Based on flow quality, the sequence of pipes is (A) A.C. pipes, G.I. pipes, C.I. pipes, PVC pipes (B) C.I. pipes, G.I. pipes, A.C. pipes, PVC pipes (C) C.I. pipes, G.I. pipes, PVC pipes, A.C. pipes (D) None of these

Based on flow quality, the sequence of pipes is
(A) A.C. pipes, G.I. pipes, C.I. pipes, PVC pipes
(B) C.I. pipes, G.I. pipes, A.C. pipes, PVC pipes
(C) C.I. pipes, G.I. pipes, PVC pipes, A.C. pipes
(D) None of these
by

1 Answer

Answer :

Answer: Option B
by

Related questions

What is good to remove stains from purple glue for PVC pipes??? it is on my refrigerator?

Description : What is good to remove stains from purple glue for PVC pipes??? it is on my refrigerator?

Last Answer : It’s actually pvc primer. Oatey clear cleaner on a quick search. That purple mess is notoriously hard to remove.

Is it dangerous to handle PVC pipes on an 18 hour basis?

Description : Is it dangerous to handle PVC pipes on an 18 hour basis?

Last Answer : Depends on what you’re doing with the pipes

What do you need to join pvc pipes together?

Description : What do you need to join pvc pipes together?

Last Answer : You use PVC glue or cement.It's really quite easy.First you clean the pvc with solvent,then you put on the pvc glue.You want a little more than will cover the joint,but not enought to drip.You hold it together for about a minute.Wait an hour before you run water through it.

Are PVC pipes better than metal pipes?

Description : Are PVC pipes better than metal pipes?

Last Answer : PVC pipes will not rust and are less costly to replace.

Conduit pipes are normally used to protect _____ cables. (a) unsheathed cables (b) armoured (c) PVC sheathed cables (d) all of the above

Description : Conduit pipes are normally used to protect _____ cables. (a) unsheathed cables (b) armoured (c) PVC sheathed cables (d) all of the above

Last Answer : (a) unsheathed cables

The type of pipe commonly used in water supply distribution schemes, is (A) R.C.C. pipes (B) Hume pipes (C) Cast iron pipes (D) G.I. pipes

Description : The type of pipe commonly used in water supply distribution schemes, is  (A) R.C.C. pipes  (B) Hume pipes  (C) Cast iron pipes  (D) G.I. pipes

Last Answer : (C) Cast iron pipes

Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Description : Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Last Answer : (D) All the above

Sluice valves in main water supplies (A) Are used to regulate the flow of water in pipes (B) Are spaced about 5 km apart (C) Are usually placed at the summits (D) All the above

Description : Sluice valves in main water supplies  (A) Are used to regulate the flow of water in pipes  (B) Are spaced about 5 km apart  (C) Are usually placed at the summits  (D) All the above 

Last Answer : (D) All the above 

Corrosion of well pipes may not be reduced by (A) Reducing the draw down and the pumping rate (B) Reducing the flow velocity (C) Using thicker pipes (D) Using screens having larger area of openings

Description : Corrosion of well pipes may not be reduced by  (A) Reducing the draw down and the pumping rate  (B) Reducing the flow velocity  (C) Using thicker pipes  (D) Using screens having larger area of openings 

Last Answer : (D) Using screens having larger area of openings 

In case of flow through parallel pipes, (A) The head loss for all the pipes is same (B) The total discharge is equal to the sum of discharges in the various pipes (C) The total head loss is the sum of head losses in the various pipes (D) Both (A) and (B)

Description : In case of flow through parallel pipes, (A) The head loss for all the pipes is same (B) The total discharge is equal to the sum of discharges in the various pipes (C) The total head loss is the sum of head losses in the various pipes (D) Both (A) and (B)

Last Answer : Answer: Option D

For pipes, turbulent flow occurs when Reynolds number is(A) Less than 2000 (B) Between 2000 and 4000 (C) More than 4000 (D) Less than 4000

Description : For pipes, turbulent flow occurs when Reynolds number is (A) Less than 2000 (B) Between 2000 and 4000 (C) More than 4000 (D) Less than 4000

Last Answer : Answer: Option C

For pipes, laminar flow occurs when Reynolds number is (A) Less than 2000 (B) Between 2000 and 4000 (C) More than 4000 (D) Less than 4000

Description : For pipes, laminar flow occurs when Reynolds number is (A) Less than 2000 (B) Between 2000 and 4000 (C) More than 4000 (D) Less than 4000

Last Answer : Answer: Option A

Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option C

A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of head and discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Description : A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of ... discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Last Answer : Answer: Option C

Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option B

The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Description : The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Last Answer : Answer: Option D

The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid(C) The flow of fluid through the pipe is suddenly brought to rest by closing of the valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Description : The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid (C) The flow of fluid through the pipe is suddenly brought to ... valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Last Answer : Answer: Option C

Mach number is significant in (A) Supersonics, as with projectiles and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity force, and wave making effects, as with ship's hulls (D) All of the above

Description : Mach number is significant in (A) Supersonics, as with projectiles and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through ... gravity force, and wave making effects, as with ship's hulls (D) All of the above

Last Answer : Answer: Option A

Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC

Description : Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC

Last Answer : (A) Polystyrene

Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Description : Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Last Answer : (B) For fibre making

State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material.

Description : State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material. 

Last Answer :  (i) Application of PVC paper : 1. It is used in slot lining or motor winding insulation purpose 2. For Insulation of Transformer winding (ii) Application of Porcelain : 1. Mainly used for manufacturing ... on withstand temperature : * H' & C' Class of insulation i e. 180° and above 180°C 

PVC stands for (A) Plastic very compact (B) Polythene vinyl chloride (C) Polythene vinyl carbon (D) Polythene vanadium carbide

Description : PVC stands for (A) Plastic very compact (B) Polythene vinyl chloride (C) Polythene vinyl carbon (D) Polythene vanadium carbide

Last Answer : Answer: Option B

The PVC doors and windows are preferred as they are (A) Rust proof (B) Rot proof (C) Water proof (D) All of these

Description : The PVC doors and windows are preferred as they are (A) Rust proof (B) Rot proof (C) Water proof (D) All of these

Last Answer : Answer: Option D

Lead caulked joints are used for laying A. Stone ware pipes B. Earthenware pipes C. C.I. pipes D. G.I. pipes

Description : Lead caulked joints are used for laying A. Stone ware pipes B. Earthenware pipes C. C.I. pipes D. G.I. pipes

Last Answer : ANS: B

In cement pressure grouting G.I pipes of diameter …… and ……length, should be fixed in drilled holes a) 12 to 20 mm, 200 mm* b) 12 to 20 mm, 300 mm c) 12 to 25 mm, 500 mm d) 20 to 25 mm, 300 mm

Description : In cement pressure grouting G.I pipes of diameter …… and ……length, should be fixed in drilled holes a) 12 to 20 mm, 200 mm* b) 12 to 20 mm, 300 mm c) 12 to 25 mm, 500 mm d) 20 to 25 mm, 300 mm

Last Answer : a) 12 to 20 mm, 200 mm*

Sewer pipes need be checked for A. Minimum flow B. Maximum flow C. Both A. and B. D. None of these

Description : Sewer pipes need be checked for A. Minimum flow B. Maximum flow C. Both A. and B. D. None of these

Last Answer : ANS: C

You are asked to design sewer pipes of diameters 0.4 m to 0.9 m at maximum flow, you will assume the sewer flow running at A. Full depth B. Half full C. Two third full D. Three fourth full

Description : You are asked to design sewer pipes of diameters 0.4 m to 0.9 m at maximum flow, you will assume the sewer flow running at A. Full depth B. Half full C. Two third full D. Three fourth full

Last Answer : ANS: B

Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self cleansing velocity C. The sewers may be carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills

Description : Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self ... carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills

Last Answer : ANS: A

Pick out the wrong statement. (A) The Reynolds analogy for mass transfer is given by Lewis relation and is applicable, when Schmidt number is one (B) Sherwood number for flow in pipes can be expressed as the ratio of the concentration gradient at wall to the overall concentration difference (C) According to film theory for equimolar counter diffusion, the mass transfer coefficient is given by DAB(B)P - 3, Q - 2 (D) The z-component of the total mass flux of a component A in binary mixture of A and B is given by - Dab'.dCA/dz

Description : Pick out the wrong statement. (A) The Reynolds analogy for mass transfer is given by Lewis relation and is applicable, when Schmidt number is one (B) Sherwood number for flow in pipes can be expressed ... flux of a component A in binary mixture of A and B is given by - Dab'.dCA/dz

Last Answer : (C) According to film theory for equimolar counter diffusion, the mass transfer coefficient is given by DAB(B)P - 3, Q - 2

The most economical flow control valve for use with large diameter pipes is a (A) Butterfly valve (B) Globe valve (C) Needle valve (D) None of these

Description : The most economical flow control valve for use with large diameter pipes is a (A) Butterfly valve (B) Globe valve (C) Needle valve (D) None of these

Last Answer : (A) Butterfly valve

Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian fluid velocity in a circular pipe flow is maximum at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Description : Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian ... at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Last Answer : (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5

Dean number is concerned with the (A) Fluid-particle interaction (B) Fluid flow through helical pipes (C) Power consumption in agitated vessels (D) Psychrometry

Description : Dean number is concerned with the (A) Fluid-particle interaction (B) Fluid flow through helical pipes (C) Power consumption in agitated vessels (D) Psychrometry

Last Answer : (B) Fluid flow through helical pipes

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

Boundary layer exists in flow (A) Of real fluids (B) Over flat surfaces only (C) In pipes only (D) Of ideal fluids only

Description : Boundary layer exists in flow (A) Of real fluids (B) Over flat surfaces only (C) In pipes only (D) Of ideal fluids only

Last Answer : (A) Of real fluids

In case of end to end connection of two or more pipes in series, the __________ each pipe.(A) Same rate of flow passes through (B) Head loss is same through (C) Rate of flow in each pipe is proportional to the length of (D) Total flow rate is the sum of flow rate in

Description : In case of end to end connection of two or more pipes in series, the __________ each pipe. (A) Same rate of flow passes through (B) Head loss is same through (C) Rate of flow in each pipe is proportional to the length of (D) Total flow rate is the sum of flow rate in

Last Answer : (A) Same rate of flow passes through

Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the first fluid, the pressure drop will (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Description : Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the ... (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Last Answer : (B) Decrease

Venturimeter is used to measure the flow rate of fluids in pipes, when the pipe is in __________ position. (A) Horizontal (B) Vertical (C) Inclined (D) Any

Description : Venturimeter is used to measure the flow rate of fluids in pipes, when the pipe is in __________ position. (A) Horizontal (B) Vertical (C) Inclined (D) Any

Last Answer : (D) Any

What are used in the direct flow system to transfer the pond batch uniting at intake? a. Separators b. Filters c. Baffle walls d. Porous pipes

Description : What are used in the direct flow system to transfer the pond batch uniting at intake? a. Separators b. Filters c. Baffle walls d. Porous pipes

Last Answer : c. Baffle walls

If Carrier develops a new air conditioning compressor that lasts twice as long as existing compressors but only uses half the electricity, it will probably establish its pricing based on: A)cash flow. B)product quality. C)survival. D)return on investment. E)market share.

Description : If Carrier develops a new air conditioning compressor that lasts twice as long as existing compressors but only uses half the electricity, it will probably establish its pricing based on: A)cash flow. B)product quality. C)survival. D)return on investment. E)market share.

Last Answer : B)product quality.

Pick up the wrong nominal internal diameter of cast iron (spun) pipes in mm from the following: (A) 300 (B) 400 (C) 550 (D) 650

Description : Pick up the wrong nominal internal diameter of cast iron (spun) pipes in mm from the following: (A) 300 (B) 400 (C) 550 (D) 650

Last Answer : (C) 550

Cast iron pipes are generally preferred to, because (A) Of moderate cost (B) Of ease to join (C) Of longer life (D) All the above

Description : Cast iron pipes are generally preferred to, because (A) Of moderate cost (B) Of ease to join (C) Of longer life (D) All the above

Last Answer : (D) All the above

Sluice valves are fitted in a distribution system (A) Along straight length of pipes at suitable intervals (B) At the junctions of the pipes (C) At the branching off points of sub-mains (D) All the above

Description : Sluice valves are fitted in a distribution system (A) Along straight length of pipes at suitable intervals (B) At the junctions of the pipes (C) At the branching off points of sub-mains (D) All the above

Last Answer : (D) All the above

Service connections to consumers houses, are generally provided with (A) Copper pipes (B) Hume pipes (C) Galvanised iron pipes (D) P.V.C. pipe

Description : Service connections to consumers houses, are generally provided with (A) Copper pipes (B) Hume pipes (C) Galvanised iron pipes (D) P.V.C. pipe

Last Answer : (C) Galvanised iron pipes

The type of joint generally used in cast iron pipes, is (A) Socket and spigot joint (B) Flanged joint (C) Dresser coupling joint (D) All the above

Description : The type of joint generally used in cast iron pipes, is (A) Socket and spigot joint (B) Flanged joint (C) Dresser coupling joint (D) All the above

Last Answer : (D) All the above

Asbestos pipes are joined by means of (A) Flanged joint (B) Flexible joint (C) Dresser coupling joint (D) Simplex joint

Description : Asbestos pipes are joined by means of (A) Flanged joint (B) Flexible joint (C) Dresser coupling joint (D) Simplex joint

Last Answer : (D) Simplex joint

For a city developed haphazardly, the layout of distribution pipes preferred to, is (A) Ring system (B) Radial system (C) Grid iron system (D) Dead end system

Description : For a city developed haphazardly, the layout of distribution pipes preferred to, is (A) Ring system (B) Radial system (C) Grid iron system (D) Dead end system

Last Answer : (D) Dead end system

The diameter of pipes in bath rooms and lavatories in domestic water supply, is (A) 6 mm (B) 12 mm (C) 18 mm (D) 24 mm

Description : The diameter of pipes in bath rooms and lavatories in domestic water supply, is (A) 6 mm (B) 12 mm (C) 18 mm (D) 24 mm

Last Answer : (B) 12 mm

In distribution pipes, drain valves are provided at (A) Lower point (B) Higher point (C) Junction points (D) Anywhere

Description : In distribution pipes, drain valves are provided at (A) Lower point (B) Higher point (C) Junction points (D) Anywhere

Last Answer : (A) Lower point

Cast iron pipes (A) Are widely used in city water supplies (B) Resist corrosion satisfactorily (C) May last for 100 years (D) All the above

Description : Cast iron pipes (A) Are widely used in city water supplies (B) Resist corrosion satisfactorily (C) May last for 100 years (D) All the above

Last Answer : (D) All the above

Pipes are laid parallel (A) To increase the capacity of the water supply (B) To provide a means of repairing without closing water supply (C) To meet the requirement of excessive supply (D) All the above

Description : Pipes are laid parallel (A) To increase the capacity of the water supply (B) To provide a means of repairing without closing water supply (C) To meet the requirement of excessive supply (D) All the above

Last Answer : (D) All the above