Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Question

Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Deoiling is the process of removal of oil from wax. It is done by the
__________ process.
(A) Solvent extraction
(B) Sweating
(C) Resettling
(D) All (A), (B) & (C)

asked Dec 17, 2021 by prathmesh

1 Answer

Related questions

Deoiling of wax is done by its (A) Heating (B) Cooling (C) Solvent extraction (D) Both (B) & (C

Description : Deoiling of wax is done by its (A) Heating (B) Cooling (C) Solvent extraction (D) Both (B) & (C

Last Answer : (D) Both (B) & (C

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

. __________ is not an important refinery process for upgrading the quality of lubricating oil.(A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment

Description : . __________ is not an important refinery process for upgrading the quality of lubricating oil. (A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment

Last Answer : (A) Deoiling

An upper limit of oil content is limited to about __________ percent for achieving efficient and satisfactory level of wax sweating. (A) 5 (B) 15 (C) 40 (D) 60

Description : An upper limit of oil content is limited to about __________ percent for achieving efficient and satisfactory level of wax sweating. (A) 5 (B) 15 (C) 40 (D) 60

Last Answer : (C) 40

__________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Description : __________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Last Answer : (B) Solvent extraction

Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Description : Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Last Answer : (C) Aqueous solution (10% water) of diethylene glycol

Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Description : Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Last Answer : (B) Lubricating oils

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes(B) Increases with the increasing flake size keeping the flake thicknessconstant(C) Increases considerably with the rise of temperature(D) Decreases as the moisture content of flakes increases

Description : Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes (B) Increases with the increasing flake size ... considerably with the rise of temperature (D) Decreases as the moisture content of flakes increases

Last Answer : (D) Decreases as the moisture content of flakes increases

Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Description : Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Last Answer : (A) Hexane

Separation of the isotopes of helium for scientific investigations is done by (A) Reverse osmosis (B) Thermal diffusion (C) Leaching (D) Solvent extraction

Description : Separation of the isotopes of helium for scientific investigations is done by (A) Reverse osmosis (B) Thermal diffusion (C) Leaching (D) Solvent extraction

Last Answer : (B) Thermal diffusion

The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Description : The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) ... contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available (B) One of the liquid components is heat sensitive (C) Viscosity of liquid components is very high (D) One of the liquid components has very high affinity towards the solvent

Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent

Last Answer : (D) One of the liquid components has very high affinity towards the solvent

Perforated plate towers are unique for solvent extraction because, they provide (A) Higher contact area (B) Better contact of the phase (C) Repeated coalescence & redispersion of the drop phase (D) None of these

Description : Perforated plate towers are unique for solvent extraction because, they provide (A) Higher contact area (B) Better contact of the phase (C) Repeated coalescence & redispersion of the drop phase (D) None of these

Last Answer : (C) Repeated coalescence & redispersion of the drop phase

In a liquid-liquid extraction, 10 kg of a solution containing 2 kg of solute C and 8 kg of solvent A is brought into contact with 10 kg of solvent B. Solvent A and B are completely immiscible in each other whereas solute C is soluble in both the solvents. The extraction process attains equilibrium.The equilibrium relationship between the two phases is Y* = 0.9X, where Y* is the kg of C/kg of B and X is kg of C/kg of A. Choose the correct answer. (A) The entire amount of C is transferred to solvent B (B) Less than 2 kg but more than 1 kg of C is transferred to solvent B (C) Less than 1 kg of C is transferred to B (D) No amount of C is transferred to B

Description : In a liquid-liquid extraction, 10 kg of a solution containing 2 kg of solute C and 8 kg of solvent A is brought into contact with 10 kg of solvent B. Solvent A and B are completely immiscible in each other whereas ... (C) Less than 1 kg of C is transferred to B (D) No amount of C is transferred to B

Last Answer : (A) The entire amount of C is transferred to solvent B

Degree of freedom for leaching and solvent extraction process is (A) 0 (B) 1 (C) 2 (D) 3

Description : Degree of freedom for leaching and solvent extraction process is (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (D) 3

In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate phase R containing A at xB = 0.5 and xR = 0.05 respectively. The total mass of the extract phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25

Description : In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate ... phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25

Last Answer : (B) 8.89

Sweetening of petroleum product means the removal of (A) Sulphur & its compounds (B) Water (C) Organic impurities (D) Wax

Description : Sweetening of petroleum product means the removal of (A) Sulphur & its compounds (B) Water (C) Organic impurities (D) Wax

Last Answer : (A) Sulphur & its compounds

Disaster management is aimed ata. Resettling people in the closest unaffected urban area b. Collection of valuable data for future management objectives c. Strengthening sewage and drinking water treatment facilities to resist the impact of a future disaster d. Restoring a communitys services, facilities and residences to pre-disaster levels

Description : Disaster management is aimed ata. Resettling people in the closest unaffected urban area a. Resettling people in the closest unaffected urban area b. Collection of valuable data for future ... a future disaster d. Restoring a communitys services, facilities and residences to pre-disaster levels

Last Answer : d. Restoring a communitys services, facilities and residences to pre-disaster levels

Removal of air from the pipeline is termed as ____________ in injection system. a) bleeding b) wound c) sweating d) none of the mentioned

Description : Removal of air from the pipeline is termed as ____________ in injection system. a) bleeding b) wound c) sweating d) none of the mentioned

Last Answer : Answer: a Explanation: Generally, the removal of air from the pipeline is termed as bleeding in injection system.

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used in solvent extraction decreases (C) The selectivity of solvent used in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used ... in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Selectivity of the solvent used in solvent extraction should be (A) 1 (B) > 1 (C) < 1 (D) 0

Description : Selectivity of the solvent used in solvent extraction should be (A) 1 (B) > 1 (C) < 1 (D) 0

Last Answer : (B) > 1

In which of the following unit operations, the selectivity is an important parameter? (A) Distillation (B) Solvent extraction (C) Absorption (D) None of these

Description : In which of the following unit operations, the selectivity is an important parameter? (A) Distillation (B) Solvent extraction (C) Absorption (D) None of these

Last Answer : (B) Solvent extraction

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m2 and the solvent flow, rate is 400 moles of S/m2 . hr. The equilibrium data is represented by Y = 3X2 , where Y is in moles of a A/moles of B and X is in moles A/moles of S. The maximum percentage extraction achieved in the unit is (A) 25% (B) 50% (C) 70% (D) 90%

Description : Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m2 and the ... extraction achieved in the unit is (A) 25% (B) 50% (C) 70% (D) 90%

Last Answer : (B) 50%

Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Description : Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Last Answer : (B) Employs two solvents

A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Description : A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Last Answer : (B) Extractive distillation

Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Description : Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Last Answer : (A) Solvent extraction

In liquid extraction, if the selectivity is unity, then (A) Separation of the constituents is the most effective (B) No separation will occur (C) Amount of solvent required will be minimum (D) Solvent flow rate should be very low

Description : In liquid extraction, if the selectivity is unity, then (A) Separation of the constituents is the most effective (B) No separation will occur (C) Amount of solvent required will be minimum (D) Solvent flow rate should be very low

Last Answer : (B) No separation will occur

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Description : The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Last Answer : (D) Carbon dioxide

Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Description : Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Last Answer : (D) Leaching

Which is the solvent of wax?

Description : Which is the solvent of wax?

Last Answer : Turpentine

Which of the following processes is not an example of adsorption applied to gaseous separations? (A) Recovery of valuable solvent vapors from dilute mixture with air and other gases (B) Dehumidification of air and gas (C) Removal of objectionable odour and impurities from industrial gases (D) Decolouration of yellow glycerine

Description : Which of the following processes is not an example of adsorption applied to gaseous separations? (A) Recovery of valuable solvent vapors from dilute mixture with air and ... Removal of objectionable odour and impurities from industrial gases (D) Decolouration of yellow glycerine

Last Answer : (D) Decolouration of yellow glycerine

Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Description : Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Last Answer : (B) Mercaptans

Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Description : Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Last Answer : (C) Wax from lube oi

Why is sodium carbonate added during solvent extraction?

Description : Why is sodium carbonate added during solvent extraction?

Last Answer : It is usually added during an extraction in order to make thesolution alkaline. Often times, this aids in the efficiency of theextraction.

Write advantages of water as solvent for extraction

Description : Write advantages of water as solvent for extraction

Last Answer : • It is cheap & easily available. • Non –toxic • Non inflammable. • It has wide solvent action

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Ear Wax Removal with Hydrogen Peroxide?

Description : Ear Wax Removal with Hydrogen Peroxide?

Last Answer : A build-up of ear wax can pose serious health problems, including infection, rupture, and even hearing loss. But did you know that common home remedies actually do more harm than good? Most people attempt ... the ear and wait until it "melts" - then it can be safety and unobtrusively wiped away.

Extraction of uranium from its ore is done using __________ methods. (A) Electrometallurgical (B) Pyrometallurgical (C) Chemical (D) Physical beneficiation

Description : Extraction of uranium from its ore is done using __________ methods. (A) Electrometallurgical (B) Pyrometallurgical (C) Chemical (D) Physical beneficiation

Last Answer : (C) Chemical

Extraction of uranium from its ore is done by __________ method. (A) Chemical (B) Pyrometallurgical (C) Physical beneficiation (D) Electrometallurgical

Description : Extraction of uranium from its ore is done by __________ method. (A) Chemical (B) Pyrometallurgical (C) Physical beneficiation (D) Electrometallurgical

Last Answer : (A) Chemical

How long does oil & wax wood sealant last when applied to exotic wood?

Description : How long does oil & wax wood sealant last when applied to exotic wood?

Last Answer : Can you provide more information on the installation? Inside, outside, Sunlight exposure, etc?

Removal of __________ exemplifies an adsorption unit operation. (A) Uranium from its ore (B) Water from petrol (C) Ammonia from coke oven gas (D) Mustard oil from mustard seed

Description : Removal of __________ exemplifies an adsorption unit operation. (A) Uranium from its ore (B) Water from petrol (C) Ammonia from coke oven gas (D) Mustard oil from mustard seed

Last Answer : (B) Water from petro

Extraction of `Ag` from sulphide ore and removal of unreacted silver bromide from phorographic plate involve complexes:

Description : Extraction of `Ag` from sulphide ore and removal of unreacted silver bromide from phorographic plate involve complexes:

Last Answer : Extraction of `Ag` from sulphide ore and removal of unreacted silver bromide from phorographic plate involve ... (3))_(2)]^(3-)` respectively

prathmesh · Answer 1 · 2021-12-17T10:58:03+0000

Answer :

(D) All (A), (B) & (C)

answered Dec 17, 2021 by prathmesh

Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Please log in or register to add a comment.

Please log in or register to answer this question.

1 Answer

Answer :

Please log in or register to add a comment.

Related questions