Solvent extracted oil (A) Has low free fatty acid content (B) Is odourless (C) Has more of unsaturates (D) None of these

Solvent extracted oil
(A) Has low free fatty acid content
(B) Is odourless
(C) Has more of unsaturates
(D) None of these
by

1 Answer

Answer :

(D) None of these
by

Related questions

Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

Saponification value/number of an oil or fat is a measure of its (A) Fatty acid content (B) Degree of unsaturation of the fatty acids present in it (C) Average molecular weight (D) Insoluble fatty acid content

Description : Saponification value/number of an oil or fat is a measure of its (A) Fatty acid content (B) Degree of unsaturation of the fatty acids present in it (C) Average molecular weight (D) Insoluble fatty acid content

Last Answer : (C) Average molecular weight

Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam

Description : Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam

Last Answer : (D) Steam

Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes(B) Increases with the increasing flake size keeping the flake thicknessconstant(C) Increases considerably with the rise of temperature(D) Decreases as the moisture content of flakes increases

Description : Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes (B) Increases with the increasing flake size ... considerably with the rise of temperature (D) Decreases as the moisture content of flakes increases

Last Answer : (D) Decreases as the moisture content of flakes increases

Which of the following is not a feature of potable water? a) It must be clean, colourless and odourless. b) It must be free from bacteria c) It must have excessive sodium ,calcium and magnesium d) It must contain dissolved oxygen and carbon dioxide

Description : Which of the following is not a feature of potable water? a) It must be clean, colourless and odourless. b) It must be free from bacteria c) It must have excessive sodium ,calcium and magnesium d) It must contain dissolved oxygen and carbon dioxide

Last Answer : c) It must have excessive sodium ,calcium and magnesium

Pick out the correct statement. (A) A fat is converted into oil by its hydrogenation (B) There is no difference between a fat and an oil so far as its physical properties are concerned (C) All vegetable oils except coconut oil, contains fatty acids having more than sixteen carbon atoms (D) Vegetable oils are classified as drying, non-drying and semi drying oils depending upon their fatty acids content

Description : Pick out the correct statement. (A) A fat is converted into oil by its hydrogenation (B) There is no difference between a fat and an oil so far as its physical properties are ... Vegetable oils are classified as drying, non-drying and semi drying oils depending upon their fatty acids content

Last Answer : (C) All vegetable oils except coconut oil, contains fatty acids having more than sixteen carbon atoms

__________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Description : __________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Last Answer : (B) Solvent extraction

285. Sucrose content in the raw juice extracted from sugar cane is about __________ percent(A) 1 - 2 (B) 15 - 20 (C) 50 - 60 (D) 80 - 85

Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85

Last Answer : (B) 15 - 20

Saponification number is (A) mg of KOH required to saponify one gm of fat or oil (B) mg of KOH required to neutralize free fatty acids of one gms of fat (C) mg of KOH required to neutralize the acetic acid obtained by saponification of one gm of fat after it has been acetylated (D) None of these

Description : Saponification number is (A) mg of KOH required to saponify one gm of fat or oil (B) mg of KOH required to neutralize free fatty acids of one gms of fat (C) mg of KOH required to neutralize the acetic acid obtained by saponification of one gm of fat after it has been acetylated (D) None of these

Last Answer : Answer : C

What are the List of odourless objects?

Description : What are the List of odourless objects?

Last Answer : water

One property of ammonia is – (1) It is insoluble in water (2) it is a odourless gas (3) It is a yellowish gas (4) Its aqueous solution turns red litmus blue

Description : One property of ammonia is – (1) It is insoluble in water (2) it is a odourless gas (3) It is a yellowish gas (4) Its aqueous solution turns red litmus blue

Last Answer : (4) Its aqueous solution turns red litmus blue Explanation: The main use of litmus is to test whether a solution is acidic or basic. For instance, ammonia gas, which is alkaline, colours the red litmus paper blue.

All noble gases are - (1) Colourless (2) Odourless (3) Colourless and Odourless (4) Light blue

Description : All noble gases are - (1) Colourless (2) Odourless (3) Colourless and Odourless (4) Light blue

Last Answer : (3) Colourless and Odourless Explanation: Other characteristics of the noble gases are that they all conduct electricity, fluoresce, are odorless and colorless, and are used in many conditions when a stable element is needed to maintain a safe and constant environment.

The plastics prepared from Vinyl resin are (A) Odourless (B) Non-toxic (C) Transparent (D) All of these

Description : The plastics prepared from Vinyl resin are (A) Odourless (B) Non-toxic (C) Transparent (D) All of these

Last Answer : civil-engineering

Which of the following is NOT a characteristic of Sugar of milk Options: 1) It is odourless 2) It is milky white 3) It is soluble in alcohol 4) It is an important solid vehicle

Description : Which of the following is NOT a characteristic of Sugar of milk Options: 1) It is odourless 2) It is milky white 3) It is soluble in alcohol 4) It is an important solid vehicle

Last Answer : Correct Answer: 3) It is soluble in alcohol

“Your sweat is naturally odourless; it’s the bacteria found on the skin that make it smell.”

Description : “Your sweat is naturally odourless; it’s the bacteria found on the skin that make it smell.”

Last Answer : Body odour mainly originates from the apocrine glands in the armpits, which release an oily sweat rich in proteins and lipids which bacteria on the skin feed on. The warm, damp conditions of the armpit are also a perfect environment for bacteria to thrive in and create that smell we call body odour.

One property of ammonia is (1) It is insoluble in water (2) It is a odourless gas (3) It is a yellowish gas (4) Its aqueous solution turns red litmus blue

Description : One property of ammonia is (1) It is insoluble in water (2) It is a odourless gas (3) It is a yellowish gas (4) Its aqueous solution turns red litmus blue

Last Answer :  Its aqueous solution turns red litmus blue

…….. is the meaningful content that is extracted from the data after processing. -Technology

Description : …….. is the meaningful content that is extracted from the data after processing. -Technology

Last Answer : Information is the meaningful content that is extracted from the data after processing.

Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the flooding velocity, generally (C) 'Elution' means the desorption of the adsorbed solute by a solvent (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

'Hinterland' refers to: (a) continental shelf in the sea from which oil can be extracted (b) natural harbour used for international trade (c) land region extending from a sea port (d) abandoned sea port where trade was carried out initially

Description : 'Hinterland' refers to: (a) continental shelf in the sea from which oil can be extracted (b) natural harbour used for international trade (c) land region extending from a sea port (d) abandoned sea port where trade was carried out initially

Last Answer : Ans: (c)

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Description : Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

. __________ is not an important refinery process for upgrading the quality of lubricating oil.(A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment

Description : . __________ is not an important refinery process for upgrading the quality of lubricating oil. (A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment

Last Answer : (A) Deoiling

Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which of the following is the most commonly used leaching solvent in vegetable oil industry? (A) Phenol (B) Hexane

Description : Which of the following is the most commonly used leaching solvent in vegetable oil industry? (A) Phenol (B) Hexane

Last Answer : (B) Hexane

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Description : Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Last Answer : (A) Hexane

Palmitic, oleic or stearic acid ester of cholesterol used in manufacture of cosmetic creams is (A) Elaidic oil (B) Lanoline (C) Spermaceti (D) Chaulmoogric oil FATS AND FATTY ACID METABOLISM 75

Description : Palmitic, oleic or stearic acid ester of cholesterol used in manufacture of cosmetic creams is (A) Elaidic oil (B) Lanoline (C) Spermaceti (D) Chaulmoogric oil FATS AND FATTY ACID METABOLISM 75

Last Answer : Answer : B

Unsaturated fatty acid found in the cod liver oil and containing 5 double bonds is (A) Clupanodonic acid (B) Cervonic acid (C) Elaidic acid (D) Timnodonic acid

Description : Unsaturated fatty acid found in the cod liver oil and containing 5 double bonds is (A) Clupanodonic acid (B) Cervonic acid (C) Elaidic acid (D) Timnodonic acid

Last Answer : Answer : D

Spoilage of oil can be detected by which fatty acid? (a) Oleic acid (b) Linolenic acid (c) Linoleic acid (d) Erucic acid.

Description : Spoilage of oil can be detected by which fatty acid? (a) Oleic acid (b) Linolenic acid (c) Linoleic acid (d) Erucic acid.

Last Answer : (d) Erucic acid.

Which of the following terms best describes the compound below? CH3(CH2)12CO2H (a) a fatty acid (b) an oil (c) a wax (d) a soap

Description : Which of the following terms best describes the compound below? CH3(CH2)12CO2H (a) a fatty acid (b) an oil (c) a wax (d) a soap

Last Answer : a fatty acid

LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%(D) All (A), (B) and (C))

Description : LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Lipids have the following properties: (A) Insoluble in water and soluble in fat solvent (B) High energy content (C) Structural component of cell membrane (D) All of these

Description : Lipids have the following properties: (A) Insoluble in water and soluble in fat solvent (B) High energy content (C) Structural component of cell membrane (D) All of these

Last Answer : Answer : D

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Shaving soaps are (A) Soft potassium soaps (potassium salt of fatty acid) with free Stearic acid to give lather a lasting property (B) Metallic soaps compounded with frothing agents (C) High free alkali soaps having excess of cane sugar and alcohol (D) None of these

Description : Shaving soaps are (A) Soft potassium soaps (potassium salt of fatty acid) with free Stearic acid to give lather a lasting property (B) Metallic soaps compounded with frothing agents (C) High free alkali soaps having excess of cane sugar and alcohol (D) None of these

Last Answer : (A) Soft potassium soaps (potassium salt of fatty acid) with free Stearic acid to give lather a lasting property

Honey extracted from almond flower is inedible due to: a. Amygdalus factor b. Oxalic acid c. a & b d. None

Description : Honey extracted from almond flower is inedible due to: a. Amygdalus factor b. Oxalic acid c. a & b d. None

Last Answer : Amygdalus factor

Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Description : Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Last Answer : Answer: Option D

Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Description : Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Last Answer : (B) Forms a low boiling azeotrope

Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Description : Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Last Answer : (D) None of these

When the solvent dissolves very little of solute, then (A) Solvent of low latent heat of vaporisation should be used (B) Solvent of low freezing point should be used (C) Large quantity of solvent is required to extract the solute (D) Very small quantity of solvent is required

Description : When the solvent dissolves very little of solute, then (A) Solvent of low latent heat of vaporisation should be used (B) Solvent of low freezing point should be used (C) Large quantity of solvent is required to extract the solute (D) Very small quantity of solvent is required

Last Answer : (C) Large quantity of solvent is required to extract the solute

Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Description : Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Last Answer : (B) Employs two solvents

In liquid extraction, if the selectivity is unity, then (A) Separation of the constituents is the most effective (B) No separation will occur (C) Amount of solvent required will be minimum (D) Solvent flow rate should be very low

Description : In liquid extraction, if the selectivity is unity, then (A) Separation of the constituents is the most effective (B) No separation will occur (C) Amount of solvent required will be minimum (D) Solvent flow rate should be very low

Last Answer : (B) No separation will occur

Most commonly used solvent in oil paints, is (A) Petroleum (B) Spirit (C) Coal tar (D) Turpentine

Description : Most commonly used solvent in oil paints, is (A) Petroleum (B) Spirit (C) Coal tar (D) Turpentine

Last Answer : Answer: Option A

Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Description : Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Last Answer : (B) Adsorption on bog iron bed

Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Description : Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Last Answer : (A) Solvent extraction

The function of skimming tank in sewage treatment is to remove __________ substances. (A) Dissolved solid (B) Suspended solid (C) Oil & fatty (D) Gritty & inorganic

Description : The function of skimming tank in sewage treatment is to remove __________ substances. (A) Dissolved solid (B) Suspended solid (C) Oil & fatty (D) Gritty & inorganic

Last Answer : (C) Oil & fatty

Oil is a/an (A) Mixture of glycerides (B) Mixture of glycerides of fatty acids (C) Solid at normal temperature (D) Ester of alcohols other than glycerine

Description : Oil is a/an (A) Mixture of glycerides (B) Mixture of glycerides of fatty acids (C) Solid at normal temperature (D) Ester of alcohols other than glycerine

Last Answer : (B) Mixture of glycerides of fatty acids