Description : A shaft 9 m long is subjected to a torque 30 t-m at a point 3 m distant from either end. The reactive torque at the nearer end will be (A) 5 tonnes metre (B) 10 tonnes metre (C) 15 tonnes metre (D) 20 tonnes metre
Last Answer : (D) 20 tonnes metre
Description : Which of the following types of lung cancer is the most prevalent carcinoma of the lung for both men and women? a) Adenocarcinoma Adenocarcinoma presents more peripherally as peripheral masses or ... arise primarily as proximal lesions, but may arise in any part of the tracheobronchial tree.
Last Answer : a) Adenocarcinoma Adenocarcinoma presents more peripherally as peripheral masses or nodules and often metastasizes.
Description : Which of the following types of lung cancer is characterized as fast growing and tending to arise peripherally? a) Large cell carcinoma Large cell carcinoma is a fast-growing tumor that ... cell carcinoma Squamous cell carcinoma arises from the bronchial epithelium and is more centrally located.
Last Answer : a) Large cell carcinoma Large cell carcinoma is a fast-growing tumor that tends to arise peripherally.
Description : A regional boo onal bookstore chai re chain is ab n is about to build a distribution cen ion center that is centrally located for its eight retail outlets. It will most likely employ likely ... balancing b. balancing b. load- distance analysis c. center-of-gravity model d. linear programming
Last Answer : c. center-of-gravity model
Description : In an organization that has high centralization (a) Problem can be quickly and efficiently solved (b) The corporate headquarters is located centrally to branch offices (c) Top managers make ... merely carry out directions (d) All top-level officials are located within the same geographic area
Last Answer : (c) Top managers make all the decisions-lower-level managers merely carry out directions
Description : Pick up the incorrect statement from the following: (A) In Flemish bond, headers and stretchers are laid alternately in the same course (B) In Flemish bond every header in each course lies ... laid in every course (D) In English bond, headers and stretchers are laid in alternate courses
Last Answer : Answer: Option C
Description : While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection ... drawing second rays (D) Take maximum number of sights as possible from each station to distant objects
Last Answer : (B) Draw short rays sufficient to contain the points sought
Description : One of the Lehmann's rules of plane tabling, is (A) Location of the instrument station is always distant from each of the three rays from the known points in proportion to their distances ( ... to the most distant point as the inter-section of the other two rays (D) None of these
Last Answer : (A) Location of the instrument station is always distant from each of the three rays from the known points in proportion to their distances
Description : The intensity of direct longitudinal stress in the cross-section at any point distant r from the neutral axis, is proportional to (A) r (B) 1/r (C) r2 (D) 1/r²
Last Answer : (A) r
Description : For two plates of equal thickness, full strength of square-edged fillet weld can be ensured if its maximum size is limited to (a) 1.5 mm less than the plate thickness (b) 67% of the plate thickness (c) 80% of the plate thickness (d) Thickness of the plate
Last Answer : (a) 1.5 mm less than the plate thickness
Description : If the length of a wall on either side of a lintel opening is at least half of its effective span L, the load W carried by the lintel is equivalent to the weight of brickwork contained in an equilateral triangle, producing a maximum bending moment (A) WL/2 (B) WL/4 (C) WL/6 (D) WL/8
Description : How many nos. of sleepers should be loosened either side of the proposed weld? (i) 3 sleepers (ii) 5 sleepers.* (iii) 2 sleepers (iv) 4 sleepers
Last Answer : (ii) 5 sleepers.
Description : If three forces acting in one plane upon a rigid body, keep it in equilibrium, then they must either (A) Meet in a point (B) Be all parallel (C) At least two of them must meet (D) All the above are correct
Last Answer : (D) All the above are correct
Description : A man rows to a place 48km distant and back in 14 hours. He finds that he can row 4km with the stream in the same time as 3km against the stream. Find the rate of the stream. A.2 km/hr B.1 km/hr C.3 km/hr D.3.5km/hr
Last Answer : Answer- B Basic Formula: Speed of the stream = ½ (a-b) km / hr Speed = distance traveled / time taken Explanation: Suppose he moves 4km downstream in x hours Then, downstream a= 4 / x km/hr Speed upstream b = 3/ x km/hr ... = 1/2 a=8 km/hr ,b = 6 km/hr rate of stream = ½ (8 - 6 ) = 1 km/hr
Description : A woman rows to a place 24km distant and come back in 7 hrs. She finds that she can row 2km with the stream in the same time as 1.5km against the stream. The rate of the stream is, A) 2 B) 4 C) 1 D) 3
Last Answer : ANSWER: C Explanation: Suppose she move 2km downstream in x hrs Then, speed of downstream = (2/x) km/hr Speed of upstream = (1.5/x) km/hr Therefore 24/(2/x) + 24/(1.5/x) = 7 12x + 16x = 7 ... of downstream = 8km/hr and upstream = 6km/hr Rate of the stream = ½ (8 - 6 )km/hr = 1 km/hr
Description : At either end of a plane frame, maximum number of possible transverse shear forces, are (A) One (B) Two (C) Three (D) Four
Last Answer : (A) One
Description : The maximum deflection of (A) A simply supported beam carrying a uniformly increasing load from either end and having the apex at the mid span is WL3 /60EI (B) A fixed ended beam ... ended beam carrying a concentrated load at the mid span is WL3 /192EI (D) All the above
Last Answer : (D) All the above
Description : At either end of a plane frame, maximum number of possible bending moments, are (A) Zero (B) One (C) Two (D) Three
Last Answer : (A) Zero
Description : A pile of length carrying a uniformly distributed load per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be (A) WL²/15 (B) WL²/30 (C) WL²/60 (D) WL²/90
Last Answer : Answer: Option D
Description : If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm (C) 150 cm (D) 200 cm
Description : If L is the effective span of a R.C.C. beam which is subjected to maximum shear qmax at the ends, the distance from either end over which stirrups for the shear, are provided, is (A) (L/2) (1 - 3/qmax) (B) (L/3) (1 - 5/qmax) (C) (L/2) (1 - 5/qmax) (D) (L/2) (1 - 2/qmax)
Description : A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P
Description : If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m
Last Answer : Answer: Option B
Description : Why might a centrally planned economy begin encouraging some free enterprise?
Last Answer : Feel Free to Answer
Description : A horizontal antenna is _____. A. vertically polarized B. horizontally polarized C. centrally polarized D. circularly polarized
Last Answer : B. horizontally polarized
Description : A horizontal antenna is A. centrally polarized B. vertically polarized C. horizontally polarized D. perpendicularly polarized
Last Answer : C. horizontally polarized
Description : The cornea: a. is thicker centrally than peripherally b. contains 10,000 endothelium cells per square mm at birth c.has an acellular collagenous stroma d. contain Descemet's membrane is produced by the endothelium e. has a refractive index of 1.38
Last Answer : contain Descemet's membrane is produced by the endothelium
Description : A company wants to manage job scheduling centrally and has the requirements toexecute job chains across different SAP systems. Which batch scheduling tool do you recommend? A. SAP Central Process ... Process Scheduling (full version) D. The Job Management work center in SAP Solution Manager
Last Answer : C. SAP Central Process Scheduling (full version)
Description : The danger level should be marked with a bright red band …… wide centrally over a white band …… wide for a length of……… a) 5 cm, 10 cm, 60 cms* b) 10 cm, 20 cm, 60 cm c) 15 cm, 30 mm, 60 cm d) None of the above
Last Answer : a) 5 cm, 10 cm, 60 cms*
Description : The following is true of loperamide except: A. It is absorbed from intestines and exerts centrally mediated antidiarrhoeal action B. It acts on the opioid receptors in the gut C. It increases ... of the intestines D. It inhibits intestinal secretion by binding to calmodulin in the mucosal cells
Last Answer : A. It is absorbed from intestines and exerts centrally mediated antidiarrhoeal action
Description : Indications of centrally acting muscle relaxants include all of the following except: A. Balanced anaesthesia B. Traumatic muscle spasms C. Torticollis D. Electroconvulsive therapy
Last Answer : A. Balanced anaesthesia
Description : Which of the following is a centrally acting skeletal muscle relaxant: A. Carisoprodol B. Dantrolene sodium C. Quinine D. Decamethonium
Last Answer : A. Carisoprodol
Description : Centchroman is: A. An oral contraceptive for women B. An oral contraceptive for men C. A mast cell stabilizer D. A centrally acting muscle relaxant
Last Answer : A. An oral contraceptive for women
Description : ___________ antihypertensive therapy should be avoided in type-1 diabetes mellitus a) ACE inhibitors b) High dose diuretics c) Centrally acting d) calcium channel blockers
Last Answer : c) Centrally acting
Description : Billy and Sally set out on a journey to visit a famous castle, but they both forgot to bring any food, water, or money with them. At the onset of their trip, they saw a beautiful rainbow ... eatery, and had tuna fish sandwiches for lunch. Where in the world was this famous castle located? -Riddles
Last Answer : Billy and Sally were children, playing a game of Candy Land.
Description : Illegal purchase or bid for property offered for sale by authority of public servant shall be punished with imprisonment of either description for a term which may extend to ____, or with fine which may extend ... six hundred b) One month, five hundred c) One month, two hundred d) None of these
Last Answer : c) One month, two hundred
Description : Whoever intentionally obstructs any sale of property offered for sale by the lawful authority of any public servant, as such, shall be punished with imprisonment of either description for a term which may extend ... hundred b) One month, five hundred c) Six month, one thousand d) None of these
Last Answer : b) One month, five hundred
Description : The tangent to the liquid surface in a level tube, is parallel to the axis of the level tube at (A) Every point of the bubble (B) Either end of the bubble (C) The mid-point of the bubble (D) No where
Last Answer : (C) The mid-point of the bubble
Description : Transition curves are introduced at either end of a circular curve, to obtain (A) Gradually decrease of curvature from zero at the tangent point to the specified quantity at the junction of the ... specified amount at the junction of the transition curve with main curve (D) None of these
Last Answer : (B) Gradual increase of super-elevation from zero at the tangent point to the specified amount at the junction of the transition curve with main curve
Description : The timber having maximum resistance against white ants, is obtained from (A) Chir (B) Shishum (C) Sal (D) Teak
Description : Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase
Last Answer : a) A reduced resistance to corrosion
Description : A pilot can improve the probability of detecting other aircrafts by: a. Minimizing the duration of eye rests and making as many eye movements as possible b. Moving the head frequently to ... lookout ahead of the aircraft and relying on peripheral vision to detect any movement from the side
Last Answer : a. Minimizing the duration of eye rests and making as many eye movements as possible
Description : A pilot can improve the probability of detecting other aircrafts by: a. Minimizing the duration of eye rests and making as many eye movements as possible b. Moving the head frequently to ... a lookout ahead of the aircraft and relying on peripheral vision to detect any movement from the side
Description : For locating a distant object visible from two transit stations, the method usually preferred to, is (A) Angles and distances from transit stations (B) Angles from two transit stations ... from two transit stations (D) Angle from one transit station and distance from the other
Last Answer : (B) Angles from two transit stations
Description : The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called (A) Balanced section B) Economic section (C) Critical section (D) All the above
Description : The section of a reinforced beam where most distant concrete fiber in compression and tension in steel attains permissible stresses simultaneously is called (i)Balanced section (ii)Economic section (iii)Critical section [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii
Last Answer : [ D ] i, ii and iii
Description : Which of the following is not a characteristic feature of yield lines? [ A ] Yield lines end at a slab boundary [ B ] Yield lines are of parabolical shape [ C ] Axes of rotation generally lie along the lines of supports [ D ] None of the above.
Last Answer : [ B ] Yield lines are of parabolical shape
Description : Development length is the length or extension that should be provided on either side from the [ A ] face of the support [ B ] point of maximum tension [ C ] point of maximum compression [ D ] point of minimum compression
Last Answer : [ B ] point of maximum tension
Description : Ratings for welding neck flanges under ASME B16.5 are based upon which of the following? a) The flange thickness and 40,000 psi yield strength. b) The hub thickness at the welding end and ... psi yield strength. c) The weld metal yield strength. d) The piping wall thickness and yield strength.
Last Answer : b) The hub thickness at the welding end and 40,000 psi yield strength