What are the methods of removing moisture from turbine?

What are the methods of removing moisture from turbine?
by

1 Answer

Answer :

a. External method by moisture separator and reheater, which separates the moisture and reheates the steam.

b. Internally by stainless steel mesh, which reduces moisture (water particles) to 1%.

c. By main steam reheat. 


by

Related questions

What does removing oxygen removing moisture and killing spoilage do?

Description : What does removing oxygen removing moisture and killing spoilage do?

Last Answer : What is the answer ?

With a gas turbine engine, engine anti-icing should be selected ‘ON’: a. Whenever the igniters are on b. Whenever the IOAT is +10°C or below and the air contains visible moisture c. Whenever the TOAT is +10°C or below and it is raining d. Whenever the ice detector system warning light comes on

Description : With a gas turbine engine, engine anti-icing should be selected ‘ON’: a. Whenever the igniters are on b. Whenever the IOAT is +10°C or below and the air contains visible moisture c. Whenever the TOAT is +10°C or below and it is raining d. Whenever the ice detector system warning light comes on

Last Answer : b. Whenever the IOAT is +10°C or below and the air contains visible moisture

With a gas turbine engine, engine anti-icing should be selected ‘ON’: a. Whenever the igniters are on b. Whenever the IOAT is +10°C or below and the air contains visible moisture c. Whenever the TOAT is +10°C or below and it is raining d. Whenever the ice detector system warning light comes on

Description : With a gas turbine engine, engine anti-icing should be selected ON': a. Whenever the igniters are on b. Whenever the IOAT is +10°C or below and the air contains visible moisture c. Whenever ... is +10°C or below and it is raining d. Whenever the ice detector system warning light comes on

Last Answer : b. Whenever the IOAT is +10°C or below and the air contains visible moisture

Do these methods of removing bags from under the eyes work?

Description : Do these methods of removing bags from under the eyes work?

Last Answer : Vitamin C is supposed to help, as well as Preperation H. I never heard of coffee being used, although it is a diuretic so maybe they think it could target water retention? Coconut oil is great for ... some thyme oil and mix it, it is also anti inflammatory in a more natural way than Preperation H

Suggest the methods to improve the performance of steam turbine. Explain anyone in brief.

Description : (i) Suggest the methods to improve the performance of steam turbine. Explain anyone in brief.  (ii) Identity the different losses occurred in steam turbine. 

Last Answer : i) Methods to improve turbine efficiency 1) Reheating of Steam 2) Regenerative feed heating 3) Binary Vapour Plant Regenerative feed heating System : The process of draining ... heavily insulated to reduce the heat loss to surroundings by radiation and so these losses are negligible

Suggest the different methods to control the speed of rotation of steam turbine constant at all varying loads.

Description : Suggest the different methods to control the speed of rotation of steam turbine constant at all varying loads.

Last Answer : Following are the different methods to control the speed of rotation of steam turbine constant at all varying loads;  a) Throttle governing b) Nozzle control governing c) By pass governing d) Combine throttle and nozzle control governing e) Combine throttle and by pass governing

What are some natural methods to retain moisture on skin?

Description : What are some natural methods to retain moisture on skin?

Last Answer : Always stay hydrated.

Which of the following methods does not help in conserving soil fertility and moisture? (1) Contour ploughing (2) Dry farming (3) Strip cropping (4) Shifting agriculture

Description : Which of the following methods does not help in conserving soil fertility and moisture? (1) Contour ploughing (2) Dry farming (3) Strip cropping (4) Shifting agriculture

Last Answer : (4) Shifting agriculture Explanation: Shifting cultivation is an agricultural system in which plots of land are cultivated temporarily, then abandoned. It is also known as slash and burn ... reclaimed by natural vegetation, or sometimes converted to a different long-term cyclical farming practice.

Which of the following methods does not help in conserving soil fertility and moisture? (1) Contour ploughing (2) Dry farming (3) Strip cropping (4) Shifting agriculture

Description : Which of the following methods does not help in conserving soil fertility and moisture? (1) Contour ploughing (2) Dry farming (3) Strip cropping (4) Shifting agriculture

Last Answer : Shifting agriculture

Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have highest operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Description : Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have ... a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Last Answer : Ans: B

Which of the following precautions should be taken when a blown fuse, rated at 10 amperes, is replaced? A. Short out the fuse before removing it from the circuit. B. Use needle-nose pliers to remove fuse from the circuit. C. Replace blown fuse with one of equal voltage and ampere capacity. D. Fuses of 10 ampere rating and less are virtually harmless when energized and may be handled freely.

Description : Which of the following precautions should be taken when a blown fuse, rated at 10 amperes, is replaced? A. Short out the fuse before removing it from the circuit. B. Use needle-nose pliers to ... D. Fuses of 10 ampere rating and less are virtually harmless when energized and may be handled freely.

Last Answer : Answer: C

Which of the following should be the FIRST step in removing a generator from parallel operation? A. Trip the generator off the switchboard. B. Turn off all electrical equipment. C. Remove the load from the 'off going' generator. D. Increase the cycles of the generator staying on the line.

Description : Which of the following should be the FIRST step in removing a generator from parallel operation? A. Trip the generator off the switchboard. B. Turn off all electrical equipment. C. Remove the load from the 'off going' generator. D. Increase the cycles of the generator staying on the line.

Last Answer : Answer: C

A voltmeter located on a control panel has been operating correctly for six months, suddenly burns out. After removing it, it is found that neither side of the meter has been grounded. When installing the new meter it should be __________. A. grounded to the negative side B. connected to a large resistor between the positive side and the ground C. installed exactly as the old installation D. grounded to the positive side

Description : A voltmeter located on a control panel has been operating correctly for six months, suddenly burns out. After removing it, it is found that neither side of the meter has been grounded. When ... side and the ground C. installed exactly as the old installation D. grounded to the positive side

Last Answer : Answer: C

Temporary repairs to an open DC propulsion armature coil can be made by _____________. A. connecting the coil ends directly to a pair of negative brushes B. disconnecting coil ends, insulating each, and short circuiting the two commutator bars C. grounding the coil ends and short circuiting the commutator bar D. removing the sparking brushes

Description : Temporary repairs to an open DC propulsion armature coil can be made by _____________. A. connecting the coil ends directly to a pair of negative brushes B. disconnecting coil ends, insulating ... C. grounding the coil ends and short circuiting the commutator bar D. removing the sparking brushes

Last Answer : Answer: B

The propeller shaft speed in a turbo-electric, synchronous, propulsion drive motor is changed by varying the __________. A. turbine speed B. number of motor poles C. field strength of the generator D. field strength of the motor

Description : The propeller shaft speed in a turbo-electric, synchronous, propulsion drive motor is changed by varying the __________. A. turbine speed B. number of motor poles C. field strength of the generator D. field strength of the motor

Last Answer : Answer: A

When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Description : When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Last Answer : Answer: C

When a console indicating lamp burns out, attempts to renew it should not be made while maneuvering because _______________. A. the new lamp may be of a higher wattage and cause heat damage to the lens B. removing a faulty lamp usually causes an alarm to sound on the bridge C. attention should be paid only to engine orders D. a socket/wiring fault may cause a ground or short circuit to shut down a vital function

Description : When a console indicating lamp burns out, attempts to renew it should not be made while maneuvering because _______________. A. the new lamp may be of a higher wattage and cause heat damage to the lens ... D. a socket/wiring fault may cause a ground or short circuit to shut down a vital function

Last Answer : Answer: D

Turbine-Generator Lubrication Oil System Function

Description : Turbine-Generator Lubrication Oil System Function

Last Answer : Turbine-Generator Lubrication Oil System Function For large turbine-generators forced lubrication system and water cooling system should be continuously required during the operation of the turbine-generator and ... when the oil pressure is low. A second backup dc pumps are sometimes provided.

State the factors, for the choice of electrical system for an aero turbine.

Description : State the factors, for the choice of electrical system for an aero turbine.

Last Answer : A:The choice of electrical system for an aero turbine is guided by three factors: Type of electrical output: dc, variable- frequency ac, and constant- frequency ac. Aero turbine ... energy output: in conjunction with battery or other form of storage, or interconnection with power grid.

What are the working fluids in gas turbine?

Description : What are the working fluids in gas turbine?

Last Answer : 1.Air 2.Helium 3.Argon 4.Carbon dioxide

Explain reaction turbine in terms of head:

Description : Explain reaction turbine in terms of head:

Last Answer : High head- Francis Medium head- Propeller Low head- Kaplan

What precaution should be taken while removing a current operated relay when the equipment is in service?

Description : What precaution should be taken while removing a current operated relay when the equipment is in service?

Last Answer : Ensure that the CT is not getting opened by shorting the appropriate terminals. (Eventhough the terminals are automatically shorted once relay is removed the above point may carried out to ensure the same) 

What is the purpose of TOPP (turbine oil purification plant)?

Description : What is the purpose of TOPP (turbine oil purification plant)? 

Last Answer : The purpose of TOPP is to remove the water ingress in turbine oil system from the gland leaks, cooler leakage, and solid metal particles, which are produced due to rust, wear of bearings and to normalize the ... capacity of TOPP is, for solids - 5 microns and for water - 300 to 500 parts per milli.

State turbine governor setting.

Description : State turbine governor setting. 

Last Answer : On 2560 rpm turbine governor becomes effective and on 2760 rpm is turbine governor take over speed. 

What is the type turbine installed in KGS?

Description : What is the type turbine installed in KGS? 

Last Answer : Tandem compounded to expansion of steam, impulse reaction type.  

What type of governing system used in turbine and what are the purposes of the system?

Description : What type of governing system used in turbine and what are the purposes of the system? 

Last Answer : Hydraulic governing system of centrifugal (speed) governer type is adopted in turbine. Sensitive oil pressure to actuate centrifugal governer is 6.1 kg/cm2 (max). At 6.7 kg/cm2 relief valve ... speeder gear from BPC signal. Once synchronised the grid frequency and speeder gear controls the speed. 

Write critical speeds of turbine generator?

Description : Write critical speeds of turbine generator?  

Last Answer : Generator rotor 1st critical speed 1283 rpm 2nd critical speed 3600 rpm Combined turbine generator 1st critical speed 1938 rpm 2nd critical speed 2120 rpm 3rd critical speed 2385 rpm 4th critical speed 2837 rpm 

What are the futures of turbine generator?

Description : What are the futures of turbine generator? 

Last Answer : a. Low heat drop b. Moisture control (HP-0.26%, LP-3%.) c. Turbine governing system d. 70% steam dumping to the condenser to avoid reactor trip. e. Gland sealing f. LP exhaust hood cooling g. Generator stator and rotor cooling h. Hydrogen sealing i. Static excitation 

How shaft voltage produced by turbine?

Description : How shaft voltage produced by turbine? 

Last Answer : Due to un-symmetry in the flux path of core, non-uniform air gap, un-symmetry in the rotor magnetic field during short circuit in the rotor winding, causes voltage to develop across the ends of rotor shaft. 

How dearator pressure is maintained after turbine trip?

Description : How dearator pressure is maintained after turbine trip? 

Last Answer : Pegging steam is used to maintain dearator pressure after turbine trip.  

How turbine oil purification is achieved?

Description : How turbine oil purification is achieved?

Last Answer : Oil purification is achieved by centrifugal operation.  

Explain the main difference between impulse and reaction turbine.

Description : Explain the main difference between impulse and reaction turbine. 

Last Answer : When the inlet pressure of steam to the turbine is equal to outlet pressure of steam from the turbine the turbine is called the impulse turbine. In this type the heat is added is very less. ... than the inlet pressure of the steam. There is reduction in pressure with the increase in kinetic energy.

What is the purpose of turbine governing system?

Description : What is the purpose of turbine governing system?

Last Answer : Turbine governing system governs the speed of the turbine with the help of centrifugal governer. It reduces the steam inlet when turbine over speeds.  

Explain the principle of working of impulse steam turbine.

Description : Explain the principle of working of impulse steam turbine. 

Last Answer : When steam enters the turbine it suffers a change in direction and momentum, which gives rise to the rotation of the turbine. There will be no drop in pressure in impulse steam turbine.  

State the factors, for the choice of electrical system for an aero turbine.

Description : State the factors, for the choice of electrical system for an aero turbine.

Last Answer : The choice of electrical system for an aero turbine is guided by three factors: Type of electrical output: dc, variablefrequency ac, and constant- frequency ac. Aero turbine rotational speed ... output: in conjunction with battery or other form of storage, or interconnection with power grid.

Flue gases coming out from furnace is first going through a) Turbine b) Economizer c) Air pre-heater d) Chimney

Description : Flue gases coming out from furnace is first going through a) Turbine b) Economizer c) Air pre-heater d) Chimney

Last Answer : Ans: Economizer

Water hamming effect is occurs in a) Surge tank b) Penstock c) Turbine d) Reservoir

Description : Water hamming effect is occurs in a) Surge tank b) Penstock c) Turbine d) Reservoir

Last Answer : Ans: Penstock

Low head plants generally use (A) Pelton Turbines (B) Francis Turbine (C) Pelton or Francis Turbine (D) Kaplan Turbines

Description : Low head plants generally use (A) Pelton Turbines (B) Francis Turbine (C) Pelton or Francis Turbine (D) Kaplan Turbines

Last Answer : Ans: A In the hysterisis motor, the direction of rotation can be reversed by shifting the shaded pole region with respect to main pole. But not by changing supply lead because it has ac supply.

Factors on which soil resistance depends: a) depth of the electrode b) moisture c) Nacl d) all the above

Description : Factors on which soil resistance depends: a) depth of the electrode b) moisture c) Nacl d) all the above

Last Answer : Ans: D

The main purpose of an electric space heater installed in a large AC generator is to _____________. A. keep the lube oil warm for quick starting B. prevent moisture from condensing in the windings when the machine is shutdown C. prevent the windings from becoming brittle D. prevent acidic pitting of the slip rings

Description : The main purpose of an electric space heater installed in a large AC generator is to _____________. A. keep the lube oil warm for quick starting B. prevent moisture from condensing in the ... is shutdown C. prevent the windings from becoming brittle D. prevent acidic pitting of the slip rings

Last Answer : Answer: B

Electrical failures in motors are caused by the breakdown of insulation, which may be caused by _____________. A. penetration of moisture B. accumulation of dirt C. overheating D. all of the above

Description : Electrical failures in motors are caused by the breakdown of insulation, which may be caused by _____________. A. penetration of moisture B. accumulation of dirt C. overheating D. all of the above

Last Answer : Answer: D

Discoloration of the rotor bars in a squirrel-cage motor is typical evidence of _____________. A. moisture B. overheating C. vibration D. all of the above

Description : Discoloration of the rotor bars in a squirrel-cage motor is typical evidence of _____________. A. moisture B. overheating C. vibration D. all of the above

Last Answer : Answer: B

In the illustration, the component labeled 'G' _________. EL-0031 A. is lined with cardboard to maintain a moisture (electrolyte) barrier between cells B. is a one piece container with compartments for each individual cell C. must be UL approved for shipboard use D. can only contain one cell

Description : In the illustration, the component labeled 'G' _________. EL-0031 A. is lined with cardboard to maintain a moisture (electrolyte) barrier between cells B. is a one piece container with compartments for each individual cell C. must be UL approved for shipboard use D. can only contain one cell

Last Answer : Answer: B

Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. Compressed air should be blown over areas where dust is deposited. C. Spraying a solvent periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Description : Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. ... periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Last Answer : Answer: D

Moisture absorbed in the windings or condensed on the surface of electrical machinery insulation ________. A. is good for long term preserving since most insulation is organic and contains some amount B. lowers the insulation value and is a common cause of fault grounds in idle machines C. will enhance insulation resistance only if it is fresh water and contains no salt D. reduces the amount of current supplied or drawn by the machine so horsepower is limited

Description : Moisture absorbed in the windings or condensed on the surface of electrical machinery insulation ________. A. is good for long term preserving since most insulation is organic and contains some amount B. ... D. reduces the amount of current supplied or drawn by the machine so horsepower is limited

Last Answer : Answer: B

The purpose of the 'heater resistors' for the winch circuit shown in the illustration is to _______________. EL-0102 A. limit the current in the heater circuit B. dispel moisture in the 'master switch' housing & control panel C. keep the winch brake housing below the dew point D. maintain winch motor operating temperature

Description : The purpose of the 'heater resistors' for the winch circuit shown in the illustration is to _______________. EL-0102 A. limit the current in the heater circuit B. dispel moisture in the ' ... panel C. keep the winch brake housing below the dew point D. maintain winch motor operating temperature

Last Answer : Answer: B

Which of the listed devices may be installed on a large diesel-electric alternating current propulsion generator? A. Temperature detector coils inserted in the stator slots for measuring stator temperature. B. A CO2 fire extinguishing system. C. Electric space heaters to prevent condensation of moisture. D. All of the above.

Description : Which of the listed devices may be installed on a large diesel-electric alternating current propulsion generator? A. Temperature detector coils inserted in the stator slots for measuring stator temperature. B. ... . C. Electric space heaters to prevent condensation of moisture. D. All of the above.

Last Answer : Answer: D