-4-2 d. 1-2-4-3

Last Answer : ANSWER b. 1-3-4-2

Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Description : Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Last Answer : 2

In a morse test for a 2 cylinder, 2 S SI engine, the brake power was 9 kW. Whereas the brake power of individual cylinders with spark cut off were 4.25 kW and 3.75 kW. The mecheffic of the engine is (a) 90% (b) 80% (c) 45.5% (d) 52.5%

Description : In a morse test for a 2 cylinder, 2 S SI engine, the brake power was 9 kW. Whereas the brake power of individual cylinders with spark cut off were 4.25 kW and 3.75 kW. The mecheffic of the engine is (a) 90% (b) 80% (c) 45.5% (d) 52.5%

Last Answer : Ans :a

In diesel engine, the fuel is ignited by a. spark b. injected fuel c. heat resulting from compressing air that is supplied for combustion d. ignitor

Description : In diesel engine, the fuel is ignited by a. spark b. injected fuel c. heat resulting from compressing air that is supplied for combustion d. ignitor

Last Answer : ANSWER c. heat resulting from compressing air that is supplied for combustion

ernal combustion engine that does not use spark plug is

Description : ernal combustion engine that does not use spark plug is

Last Answer : Diesel engine.

Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Description : Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Last Answer : ANSWER : C

In compression ignition (CI) engine, the compression ratio is a. Cylinder volume / Clearance volume b. Swept Volume / Cylinder Volume c. Clearance volume / Cylinder volume d. Cylinder volume / Swept volume (Ans:a)

Description : In compression ignition (CI) engine, the compression ratio is a. Cylinder volume / Clearance volume b. Swept Volume / Cylinder Volume c. Clearance volume / Cylinder volume d. Cylinder volume / Swept volume (Ans:a)

Last Answer : In two stroke engine there is one power stroke in _____ of crankshaft rotation. a. 90° b. 180° c. 270° d. 360° (Ans:d)

Explain the effect of the following engine variables on ignition lag and flame propagation: (i) cylinder size (ii) cylinder wall temperature (iii) compression ratio and (iv) inlet air temperature

Description : Explain the effect of the following engine variables on ignition lag and flame propagation: (i) cylinder size (ii) cylinder wall temperature (iii) compression ratio and (iv) inlet air temperature

Last Answer : (i) Cylinder size - Engine of similar design generally run at the same speed. This is achieved by smaller engine having larger RPM and larger engines having smaller RPM. Due to the same ... all reduces the ignition lag. Pre-increase in the intake temperature and pressure increases the flame speed.

Combustion in compression ignition engine is a. homogeneous b. heterogeneous c. laminar d. turbulent

Description : Combustion in compression ignition engine is a. homogeneous b. heterogeneous c. laminar d. turbulent

Last Answer : ANSWER b. heterogeneous

Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Description : Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Last Answer : External combustion engine

Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Description : Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Last Answer : Internal Combustion Engine

It is a mower with a knife made of several serrated triangular sections that reciprocate against stationary fingers. a. Rotary mower c. Cylinder mower. d. None of above

Description : It is a mower with a knife made of several serrated triangular sections that reciprocate against stationary fingers. a. Rotary mower c. Cylinder mower. d. None of above

Last Answer : Ans-   b. Reciprocating mower  

Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at high speed. C. To permit the generation to deliver current to the battery or to the lightening and ignition circuit. D. None of the above

Description : Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at ... deliver current to the battery or to the lightening and ignition circuit. D. None of the above

Last Answer : A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces.

Why am i only getting spark from the coil when i release the ignition?

Description : Why am i only getting spark from the coil when i release the ignition?

Last Answer : Malow, I first suspect the switch itself. I'm guessing that when you rotate the switch it loses contact inside it. Those switches are ususally pretty simple and very cheap at the parts store. They make an ... that looks similar to yours and try it. Wish I was there I would be happy to help!!!

In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Description : In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Last Answer : Answer: d Explanation: None.

When a vehicle passes, TV reception gets distorted. This is because – (1) metal reflects radiowaves (2) spark plug creates electromagnetic disturbances (3) vehicle pollution affects the performance of the TV components (4) modern vehicles use electro ignition system

Description : When a vehicle passes, TV reception gets distorted. This is because – (1) metal reflects radiowaves (2) spark plug creates electromagnetic disturbances (3) vehicle pollution affects the performance of the TV components (4) modern vehicles use electro ignition system

Last Answer : (2) spark plug creates electromagnetic disturbances Explanation: This is caused due to the interference caused by the electromagnetic waves generated by a passing vehicle. These waves were within the same ... in which two waves superimpose to form a resultant wave of greater or lower amplitude.

When a vehicle passes, TV reception gets distorted. This is because – (1) metal reflects radiowaves (2) spark plug creates electromagnetic disturbances (3) vehicle pollution affects the performance of the TV components (4) modern vehicles use electro ignition system

Description : When a vehicle passes, TV reception gets distorted. This is because – (1) metal reflects radiowaves (2) spark plug creates electromagnetic disturbances (3) vehicle pollution affects the performance of the TV components (4) modern vehicles use electro ignition system

Last Answer : (2) spark plug creates electromagnetic disturbances Explanation: This is caused due to the interference caused by the electromagnetic waves generated by a passing vehicle. These waves were within the same ... in which two waves superimpose to form a resultant wave of greater or lower amplitude.

Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Last Answer : (B) Manganese

State the functions following ignition system components (i) Ignition coil (ii) Distributor (iii)Condenser (iv)Spark plug

Description : State the functions following ignition system components (i) Ignition coil (ii) Distributor (iii)Condenser (iv)Spark plug

Last Answer : Functions following ignition system components: (i) Ignition coil: Ignition coil receives voltage from primary circuit and convert it to very high voltage up to 28000 volts required for spark by means of ... Charge of air and petrol is ignited by means of the spark produced by spark plug.

Define spark ignition, auto ignition, pre ignition, and surface ignition.

Description : Define spark ignition, auto ignition, pre ignition, and surface ignition. 

Last Answer : 1. Spark ignition: The term spark-ignition is ignition of charge (the air-fuel mixture) by a spark across electrodes of a spark plug.  2. Auto ignition: It is spontaneous ignition of ... locations and start propagates across the chamber in an analogous manner to what occurs in normal knock. 

are portable devices capable of estimating the combusting efficiency of furnaces, boilers, or other fossil fuel burning machines. a) Sound analyzer. c) Combustion analyzer. b) Light analyzer. d)Temperature analyzer

Description : are portable devices capable of estimating the combusting efficiency of furnaces, boilers, or other fossil fuel burning machines. a) Sound analyzer. c) Combustion analyzer. b) Light analyzer. d)Temperature analyzer

Last Answer : Combustion analyzer. 

are portable devices capable of estimating the combusting efficiency of furnaces, boilers, or other fossil fuel burning machines. a) Sound analyzer. b) Light analyzer. c) Combustion analyzer. d) Temperature analyzer.

Description : are portable devices capable of estimating the combusting efficiency of furnaces, boilers, or other fossil fuel burning machines. a) Sound analyzer. b) Light analyzer. c) Combustion analyzer. d) Temperature analyzer.

Last Answer : Combustion analyzer.

Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Description : Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Last Answer : ANSWER d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Mention the types of internal combustion engine.

Description : Mention the types of internal combustion engine.

Last Answer : a) Petro engine b) Diesel engine

Liquid fuels can be used to generate electricity in a variety of ways. Which of the following technologies converts liquid fuel directly to electricity without a combustion step? w) turbine x) battery y) fuel cell z) Stirling engine

Description : Liquid fuels can be used to generate electricity in a variety of ways. Which of the following technologies converts liquid fuel directly to electricity without a combustion step? w) turbine x) battery y) fuel cell z) Stirling engine

Last Answer : ANSWER: Y -- FUEL CELL  

Is the cap on the spark plug on the 4and 6 cylinder the same?

Description : Is the cap on the spark plug on the 4and 6 cylinder the same?

Last Answer : do they use the same plugs

How do I remove the cylinder head on a Chev Spark?

Description : How do I remove the cylinder head on a Chev Spark?

Last Answer : If one had manuals for each 100,000,s of vehicle on the road, wewould need sites like this, right?

How do you remove ignition lock cylinder, on a 2006 Dodge Sprinter

Description : How do you remove ignition lock cylinder, on a 2006 Dodge Sprinter

Last Answer : Need Answer

The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Description : The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Last Answer : ANSWER : D

The accumulation of carbon in a cylinder results in increase of a. clearance volume b. volumetric efficiency c. ignition time d. effective compression ratio

Description : The accumulation of carbon in a cylinder results in increase of a. clearance volume b. volumetric efficiency c. ignition time d. effective compression ratio

Last Answer : ANSWER d. effective compression ratio

In compression ignition engines, swirl denotes a. Haphazard motion of the gases in the cylinder b. Rotary motion of the gases in the cylinder. c. Radial motion of the gases in the cylinder. d. None of the above

Description : In compression ignition engines, swirl denotes a. Haphazard motion of the gases in the cylinder b. Rotary motion of the gases in the cylinder. c. Radial motion of the gases in the cylinder. d. None of the above

Last Answer : ANSWER a. Haphazard motion of the gases in the chamber

Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size

Description : Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size 

Last Answer : Comparison between detonation and diesel knock: Parameter To avoid Detonation in SI Engine  To avoid Diesel knock i) Fuel Ignition Temperature High Low ii) Compression Ratio ... Cylinder wall temperature Low High viii) Cylinder size Small Large

A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Description : A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Last Answer : Answer : b