A tractor of 30-35hp is suitable for hectare farm a. 20 c) 30 b. 25 d) 35

A tractor of 30-35hp is suitable for hectare farm a. 20 c) 30 b. 25 d) 35
by

1 Answer

Answer :

25 
by

Related questions

How many HP for tractor is suitable suitable for 20 hectares farm? A. 10-15 C. 20-25. B. 30-35 D. 40-45

Description : How many HP for tractor is suitable suitable for 20 hectares farm? A. 10-15 C. 20-25. B. 30-35 D. 40-45

Last Answer : 20-25

A tractor of 20-25hp is suitable for hectares farm. a. a) 15 c) 20 b. b) 25 d) 30

Description : A tractor of 20-25hp is suitable for hectares farm. a. a) 15 c) 20 b. b) 25 d) 30

Last Answer : 20

How much seed per hectare is needed for Berseem ? (a) 18 — 22 kg (b) 25 — 30 kg (c) 30 – 35 kg (d) 15 — 20 kg

Description : How much seed per hectare is needed for Berseem ? (a) 18 — 22 kg (b) 25 — 30 kg (c) 30 – 35 kg (d) 15 — 20 kg

Last Answer : (b) 25 — 30 kg

Normal consumption of fuep in ltrs/hr. by a 35hp tractor is (A) 2.5 (B)3.0 (C)3.5 (D)4

Description : Normal consumption of fuep in ltrs/hr. by a 35hp tractor is (A) 2.5 (B)3.0 (C)3.5 (D)4

Last Answer : (B)3.0

At present the farm power availability as per hectare is…. a) 1.84KW/ HA c) 1.85KW/HA b) 2.04KW/ HA d) 2.06KW/ HA

Description : At present the farm power availability as per hectare is…. a) 1.84KW/ HA c) 1.85KW/HA b) 2.04KW/ HA d) 2.06KW/ HA

Last Answer : 1.84KW/ HA

A tractor engine is operated at full load approximately a) 20-25% of the operating times b) 25-30% of the operating time c) 30-35% of the operating time d) 35-40% of operating time

Description : A tractor engine is operated at full load approximately a) 20-25% of the operating times b) 25-30% of the operating time c) 30-35% of the operating time d) 35-40% of operating time

Last Answer : b) 25-30% of the operating time

A tractor with fewer wheels Base, higher ground clearance may work successful in which soil A. B. 30-35 D. 40-45 Heavier C. Black cotton soil B. Wet soil D. Lighter soil

Description : A tractor with fewer wheels Base, higher ground clearance may work successful in which soil A. B. 30-35 D. 40-45 Heavier C. Black cotton soil B. Wet soil D. Lighter soil

Last Answer : Lighter soil

the time taken to plough one acre farm with 35 hp tractor is : A)60 minutes b)75 minutes C)90 minutes d)120 minutes

Description : the time taken to plough one acre farm with 35 hp tractor is : A)60 minutes b)75 minutes C)90 minutes d)120 minutes

Last Answer : b)75 minutes

How much paddy seed is needed for transplanting one hectare area by SRI technique(a) 30 – 35 kg (b) 1 •— 1•5 kg (c) 5-6kg (d) 10-12kg

Description : How much paddy seed is needed for transplanting one hectare area by SRI technique(a) 30 – 35 kg (b) 1 •— 1•5 kg (c) 5-6kg (d) 10-12kg

Last Answer : (c) 5-6kg

is an important machine used for farm machinisation. a) Tractor c) truck. b) Pump. d) Motor

Description : is an important machine used for farm machinisation. a) Tractor c) truck. b) Pump. d) Motor

Last Answer : Tractor 

Row crop tractor used for..... a) Crop c) Major farm operations b) Definite jobs d) None of the above

Description : Row crop tractor used for..... a) Crop c) Major farm operations b) Definite jobs d) None of the above

Last Answer : Crop 

General purpose tractor is used for a. Major farm operations c) Definite jobs b. Crop cultivation d) All of the above

Description : General purpose tractor is used for a. Major farm operations c) Definite jobs b. Crop cultivation d) All of the above

Last Answer : All of the above

Tractor is an important machine used for mechanization. A) Factory B) Farm C) Industrial D) Commercial

Description : Tractor is an important machine used for mechanization. A) Factory B) Farm C) Industrial D) Commercial

Last Answer : Farm

Farm tractor hoe is also called as a A. Hoe remover C. Hoe weight loader B. Hoe Loader D. Hoe Weight remover

Description : Farm tractor hoe is also called as a A. Hoe remover C. Hoe weight loader B. Hoe Loader D. Hoe Weight remover

Last Answer : Hoe Loader 

The most common variation of the classic farm tractor is the Backhoe loader A. HOE C. TOE B. BOE D. None of Above

Description : The most common variation of the classic farm tractor is the Backhoe loader A. HOE C. TOE B. BOE D. None of Above

Last Answer : HOE

The most common use of the term "tractor" is for the vehicles used on A. Farm C. Medicinal Purpose B. Production Industry D. None of above

Description : The most common use of the term "tractor" is for the vehicles used on A. Farm C. Medicinal Purpose B. Production Industry D. None of above

Last Answer : FARM

The power intensity of Indian farms increase from ...... to kW/hectare on basis of net-cropped area. a)0.2 to 1.30. c) 1.0 to 2.5 b) 0.5 to 1.60. d) 1.3 to 2.8

Description : The power intensity of Indian farms increase from ...... to kW/hectare on basis of net-cropped area. a)0.2 to 1.30. c) 1.0 to 2.5 b) 0.5 to 1.60. d) 1.3 to 2.8

Last Answer : 0.2 to 1.30.

A potato digger elevator can be mounted to a tractor with hp. a) 10-15 hp b) 20-25 hp c) 50-70 hp d) None of the above

Description : A potato digger elevator can be mounted to a tractor with hp. a) 10-15 hp b) 20-25 hp c) 50-70 hp d) None of the above

Last Answer : 20-25 hp

The penetration of powered machines in various farm activities is assede in the range of .. to .. a. 40,30. c) 20,40 b. 50,10. d) 40,45

Description : The penetration of powered machines in various farm activities is assede in the range of .. to .. a. 40,30. c) 20,40 b. 50,10. d) 40,45

Last Answer : 40,45

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Description : In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Last Answer : e. 25.5 m/s

If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Description : If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Last Answer : e. 15 rev/min2

Knife clips are placed with wearing plates spaced to apart a) 20 to 30 b) 45 to 60 c) 20 to 35 d) 30 to 40

Description : Knife clips are placed with wearing plates spaced to apart a) 20 to 30 b) 45 to 60 c) 20 to 35 d) 30 to 40

Last Answer : 20 to 30

It is quite true that the farmers with low earnings per capita because of low per hectare they get from holdings are..... a) Indian farmers b) American farmers c) Australian farmers d) all of the above

Description : It is quite true that the farmers with low earnings per capita because of low per hectare they get from holdings are..... a) Indian farmers b) American farmers c) Australian farmers d) all of the above

Last Answer : Indian farmers

Tractor engine oil should be changed and all grease points should be lubricated after every working hrs 1. 15 2. 30 3. 60 4. 120

Description : Tractor engine oil should be changed and all grease points should be lubricated after every working hrs 1. 15 2. 30 3. 60 4. 120

Last Answer : ans 4

When I was 20, 25, 30, 35 (your choice) you could always find me ... and you'd never catch me doing...

Description : When I was 20, 25, 30, 35 (your choice) you could always find me ... and you'd never catch me doing...

Last Answer : answer:When I was 24 to 40 you could always find me killing myself, working two jobs (averaging 60 hours/week ; and you’d never rarely catch me relaxing. Just this year, I’m down to one job, barely working 35 hours/week.

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

Daily output of urea in grams is (A) 10 to 20 (B) 15 to 25 (C) 20 to 30 (D) 35 to 45

Description : Daily output of urea in grams is (A) 10 to 20 (B) 15 to 25 (C) 20 to 30 (D) 35 to 45

Last Answer : Answer : C

The normal daily output of Urea through urine in grams: (A) 10 to 20 (B) 15 to 25 (C) 20 to 30 (D) 25 to 35

Description : The normal daily output of Urea through urine in grams: (A) 10 to 20 (B) 15 to 25 (C) 20 to 30 (D) 25 to 35

Last Answer : Answer : C

Minimum packing space provided between two sleepers, is between A. 20 to 25 cm B. 25 to 30 cm C. 30 to 35 cm D. 35 to 40 cm

Description : Minimum packing space provided between two sleepers, is between A. 20 to 25 cm B. 25 to 30 cm C. 30 to 35 cm D. 35 to 40 cm

Last Answer : C [30 to 35 cm]

Minimum depth of ballast prescribed of Broad Gauge trunk lines of Indian Railways, is A. 20 cm B. 25 cm C. 30 cm D. 35 cm

Description : Minimum depth of ballast prescribed of Broad Gauge trunk lines of Indian Railways, is A. 20 cm B. 25 cm C. 30 cm D. 35 cm

Last Answer : B [25 cm]

What is the minimum age for membership to Rajya Sabha? (1) 20 years (2) 25 years (3) 30 years (4) 35 years

Description : What is the minimum age for membership to Rajya Sabha? (1) 20 years (2) 25 years (3) 30 years (4) 35 years

Last Answer : (3) 30 years Explanation: According to Article 84(2) of Indian constitution, the minimum age for membership to Rajya Sabha is 30 years. The same article adds that the minimum age qualification for ... 25 years. The Rajya Sabha is the permanent house of parliament that is not subject to dissolution.

The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Description : The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Last Answer : [a] 40-45 degree

What is the size of Basin (sqm) in Check Basin Method of Irrigation? [a] 05- 20 sqm [b] 15- 30 sqm [c] 20- 35 sqm [d] 25- 40 sqm [e] None of the above

Description : What is the size of Basin (sqm) in Check Basin Method of Irrigation? [a] 05- 20 sqm [b] 15- 30 sqm [c] 20- 35 sqm [d] 25- 40 sqm [e] None of the above

Last Answer : [c] 20- 35 sqm

What is the optimum temperature requirement for Germination in rice? a. 25-30 o C b. 30-35 o C c. 20-35 o C d. 15-20 o C

Description : What is the optimum temperature requirement for Germination in rice? a. 25-30 o C b. 30-35 o C c. 20-35 o C d. 15-20 o C

Last Answer : c. 20-35 o C

What is the optimum temperature requirement for Germination in rice? a. 25-30 o C b. 30-35 o C c. 20-35 o C d. 15-20 o C

Description : What is the optimum temperature requirement for Germination in rice? a. 25-30 o C b. 30-35 o C c. 20-35 o C d. 15-20 o C

Last Answer : c. 20-35 o C

Integrated circuits contained 1) 10 to 20 components 2) 20 to 30 components 3) 25 to 25 components 4) 35 to 25 components

Description : Integrated circuits contained 1) 10 to 20 components 2) 20 to 30 components 3) 25 to 25 components 4) 35 to 25 components

Last Answer : 1) 10 to 20 components

The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Description : The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Last Answer : (B) 30 to 35

A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Description : A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Last Answer : Answer: Option C

The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Description : The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Last Answer : Answer: Option C

The maximum ratio of span to depth of a slab simply supported and spanning in one direction, is (A) 35 (B) 25 (C) 30 (D) 20

Description : The maximum ratio of span to depth of a slab simply supported and spanning in one direction, is (A) 35 (B) 25 (C) 30 (D) 20

Last Answer : Answer: Option C

The peak of a 4 hour flood hydrograph is 240 m3 /sec. If the rainfall excess is 80 mm and base flow which is constant is 40 m3 /sec, peak of 4hours unit hydrograph will be (A) 20 m3 /sec (B) 25 m3 /sec (C) 30 m3 /sec (D) 35 m3 /sec

Description : The peak of a 4 hour flood hydrograph is 240 m3 /sec. If the rainfall excess is 80 mm and base flow which is constant is 40 m3 /sec, peak of 4hours unit hydrograph will be (A) 20 m3 /sec (B) 25 m3 /sec (C) 30 m3 /sec (D) 35 m3 /sec

Last Answer : Answer: Option B

Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration. b) 10-15 mm Hg water pressure. A measure of 10–15 mm Hg water pressure would indicate that the cuff is underinflated. c) 30-35 mm Hg water pressure. A measure of 30–35 mm Hg water pressure would indicate that the cuff is overinflated. d) 0-5 mm Hg water pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Description : Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the ... pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Last Answer : a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration.

If 1500 g of water is required to have a cement paste 1875 g of normal consistency, the percentage of water is, (A) 20 % (B) 25 % (C) 30 % (D) 35 %

Description : If 1500 g of water is required to have a cement paste 1875 g of normal consistency, the percentage of water is, (A) 20 % (B) 25 % (C) 30 % (D) 35 %

Last Answer : (B) 25 %

The sum of ages of Mohan and his father is 35 years. When Mohan’s age will be equal to present age of his father, then sum of their ages will be 85 years. Find present age of the father. a) 20 years b) 25 years c) 30 years d) 32 years e) None of these

Description : The sum of ages of Mohan and his father is 35 years. When Mohan’s age will be equal to present age of his father, then sum of their ages will be 85 years. Find present age of the father. a) 20 years b) 25 years c) 30 years d) 32 years e) None of these

Last Answer : Sum of present ages = 35 years sum of their ages will be 85 years after (85-35) / 2 = 25 years from now. the father is 25 years older than his son. Present age of father = (35 + 25)/2 = 30 years. Answer: c)

The average age of the whole class is 12.05 years. The average age of all girls is 12.5 years and the average age of boys is 11.75 years. If the total number of boys is 45 then what is the total number of girls in the class? a) 20 b) 25 c) 30 d) 35 e) 40

Description : The average age of the whole class is 12.05 years. The average age of all girls is 12.5 years and the average age of boys is 11.75 years. If the total number of boys is 45 then what is the total number of girls in the class? a) 20 b) 25 c) 30 d) 35 e) 40

Last Answer : Let the number of girls be x. The number of boys is 45. :. Total age of boys and girls in the class = (x+45) × 12.05 or, (x+45) × 12.05 = 45 × 11.75 + x × 12.5 or, 12.05x + 542.25 = 528.75 + 12.5x or, 13.5 = 0.45x or, x = 13.5/0.45 = 30 Answer is: c)

3 9 15 ? 35 49 a) 25 b) 30 c) 24 d) 20 e) None of these

Description : 3 9 15 ? 35 49 a) 25 b) 30 c) 24 d) 20 e) None of these

Last Answer : Answer: a) 

Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Description : Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Last Answer : (b) 15, 25, 40 and 75

The maximum ratio of span to depth of a slab simply supported and spanning in one direction is (a) 35 (b) 25 (c) 30 (d) 20

Description : The maximum ratio of span to depth of a slab simply supported and spanning in one direction is (a) 35 (b) 25 (c) 30 (d) 20

Last Answer : (c) 30

Integrated circuits contained 1 10 to 20 components 2 20 to 30 components 3 25 to 25 components 4 35 to 25 components

Description : Integrated circuits contained 1 10 to 20 components 2 20 to 30 components 3 25 to 25 components 4 35 to 25 components

Last Answer : 1 10 to 20 components