Description : For an incompressible fluid, the __________ is a function of both pressure as well as temperature. (A) Internal energy (B) Enthalpy (C) Entropy (D) All (A), (B) & (C)
Last Answer : (B) Enthalpy
Description : Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter
Last Answer : (C) Venturimeter occupies less space than an orificemeter
Description : Applicability of Bernoulli's equation is limited to a/an __________ fluid, that does not exchange shaft work with the surroundings. (A) Incompressible (B) Non-viscous (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)
Description : Fluid resistance to shear depends upon its (A) Rate of transfer of molecular momentum (B) Cohesion (C) Both (A) and (B) (D) Neither (A) nor (B)
Description : Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Thermal conductivity of a conducting solid material depends upon its (A) Temperature (B) Porosity (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : An ideal fluid is (A) Non-viscous (B) Incompressible (C) Both (A) & (B) (D) Neither (A) & (B
Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B
Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Joule-Thomson co-efficient depends on the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : In an incompressible fluid, the density is (A) Greatly affected by moderate changes in pressure (B) Greatly affected only by moderate changes in temperature (C) Not affected with moderate change in temperature & pressure (D) Sensible to changes in both temperature & pressure
Last Answer : (C) Not affected with moderate change in temperature & pressure
Description : The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (B) Temperature
Description : The internal energy of a gas obeying P (V - b) RT (where, b is a positive constant and has a constant Cv ), depends upon its (A) Pressure (B) Volume (C) Temperature (D) All (A), (B) & (C)
Last Answer : (C) Temperature
Description : Internal energy of a gas obeying Van-Der-Waals equation of state, [p + (a/v2)] (V - b) = RT, depends upon its (A) Pressure & temperature (B) Pressure & specific volume (C) Temperature & specific volume (D) Temperature only
Last Answer : (A) Pressure & temperature
Description : In an incompressible flow of fluid, the fluid (A) Temperature remains constant (B) Compressibility is greater than zero (C) Density does not change with pressure & temperature (D) Is frictionless
Last Answer : (C) Density does not change with pressure & temperature
Description : The main factor on which the behaviour of a mass of fluidised solid depends mainly is the (A) Fluid characteristics (B) Particle size (C) Both (A) and (B) (D) Neither (A) nor (B)
Description : Economy of a multiple effect evaporator depends upon the (A) Heat balance consideration (B) Rate of heat transfer (C) Both (A) and (B) (D) Neither (A) nor (B
Last Answer : (A) Heat balance consideration
Description : Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)
Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)
Description : For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption. (A) Physical (B) Chemical (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (B) Chemical
Description : The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : The co-efficient of drag and lift for an incompressible fluid depends on the (A) Reynolds number (B) Froude number (C) Mach number (D) All (A), (B) and (C)
Last Answer : (A) Reynolds numbe
Description : Quality of transmission depends upon (1) Nature of signal only (2) Nature of medium only (3) Both (1) and (2) (4) Neither A nor B
Last Answer : (3) Both (1) and (2) Explanation: Quality of transmission is governed both by nature of signal and nature of communication channel/medium.
Description : The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)
Last Answer : c. Both (a) and (b)
Description : For an ideal gas, the internal energy depends upon its __________ only. (A) Molecular size (B) Temperature (C) Volume (D) Pressure
Description : Efficiency of a heat engine working on Carnot cycle between two temperature levels depends upon the (A) Two temperatures only (B) Pressure of working fluid (C) Mass of the working fluid (D) Mass and pressure both of the working fluid
Last Answer : (A) Two temperatures only
Description : For a constant volume process __________ by the system is used only to increase the internal energy. (A) Heat absorbed (B) Work done (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (B) Work done
Description : The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above
Last Answer : Answer: Option D
Description : The rate of shear versus the shear stress curves are time dependent for __________ fluid. (A) Thixotropic (B) Rheopectic (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Mass velocity in case of steady flow and through a constant crosssection conduit is independent of the (A) Temperature (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Minimum fluidisation velocity for a specific system depends upon the (A) Particle size (B) Fluid viscosity (C) Density of both the particle & the fluid (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Bernoulli's principle states that, for streamline motion of an incompressible non-viscous fluid: A. the pressure at any part + the kinetic energy per unit volume = constant B. the kinetic ... + the kinetic energy per unit volume + the potential energy per unit volume = constant
Last Answer : the pressure at any part + the kinetic energy per unit volume + the potential energy per unit volume = constant
Description : Bernoulli's equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli's equation? A. Fluid flow is frictionless & irrotational. B. Fluid flow is ... A, C, D (B) B, D, E (C) A, B, E (D) A, D, E
Last Answer : (C) A, B, E
Description : An ideal fluid is (A) Frictionless & incompressible (B) One, which obeys Newton's law of viscosity (C) Highly viscous (D) None of these
Last Answer : (A) Frictionless & incompressible
Description : The normal stress is the same in all directions at a point in a fluid, only when the fluid (A) Is at rest & has zero viscosity (B) Is frictionless (C) Fluid layer has no motion relative to an adjacent layer of fluid (D) is incompressible & frictionless
Last Answer : (D) is incompressible & frictionless
Description : In a fully turbulent flow (Re > 10 5 ) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is (A) d (B) d 2 (C) d 2.5 (D) d
Last Answer : (C) d 2.5
Description : For turbulent flow of an incompressible fluid through a pipe, the flow rate ‘Q’ is proportional to (Δ P)n, where ΔP is the pressure drop. The value of exponent 'n' is (A) 1 (B) 0 (C) < 1 (D) > 1
Last Answer : (C) < 1
Description : In deriving Bernoulli's equation, fluid is assumed to be (A) Incompressible, frictionless, steady, along a streamline (B) Uniform, steady, incompressible, along a streamline (C) Steady, density being pressure dependent, frictionless (D) None of these
Last Answer : (A) Incompressible, frictionless, steady, along a streamline
Description : With the increase in depth, the hydrostatic pressure in an un-accelerated incompressible fluid (in a constant gravitational field) (A) Decreases (B) Increases linearly (C) Increases exponentially (D) Remain constant
Last Answer : (B) Increases linearly
Description : A catalyst in a chemical reaction __________ free energy change in the reaction. (A) Increases (B) Decreases (C) Either (A) or (B); depends on the type of catalyst (D) Neither (A) nor (B)
Last Answer : (C) Either (A) or (B); depends on the type of catalyst
Description : Capacity of a rotary dryer depends on its (A) rpm (B) Inclination with ground surface (C) Both (A) and (B) (D) Neither (A) nor (B)