Fat splitting catalyst is(A) CaCO3(B) ZnO(C) Al2O3(D) Fe

Fat splitting catalyst is
(A) CaCO3
(B) ZnO
(C) Al2O3
(D) Fe
by

1 Answer

Answer :

(B) ZnO
by

Related questions

__________ is used as a catalyst in fat splitting. (A) ZnO (B) Ni (C) V2O5 (D) FeO

Description : __________ is used as a catalyst in fat splitting. (A) ZnO (B) Ni (C) V2O5 (D) FeO

Last Answer : (A) ZnO

Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (B) (i) - Fe/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Description : Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/ ... (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Last Answer : (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3

Which of the following agents is used in order to make benzene react with bromine to give bromobenzene? (a) Ultraviolet light (b) Fe catalyst (c) Nickel catalyst (d) Al2O3 catalyst

Description : Which of the following agents is used in order to make benzene react with bromine to give bromobenzene? (a) Ultraviolet light (b) Fe catalyst (c) Nickel catalyst (d) Al2O3 catalyst

Last Answer : Fe catalyst

What are amphoteric oxides? Choose the amphoteric oxides from amongst the following oxides: Na2O, ZnO, Al2O3, CO2, H2O -Chemistry

Description : What are amphoteric oxides? Choose the amphoteric oxides from amongst the following oxides: Na2O, ZnO, Al2O3, CO2, H2O -Chemistry

Last Answer : Those oxides which reacts with acids as well as bases to produce salts and water are called amphoteric oxides, e.g. Na2O, ZnO, are amphoteric oxides among given oxides.

Considering the endothermic dissociation of CaCO3 in a closed vessel (CaCO3 ⇌ CaO + CO2 ), the pressure of CO2 increases, if (A) A catalyst is added (B) The temperature is increased (C) An inert gas is pumped keeping the temperature constant (D) None of these

Description : Considering the endothermic dissociation of CaCO3 in a closed vessel (CaCO3 ⇌ CaO + CO2 ), the pressure of CO2 increases, if (A) A catalyst is added (B) The temperature is increased (C) An inert gas is pumped keeping the temperature constant (D) None of these

Last Answer : (B) The temperature is increased

Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Last Answer : (C) K2O

Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Description : Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Last Answer : (B) K2O

Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3

Description : Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3

Last Answer : (A) AgO

Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Description : Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Last Answer : (C) V2O5

Which of the following agents is used in order to make benzene react with acetyl chloride to give acetophenone?(a) Ultraviolet light (b) AlCl3 catalyst (c) Platinum catalyst (d) Al2O3 catalyst

Description : Which of the following agents is used in order to make benzene react with acetyl chloride to give acetophenone? (a) Ultraviolet light (b) AlCl3 catalyst (c) Platinum catalyst (d) Al2O3 catalyst

Last Answer : AlCl3 catalyst

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

The catalyst used in hydrogenation of oils is - (1) Fe (2) V2O5 (3) Ni (4) O2

Description : The catalyst used in hydrogenation of oils is - (1) Fe (2) V2O5 (3) Ni (4) O2

Last Answer : (3) Ni Explanation: The catalyst used in hydrogenation of oils is nickel. It is used to speed up the reaction. Vegetable oils convert into vanaspati after hydrogenation.

In stratosphere, which of the following element acts as a catalyst in degradation of ozone a release of molecular oxygen ? (1) Carbon (2) Cl (3) Fe (4) Oxygen

Description : In stratosphere, which of the following element acts as a catalyst in degradation of ozone a release of molecular oxygen ? (1) Carbon (2) Cl (3) Fe (4) Oxygen

Last Answer : (2) Cl

Co-efficient of thermal expansion of glass is decreased by the addition of __________ during its manufacture. (A) CaO (B) MnO2 (C) ZnO (D) FeS

Description : Co-efficient of thermal expansion of glass is decreased by the addition of __________ during its manufacture. (A) CaO (B) MnO2 (C) ZnO (D) FeS

Last Answer : (C) ZnO

Raw materials for urea production are (A) CO2 and N2 (B) CO2 , H2 and N2 (C) NH3 and CO (D) HNO3 and CaCO3

Description : Raw materials for urea production are (A) CO2 and N2 (B) CO2 , H2 and N2 (C) NH3 and CO (D) HNO3 and CaCO3

Last Answer : (B) CO2 , H2 and N2

Calcination reaction of limestone (CaCO3 → CaO + CO2 ) goes to completion in the rotary kiln, because (A) CaO is not dissociated (B) CO2 escapes continuously (C) Of high calcination temperature (D) CaO is more stable than CaCO3

Description : Calcination reaction of limestone (CaCO3 → CaO + CO2 ) goes to completion in the rotary kiln, because (A) CaO is not dissociated (B) CO2 escapes continuously (C) Of high calcination temperature (D) CaO is more stable than CaCO3

Last Answer : (B) CO2 escapes continuously

In case of calcination of limestone, CaCO3 CaO + CO2 , the addition of more of CaO will result in __________ in the concentration of CO2 . (A) No change (B) Increase (C) Decrease (D) Unpredictable from the data

Description : In case of calcination of limestone, CaCO3 CaO + CO2 , the addition of more of CaO will result in __________ in the concentration of CO2 . (A) No change (B) Increase (C) Decrease (D) Unpredictable from the data

Last Answer : (A) No change

Main constituent of dolomite is (A) CaCO3 (B) MgCO3 (C) K2CO3 (D) Na2CO3

Description : Main constituent of dolomite is (A) CaCO3 (B) MgCO3 (C) K2CO3 (D) Na2CO3

Last Answer : (B) MgCO3

Pick out the endothermic reaction out of the following. (A) C+ ½O2 = CO (B) CO + 3H2 = CH4 + H2O (C) CaCO3 = CaO + CO2 (D) CO + ½O2 = CO2

Description : Pick out the endothermic reaction out of the following. (A) C+ ½O2 = CO (B) CO + 3H2 = CH4 + H2O (C) CaCO3 = CaO + CO2 (D) CO + ½O2 = CO2

Last Answer : (C) CaCO3 = CaO + CO2

Main constituent of limestone is (A) CaCO3 (B) MgCO3 (C) Na2CO3 (D) CaSO4

Description : Main constituent of limestone is (A) CaCO3 (B) MgCO3 (C) Na2CO3 (D) CaSO4

Last Answer : (A) CaCO3

The main constituent of bones is (A) CaF2 (B) Ca3(PO4)2 (C) CaCO3 (D) CaCl2

Description : The main constituent of bones is (A) CaF2 (B) Ca3(PO4)2 (C) CaCO3 (D) CaCl2

Last Answer : (B) Ca3(PO4)2

Cement mainly contains (A) CaO, SiO2 , Al2O3 (B) MgO, SiO2 , K2O (C) Al2O3 , MgO, Fe2O3 (D) CaO, MgO, K2O

Description : Cement mainly contains (A) CaO, SiO2 , Al2O3 (B) MgO, SiO2 , K2O (C) Al2O3 , MgO, Fe2O3 (D) CaO, MgO, K2O

Last Answer : (A) CaO, SiO2 , Al2O3

Portland cement consists mainly of (A) CaO & SiO2 (B) SiO2 & Al2O3 (C) CaO & Al2O3 (D) CaO & Fe2O3

Description : Portland cement consists mainly of (A) CaO & SiO2 (B) SiO2 & Al2O3 (C) CaO & Al2O3 (D) CaO & Fe2O3

Last Answer : (A) CaO & SiO2

Which of the following is the second major component of cement? (A) Al2O3(B) SiO2(C) CaO(D) Fe2O3

Description : Which of the following is the second major component of cement? (A) Al2O3 (B) SiO2 (C) CaO (D) Fe2O3

Last Answer : (B) SiO2

Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of the aluminium deposited on the cathode comes from cryolite (C) Sodium is deposited along with aluminium, but is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3

More than 95% of __________ is present in corundum. (A) SiO2 (B) Al2O3 (C) CaSiO2 (D) MgO

Description : More than 95% of __________ is present in corundum. (A) SiO2 (B) Al2O3 (C) CaSiO2 (D) MgO

Last Answer : B) Al2O3

Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P

Description : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P

Last Answer : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P

The Al2O3 content of cryolite in Hall-Heroult cell is maintained between __________ percent. (A) 2-5 (B) 18-20 (C) 12-15 (D) 6-12

Description : The Al2O3 content of cryolite in Hall-Heroult cell is maintained between __________ percent. (A) 2-5 (B) 18-20 (C) 12-15 (D) 6-12

Last Answer : (A) 2-5

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

What is the trade name of ZnO ?

Description : What is the trade name of ZnO ?

Last Answer : ZnO 's trade name is Ginsite.

Givecn that : `Zn+1//2O_(2)rarr ZnO+84000` cal ……………1 `Hg+1//2O_(2)rarr HgO+21700` cal …………2 The heat of reaction `(Delta H)` for, `Zn+HgO rarr ZnO+Hg

Description : Givecn that : `Zn+1//2O_(2)rarr ZnO+84000` cal ……………1 `Hg+1//2O_(2)rarr HgO+21700` cal …………2 The heat of reaction `(Delta H)` for, `Zn+HgO rarr ZnO+Hg

Last Answer : Givecn that : `Zn+1//2O_(2)rarr ZnO+84000` cal 1 `Hg+1//2O_(2)rarr HgO+21700` cal 2 ... cal B. 62300 cal C. `-105700` cal D. `-62300` cal

Which of the following is produced during the following reaction ? `CO(g)+H_(2)overset(575K)underset(ZnO,Cr_(2)O_(3))rarr` ……?

Description : Which of the following is produced during the following reaction ? `CO(g)+H_(2)overset(575K)underset(ZnO,Cr_(2)O_(3))rarr` ……?

Last Answer : Which of the following is produced during the following reaction ? `CO(g)+H_(2)overset(575K)underset(ZnO,Cr_(2)O_ ... 3)COOH` C. `HCOOH` D. `CH_(3)OH`

Assertion : Reduction of ZnO with carbon is done at `1100^(@)C`. Reason : At this temperature, `DeltaG^(@)` is negative and the process is spontaneous

Description : Assertion : Reduction of ZnO with carbon is done at `1100^(@)C`. Reason : At this temperature, `DeltaG^(@)` is negative and the process is spontaneous

Last Answer : Assertion : Reduction of ZnO with carbon is done at `1100^(@)C`. Reason : At this temperature, ... ^(@)` is negative and the process is spontaneous.

Extraction of Zn is based on the following thermodynamic reaction. (A)` 2ZnS + 3O_(2) to 2ZnO+ 2SO_(2)` (B) `ZnO + C to Zn + CO" " DeltaG_(f)^(0)` are

Description : Extraction of Zn is based on the following thermodynamic reaction. (A)` 2ZnS + 3O_(2) to 2ZnO+ 2SO_(2)` (B) `ZnO + C to Zn + CO" " DeltaG_(f)^(0)` are

Last Answer : Extraction of Zn is based on the following thermodynamic reaction. (A)` 2ZnS + 3O_(2) to 2ZnO+ 2SO_(2)` (B) ... (5) J//"mol"` The value of X a will be

Go through the following graph and answer the following questions. To make the following reduction process spontaneous, temprature should be : `ZnO+C

Description : Go through the following graph and answer the following questions. To make the following reduction process spontaneous, temprature should be : `ZnO+C

Last Answer : Go through the following graph and answer the following questions. To make the following reduction process spontaneous, ... )C " but " lt 1000^(@)C`

In Belgan process, for reduction of ZnO to Zn reductant is

Description : In Belgan process, for reduction of ZnO to Zn reductant is

Last Answer : In Belgan process, for reduction of ZnO to Zn reductant is A. Water gas B. Coal or Coke C. Al D. `H_(2)`

In the following reaction: `ZnS+O_(2)overset(Delta)rarrA+ZnO` `4HCl+O_(2)overset(CuCl_(2))rarrB+2H_(2)O` `A+B overset(hv)rarrC` Then A, B and C are:

Description : In the following reaction: `ZnS+O_(2)overset(Delta)rarrA+ZnO` `4HCl+O_(2)overset(CuCl_(2))rarrB+2H_(2)O` `A+B overset(hv)rarrC` Then A, B and C are:

Last Answer : In the following reaction: `ZnS+O_(2)overset(Delta)rarrA+ZnO` `4HCl+O_(2)overset(CuCl_(2))rarrB+2H_(2)O` ` ... SOCl_(2)` D. `SO_(3),HClO_(3),HClO_(4)`

Plants take zinc in the form of (a) ZnSO4 (b) Zn++ (c) ZnO (d) Zn.

Description : Plants take zinc in the form of (a) ZnSO4 (b) Zn++ (c) ZnO (d) Zn.

Last Answer : (b) Zn++

Calculate the mass of 6.022 × 1023 molecule of Calcium carbonate (CaCO3) -Chemistry 9th

Description : Calculate the mass of 6.022 × 1023 molecule of Calcium carbonate (CaCO3) -Chemistry 9th

Last Answer : Molar mass (Molecular mass in gram) of CaCO3 = 40+12+3×16 = 100 g No. of moles of CaCO3 = No. of molecules/Avogadro constant = 6.022 × 1023/ 6.022 × 1023 = 1 mole Mass of CaCO3 = No. of moles × molar mass = 1 × 100 g = 100 g

Find the mass of 0.5 moles of CaCO3 -Chemistry 9th

Description : Find the mass of 0.5 moles of CaCO3 -Chemistry 9th

Last Answer : 50 Grams Explaination : Molar mass of CaCO3 = 40(mass of Calcium ) + 12(mass of Carbon ) + 16(mass of Oxygen )*3 No of moles = Given mass / Molar mass 0.5 = Given mass / 100gm Mass = 100 x 0.5 = 50 gms

What are the spectator ions in the given balanced chemical equation CaCI2(aq) plus k2CO3(aq) CaCO3 (s) plus 2 KCI (aq)?

Description : What are the spectator ions in the given balanced chemical equation CaCI2(aq) plus k2CO3(aq) CaCO3 (s) plus 2 KCI (aq)?

Last Answer : Need answer

How many grams of LiOH is formed from 25.0 g of CaOH given the following equation... Ca(OH)2 plus Li2CO3 ----- and gt CaCO3 plus 2Li(OH) What is the answer and how did you get it?

Description : How many grams of LiOH is formed from 25.0 g of CaOH given the following equation... Ca(OH)2 plus Li2CO3 ----- and gt CaCO3 plus 2Li(OH) What is the answer and how did you get it?

Last Answer : The chemical reaction is:Li2CO3 + Ca(OH)2 = 2 LiOH + CaCO3Molar maass of LiOH is 23,95 g; molar mass of calcium hydroxide is 74,093 g.74,093 g Ca(OH)2----------------2.23,95 g LiOH25 g Ca(OH)2----------------------xx = (25 x 2 x 23,95)/74,093 = 16,2 g LiOH

Lime (CaCO3 ) is added to neutralize

Description : Lime (CaCO3 ) is added to neutralize

Last Answer : Ans. Acid soils

Stalactites and Stalagmites form due to the precipitation of : (1) CaCO3 (2) CaCl2 (3) MgCl2 (4) MgCO3

Description : Stalactites and Stalagmites form due to the precipitation of : (1) CaCO3 (2) CaCl2 (3) MgCl2 (4) MgCO3

Last Answer : (1) CaCO3 Explanation: Stalactites and stalagmites are formed by water dripping or flowing from fractures on the ceiling of a cave. The dominant mineral in them is calcite (calcium carbonate) ... minerals that may be deposited include other carbonates, opal, chalcedony, limonite, and some sulfides.

Calcium acetate on strong heating gives (a) Methane + CaCO3 (b) Ethane + CaCO3 (c) Acetone + CaCO3 (d) Ethane + CaO

Description : Calcium acetate on strong heating gives (a) Methane + CaCO3 (b) Ethane + CaCO3 (c) Acetone + CaCO3 (d) Ethane + CaO

Last Answer : Acetone + CaCO3

Formula for quick lime, is (A) CaCO3 (B) Ca(OH)2 (C) CO3CO2 (D) None to thes

Description : Formula for quick lime, is (A) CaCO3 (B) Ca(OH)2 (C) CO3CO2 (D) None to thes

Last Answer : Answer: Option A

Which of the following is the chemical formula for calcite? w) CaCO3 x) CaMgSO4 y) FeCO3 z) FeS2

Description : Which of the following is the chemical formula for calcite? w) CaCO3 x) CaMgSO4 y) FeCO3 z) FeS2

Last Answer : ANSWER: W -- CaCO3

Stalactites and Stalagmites form due to the precipitation of : (1) CaCO3 (2) CaCl2 (3) MgCl2 (4) MgCO3

Description : Stalactites and Stalagmites form due to the precipitation of : (1) CaCO3 (2) CaCl2 (3) MgCl2 (4) MgCO3

Last Answer : CaCO3

If 0.905 mol of Al2O3 is produced what mass of iron is also produced?

Description : If 0.905 mol of Al2O3 is produced what mass of iron is also produced?

Last Answer : Need answer

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Last Answer : Answer: Option D