The starting point is to collect and collate _______ months of energy bills a) 24/24. b) 12/24 c) 12/12. d) 24/12

The starting point is to collect and collate _______ months of energy bills
a) 24/24. b) 12/24
c) 12/12. d) 24/12
by

1 Answer

Answer :

24/12
by

Related questions

For consumers, _______ is helpful as it allows you to calculate the actual money you would spend in electricity bills for that particular product. a. Electricity bill c. BEE Star Rating b. User manual d. Water bill

Description : For consumers, _______ is helpful as it allows you to calculate the actual money you would spend in electricity bills for that particular product. a. Electricity bill c. BEE Star Rating b. User manual d. Water bill

Last Answer : BEE Star Rating

It is hard to envisage it is happening from a) energy bills. b) data c) energy production. d) plain data

Description : It is hard to envisage it is happening from a) energy bills. b) data c) energy production. d) plain data

Last Answer : plain data

I retired at 100% SS benefits. My wife is presently 62 and 2 months. Can she begin to collect half of my social security check now?

Description : I retired at 100% SS benefits. My wife is presently 62 and 2 months. Can she begin to collect half of my social security check now?

Last Answer : No if you are alive she can only collect her SS. At 62 she can collect about ¾’s of her benefits.

clash of clans ? I have been playing Clash of Clans for 2 months . Now I have a bleeder in town hall ৮ but in town hall ২. When I start playing the new clash of clans game , I have spent gems on various upgrades without realizing it . I don't understand anything. It will take me years to collect these gems. What should I do now ?

Description : clash of clans ? I have been playing Clash of Clans for 2 months . Now I have a bleeder in town hall ৮ but in town hall ২. When I start playing the new clash of clans game , I have spent gems on ... it . I don't understand anything. It will take me years to collect these gems. What should I do now ?

Last Answer : : To collect gems, you have to cut different trees and stones. By doing this, you can get one, two or even five gems.

Diesel tractors are equipped with a more rugged starting motor ofa) 6 or 12 volts b) 12 or 24 volts c) 6 or 24 volts d) 12 or 36 volts

Description : Diesel tractors are equipped with a more rugged starting motor ofa) 6 or 12 volts b) 12 or 24 volts c) 6 or 24 volts d) 12 or 36 volts

Last Answer : c) 6 or 24 volts

The starting motor used on a powerine tractor may be of a) 6 or 12 volt type b) 12 or 24 volt type c) 16 or 24 volt type d) 6 or 24 volt type

Description : The starting motor used on a powerine tractor may be of a) 6 or 12 volt type b) 12 or 24 volt type c) 16 or 24 volt type d) 6 or 24 volt type

Last Answer : a) 6 or 12 volt type

Electric bills and other fuel bills should be collected _____. a) daily b) monthly c) periodically d)none of the above

Description : Electric bills and other fuel bills should be collected _____. a) daily b) monthly c) periodically d)none of the above

Last Answer : periodically

Big label helps to calculate actual money to be spent on a) Maintenance bills c) Electricity bills b) Repairing d) None of above

Description : Big label helps to calculate actual money to be spent on a) Maintenance bills c) Electricity bills b) Repairing d) None of above

Last Answer : Electricity bills

The “in-principle” approval for setting up „small finance banks‟ granted by RBI will be valid for ______ A. 12 Months B. 24 Months C. 10 Months D. 18 Months E. None of the Above.

Description : The “in-principle” approval for setting up „small finance banks‟ granted by RBI will be valid for ______ A. 12 Months B. 24 Months C. 10 Months D. 18 Months E. None of the Above.

Last Answer : D. 18 Months Explanation: The ―in-principle‖ approval granted will be valid for 18 months to enable the applicants to comply with the requirements under the Guidelines and fulfil other conditions as may be stipulated by the RBI.

The “in-principle” license is valid for _____months within which the entities must fulfil the requirements. A. 12 Months B. 14 Months C. 18 Months D. 24 Months E. None of the Above

Description : The “in-principle” license is valid for _____months within which the entities must fulfil the requirements. A. 12 Months B. 14 Months C. 18 Months D. 24 Months E. None of the Above

Last Answer : C. 18 Months Explanation: The ―in-principle‖ license is valid for 18 months within which the entities must fulfil the requirements.

RNBCs cannot accept deposits for a period less than ______ months and more than ____ months A. 12, 84 B. 12, 60 C. 24, 60 D. 24, 84 E. None of the Above

Description : RNBCs cannot accept deposits for a period less than ______ months and more than ____ months A. 12, 84 B. 12, 60 C. 24, 60 D. 24, 84 E. None of the Above

Last Answer : A. 12, 84 Explanation: RNBCs cannot accept deposits for a period less than 12 months and more than 84 months.

Francis and George started a business with investments of Rs.7000 and Rs.10000. After x months, Francis left. After two more months David joined the business with an investment of Rs.10000. If the annual profit is shared among David, Francis and George in the ratio 10:7:24, find the respective time periods of David, Francis and George for which they stayed that year. a)5:5:12 b)1:1:3 c)1:1:4 d)1:1:2

Description : Francis and George started a business with investments of Rs.7000 and Rs.10000. After x months, Francis left. After two more months David joined the business with an investment of Rs.10000. If the annual profit is shared among David, ... which they stayed that year. a)5:5:12 b)1:1:3 c)1:1:4 d)1:1:2

Last Answer : a)5:5:12

If you start with 24 grams of a radioactive element with a half-life of one month, how many grams of the radioactive element will be left after 2 months? w) 1.5 grams x) 3 grams y) 6 grams z) 12 grams

Description : If you start with 24 grams of a radioactive element with a half-life of one month, how many grams of the radioactive element will be left after 2 months? w) 1.5 grams x) 3 grams y) 6 grams z) 12 grams

Last Answer : ANSWER: Y -- 6 GRAMS

No stamp duties are levied on LC backed bills up to _______ days. a 120 b 100 c 90

Description : No stamp duties are levied on LC backed bills up to _______ days. a 120 b 100 c 90

Last Answer : c 90

_______ allows users to access accounts and pay bills (1) Distance Learning (2) Online Banking (3) E-Commerce (4) Multimedia

Description : _______ allows users to access accounts and pay bills (1) Distance Learning (2) Online Banking (3) E-Commerce (4) Multimedia

Last Answer : E-Commerce 

n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion are a.N010 GO3 X7.0 Y2.0 I5.0 J2.0 b.N010 GO2 X7.0 Y2.0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Description : n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion ... 0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Last Answer : b.N010 GO2 X7.0 Y2.0 I5.0 J2.0

Speed of a boat in standing water is 9kmph and the speed of the stream is 1.5kmph. A man rows to a place at a distance of 10.5 km and comes back to the starting point. Find the total time taken by him. A.24 hours B.16 hours C.20 hours D.15 hours

Description : Speed of a boat in standing water is 9kmph and the speed of the stream is 1.5kmph. A man rows to a place at a distance of 10.5 km and comes back to the starting point. Find the total time taken by him. A.24 hours B.16 hours C.20 hours D.15 hours

Last Answer : Answer- A Basic Formula: i. speed = distance traveled / time taken ii. speed of the stream = ½ (a-b) km/hr iii. speed in still water = ½ (a+b) km/hr Explanation: Speed in still water= ½ (a+b) = 9km ... gives a = 10.5km/hr ; b=7.5 kmphr Total time taken by him = 105/10.5 + 105/7.5 = 24 hours

Starting from point A, Ajit walks 14 metres towards west, he then turns to his right and walks 14 metres and then turns to his left and walks 10 metres. He again turns to his left and walks 14 metres and reaches to the point E. The shortest distance between A and E is (A) 38 (B) 42 (C) 52 (D) 24

Description : Starting from point A, Ajit walks 14 metres towards west, he then turns to his right and walks 14 metres and then turns to his left and walks 10 metres. He again turns to his left and walks 14 metres and reaches to the point E. The shortest distance between A and E is (A) 38 (B) 42 (C) 52 (D) 24

Last Answer : Answer: D

The angular acceleration of a flywheel decreases uniformly from 8 rad/sec2 to 2 rad sec2 in 6 sec at which time its angular velocity is 42 rad/sec. The initial angular velocity was a.12 rad/sec b.24 rad/sec c.30 rad/sec d.3 rad/sec e.6 rad/sec

Description : The angular acceleration of a flywheel decreases uniformly from 8 rad/sec2 to 2 rad sec2 in 6 sec at which time its angular velocity is 42 rad/sec. The initial angular velocity was a.12 rad/sec b.24 rad/sec c.30 rad/sec d.3 rad/sec e.6 rad/sec

Last Answer : a. 12 rad/sec

What will be the duration of day and night if the earth shrinks to half the present radius? a.6 hours b.12 hours c.107 dynes d.3 hours e.24 hours

Description : What will be the duration of day and night if the earth shrinks to half the present radius? a.6 hours b.12 hours c.107 dynes d.3 hours e.24 hours

Last Answer : a. 6 hours

When a voltage of 115 VDC is applied to the illustrated circuit with a resistance of 12 ohms the current will be _______. EL-0018 A. 127 amps B. 9.58 amps C. 104.34 amps D. 1.24 amps

Description : When a voltage of 115 VDC is applied to the illustrated circuit with a resistance of 12 ohms the current will be _______. EL-0018 A. 127 amps B. 9.58 amps C. 104.34 amps D. 1.24 amps

Last Answer : Answer: B

The VPIof an NNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24

Description : The VPIof an NNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24

Last Answer : 12

The VPIof a UNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24

Description : The VPIof a UNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24

Last Answer : 8

As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Description : As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Last Answer : 18

As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Description : 96.As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Last Answer : 18

Having how much months of production and energy data, we can plot a moving annual total a) Three. b) Five c) Twelve. d) six

Description : Having how much months of production and energy data, we can plot a moving annual total a) Three. b) Five c) Twelve. d) six

Last Answer : twelve

A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Last Answer : a.9.24,9.24

Answer the following S. No Statement Chose the correct answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the blanks 3 Non Contact Infrared Thermometer cannot measure temperature of objects placed in hazardous places True/False 4 To measure the RPM of a Flywheel, ______ type of RPM meter is used and for a visible shaft-end _______ type of RPM meter is used. Fill in the blanks 5 In a switch yard, _____ instrument is used to identify the loose joints and terminations Fill in the blanks 6 Every Designated Consumer shall have its first energy audit conducted by ________ Energy Auditor within ______ months of

Description :  Answer the following S. No Statement Chose the correct  answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the ... of RPM  meter is used and for a visible shaft-end _______ type of  RPM meter is used.

Last Answer : Sr  No Statement Chose the correct  answer OR Fill-in-the-blanks Solution 1 Fyrite measures CO2, O2 and  SO2 True/False False 2 Ultrasonic Flow Meter uses the  principle of____& ____ ... ]  10 In a gasification system the  reduction zone is above the  combustion zone True/False False

Sundry Debtors – Rs.15,000 Bills Receivable (B/R) – Rs.12,500 Cash at Bank – Rs.17,500 Stock – Rs.15,000 Profit – Rs.20,000 Creditors – Rs.25,000 Bills Payable (B/P) – Rs.15,000 Sales – Rs.1,00,000 What is the Acid Test Ratio ? (A) 1•5 : 1 (B) 1•125 : 1 (C) 16 2/3% (D) 50%

Description : Sundry Debtors – Rs.15,000 Bills Receivable (B/R) – Rs.12,500 Cash at Bank – Rs.17,500 Stock – Rs.15,000 Profit – Rs.20,000 Creditors – Rs.25,000 Bills Payable (B/P) – Rs.15,000 Sales – Rs.1,00,000 What is the Acid Test Ratio ? (A) 1•5 : 1 (B) 1•125 : 1 (C) 16 2/3% (D) 50%

Last Answer : Answer: 1•125 : 1

78 India‘s total primary energy consumption is a) 24.3 BTU b) 19.01 BTU c) 120 BTU d) 30.1 BTU

Description : 78 India‘s total primary energy consumption is a) 24.3 BTU b) 19.01 BTU c) 120 BTU d) 30.1 BTU

Last Answer : 30.1 BTU

Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Description : Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Last Answer : EER = 3.42 COP

A critical feature of _______ is to understand what drives energy consumption. a) M&Y b) M&T c) T&M. d) C&V

Description : A critical feature of _______ is to understand what drives energy consumption. a) M&Y b) M&T c) T&M. d) C&V

Last Answer : m & t

ee star rating label just give _______ representation of the energy consumption levels byshowing star ratings. a. Physical c. Visual b. Both a and c d. None of the above

Description : Bee star rating label just give _______ representation of the energy consumption levels byshowing star ratings. a. Physical c. Visual b. Both a and c d. None of the above

Last Answer : Visual

The term “thermodynamics” comes from Greek words “therme” and “dynamis” which means _______.  A. Heat power  B. Heat transfer  C. Heat energy

Description : The term “thermodynamics” comes from Greek words “therme” and “dynamis” which means _______.  A. Heat power  B. Heat transfer  C. Heat energy  D. Heat motion

Last Answer : Heat power

6 A patient of chronic bronchial asthma was maintained on oral prednisolone 20 mg/day for 3 months. It was decided to switch him over to inhaled beclomethasone dipropionate 200 μg 4 times a day. What should be done to the oral prednisolone medication after starting inhaled beclomethasone: A. It should be stopped immediately B. Its dose should be tapered from the next day C. It should be given at the same dose for one week and then tapered D. Its dose should be doubled for one week and then tapered (p. 2

Description : 6 A patient of chronic bronchial asthma was maintained on oral prednisolone 20 mg/day for 3 months. It was decided to switch him over to inhaled beclomethasone dipropionate 200 μg 4 times a day. What should ... week and then tapered D. Its dose should be doubled for one week and then tapered (p. 2

Last Answer : C. It should be given at the same dose for one week and then tapered

A, B and C start at the same time in the same direction to run around a circular stadium. A completes a round in 252 seconds, B in 308 seconds and C in 198 seconds, all starting at the same point. After what time will they meet again at the starting point? A.15 minutes 15 seconds B.42 minutes 30 seconds C.42 minutes D.46 minutes 12 seconds E.None of these

Description : A, B and C start at the same time in the same direction to run around a circular stadium. A completes a round in 252 seconds, B in 308 seconds and C in 198 seconds, all starting at the same point ... A.15 minutes 15 seconds B.42 minutes 30 seconds C.42 minutes D.46 minutes 12 seconds E.None of these

Last Answer : Answer – D (46 minutes 12 seconds) Explanation – L.C.M. of 252, 308 and 198 = 2772.So, A, B and C will again meet at the starting point in 2772 see i.e., 46 min. 12 sec

While giving CPR which of the following is considered: a. It achieves 30% of cardiac output with 60 compressions per minute. b. It achieves normal blood oxygen levels with 12 reseparations per minute. c. You have to check compression point by thumbing before starting compression. d. Cardiac output has to be monitored regularly by checking radial pulse.

Description : While giving CPR which of the following is considered: a. It achieves 30% of cardiac output with 60 compressions per minute. b. It achieves normal blood oxygen levels with 12 reseparations ... starting compression. d. Cardiac output has to be monitored regularly by checking radial pulse.

Last Answer : c. You have to check compression point by thumbing before starting compression.

While giving CPR which of the following is correct: A. It achieves 30% of cardiac output with 60 compressions per minute B. It achieves normal blood oxygen levels with 12 reseparations per minute C. You have to check compression point by thumping before starting compression D. Cardiac output has to be monitored regularly by checking radial pulse.

Description : While giving CPR which of the following is correct: A. It achieves 30% of cardiac output with 60 compressions per minute B. It achieves normal blood oxygen levels with 12 ... thumping before starting compression D. Cardiac output has to be monitored regularly by checking radial pulse.

Last Answer : C. You have to check compression point by thumping before starting compression

A software company needs to develop a project that is estimated as 1000 function points and is planning to use JAVA as the programming language whose approximate lines of code per function point is accepted as 50. Considering a=1.4 as multiplicative factor, b=1.0 as exponention factor for the basic COCOMO effort equation and c=3.0 as multiplicative factor, d=0.33 as exponention factor for the basic COCOMO duration equation, approximately how long does the project take to complete? (1) 11.2 months (2) 12.2 months (3) 13.2 months (4) 10.2 months

Description : A software company needs to develop a project that is estimated as 1000 function points and is planning to use JAVA as the programming language whose approximate lines of code per function point is accepted as 50. Considering a=1. ... ? (1) 11.2 months (2) 12.2 months (3) 13.2 months (4) 10.2 months

Last Answer : Generally, any projects are measured in weeks. However, the complex project might take more time depending on the level of object re-use available.

Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part

Description : Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part

Last Answer : a.Limited material variety

Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Description : Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Last Answer : c.Laminated-Object Manufacturing

Which of the following RP technologies uses molten material as the starting material? a.Three-Dimensional Printing b.Fused-Deposition Modeling c.Stereolithography d.Selective Laser Sintering

Description : Which of the following RP technologies uses molten material as the starting material? a.Three-Dimensional Printing b.Fused-Deposition Modeling c.Stereolithography d.Selective Laser Sintering

Last Answer : c.Stereolithography

Which of the following RP technologies uses powders as the starting material? a.Droplet Deposition Manufacturing b.Fused-Deposition Modeling c.Selective Laser Sintering d.Stereolithography

Description : Which of the following RP technologies uses powders as the starting material? a.Droplet Deposition Manufacturing b.Fused-Deposition Modeling c.Selective Laser Sintering d.Stereolithography

Last Answer : c.Selective Laser Sintering

A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Description : A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Last Answer : b. 20 rpm

Why boiler is purged everytime before starting firing of fuel ?

Description : Why boiler is purged everytime before starting firing of fuel ?

Last Answer : Purging ensures that any unburnt fuel in furnace is removed, otherwise it may lead to explosion.

The battery has following three major functions to perform: a) To provide a source of current for engine starting, lighting and use of horn. b) To help control the voltage in the electrical system. c) To store the current produced by dynamo/alternator and to furnish the current d) all of the above. Ans. d

Description : The battery has following three major functions to perform: a) To provide a source of current for engine starting, lighting and use of horn. b) To help control the voltage in the electrical system. c ... the current produced by dynamo/alternator and to furnish the current d) all of the above. Ans. d

Last Answer : ans d

What are the multiples of 6 starting from 24?

Description : What are the multiples of 6 starting from 24?

Last Answer : What is the answer ?

The interrupt vector table of 80386 has been allocated ______ space starting from _______ to _______. a) 1Kbyte, 00000H, 003FFH b) 2Kbyte, 10000H, 004FFH c) 3Kbyte, 01000H, 007FFH d) 4Kbyte, 01000H, 009FFH

Description : The interrupt vector table of 80386 has been allocated ______ space starting from _______ to _______. a) 1Kbyte, 00000H, 003FFH b) 2Kbyte, 10000H, 004FFH c) 3Kbyte, 01000H, 007FFH d) 4Kbyte, 01000H, 009FFH

Last Answer : c) 3Kbyte, 01000H, 007FFH

Lowering Energy Bills With Heating Mattress Pads?

Description : Lowering Energy Bills With Heating Mattress Pads?

Last Answer : Keeping warm home during the winter can sometimes be a challenging issue. The cost of keeping each room comfortable can be a expensive, especially at night time. With heating mattress pads, you can ... mattress pads are similar to heated blankets, but since the heat goes underneath you and not o