The type of butt joints in common use, is: (A) Single inverted V-butt joint (B) Double V-butt joint (C) Double U-butt joint (D) Single V-butt joint

The type of butt joints in common use, is:
(A) Single inverted V-butt joint
(B) Double V-butt joint
(C) Double U-butt joint
(D) Single V-butt joint
by

1 Answer

Answer :

(A) Single inverted V-butt joint
by

Related questions

When two plates butt together and are riveted with two cover plates with two rows of rivets, the joint is known as (A) Lap joint (B) Butt joint (C) Single riveted single cover butt joint (D) Double riveted double cover butt joint

Description : When two plates butt together and are riveted with two cover plates with two rows of rivets, the joint is known as (A) Lap joint (B) Butt joint (C) Single riveted single cover butt joint (D) Double riveted double cover butt joint

Last Answer : (D) Double riveted double cover butt joint

The type of joint commonly used at the junction of a principal rafter and tie beam in timber trusses is (A) Mortise and tenon joint (B) Oblique mortise and tenon joint (C) Butt joint (D) Mitred joint

Description : The type of joint commonly used at the junction of a principal rafter and tie beam in timber trusses is (A) Mortise and tenon joint (B) Oblique mortise and tenon joint (C) Butt joint (D) Mitred joint

Last Answer : Answer: Option B

Why are butt welded joints longitudinal joints ? i. High strength requirements ii. Low strength requirements iii. Low as well as high strength requirements iv. None

Description : Why are butt welded joints longitudinal joints ? i. High strength requirements ii. Low strength requirements iii. Low as well as high strength requirements iv. None

Last Answer : i. High strength requirements

Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year showing the cost at that time relative to a certain base year (C) Turnover ratio of a chemical plant is the ratio of gross annual sales to the fixed capital investment (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Description : Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year ... butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Last Answer : (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

. Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Description : . Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Last Answer : r: Option D

Steel pipe are (A) Suitable for withstanding high internal pressure (B) Connected by riveted or welded joints (C) Generally laid underground and no expansion joint is required (D) Likely to last 100 years under ordinary conditions

Description : Steel pipe are  (A) Suitable for withstanding high internal pressure  (B) Connected by riveted or welded joints  (C) Generally laid underground and no expansion joint is required  (D) Likely to last 100 years under ordinary conditions 

Last Answer : (D) Likely to last 100 years under ordinary conditions 

Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Description : Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Last Answer : (D) Welding takes more time than riveting

A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Description : A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Last Answer : Ans - a. clutch

By overlapping the plates, which type of welded joint is made (i) Fillet welded joint (ii) Butt welded joint (iii) Fillet-Butt welded joint (iv) None

Description : By overlapping the plates, which type of welded joint is made (i) Fillet welded joint (ii) Butt welded joint (iii) Fillet-Butt welded joint (iv) None

Last Answer : (i) Fillet welded joint

As per the Indian boiler regulation (IBR), the type of joint preferred for the circumferential joint is the __________ joint. (A) Butt (B) Lap (C) Welded (D) None of these

Description : As per the Indian boiler regulation (IBR), the type of joint preferred for the circumferential joint is the __________ joint. (A) Butt (B) Lap (C) Welded (D) None of these

Last Answer : (B) Lap

Which welded joint used in the circumferential joint of a cylindrical pressure vessel is (i) Butt joint (ii) Lap joint (iii)Screwed joint (iv) None

Description : Which welded joint used in the circumferential joint of a cylindrical pressure vessel is (i) Butt joint (ii) Lap joint (iii)Screwed joint (iv) None

Last Answer : (ii) Lap joint

Welded joint used in the longitudinal joint of a cylindrical pressure vessel is (i) Butt joint (ii) Lap joint (iii)Screwed joint (iv) None

Description : Welded joint used in the longitudinal joint of a cylindrical pressure vessel is (i) Butt joint (ii) Lap joint (iii)Screwed joint (iv) None

Last Answer : (i) Butt joint

The name of the welded joint made by placing the plates edge to edge is (i) Fillet welded joint (ii) Butt welded joint (iii) Fillet-Butt welded joint (iv) None

Description : The name of the welded joint made by placing the plates edge to edge is (i) Fillet welded joint (ii) Butt welded joint (iii) Fillet-Butt welded joint (iv) None

Last Answer : (ii) Butt welded joint

Out of the followings, which welded joint is more stronger (i) Butt joint (ii) Lap joint (iii)Screwed joint

Description : Out of the followings, which welded joint is more stronger (i) Butt joint (ii) Lap joint (iii)Screwed joint

Last Answer : (i) Butt joint

A backing ring is used inside the pipe joint when making a (a) butt weld (b) fillet weld (c) sleeve weld (d) socket weld (e) tube weld.

Description : A backing ring is used inside the pipe joint when making a (a) butt weld (b) fillet weld (c) sleeve weld (d) socket weld (e) tube weld.

Last Answer : (a) butt weld

The size of the weld in butt welded joint is equal to (a) 0.5 × Throat of weld (b) Throat of weld (c) 2 × Throat of weld (d) 2 × Throat of weld

Description : The size of the weld in butt welded joint is equal to (a) 0.5 × Throat of weld (b) Throat of weld (c) 2 × Throat of weld (d) 2 × Throat of weld

Last Answer : (b) Throat of weld

Which of the following is preferred for riveting? (A) Lap joint (B) Butt joint (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Which of the following is preferred for riveting? (A) Lap joint (B) Butt joint (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (B) Butt joint

What type of joint at hinges of a door?  1. Translatory Joints  2. Rotary Joints  3. Revaluate Joints

Description : What type of joint at hinges of a door?  1. Translatory Joints  2. Rotary Joints  3. Revaluate Joints

Last Answer : 2

When 2 or more bits in a data unit has been changed during the transmission, the error is called _____ a. random error b. burst error c. inverted error d. double error

Description : When 2 or more bits in a data unit has been changed during the transmission, the error is called _____ a. random error b. burst error c. inverted error d. double error

Last Answer : b. burst error

When 2 or more bits in a data unit has been changed during the transmission, the error is called ____________ A. random error B. burst error C. inverted error D. double error

Description : When 2 or more bits in a data unit has been changed during the transmission, the error is called ____________ A. random error B. burst error C. inverted error D. double error

Last Answer : B. burst error

What are the probable causes of joint pain at multiple joints at the same time?

Description : What are the probable causes of joint pain at multiple joints at the same time?

Last Answer : Very little information here. Uhh. Could be infection. A good case of the flu, can start with achy joints. Inactivity. Laying around can mess up your joints. There are conditions. Like DJD. ... Rheumatoid arthritis. General wear and tear. Loss of lubricant. (Glucosamine, and condroiten can help.)

I'm fairly young and just got diagnosed with degenerative joint disease (osteoarthritis) in my SI joints. Aside from taking glucosamine and chondroitin supplements, what else can I do to slow the degeneration?

Description : I'm fairly young and just got diagnosed with degenerative joint disease (osteoarthritis) in my SI joints. Aside from taking glucosamine and chondroitin supplements, what else can I do to slow the degeneration?

Last Answer : Some resources: https://www.google.com/health/ref/Osteoarthritis http://www.medicinenet.com/osteoarthritis/article.htm http://www.mayoclinic.com/health/osteoarthritis/DS00019 http://www.nlm. ... /osteoarthritis.html And you should seriously consider a second opinion, especially with a specialist.

In joints, the bones invovled are joined together with the help of cargtilages. The joint between the adjacent vertebrae in the vertebral column is of

Description : In joints, the bones invovled are joined together with the help of cargtilages. The joint between the adjacent vertebrae in the vertebral column is of

Last Answer : In joints, the bones invovled are joined together with the help of cargtilages. The joint between ... pattern and it permits limited movements, is-

Assertion : Maximum movement is possible at the amphiarthrosis joint. Reason : Such joint are also called synovial joints and have almost frictionless

Description : Assertion : Maximum movement is possible at the amphiarthrosis joint. Reason : Such joint are also called synovial joints and have almost frictionless

Last Answer : Assertion : Maximum movement is possible at the amphiarthrosis joint. Reason : Such joint are also ... D. If both Assertion and Reason are false.

Which of these joints is a Hinge joint? (1) Hip (2) Elbow (3) Shoulder (4) Wrist

Description : Which of these joints is a Hinge joint? (1) Hip (2) Elbow (3) Shoulder (4) Wrist

Last Answer : (2) Elbow Explanation: A hinge joint allows movement in a certain spot to take place. This joint is similar to the opening and closing of a door. Some examples of hinge joints are the ... joints allow the body parts to bend and straighten. Hip and shoulders are synovial ball and socket joints.

Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

Welded joints are a. Hinged joint b. Rigid joint c. Freely supported joint

Description : Welded joints are a. Hinged joint b. Rigid joint c. Freely supported joint

Last Answer : b. Rigid joint

Select the correct statement with respect to locomotion in humans. (a) The vertebral column has 10 thoracic vertebrae. (b) The joint between adjacent vertebrae is a fibrous joint. (c) A decreased level of progesterone causes osteoporosis in old people. (d) Accumulation of uric acid crystals in joints causes their inflammation

Description : Select the correct statement with respect to locomotion in humans. (a) The vertebral column has 10 thoracic vertebrae. (b) The joint between adjacent vertebrae is a fibrous joint. (c) A ... osteoporosis in old people. (d) Accumulation of uric acid crystals in joints causes their inflammation

Last Answer : (d) Accumulation of uric acid crystals in joints causes their inflammation.

The characteristic and an example of a synovial joint in humans is Characteristics Examples (a) Fluid filled synovial Joint between cavity between atlas and axis two bones (b) Lymph filled between Gliding joint two bones, limited between carpals movement (c) Fluid cartilage Knee joint between two bones, limited movements (d) Fluid filled between Skull bones two joints, provides cushion

Description : The characteristic and an example of a synovial joint in humans is Characteristics Examples (a) Fluid filled synovial Joint between cavity between atlas and axis two bones (b) Lymph filled ... between two bones, limited movements (d) Fluid filled between Skull bones two joints, provides cushion

Last Answer : (a) Fluid filled synovial Joint between cavity between atlas and axis two bones

Which of the following joints would allow no movements? (a) Synovial joint (b) Ball and socket joint (c) Fibrous joint (d) Cartilaginous joint

Description : Which of the following joints would allow no movements? (a) Synovial joint (b) Ball and socket joint (c) Fibrous joint (d) Cartilaginous joint

Last Answer : (c) Fibrous joint

Match the following joints with the bones involved: (1) Gliding joint (i) Between carpal and metacarpal of thumb (2) Hinge joint (ii) Between atlas and axis (3) Pivot joint (iii) Between the carpals (4) Saddle joint (iv) Between humerus and ulna. Select the correct option from the following: (a) (1)-(iii), (2)-(iv), (3)-(ii), (4)-(i) (b) (1)-(iv), (2)-(i), (3)-(ii), (4)-(iii) (c) (1)-(iv), (2)-(ii), (3)-(iii), (4)-(i) (d) (1)-(i), (2)-(iii), (3)-(ii), (4)-(iv)

Description : Match the following joints with the bones involved: (1) Gliding joint (i) Between carpal and metacarpal of thumb (2) Hinge joint (ii) Between atlas and axis (3) Pivot joint (iii) Between the carpals (4) Saddle joint (iv) Between humerus and ... ), (4)-(i) (d) (1)-(i), (2)-(iii), (3)-(ii), (4)-(iv)

Last Answer : (a) (1)-(iii), (2)-(iv), (3)-(ii), (4)-(i)

in multimode fibers, how do fiber joints increase fiber attenuation following the joint?

Description : in multimode fibers, how do fiber joints increase fiber attenuation following the joint?

Last Answer : By disturbing the fiber's mode power distribution (MPD).

For joints in service in the creep range which of the following is recommended by ASME B16.5? a) Replacement of the joint after 1,000,000 hours of service. b) Periodic tightening of the bolts to prevent leakage. c) Immediate replacement is recommended if the material operates in the creep range. d) Regular flow detection inspection of the piping to fitting welds.

Description : For joints in service in the creep range which of the following is recommended by ASME B16.5? a) Replacement of the joint after 1,000,000 hours of service. b) Periodic tightening of ... the material operates in the creep range. d) Regular flow detection inspection of the piping to fitting welds.

Last Answer : b) Periodic tightening of the bolts to prevent leakage.

Effect of applied moment at a joint on the other joints is known as the a.carry in factor b. carry over factor c.carry up factor d.carry down factor

Description : Effect of applied moment at a joint on the other joints is known as the a.carry in factor b. carry over factor c.carry up factor d.carry down factor

Last Answer : b. carry over factor

Select the INCORRECT statement concerning the muscular system. a) Bones contact other bones at joints. b) Flexors decrease the angle of a joint. c) Adductors move a limb away from the midline. d) Tendons attach muscle to bone.

Description : Select the INCORRECT statement concerning the muscular system. a) Bones contact other bones at joints. b) Flexors decrease the angle of a joint. c) Adductors move a limb away from the midline. d) Tendons attach muscle to bone.

Last Answer : ANSWER: C -- ADDUCTORS MOVE A LIMB AWAY FROM THE MIDLINE. 

Which of these joints is a Hinge joint? (1) Hip (2) Elbow (3) Shoulder (4) Wrist

Description : Which of these joints is a Hinge joint? (1) Hip (2) Elbow (3) Shoulder (4) Wrist

Last Answer : Elbow

What are V and inverted V curves of synchronous motor ?

Description : What are V and inverted V curves of synchronous motor ?

Last Answer : The variation of magnitude of line current with respect to the field current is called V curve . The variation of power factor with respect to the field current is called inverted V curve.

Draw and explain V and inverted V curves for synchronous motor.

Description : Draw and explain V and inverted V curves for synchronous motor.

Last Answer : V curves' and inverted V curves' for Synchronous Motor:  V curve:  V curve is a plot of the stator current versus field current for different constant loads. The graph is plotted ... Vcurves of synchronous motor. The highest point on each of these curves indicates unity power factor.

Which of the following is an inverted `U' shaped curve? (1) Average cost (2) Marginal cost (3) Total cost (4) Fixed cost

Description : Which of the following is an inverted `U' shaped curve? (1) Average cost (2) Marginal cost (3) Total cost (4) Fixed cost

Last Answer : (1) Average cost Explanation: In economics, a cost curve is a graph of the costs of production as a function of total quantity produced. Both the Short-run average total cost curve (SRAC) and Long ... typically expressed as U-shaped. However, the shapes of the curves are not due to the same factors.

Which of the following is an inverted ‘U’ shaped curve ? (1) Average cost (2) Marginal cost (3) Total cost (4) Fixed cost

Description : Which of the following is an inverted ‘U’ shaped curve ? (1) Average cost (2) Marginal cost (3) Total cost (4) Fixed cost

Last Answer : Average cost

"W = double U". Why U and not V?

Description : "W = double U". Why U and not V?

Last Answer : Because when the letter was written, both upper and lower case, it was round, not pointy. http://www.grundschulmaterial.de/inhalte/de/Klasse14/Deutsch/Klasse%201/Schreiblehrg%C3%A4nge/Nachspurbilder/Schreibschrift%20LAS/PRV-LAS-W-gr-19171.jpg

Why Double U instead of W Double V ?

Description : V not U

Last Answer : : The name of the letter does not depend on the shape. The name of the letter depends on the pronunciation. W is pronounced like two U 's like new .

A pressure conduit carrying water beneath a stream or a canal, is known as (A) Sag (B) Depressed pipe (C) Inverted syphon (D) All the above

Description : A pressure conduit carrying water beneath a stream or a canal, is known as  (A) Sag  (B) Depressed pipe  (C) Inverted syphon  (D) All the above 

Last Answer : (D) All the above 

A back sight (A) Is always taken on a point of known elevation or can be computed (B) Is added to the known level to obtain the instrument height (C) Taken on an inverted staff is treated as negative (D) All the above

Description : A back sight  (A) Is always taken on a point of known elevation or can be computed  (B) Is added to the known level to obtain the instrument height  (C) Taken on an inverted staff is treated as negative  (D) All the above 

Last Answer : (D) All the above 

The reduced level of a floor is 99.995 m, the staff reading on the floor is 1.505 m. If the inverted staff reading against the roof is 1.795 m, the floor level below the slab, is (A) 3.290 m (B) 3.300 m (C) 3.275 m (D) 2.790 m

Description : The reduced level of a floor is 99.995 m, the staff reading on the floor is 1.505 m. If the inverted staff reading against the roof is 1.795 m, the floor level below the slab, is (A) 3.290 m (B) 3.300 m (C) 3.275 m (D) 2.790 m

Last Answer : (B) 3.300 m