Raw Kerosene has a smoke point of 15 mm. After it is subjected to dearomatization by liquid SO2 extraction (Edeleanu process), its smoke point may become __________ mm. (A) 5 (B) 10 (C) 25 (D) 100

Raw Kerosene has a smoke point of 15 mm. After it is subjected to
dearomatization by liquid SO2 extraction (Edeleanu process), its smoke
point may become __________ mm.
(A) 5
(B) 10
(C) 25
(D) 100
by

1 Answer

Answer :

(C) 25
by

Related questions

Dearomatization of kerosene (by liquid sulphur dioxide extraction) is done to (A) Increase its smoke point (B) Improve its oxidation stability (C) Decrease the breathing loss (D) None of these

Description : Dearomatization of kerosene (by liquid sulphur dioxide extraction) is done to (A) Increase its smoke point (B) Improve its oxidation stability (C) Decrease the breathing loss (D) None of these

Last Answer : (B) Improve its oxidation stability

Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Description : Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Last Answer : (B) Paraffins

Smoke point of a good burning kerosene may be around __________ mm. (A) 0-5 (B) 20-25 (C) 60-75 (D) 100-120

Description : Smoke point of a good burning kerosene may be around __________ mm. (A) 0-5 (B) 20-25 (C) 60-75 (D) 100-120

Last Answer : (B) 20-25

Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Description : Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Last Answer : (C) Aromatics

Solvent used in Edeleanu process is (A) Furfural (B) Propane (C) Liquid SO2 (D) Phenol

Description : Solvent used in Edeleanu process is (A) Furfural (B) Propane (C) Liquid SO2 (D) Phenol

Last Answer : (C) Liquid SO2

Mercapsol and Unisol processes are meant for the (A) Dearomatization of kerosene (B) Removal of mercaptans (C) Dewaxing

Description : Mercapsol and Unisol processes are meant for the (A) Dearomatization of kerosene (B) Removal of mercaptans (C) Dewaxing

Last Answer : (B) Removal of mercaptan

Smoke point of kerosene is the (A) Time after which smoking starts on burning (B) Temperature at which smoking starts (C) Maximum height of flame (in mm) without causing smoking, when burnt in a standard lamp (D) None of these

Description : Smoke point of kerosene is the (A) Time after which smoking starts on burning (B) Temperature at which smoking starts (C) Maximum height of flame (in mm) without causing smoking, when burnt in a standard lamp (D) None of these

Last Answer : (B) Temperature at which smoking starts

The catalytic converter for conversion of SO2 to SO3 by contact process should have a feed with SO2 content between (A) 2-5 % (B) 7-10 % (C) 12-15 % (D) 20-25 %

Description : The catalytic converter for conversion of SO2 to SO3 by contact process should have a feed with SO2 content between (A) 2-5 % (B) 7-10 % (C) 12-15 % (D) 20-25 %

Last Answer : (B) 7-10 %

Two concentric springs with stiffness equal to 100 N/mm and 80 N/mm respectively, when subjected to load of 900N will deflect by a. 9mm b. 11.25 mm c. 5mm d. 31.5 mm

Description : Two concentric springs with stiffness equal to 100 N/mm and 80 N/mm respectively, when subjected to load of 900N will deflect by a. 9mm b. 11.25 mm c. 5mm d. 31.5 mm

Last Answer : c. 5mm

Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100

Description : Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100

Last Answer : (A) 25-80

What is the shear stress acting on the outer surface of a hollow shaft subjected to a torque of 100 Nm?(The inner and outer diameter of the shaft is 15 mm and 30 mm respectively.) a. 50.26 N/mm2 b. 40.24 N/mm2 c. 20.120 N/mm2 d. 8.74 N/mm2

Description : What is the shear stress acting on the outer surface of a hollow shaft subjected to a torque of 100 Nm?(The inner and outer diameter of the shaft is 15 mm and 30 mm respectively.) a. 50.26 N/mm2 b. 40.24 N/mm2 c. 20.120 N/mm2 d. 8.74 N/mm2

Last Answer : c. 20.120 N/mm2

Smoke point of kerosene expresses its (A) Burning characteristics (B) Luminosity characteristics (C) Aromatic content directly (D) Lamp wick wetting characteristics

Description : Smoke point of kerosene expresses its (A) Burning characteristics (B) Luminosity characteristics (C) Aromatic content directly (D) Lamp wick wetting characteristics

Last Answer : (A) Burning characteristics

Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Description : Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Last Answer : (C) Luminosity number

Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Description : Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Last Answer : (C) Petrol increases its octane number

Death may occur, when SO2 concentration in atmospheric air exceeds __________ ppm.(A) 20 (B) 100 (C) 400 (D) 200

Description : Death may occur, when SO2 concentration in atmospheric air exceeds __________ ppm. (A) 20 (B) 100 (C) 400 (D) 200

Last Answer : (C) 400

Good quality kerosene should have (A) Low smoke point (B) High smoke point (C) High aromatics content (D) Low paraffins content

Description : Good quality kerosene should have (A) Low smoke point (B) High smoke point (C) High aromatics content (D) Low paraffins content

Last Answer : (B) High smoke point

Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

How much rail ends are cleaned with Kerosene Oil and steel wire brush? (i) Minimum 100 mm both side (ii) Minimum 50 mm both side.* (iii) No need (iv) As decided by site supervisor

Description : How much rail ends are cleaned with Kerosene Oil and steel wire brush? (i) Minimum 100 mm both side (ii) Minimum 50 mm both side.* (iii) No need (iv) As decided by site supervisor

Last Answer : (ii) Minimum 50 mm both side.*

A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2 MN/mm2 and Eb = 0.1 MN/mm2 , the stresses developed are: (A) b = 10 N/mm2s = 20 N/mm2(B) b = 8 N/mm2s = 16 N/mm2(C) b = 6 N/mm2s = 12 N/mm2(D) b = 5 N/mm2s = 10 N/mm

Description : A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that  of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2  MN/mm2  and Eb = 0.1 ... 6 N/mm2 s  = 12 N/mm2 (D) b = 5 N/mm2 s  = 10 N/mm

Last Answer : (A) b = 10 N/mm2 s  = 20 N/mm

Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Description : Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Last Answer : (B) 25

Dust content in raw blast furnace gas is about __________ gm/Nm3 ; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use. (A) 15-30 (B) 1-2 (C) 70-100 (D) 150-200

Description : Dust content in raw blast furnace gas is about __________ gm/Nm3 ; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use. (A) 15-30 (B) 1-2 (C) 70-100 (D) 150-200

Last Answer : (A) 15-30

A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 Mpa. It is further subjected to a torque of 10 kNm. The maximum principal stress experienced on the shaft is closest to (a) 41Mpa (b) 82 Mpa (c) 164 Mpa (d) 204 Mpa

Description : A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 Mpa. It is further subjected to a torque of 10 kNm. The maximum principal stress experienced on the shaft is closest to (a) 41Mpa (b) 82 Mpa (c) 164 Mpa (d) 204 Mpa

Last Answer : (b) 82 Mpa

Char value of Kerosene is the amount of charred oil deposition on the wick obtained after burning it in a standard wick lamp at a standard rate for 24 hours. Char value of a good quality kerosene should be less than __________ mg/kg of kerosene. (A) 1 (B) 20 (C) 100 (D) 500

Description : Char value of Kerosene is the amount of charred oil deposition on the wick obtained after burning it in a standard wick lamp at a standard rate for 24 hours. Char value of a good quality kerosene should be less than __________ mg/kg of kerosene. (A) 1 (B) 20 (C) 100 (D) 500

Last Answer : (B) 20

Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Description : Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Last Answer : (A) 0.42 × (% distilled at 204°C)

A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Description : A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Last Answer : (B) 10

Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Description : Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Last Answer : (A) 0.2 to 0.8

A square object of 4 mm is subjected to a force of 3000 N. What is the maximum allowable shear stress acting on it? a. 250.14 mm2 b. 281.25 mm2 c. 400.32 mm2 d. 500 mm2

Description : A square object of 4 mm is subjected to a force of 3000 N. What is the maximum allowable shear stress acting on it? a. 250.14 mm2 b. 281.25 mm2 c. 400.32 mm2 d. 500 mm2

Last Answer : b. 281.25 mm2

Torque and bending moment of 100 kN.m and 200 kN.m acts on a shaft which has external diameter twice of internal diameter. What is the external diameter of the shaft which is subjected to a maximum shear stress of 90 N/mm2? a. 116.5 mm b. 233.025 mm c. 587.1 mm d. 900 mm

Description : Torque and bending moment of 100 kN.m and 200 kN.m acts on a shaft which has external diameter twice of internal diameter. What is the external diameter of the shaft which is subjected to a maximum shear stress of 90 N/mm2? a. 116.5 mm b. 233.025 mm c. 587.1 mm d. 900 mm

Last Answer : c. 587.1 mm

Whitworth compressed steel is obtained when molten steel is subjected to a pressure of (A) 5 kg/mm2 (B) 9 kg/mm2 (C) 13 kg/mm2 (D) 15 kg/mm

Description : Whitworth compressed steel is obtained when molten steel is subjected to a pressure of (A) 5 kg/mm2 (B) 9 kg/mm2 (C) 13 kg/mm2 (D) 15 kg/mm

Last Answer : Answer: Option B

The difference in the reservoir level and the lowest point of the water mains is 180 m. The expected pressure due to water hammer is 7.5 kg/cm2 in a pressure conduit of diameter 1 m. Assuming the efficiency of the riveted joints of the pipe as 0.6 and minimum cover 3 mm for corrosion, the thickness of the pipe materials, is (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : The difference in the reservoir level and the lowest point of the water mains is 180 m. The  expected pressure due to water hammer is 7.5 kg/cm2  in a pressure conduit of diameter 1 m.  Assuming the efficiency of the ... , is  (A) 10 mm  (B) 15 mm  (C) 20 mm  (D) 25 mm 

Last Answer : (C) 20 mm

Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Description : Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Last Answer : (D) Heavy fuel oil

Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100

Description : Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100

Last Answer : (C) 98

More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Description : More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Last Answer : (B) H2SO4

In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate phase R containing A at xB = 0.5 and xR = 0.05 respectively. The total mass of the extract phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25

Description : In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate ... phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25

Last Answer : (B) 8.89

A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10,000 kg, the corresponding maximum shearing stress being 30 kg/cm2 . The depth of the beam is (A) 15 cm (B) 20 cm (C) 25 cm (D) 30 cm

Description : A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10,000 kg, the corresponding maximum shearing stress being 30 kg/cm2 . The depth of the beam is (A) 15 cm (B) 20 cm (C) 25 cm (D) 30 cm

Last Answer : (C) 25 cm

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

A simply supported beam deflects by 5 mm when it is subjected to a concentrated load of 10 kN at its centre. What will be deflection in a 1/10 model of the beam if the model is subjected to a 1 kN load at its centre? (A) 5 mm (B) 0.5 mm (C) 0.05 mm (D) 0.005 mm

Description : A simply supported beam deflects by 5 mm when it is subjected to a concentrated load of 10 kN at its centre. What will be deflection in a 1/10 model of the beam if the model is subjected to a 1 kN load at its centre? (A) 5 mm (B) 0.5 mm (C) 0.05 mm (D) 0.005 mm

Last Answer : (A) 5 mm

Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Description : Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Last Answer : (A) Reduce SO2 content in

Separation of __________ employs gaseous diffusion process. (A) N2 and O2 from air (B) Isotopes of uranium (C) Isotopes of helium (D) SO2 and air

Description : Separation of __________ employs gaseous diffusion process. (A) N2 and O2 from air (B) Isotopes of uranium (C) Isotopes of helium (D) SO2 and air

Last Answer : (B) Isotopes of uranium

In the converter of the contact process for the manufacture of H2SO4 the equilibrium conversion of SO2__________ (i) __________ with increase in temperature and __________ (ii) __________ with increase in the mole ratio of SO2 to air. (A) (i) increases (ii) decreases (B) (i) decreases (ii) increases (C) (i) increases (ii) increases (D) (i) decreases (ii) decreases

Description : In the converter of the contact process for the manufacture of H2SO4 the equilibrium conversion of SO2__________ (i) __________ with increase in temperature and __________ (ii) __________ with increase in the mole ratio ... increases (C) (i) increases (ii) increases (D) (i) decreases (ii) decreases

Last Answer : (B) (i) decreases (ii) increases

In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Last Answer : (C) Catalytic homogenous

The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay(D) All (A), (B) & (C)

Description : Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Description : Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Last Answer : (A) Liquid extraction

The maximum thickness of the metal which can be welded using ultrasonic welding is __________ mm. (A) 0.5 (B) 3 (C) 10 (D) 25

Description : The maximum thickness of the metal which can be welded using ultrasonic welding is __________ mm. (A) 0.5 (B) 3 (C) 10 (D) 25

Last Answer : (B) 3

A circular pipe is subjected to maximum shear force of 60 kN. What is the diameter of the pipe if maximum allowable shear stress is 5 Mpa? a. 27.311 mm b. 75.56 mm c. 142.72 mm d. 692.10 mm

Description : A circular pipe is subjected to maximum shear force of 60 kN. What is the diameter of the pipe if maximum allowable shear stress is 5 Mpa? a. 27.311 mm b. 75.56 mm c. 142.72 mm d. 692.10 mm

Last Answer : c. 142.72 mm

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

BOD of raw municipal sewage may be in the range of about __________ mg/litre. (A) 1-2 (B) 5-10 (C) 150-300 (D) 2000-3000

Description : BOD of raw municipal sewage may be in the range of about __________ mg/litre. (A) 1-2 (B) 5-10 (C) 150-300 (D) 2000-3000

Last Answer : (C) 150-300