Increase in temperature, in general results in the (A) Decrease in the viscosities of both liquids & gases (B) Increase in the viscosities of both liquids & gases (C) Increase in the viscosity of liquids and decrease in that of gases (D) Decrease in the viscosity of liquids and increase in that of gases

Increase in temperature, in general results in the
(A) Decrease in the viscosities of both liquids & gases
(B) Increase in the viscosities of both liquids & gases
(C) Increase in the viscosity of liquids and decrease in that of gases (D) Decrease in the viscosity of liquids and increase in that of gases
by

1 Answer

Answer :

(D) Decrease in the viscosity of liquids and increase in that of gases
by

Related questions

Viscosity of gases __________ with increase in temperature. (A) Increase very rapidly (B) Increase slowly (C) Decrease slowly (D) Remain unaffected

Description : Viscosity of gases __________ with increase in temperature. (A) Increase very rapidly (B) Increase slowly (C) Decrease slowly (D) Remain unaffected

Last Answer : (B) Increase slowly

The increase of temperature results in (A) Increase in viscosity of gas (B) Increase in viscosity of liquid (C) Decrease in viscosity of gas (D) Decrease in viscosity of liquid

Description : The increase of temperature results in (A) Increase in viscosity of gas (B) Increase in viscosity of liquid (C) Decrease in viscosity of gas (D) Decrease in viscosity of liquid

Last Answer : Answer: Option D

The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

For very great pressures, viscosity of moss gases and liquids (A) Remain same (B) Increases (C) Decreases (D) Shows erratic behaviou

Description : For very great pressures, viscosity of moss gases and liquids (A) Remain same (B) Increases (C) Decreases (D) Shows erratic behaviour

Last Answer : Answer: Option D

With increase in temperature, the solubility of gases in liquids, at fixed pressure (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system

Description : With increase in temperature, the solubility of gases in liquids, at fixed pressure (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system

Last Answer : (B) Decreases

For gases, the thermal conductivity increases with temperature rise. For liquids, with increase in concentration, its thermal conductivity generally (A) Decreases (B) Increases (C) Remains unchanged (D) Increases exponentially

Description : For gases, the thermal conductivity increases with temperature rise. For liquids, with increase in concentration, its thermal conductivity generally (A) Decreases (B) Increases (C) Remains unchanged (D) Increases exponentially

Last Answer : (A) Decreases

Pick out the wrong conversion of absolute & kinematic viscosities. (A) 1 stoke = 1 cm2/sec (B) 1 N.sec/m2 = 10 paise (C) 1 stoke = 1 m2/sec (D) 1 m2/sec = 104 stokes

Description : Pick out the wrong conversion of absolute & kinematic viscosities. (A) 1 stoke = 1 cm2/sec (B) 1 N.sec/m2 = 10 paise (C) 1 stoke = 1 m2/sec (D) 1 m2/sec = 104 stokes

Last Answer : (C) 1 stoke = 1 m2/sec

Choose the wrong statement (A) Viscosity of a fluid is that property which determines the amount of its resistance to a shearing force (B) Viscosity is due primarily to interaction between fluid molecules (C) Viscosity of liquids decreases with increase in temperature (D) Viscosity of liquid

Description : Choose the wrong statement (A) Viscosity of a fluid is that property which determines the amount of its resistance to a shearing force (B) Viscosity is due primarily to interaction between fluid molecules (C) Viscosity of liquids decreases with increase in temperature (D) Viscosity of liquid

Last Answer : Answer: Option D

Forced circulation evaporators are normally used for concentrating liquids having (A) Scaling characteristics (B) High viscosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Forced circulation evaporators are normally used for concentrating liquids having (A) Scaling characteristics (B) High viscosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Thermal conductivities of most of the liquids __________ with rise in temperature.(A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

Low temperature oxidation of stored coal results in the (A) Decrease in its caking power & calorific value (B) Decrease in its carbon & hydrogen content (C) Increase in its oxygen content (D) All (A), (B) and (A)

Description : Low temperature oxidation of stored coal results in the (A) Decrease in its caking power & calorific value (B) Decrease in its carbon & hydrogen content (C) Increase in its oxygen content (D) All (A), (B) and (A)

Last Answer : (D) All (A), (B) and (A)

Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available (B) One of the liquid components is heat sensitive (C) Viscosity of liquid components is very high (D) One of the liquid components has very high affinity towards the solvent

Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent

Last Answer : (D) One of the liquid components has very high affinity towards the solvent

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Description : With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

. Pick out the wrong statement. (A) The eddy viscosity is a function of(B) The eddy viscosity is a fluid property(C) The viscosity of gas increases with increase in temperature(D) The viscosity of a liquid increases with decrease in temperature the type of turbulence involved

Description : . Pick out the wrong statement. (A) The eddy viscosity is a function of the type of turbulence involved (B) The eddy viscosity is a fluid property (C) The viscosity of gas increases with increase in temperature (D) The viscosity of a liquid increases with decrease in temperature

Last Answer : (B) The eddy viscosity is a fluid property

Turbine impeller (A) Produces only radial current (B) Produces only tangential current (C) Is effective over wide range of viscosities (D) Does not produce tangential current

Description : Turbine impeller (A) Produces only radial current (B) Produces only tangential current (C) Is effective over wide range of viscosities (D) Does not produce tangential current

Last Answer : (C) Is effective over wide range of viscosities

A differential pressure cell is used for (A) Measuring small pressure difference in gases (B) Measuring small pressure difference in liquids (C) Remote recording of pressure difference (D) Measuring the difference of the impact & the static pressure

Description : A differential pressure cell is used for (A) Measuring small pressure difference in gases (B) Measuring small pressure difference in liquids (C) Remote recording of pressure difference (D) Measuring the difference of the impact & the static pressure

Last Answer : (C) Remote recording of pressure difference

Kopp's rule is used to calculate the heat capacity of (A) Solids (B) Liquids (C) Gases (D) All (A), (B) & (C)

Description : Kopp's rule is used to calculate the heat capacity of (A) Solids (B) Liquids (C) Gases (D) All (A), (B) & (C)

Last Answer : (A) Solids

Hot wire anemometer is used to measure the (A) Velocity of liquids (B) Temperature of liquids (C) Velocity of gases (D) Pressure of liquids

Description : Hot wire anemometer is used to measure the (A) Velocity of liquids (B) Temperature of liquids (C) Velocity of gases (D) Pressure of liquids

Last Answer : (C) Velocity of gases

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Dynamic viscosity of most of the liquids with rise in temperature (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable

Description : Dynamic viscosity of most of the liquids with rise in temperature (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable

Last Answer : Answer: Option B

Pick out the wrong statement. (A) Momentum transfer in laminar flow results from velocity gradient (B) A fluid in equilibrium is not free from shear stress (C) The viscosity of a non-Newtonian fluid is a function of temperature only (D) Both (B) and (C)

Description : Pick out the wrong statement. (A) Momentum transfer in laminar flow results from velocity gradient (B) A fluid in equilibrium is not free from shear stress (C) The viscosity of a non-Newtonian fluid is a function of temperature only (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following is generally considered as opaque surface towards radiations? (A) Gases (B) Solids (C) Liquids (D) Both (B) and (C)

Description : Which of the following is generally considered as opaque surface towards radiations? (A) Gases (B) Solids (C) Liquids (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Explain diffusion & its law. Also explain diffusion in gases & liquids.

Description : Explain diffusion & its law. Also explain diffusion in gases & liquids.

Last Answer : Ans : Diffusion : The spreading of a substance through medium like air or liquid is called diffusion. The rate of diffusion of a substance depends upon its molar mass or density. Example : When ... the available space due to their kinetic energy. This spreading of gas is called diffusion in gas.

Vacuum filter is most suitable for the (A) Removal of fines from liquid (B) Liquids having high vapour pressure (C) Liquids of very high viscosity (D) None of these

Description : Vacuum filter is most suitable for the (A) Removal of fines from liquid (B) Liquids having high vapour pressure (C) Liquids of very high viscosity (D) None of these

Last Answer : (D) None of these

During agitation of liquids, power consumption during laminar flow is not proportional to the (A) Density of the liquid (B) Viscosity of the liquid (C) Cube of impeller diameters (D) Square of rotational speed

Description : During agitation of liquids, power consumption during laminar flow is not proportional to the (A) Density of the liquid (B) Viscosity of the liquid (C) Cube of impeller diameters (D) Square of rotational speed

Last Answer : (A) Density of the liquid

__________ are mixed using ribbon blenders. (A) Lumpy solids and low viscosity liquids (B) Dry powders (C) High viscosity liquids (D) Thick pastes

Description : __________ are mixed using ribbon blenders. (A) Lumpy solids and low viscosity liquids (B) Dry powders (C) High viscosity liquids (D) Thick pastes

Last Answer : (B) Dry powders

Paddle agitator (A) Is suitable for mixing low viscosity liquids (B) Produces axial flow (C) Moves at very high speed (D) None of these

Description : Paddle agitator (A) Is suitable for mixing low viscosity liquids (B) Produces axial flow (C) Moves at very high speed (D) None of these

Last Answer : (A) Is suitable for mixing low viscosity liquids

Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller(B) Helical screw(C) Flat blade turbine(D) Curved blade turbine

Description : Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller (B) Helical screw (C) Flat blade turbine (D) Curved blade turbine

Last Answer : (B) Helical screw

Which of the following forced convection heat transfer equation accounts for the liquid viscosity effect for viscous liquids? (A) Dittus-Boelter equation (B) Sieder-Tate equation (C) Nusselt equation (D) None of these

Description : Which of the following forced convection heat transfer equation accounts for the liquid viscosity effect for viscous liquids? (A) Dittus-Boelter equation (B) Sieder-Tate equation (C) Nusselt equation (D) None of these

Last Answer : (B) Sieder-Tate equation

Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Description : Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Last Answer : (C) Partial ionisation

Propellers are (A) Axial flow mixers (B) Low speed impeller (C) Used for mixing liquids of high viscosity (D) Radial flow mixers

Description : Propellers are (A) Axial flow mixers (B) Low speed impeller (C) Used for mixing liquids of high viscosity (D) Radial flow mixers

Last Answer : (A) Axial flow mixers

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

Which statement is false? (a) Many alkanes are soluble in water. (b) All alkanes have a lower density than water. (c) At room temperature some alkanes are liquids, some solids, some gases. (d) All alkanes burn

Description : Which statement is false? (a) Many alkanes are soluble in water. (b) All alkanes have a lower density than water. (c) At room temperature some alkanes are liquids, some solids, some gases. (d) All alkanes burn

Last Answer : Many alkanes are soluble in water

Reynolds number for water flow through a tube of I.D. 5 cm is 1500. If a liquid of 5 centipoise viscosity and 0.8 specific gravity flows in the same pipe at the same velocity, then the pressure drop will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict pressure drop

Description : Reynolds number for water flow through a tube of I.D. 5 cm is 1500. If a liquid of 5 centipoise viscosity and 0.8 specific gravity flows in the same pipe at the same velocity, then the pressure drop will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict pressure drop

Last Answer : (A) Increase

With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Description : With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Last Answer : (B) Decreases

Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the first fluid, the pressure drop will (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Description : Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the ... (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Last Answer : (B) Decrease

An increase in which of the following results in a decrease in the rate of the chemical reaction? (a) temperature (b) concentration (c) collision frequency (d) energy of activation

Description : An increase in which of the following results in a decrease in the rate of the chemical reaction? (a) temperature (b) concentration (c) collision frequency (d) energy of activation

Last Answer : energy of activation

The diffusivity, DAB (for component A diffusing in B) is equal to the diffusivity DBA (for component B diffusing in A) for a binary mixture of (A) Newtonian liquids (B) Non-Newtonian liquids (C) Ideal gases (D) Real gases

Description : The diffusivity, DAB (for component A diffusing in B) is equal to the diffusivity DBA (for component B diffusing in A) for a binary mixture of (A) Newtonian liquids (B) Non-Newtonian liquids (C) Ideal gases (D) Real gases

Last Answer : (C) Ideal gases

In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Description : In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Last Answer : (C) Is independent of pressure

Two liquids manometer is used for measuring small pressure differences in (A) Liquids (B) Gases (C) Mixture of hydrocarbons (D) None of these

Description : Two liquids manometer is used for measuring small pressure differences in (A) Liquids (B) Gases (C) Mixture of hydrocarbons (D) None of these

Last Answer : (A) Liquids

Identification of pipelines carrying different liquids and gases is done by the __________ of the pipe(A) Diameter(B) Colour(C) Altitude(D) None of these.

Description : Identification of pipelines carrying different liquids and gases is done by the __________ of the pipe. (A) Diameter (B) Colour (C) Altitude (D) None of these

Last Answer : (B) Colour

Fugacity is a measure of the (A) Escaping tendencies of the same substance in different phases of a system (B) Relative volatility of a mixture of two miscible liquids (C) Behaviour of ideal gases (D) None of these

Description : Fugacity is a measure of the (A) Escaping tendencies of the same substance in different phases of a system (B) Relative volatility of a mixture of two miscible liquids (C) Behaviour of ideal gases (D) None of these

Last Answer : (A) Escaping tendencies of the same substance in different phases of a system

In liquids and gases the current is due to the motion a. negative charges b. positive charges c. both negative and positive charges d. neutral particles

Description : In liquids and gases the current is due to the motion a. negative charges b. positive charges c. both negative and positive charges d. neutral particles

Last Answer : c. both negative and positive charges

Waxes present in petroleum products (A) Can be separated out by distillation(B) Are not soluble in them(C) Crystallise out at low temperature(D) Decrease their viscosity

Description : Waxes present in petroleum products (A) Can be separated out by distillation (B) Are not soluble in them (C) Crystallise out at low temperature (D) Decrease their viscosity

Last Answer : (C) Crystallise out at low temperature

In general, the limit of inflammability/explosion limit of fuel gases is widened by the (A) Increase in gas pressure (B) Increase in temperature (i.e. preheating) (C) Use of pure oxygen for combustion instead of air (D) All (A), (B) & (C)

Description : In general, the limit of inflammability/explosion limit of fuel gases is widened by the (A) Increase in gas pressure (B) Increase in temperature (i.e. preheating) (C) Use of pure oxygen for combustion instead of air (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel

Description : With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel

Last Answer : (B) Decreases

A fountain pen works on the principle of (1) Flow of liquids from higher to lower potential (2) Capillary action (3) Bernoulli's principle (4) Viscosity of liquids

Description : A fountain pen works on the principle of (1) Flow of liquids from higher to lower potential (2) Capillary action (3) Bernoulli's principle (4) Viscosity of liquids

Last Answer : (2) Capillary action Explanation: A fountain pen is a nib pen that, unlike its predecessor the dip pen, contains an internal reservoir of water-based liquid ink. The pen draws ink from the ... to flow in narrow spaces without the assistance of, and in opposition to external forces like gravity.