For pipes, turbulent flow occurs when Reynolds number is(A) Less than 2000 (B) Between 2000 and 4000 (C) More than 4000 (D) Less than 4000

For pipes, turbulent flow occurs when Reynolds number is
(A) Less than 2000
(B) Between 2000 and 4000
(C) More than 4000
(D) Less than 4000
by

1 Answer

Answer :

Answer: Option C
by

Related questions

For pipes, laminar flow occurs when Reynolds number is (A) Less than 2000 (B) Between 2000 and 4000 (C) More than 4000 (D) Less than 4000

Description : For pipes, laminar flow occurs when Reynolds number is (A) Less than 2000 (B) Between 2000 and 4000 (C) More than 4000 (D) Less than 4000

Last Answer : Answer: Option A

For turbulent mass transfer in pipes, the Sherwood number depends on the Reynolds number as (A) Re 0.33 (B) Re 0.53 (C) Re 0.83 (D) Re

Description : For turbulent mass transfer in pipes, the Sherwood number depends on the Reynolds number as (A) Re 0.33 (B) Re 0.53 (C) Re 0.83 (D) Re

Last Answer : (C) Re 0.83

The flow in a pipe is turbulent when Reynold number is (A) Less than 2000 (B) Between 2000 and 2800 (C) More than 2800 (D) None of these

Description : The flow in a pipe is turbulent when Reynold number is (A) Less than 2000 (B) Between 2000 and 2800 (C) More than 2800 (D) None of these

Last Answer : Answer: Option C

The flow in a pipe is neither laminar nor turbulent when Reynold number is (A) Less than 2000 (B) Between 2000 and 2800 (C) More than 2800 (D) None of these

Description : The flow in a pipe is neither laminar nor turbulent when Reynold number is (A) Less than 2000 (B) Between 2000 and 2800 (C) More than 2800 (D) None of these

Last Answer : Answer: Option B

Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option B

In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of the laminar film (C) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Description : In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of ... ) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Last Answer : (B) When the roughness projections are much smaller than the thickness of the laminar film

. In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with increasing Reynolds number (C) Point of maximum instability exists at a distance of 2r/3 from the pipe wall (r = pipe radius) (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Description : . In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with ... , shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Last Answer : (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Laminar flow of a Newtonian fluid ceases to exist, when the Reynolds number exceeds (A) 4000 (B) 2100 (C) 1500 (D) 3000

Description : Laminar flow of a Newtonian fluid ceases to exist, when the Reynolds number exceeds (A) 4000 (B) 2100 (C) 1500 (D) 3000

Last Answer : (B) 2100

The Reynolds number for an ideal fluid flow is (A) 4 (B) 2100-4000 (C) 4000 (D) ∞

Description : The Reynolds number for an ideal fluid flow is (A) 4 (B) 2100-4000 (C) 4000 (D) ∞

Last Answer : (D) ∞

The Sieder-Tate correlation for heat transfer in turbulent flow in pipe gives Nu α Re 0.8 , where, Nu is the Nusselt number and Re is the Reynolds number for the flow. Assuming that this relation is valid, the heat transfer co-efficient varies with the pipe diameter (D) as (A) D-1.8 (B) D-0.2 (C) D0.2 (D) D1.8

Description : The Sieder-Tate correlation for heat transfer in turbulent flow in pipe gives Nu α Re 0.8 , where, Nu is the Nusselt number and Re is the Reynolds number for the flow. Assuming that this relation is valid, the heat transfer co-efficient ... pipe diameter (D) as (A) D-1.8 (B) D-0.2 (C) D0.2 (D) D1.8

Last Answer : (B) D-0.2

Critical value of the __________ number governs the transition from laminar to turbulent flow in free convection heat transfer. (A) Grashoff (B) Reynolds (C) Both 'a' & 'b' (D) Prandtl & Grashoff

Description : Critical value of the __________ number governs the transition from laminar to turbulent flow in free convection heat transfer. (A) Grashoff (B) Reynolds (C) Both 'a' & 'b' (D) Prandtl & Grashoff

Last Answer : (D) Prandtl & Grashoff

The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Description : The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Last Answer : (A) Depends only on Reynolds number

When the pipe Reynold's number is 6000, the flow is generally (A) Viscous(B) Laminar(C) Turbulent(D) Transition

Description : When the pipe Reynold's number is 6000, the flow is generally (A) Viscous (B) Laminar (C) Turbulent (D) Transition

Last Answer : (C) Turbulent

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

For the Stoke's law to be valid in the case of a falling sphere in a fluid, the (A) Reynolds number (based on sphere diameter) should be < 1 (B) Flow around the sphere should be in turbulent region (C) Sphere must be metallic (D) Fluid density should be constant

Description : For the Stoke's law to be valid in the case of a falling sphere in a fluid, the (A) Reynolds number (based on sphere diameter) should be < 1 (B) Flow around the sphere should be in turbulent region (C) Sphere must be metallic (D) Fluid density should be constant

Last Answer : (C) Sphere must be metallic

Nusselt number is related to the Reynolds number (Re) in turbulent & laminar flow respectively as (A) Re0.5, Re0.8 (B) Re0.8, Re-0.5 (C) Re0.8, Re0.5 (D) Re-0.8, Re0.5

Description : Nusselt number is related to the Reynolds number (Re) in turbulent & laminar flow respectively as (A) Re0.5, Re0.8 (B) Re0.8, Re-0.5 (C) Re0.8, Re0.5 (D) Re-0.8, Re0.5

Last Answer : (C) Re0.8, Re0.5

Define. i) Streamline flow ii) Turbulent flow Give significance of Reynold’s number.

Description : Define. i) Streamline flow ii) Turbulent flow Give significance of Reynold’s number.

Last Answer : i) Streamline flow The flow of liquid in which every particle of liquid moves in the same direction of flow of liquid is called streamline flow. ii) Turbulent flow The flow of liquid in which every ... to 3000 liquid flow is unstable. (3)When R is greater than 3000 liquid flow is turbulent. 

Which of the fluid forces are not considered in the Reynold's equation of flow? (A) Viscous forces (B) Turbulent forces (C) Pressure forces (D) Compressibility forces

Description : Which of the fluid forces are not considered in the Reynold's equation of flow? (A) Viscous forces (B) Turbulent forces (C) Pressure forces (D) Compressibility forces

Last Answer : (D) Compressibility forces

Pick out the wrong statement. (A) The Reynolds analogy for mass transfer is given by Lewis relation and is applicable, when Schmidt number is one (B) Sherwood number for flow in pipes can be expressed as the ratio of the concentration gradient at wall to the overall concentration difference (C) According to film theory for equimolar counter diffusion, the mass transfer coefficient is given by DAB(B)P - 3, Q - 2 (D) The z-component of the total mass flux of a component A in binary mixture of A and B is given by - Dab'.dCA/dz

Description : Pick out the wrong statement. (A) The Reynolds analogy for mass transfer is given by Lewis relation and is applicable, when Schmidt number is one (B) Sherwood number for flow in pipes can be expressed ... flux of a component A in binary mixture of A and B is given by - Dab'.dCA/dz

Last Answer : (C) According to film theory for equimolar counter diffusion, the mass transfer coefficient is given by DAB(B)P - 3, Q - 2

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the first fluid, the pressure drop will (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Description : Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the ... (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Last Answer : (B) Decrease

Thrombolytic therapy has become a useful adjunct in the management of peripheral arterial occlusion. In this setting, direct intraarterial administration rather than intravenous has been advocated to decrease the risk of systemic bleeding. Which of the following true statement(s) concerning the use of thrombolytic agents for arterial occlusion is/are true? a. A standard technique involves infusing high-dose urokinase, 4000 units per minute for 1–2 hours, directly into the clot by a catheter embedded in the thrombus b. If progress is made, further fibrinolytic therapy is given at 1000 to 2000 units per minute until clot lysis has occurred c. The usual infusion time by the above-stated technique is usually in excess of 24 hours d. Successful clot lysis occurs more frequently in arterial graf

Description : Thrombolytic therapy has become a useful adjunct in the management of peripheral arterial occlusion. In this setting, direct intraarterial administration rather than intravenous has been advocated ... may be indicated for situations where complete clot evacuation cannot be accomplished surgically

Last Answer : Answer: a, b, e The most popular method for intraarterial thrombolytic therapy for arterial occlusion involves passing a guidewire through the thrombus with arteriographic guidance and ... acute arterial occlusion) or when distal vasculative is occluded and precludes appropriate inflow patency

Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian fluid velocity in a circular pipe flow is maximum at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Description : Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian ... at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Last Answer : (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5

Reynolds number for flow of water at room temperature through 2 cm dia pipe at an average velocity of 5 cm/sec is around (A) 2000 (B) 10(C) 100 (D) 1000 Answer:

Description : Reynolds number for flow of water at room temperature through 2 cm dia pipe at an average velocity of 5 cm/sec is around (A) 2000 (B) 10 (C) 100 (D) 1000 Answer:

Last Answer : (D) 1000

Transition from laminar to turbulent zone in free convection heat transfer is governed by the critical value of (A) Grashoff number (B) Grashoff number & Reynolds number (C) Reynolds number (D) Grashoff number & Prandtl number

Description : Transition from laminar to turbulent zone in free convection heat transfer is governed by the critical value of (A) Grashoff number (B) Grashoff number & Reynolds number (C) Reynolds number (D) Grashoff number & Prandtl number

Last Answer : Option D

If the depth of water in an open channel is less than the critical depth, the flow is called (A) Critical flow (B) Turbulent flow (C) Tranquil flow (D) Torrential flow

Description : If the depth of water in an open channel is less than the critical depth, the flow is called (A) Critical flow (B) Turbulent flow (C) Tranquil flow (D) Torrential flow

Last Answer : Answer: Option D

The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid(C) The flow of fluid through the pipe is suddenly brought to rest by closing of the valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Description : The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid (C) The flow of fluid through the pipe is suddenly brought to ... valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Last Answer : Answer: Option C

Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be (A) 1000 kg (B) 4000 kg (C) 2000 kg (D) 8000 kg

Description : Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be (A) 1000 kg (B) 4000 kg (C) 2000 kg (D) 8000 kg

Last Answer : Answer: Option A

If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost of excavation by machine will be equal to the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum

Description : If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost ... the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum

Last Answer : (A) 500 cum

Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000

Description : Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000

Last Answer : (b) 2000

Turbulent flow generally occurs for cases involving (A) Highly viscous fluid (B) Very narrow passages (C) Very slow motion (D) None of these

Description : Turbulent flow generally occurs for cases involving (A) Highly viscous fluid (B) Very narrow passages (C) Very slow motion (D) None of these

Last Answer : (D) None of these

Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Description : Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Last Answer : (A) A forced vortex occurs when fluid rotates as a solid about an axis

As per USP, number of theoretical plates for an analyte peak in HPLC must be? A. More than 2000 B. More than 1000 C. More than 3000 D. More than 4000

Description : As per USP, number of theoretical plates for an analyte peak in HPLC must be? A. More than 2000 B. More than 1000 C. More than 3000 D. More than 4000

Last Answer : A. More than 2000

A large Reynold number is indication of (A) Smooth and streamline flow (B) Laminar flow (C) Steady flow (D) Highly turbulent flow

Description : A large Reynold number is indication of (A) Smooth and streamline flow (B) Laminar flow (C) Steady flow (D) Highly turbulent flow

Last Answer : Answer: Option D

05. The flow in a pipe is laminar, when Reynold number is less than 2000. A) True B) False

Description : 05. The flow in a pipe is laminar, when Reynold number is less than 2000. A) True B) False

Last Answer : A

If the depth of water in an open channel is greater than the critical depth, the flow is called (A) Critical flow (B) Turbulent flow (C) Tranquil flow (D) Torrential flow

Description : If the depth of water in an open channel is greater than the critical depth, the flow is called (A) Critical flow (B) Turbulent flow (C) Tranquil flow (D) Torrential flow

Last Answer : Answer: Option C

Which one of the following pair is correctly matched? [IES-2000] (a) Beauchamp tower ........................First experiments on journal bearings (b) Osborne Reynolds ........................Antifriction bearings (c) Somerfield number........................Pivot and Collar bearings (d) Ball bearings...............................Hydrodynamic lubrication

Description : Which one of the following pair is correctly matched? [IES-2000] (a) Beauchamp tower ........................First experiments on journal bearings (b) Osborne Reynolds ........................ ... .Pivot and Collar bearings (d) Ball bearings...............................Hydrodynamic lubrication

Last Answer : (a) Beauchamp tower ........................First experiments on journal bearings

11. The velocity at which the turbulent flow starts is known as higher critical velocity. A) Yes B) No

Description : 11. The velocity at which the turbulent flow starts is known as higher critical velocity. A) Yes B) No

Last Answer : A

02. A flow in which each liquid particle does not have a definite path and the paths of individual particles also cross each other is called turbulent flow. A) Agree B) Disagree

Description : 02. A flow in which each liquid particle does not have a definite path and the paths of individual particles also cross each other is called turbulent flow. A) Agree B) Disagree

Last Answer : A

A flow in which the quantity of liquid flowing per second is not constant, is called (A) Streamline flow (B) Turbulent flow (C) Steady flow (D) Unsteady flow

Description : A flow in which the quantity of liquid flowing per second is not constant, is called (A) Streamline flow (B) Turbulent flow (C) Steady flow (D) Unsteady flow

Last Answer : Answer: Option D

A flow in which the viscosity of fluid is dominating over the inertia force is called (A) Steady flow (B) Unsteady flow (C) Laminar flow (D) Turbulent flow

Description : A flow in which the viscosity of fluid is dominating over the inertia force is called (A) Steady flow (B) Unsteady flow (C) Laminar flow (D) Turbulent flow

Last Answer : Answer: Option C

The flow in which conditions do not change with time at any point, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Description : The flow in which conditions do not change with time at any point, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Last Answer : Answer: Option C

A flow in which each liquid particle has a definite path, and the paths of individual particles do not cross each other, is called (A) Steady flow (B) Uniform flow (C) Streamline flow (D) Turbulent flow

Description : A flow in which each liquid particle has a definite path, and the paths of individual particles do not cross each other, is called (A) Steady flow (B) Uniform flow (C) Streamline flow (D) Turbulent flow

Last Answer : Answer: Option C

General energy equation holds for (A) Steady flow (B) Turbulent flow (C) Laminar flow (D) Non-uniform flow

Description : General energy equation holds for (A) Steady flow (B) Turbulent flow (C) Laminar flow (D) Non-uniform flow

Last Answer : Answer: Option D

A flow in which the quantity of liquid flowing per second is constant, is called __________ flow. (A) Steady (B) Streamline (C) Turbulent (D) Unsteady

Description : A flow in which the quantity of liquid flowing per second is constant, is called __________ flow. (A) Steady (B) Streamline (C) Turbulent (D) Unsteady

Last Answer : Answer: Option A

A flow in which __________ force is dominating over the viscosity is called turbulent flow. (A) Elastic (B) Surface tension (C) Viscous (D) Inertia

Description : A flow in which __________ force is dominating over the viscosity is called turbulent flow. (A) Elastic (B) Surface tension (C) Viscous (D) Inertia

Last Answer : Answer: Option D

When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Description : When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Last Answer : Answer: Option C

The flow in which the velocity vector is identical in magnitude and direction at every point, for any given instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Description : The flow in which the velocity vector is identical in magnitude and direction at every point, for any given instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Last Answer : Answer: Option B

The flow which neglects changes in a transverse direction is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Description : The flow which neglects changes in a transverse direction is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Last Answer : Answer: Option A