Description : High carbon steel having carbon content about (A) 0.25 % (B) 0.25 – 0.50 % (C) 0.50 – 1.5 % (D) 2.5 - 4.5 %
Last Answer : (C) 0.50 – 1.5 %
Description : Medium Carbon steel was carbon content about (A) 0.25 % (B) 0.25 – 0.50 % (C) 0.50 – 1.5 % (D) 2.5 – 4.5 %
Last Answer : (B) 0.25 – 0.50 %
Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel
Last Answer : a. Soft centre steel
Description : Total mechanical losses ( frictional losses , pumping loss in intake and exhaust and power accessories) will amount to a.10-20 % ihp b.2-10 % ihp c.20-30 % ihp d.30 -50 % ihp
Last Answer : a.10-20 % ihp
Description : Brass is an alloy of copper and zinc having the relative percentage (A) 60-70% Cu and 30-40% Zn (B) 50-60% Cu and 40-50% Zn (C) 40-50 % Cu and 60-50% Zn (D) 30-40 % Cu and 60-70% Zn
Last Answer : A) 60-70% Cu and 30-40% Zn
Description : - Material used for hand slide is (a) chilled cast iron. (b) cast iron (c) mild steel. (d) gun metal
Last Answer : (c) mild steel
Description : Share for use in sandy soils are made of A)chilled cast iron. B)cast iron C)mild steel. D)gun metal
Last Answer : Share for use in sandy soils are made of A)chilled cast iron. B)cast iron C)mild steel. D)gun metal
Description : Mild steel is an alloy with carbon content a)0.25%. b)5% c)10%. d)25%
Last Answer : a)0.25%.
Description : Cast iron contains carbon approximately (A) 1.5% to 5.5% (B) 0.05% to 1.75% (C) 0.250 % (D) None to these
Last Answer : Answer: Option A
Description : Wrought iron contains carbon upto (A) 0.25 % (B) 1.0 % (C) 1.5 % (D) 2 %
Description : The moisture content of sludge is reduced from 90% to 80% in a sludge digestion tank. The percentage decrease in the volume of sludge, is A. 25 % B. 50 % C. 10 % D. 5 %
Last Answer : ANS: B
Description : The ideal moisture content for the soil primary tillage operation a) Upper plastic limit of the soil b) Lower plastic limit c) Wilting Point d) All of the above
Last Answer : a) Upper plastic limit of the soil
Description : Thresher blows broken grains with chaff due to a) Higher cylinder speed. b) More feed Rate c) More cylinder concave clearance d) Moisture content of the crop is more
Last Answer : a) Higher cylinder speed.
Description : Most important factor affecting threshing efficiency a)peripheral speed of the drum b)cylinder concave clearance c)moisture content of crop d)feed rate
Last Answer : a)peripheral speed of the drum
Description : Flat planting predominates where a) Nature moisture content is favourable b) Rainfall is high to provide surface drainage c) Semi arid areas to conserve moisture d) None of the above
Last Answer : a) Nature moisture content is favourable
Description : he temperature at which solid content of fuel freeze out is called.... (a) Fire point (b) Flash point (c) Pour point (d) Cloud point
Last Answer : (a) Fire point
Description : Clay and silt content in a good brick earth must be at least (A) 50 % (B) 40 % (C) 30 % (D) 25 %
Description : Maximum carbon content in cast iron is __________ percent. (A) 3.8 (B) 5.2 (C) 4.8 (D) 4.3
Last Answer : (D) 4.3
Description : Length of cut for silage ranges from E. 2-4 cm F. 5-10 cm G. 15-20 cm H. 20-25 cm
Last Answer : E. 2-4 cm
Description : Improved uniformity is obtained if seed tube is inclined rear ward at _________ with vertical. a)5-15° b)15-30° c)30-40° d)40-50
Last Answer : b)15-30°
Description : Cleaning of sugarcane is obtained at peripheral speed A. 12-15m/sec B. 18-20m/sec C. 20-25m/sec D. 25-30m/sec
Last Answer : B. 18-20m/sec
Description : Stroke bore ratio for tractor engine is (a) 1.25 (b) 1.45 (c) 1.75 (d) 2.00
Last Answer : (a) 1.25
Description : Iron absorption from a mixed diet is about (A) 1–5 % (B) 5–10 % (C) 20–25 % (D) 25–50 %
Last Answer : Answer : B
Description : .The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel
Last Answer : D. Soft Centre steel
Description : Hook link chains are a)suitable for external drive exposed atmosphere b)made of meabble iron c)used where power requirement is low and speed is low d)All of the above
Last Answer : d)All of the above
Description : The landside of a mould board plough is made of: a) Malleable iron b) Forged steel c) C45 steel d) Soft centre steel
Last Answer : d) Soft centre steel
Description : Turbo chargers or super chargers increases engine power by A. 10-20% C. 50-60% B. 20-30% D. 90-100%
Last Answer : A. 10-20%
Description : Weight per unit of drawbar power is generally ranges between a)50-120kg/kw b)120-150kg/kw c)150-250kg/kw d)250-300kg/kw
Last Answer : a)50-120kg/kw
Description : In electrostatic spraying the total volume of liquid to be sprayed over one Hectare is a.100 litres
Last Answer : a.
Description : Spary angle for fan nozzle and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150
Last Answer : c) 60-95
Description : Spray Angle for fan nozzles and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150
Description : Juice extraction capacity of vertical three roller type bullock down sugercane crusher E. 50-70% F. 70-90% G. 90-100% H. 30-50%
Last Answer : E. 50-70%
Description : Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above
Last Answer : G. 600-1000 rpm
Description : Speed of band operated machines chaff cutter having two knives F. 35 rpm G. 50 rpm H. 600 rpm I. 1000 rpm
Last Answer : F. 35 rpm
Description : pecific gravity of fully charged storage battery is ∙ 1.15 ∙ 1.50 ∙ 1.28 ∙ 2.15
Last Answer : ∙ 1.28
Description : Injection pressure of fuel nozzle in diesel engine is a) 30-45 kg/cm2 b) 50-100 kg/cm2 c) 120-200 kg/cm2 d) 200 kg/cm2
Last Answer : c) 120-200 kg/cm2
Description : Cast iron contains __________ percent carbon. (A) 2.5 (B) 3.75 (C) 4.75 (D) 5.25
Last Answer : Option A
Description : Degree of saturation of a natural soil deposit having water content 15%, specific gravity 2.50 and void ratio 0.5, is (A) 50 % (B) 60 % (C) 75 % (D) 80 %
Last Answer : (C) 75 %
Description : If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %
Last Answer : Answer: Option D
Description : What is the natural frequency of driver sheet suspension a) 0.5-1.5 Hz b) 1.5-4.0 Hz c) 4.0-6.0 Hz d) 4.0-10 Hz
Last Answer : a) 0.5-1.5 Hz
Description : Normal consumption of fuep in ltrs/hr. by a 35hp tractor is (A) 2.5 (B)3.0 (C)3.5 (D)4
Last Answer : (B)3.0
Description : What is natural frequency of driver sheet suspensions a)0.5-1.5 Hz b)1.5-4.0 Hz c)4.0-6.0 Hz d)4.0-10 Hz
Last Answer : a)0.5-1.5 Hz
Description : enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m
Last Answer : (a) 1.5-3.0m
Description : Steel contains carbon approximately (A) 1.50% to 5.6% (B) 0.05% to 1.75% (C) 0.25 % (D) None to these
Last Answer : Answer: Option B
Description : For the gaseous reaction 2A → B, where the feed consists of 50 mole % A and 50 mole % inerts, the expansion factor is (A) 1 (B) -0.5 (C) -0.25 (D) 0
Last Answer : (C) -0.25
Description : 2m combine is operating at 4 kmph with an overall efficiency of 75%. The area covered by in(ha\h) will be: a. 0.4 b. 0.6 c. 0.8 d. 1.0
Last Answer : b. 0.6
Description : How many units of electricity per hp per hour is used by electric motor: A)0.44 b)0.66 C)0.88 d)1.10
Last Answer : C)0.88 d
Description : A dry land weeder covers an area (in hactare) per day (8 hour): A)0.1 b)0.2 C)0.3 c)0.4
Last Answer : b)0.2
Description : Soil air contains CO2 (%) (A)0.03 (B) 2.50 (C) 0.25 (D) 3.0
Last Answer : (C) 0.25