Finer grinding of cement (A) Affects only the early development of strength (B) Affects only the ultimate strength (C) Both (A) and (B) (D) Does not affect the strength

Finer grinding of cement
(A) Affects only the early development of strength
(B) Affects only the ultimate strength
(C) Both (A) and (B)
(D) Does not affect the strength
by

1 Answer

Answer :

Answer: Option A
by

Related questions

The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Description : The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Last Answer : Answer: Option C

Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Description : Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Description : Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Last Answer : Answer: Option A

Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Description : Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Last Answer : Answer: Option B

Use of grinding aids results in the (A) Enhanced production rate (B) Finer products (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Use of grinding aids results in the (A) Enhanced production rate (B) Finer products (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Description : In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

As the product becomes finer, the energy required for grinding (A) Decreases (B) Increases (C) Is same as for coarser grinding (D) Is 1.5 times that for coarser grinding

Description : As the product becomes finer, the energy required for grinding (A) Decreases (B) Increases (C) Is same as for coarser grinding (D) Is 1.5 times that for coarser grinding

Last Answer : (B) Increases

For grinding of softer materials, the grinding wheel should have __________ grain size. (A) Finer (B) Coarser (C) Medium (D) Any type of

Description : For grinding of softer materials, the grinding wheel should have __________ grain size. (A) Finer (B) Coarser (C) Medium (D) Any type of

Last Answer : (B) Coarser

Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Description : Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Last Answer : Answer: Option B

Soundness test of cement determines (A) Quality of free lime (B) Ultimate strength (C) Durability (D) Initial setting

Description : Soundness test of cement determines (A) Quality of free lime (B) Ultimate strength (C) Durability (D) Initial setting

Last Answer : Answer: Option A

Ultimate strength to cement is provided by (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Ultimate strength to cement is provided by (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option B

The following compound has the property of early strength as well as ultimate strength [ A ] C3S [ B ] C2S [ C ] C3A [ D ] C4AF

Description : The following compound has the property of early strength as well as ultimate strength [ A ] C3S [ B ] C2S [ C ] C3A [ D ] C4AF

Last Answer : [ A ] C3S

Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Description : Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Last Answer : Answer: Option D

Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Description : Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Last Answer : Answer: Option B

Rapid hardening cement is used (a) Where high early strength is desired (b) Where form work is to be removed as early as possible (c) For construction of road pavements. (d) All of the above

Description : Rapid hardening cement is used (a) Where high early strength is desired (b) Where form work is to be removed as early as possible (c) For construction of road pavements. (d) All of the above

Last Answer : (d) All of the above

High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Description : High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Last Answer : (d) All the above

Which compound in cement, gives early age strength (a) C3S (b) C2S (c) C3A (d) C4AF

Description : Which compound in cement, gives early age strength (a) C3S (b) C2S (c) C3A (d) C4AF

Last Answer : (a) C3S

Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of cement (C) The phenomenon by virtue of which cement does not allow transmission of sound, is known as soundness of cement (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Description : Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of ... (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Last Answer : Answer: Option C

For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete (1 : 2 : 4) is laid on the base course and the surface is made smooth by trowelling (C) Glass strips are driven into the layer according to the pattern required (D) After final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Description : For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete ... final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Last Answer : Answer: Option B

The degree of grinding of cement is called (a) Fineness (b) Soundness (c)Impact value (d) Bulking

Description : The degree of grinding of cement is called (a) Fineness (b) Soundness (c)Impact value (d) Bulking

Last Answer : (a) Fineness

After the final grinding, the cement is sieved through IS sieve number (a) 9 (b) 12 (c) 24 (d) 48

Description : After the final grinding, the cement is sieved through IS sieve number (a) 9 (b) 12 (c) 24 (d) 48

Last Answer : (a) 9

Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) The on-shore wind helps to produce wave action as well as rise of M.S.L. (C) A falling hydraulic gradient occurs in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Description : Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) ... in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Last Answer : (C) A falling hydraulic gradient occurs in the direction of the wave

Select the incorrect statement (A) Lean mixes bleed more as compared to rich ones. (B) Bleeding can be minimized by adding pozzolana finer aggregate (C) Bleeding can be increased by addition 'of calcium chloride (D) None of the above

Description : Select the incorrect statement (A) Lean mixes bleed more as compared to rich ones. (B) Bleeding can be minimized by adding pozzolana finer aggregate (C) Bleeding can be increased by addition 'of calcium chloride (D) None of the above

Last Answer : Answer: Option D

Two different channels, M and N, in two different sites are designed based on Lacey’s theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) Channel M will have steeper longitudinal slope b) Channel N will have steeper longitudinal slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Description : Two different channels, M and N, in two different sites are designed based on Lacey's theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) ... slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Last Answer : b) Channel N will have steeper longitudinal slope

Harshness in concrete is due to the excess of (a) Water (b) Finer particles (c) Middle sized particles (d) Coarse particles

Description : Harshness in concrete is due to the excess of (a) Water (b) Finer particles (c) Middle sized particles (d) Coarse particles

Last Answer : (c) Middle sized particles

Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial setting rate (C) Acid resistant cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Description : Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial ... cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Last Answer : (A) High early strength cement are made from materials having high silica to lime ratio

For a loose sand sample and a dense sand sample consolidated to the same effective stress (A) Ultimate strength is same and also peak strength is same (B) Ultimate strength is different but peak strength is same (C) Ultimate strength is same but peak strength of dense sand is greater than that of loose sand (D) Ultimate strength is same but peak

Description : For a loose sand sample and a dense sand sample consolidated to the same effective stress (A) Ultimate strength is same and also peak strength is same (B) Ultimate strength is different but peak strength ... of dense sand is greater than that of loose sand (D) Ultimate strength is same but peak

Last Answer : (C) Ultimate strength is same but peak strength of dense sand is greater than that of loose sand

The Mohr's straight theory is based on the following fact: (A) Material fails essentially by shear (B) Ultimate strength of the material is determined by the stress in the plane of slip (C) Failure criterion is independent of the intermediate principal stress (D) All the above

Description : The Mohr's straight theory is based on the following fact: (A) Material fails essentially by shear (B) Ultimate strength of the material is determined by the stress in the plane of slip (C) Failure criterion is independent of the intermediate principal stress (D) All the above

Last Answer : Answer: Option D

Ultimate strength of cold drawn high steel wires (A) Increases with increase in diameter of bar (B) Decreases with increase in diameter of bar (C) Does not depend on diameter of bar (D) None of the above

Description : Ultimate strength of cold drawn high steel wires (A) Increases with increase in diameter of bar (B) Decreases with increase in diameter of bar (C) Does not depend on diameter of bar (D) None of the above

Last Answer : Answer: Option B

The ultimate tensile strength of structural mild steel is about (A) 160 N/mm² (B) 260 N/mm² (C) 420 N/mm² (D) 520 N/mm2

Description : The ultimate tensile strength of structural mild steel is about (A) 160 N/mm² (B) 260 N/mm² (C) 420 N/mm² (D) 520 N/mm

Last Answer : Answer: Option C

The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending strength and axial yield strength of material (c) Buckling strength based on the net area of the section and percentage elongation at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

The safe strengths for the materials are called their [ A ] Ultimate strength [ B ] Characteristic strength [ C ] Maximum strength [ D ] none of the above

Description : The safe strengths for the materials are called their [ A ] Ultimate strength [ B ] Characteristic strength [ C ] Maximum strength [ D ] none of the above

Last Answer : [ B ] Characteristic strength

The safe strengths for the materials are called their [ A ] Ultimate strength [ B ] Characteristic strength [ C ] Maximum strength [ D ] none of the above

Description : The safe strengths for the materials are called their [ A ] Ultimate strength [ B ] Characteristic strength [ C ] Maximum strength [ D ] none of the above

Last Answer : [ B ] Characteristic strength

(1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco and most non-specialty grout. It usually originates from limestone. It is a fine powder produced by grinding Portland cement. clinker (more than 90%), a limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Pick out the wrong statement. (A) Close circuit grinding is more economical than open circuit grinding (B) Cod oil, beef tallow or aluminium stearates are used as grinding aids in cement 'industries' (C) The equipment used for the removal of traces of solids from a liquid is called a classifier (D) Size enlargement is a mechanical operation exemplified by medicinal tablet making

Description : Pick out the wrong statement. (A) Close circuit grinding is more economical than open circuit grinding (B) Cod oil, beef tallow or aluminium stearates are used as grinding aids in cement ... is called a classifier (D) Size enlargement is a mechanical operation exemplified by medicinal tablet making

Last Answer : (C) The equipment used for the removal of traces of solids from a liquid is called a classifier

The impurity of mixing water which affects the setting time and strength of concrete, is (A) Sodium sulphates (B) Sodium chlorides (C) Sodium carbonates and bicarbonates (D) Calcium bicarbonates

Description : The impurity of mixing water which affects the setting time and strength of concrete, is (A) Sodium sulphates (B) Sodium chlorides (C) Sodium carbonates and bicarbonates (D) Calcium bicarbonates

Last Answer : Answer: Option C

Consider the following statements: Cement mortars richer than 1 : 3 are not used in masonry work because 1. There is no gain in strength of masonry 2. There is high shrinkage 3. They are prone to segregation Which of these statements are correct? (a) 1, 2 and 3 (b) 1 and 2 only (c) 2 and 3 only (d) 1 and 3 only

Description : Consider the following statements: Cement mortars richer than 1 : 3 are not used in masonry work because 1. There is no gain in strength of masonry 2. There is high shrinkage 3. They are prone to segregation Which of these statements ... 1, 2 and 3 (b) 1 and 2 only (c) 2 and 3 only (d) 1 and 3 only

Last Answer : (b) 1 and 2 only

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

Increase in water content in a cement concrete (i) Increases workability (ii) Increases the strength [ A ] i [ B ] ii [ C ] both (i) and (ii) [ D ] neither (i) nor (ii)

Description : Increase in water content in a cement concrete (i) Increases workability (ii) Increases the strength [ A ] i [ B ] ii [ C ] both (i) and (ii) [ D ] neither (i) nor (ii)

Last Answer : [ A ] i

Defect of High joint is due to ? (i) Early trimming of weld (ii) Excess provision of height during alignment.* (iii) Early grinding of weld (iv) None of above

Description : Defect of High joint is due to ? (i) Early trimming of weld (ii) Excess provision of height during alignment.* (iii) Early grinding of weld (iv) None of above

Last Answer : (ii) Excess provision of height during alignment.

Defect of low joint is due to? (i) Excess height (ii) Early trimming of weld (iii) Early grinding of weld (iv) Nil/Less provision of height during alignment.

Description : Defect of low joint is due to? (i) Excess height (ii) Early trimming of weld (iii) Early grinding of weld (iv) Nil/Less provision of height during alignment.

Last Answer : (iv) Nil/Less provision of height during alignment.

Defect of cracks in weld is mainly due to? (i) Early opening of mould.* (ii) Early trimming of weld (iii) Early grinding of weld (iv) None of above

Description : Defect of cracks in weld is mainly due to? (i) Early opening of mould.* (ii) Early trimming of weld (iii) Early grinding of weld (iv) None of above

Last Answer : (i) Early opening of mould.*

Money is said to be neutral if (a) it affects the real variables of the economy. (b) it does not affect the real variables of the economy. (c) it affects only the production. (d) it affects both production & employment.

Description : Money is said to be neutral if (a) it affects the real variables of the economy. (b) it does not affect the real variables of the economy. (c) it affects only the production. (d) it affects both production & employment.

Last Answer : (b) it does not affect the real variables of the economy.

hich of the following is the most suitable abrasive for grinding high tensile strength materials? (A) Silicon carbide (B) Corundum (C) Aluminium oxide (D) Boron carbide

Description : hich of the following is the most suitable abrasive for grinding high tensile strength materials? (A) Silicon carbide (B) Corundum (C) Aluminium oxide (D) Boron carbide

Last Answer : Option C

With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Description : With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Last Answer : (A) Impact strength

Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Description : Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Last Answer : a) Rate of wear

For maximum strength and durability minimum percentage of cement, by weight is (A) 15 % (B) 20 % (C) 25 % (D) 30 %

Description : For maximum strength and durability minimum percentage of cement, by weight is (A) 15 % (B) 20 % (C) 25 % (D) 30 %

Last Answer : Answer: Option D

Newly constructed pavement with ordinary Portland cement attains its working strength after (A) 7 days (B) 14 days (C) 21 days (D) 28 days

Description : Newly constructed pavement with ordinary Portland cement attains its working strength after (A) 7 days (B) 14 days (C) 21 days (D) 28 days

Last Answer : Answer: Option D

Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5(C) 7.0 (D) 7.5

Description : Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5 (C) 7.0 (D) 7.5

Last Answer : Answer: Option B

Pick up the incorrect statement from the following. If water cement ratio is (A) Increased, strength of concrete increases (B) Decreased, strength of concrete increases(D) None of these (C) Increased, strength of concrete is not affected

Description : Pick up the incorrect statement from the following. If water cement ratio is (A) Increased, strength of concrete increases (B) Decreased, strength of concrete increases (C) Increased, strength of concrete is not affected (D) None of these

Last Answer : Answer: Option C