Parameters considered during site selection

Parameters considered during site selection
by

1 Answer

Answer :

Parameters considered during site selection :

1) Availability of land

2) Connectivity to grid

3) Connectivity to the road

4) Easy access to locality/infrastructure

5) Ecology

6) Cost of transmission of energy

7) Cost of land and taxes

8) Transportation facilities
by

Related questions

Explain the principle of operation of solenoid. State two parameters on which selection of solenoid is based.

Description : Explain the principle of operation of solenoid. State two parameters on which selection of solenoid is based.

Last Answer : Diagram : Principle: A solenoid is a simple electromagnetic device that converts electrical energy directly into linear mechanical motion, but it has a very short stroke (length of movement), ... Parameters on which selection of solenoid is based1. Size 2. Flow capacity 3. Applied Voltage

Before constructing a dam, the factor to be considered for controlling sedimentation, is (A) Selection of dam site (B) Construction of check dams (C) Providing vegetation screens (D) All the above

Description : Before constructing a dam, the factor to be considered for controlling sedimentation, is (A) Selection of dam site (B) Construction of check dams (C) Providing vegetation screens (D) All the above

Last Answer : (D) All the above

Main application of biogas

Description : Main application of biogas

Last Answer : This energy release allows biogas to be used as a fuel; it can be used for any heating purpose, such as cooking. It can also be used in a gas engine to convert the energy in the gas into ... can be compressed, the same way as natural gas is compressed to CNG, and used to power motor vehicles. 

List of materials used for bio gas generation

Description : List of materials used for bio gas generation

Last Answer : Almost any organic material can be processed with anaerobic digestion. Anaerobic digestion is particularly suited to wet organic material and is commonly used for effluent and sewage treatment. This ... waste materials such as waste paper, grass clippings, leftover food, sewage and animal

Angstrom Pyrheloimeter

Description : Angstrom Pyrheloimeter

Last Answer : Angstrom Pyrheloimeter:- This pyrheliometer has a rectangular aperture, two manganin-strip sensors (20.0 mm 2.0 mm 0.02 mm) and several diaphragms to let only direct sunlight reach the sensor. ... zero, at which point the temperature raised by solar radiation is compensated by Joule heat.

Classify hydroelectric power plant

Description : Classify hydroelectric power plant

Last Answer : Classify hydroelectric power plant :- The classification according to Quantity of water available is  i ) Run-off river plants without pondage  ii) Run-off river plants with pondage  iii) Reservoir Plants ... according to nature of load is i) Base load plants  ii) Peak load plants 

Anaerobic digestion

Description : Anaerobic digestion

Last Answer : Anaerobic digestion: Anaerobic digestion is a biochemical process in which the particular kinds of bacteria digest biomass in an oxygen free environment. The process of anaerobic digestion occurs in a sequence of ... Carbon to nitrogen ratio 8) Nutrients 9) Retention time 10) Types of feed stock

Applications of solar energy

Description : Applications of solar energy

Last Answer : Solar energy can be used directly or indirectly for following applications or any equivalent:   1. For street lighting. 2. For road Traffic, signaling system. 3. For railway Traffic signaling system. ... for crops. 16. Solar furnace 17. Solar distillation 18. Space heating of building

Effect of greenhouse gases on climate change

Description : Effect of greenhouse gases on climate change

Last Answer : Effect of greenhouse gases on climate change : The effect of earth's atmosphere due to trapping of long wavelength infrared radiations by the CO2 layer in the atmosphere is called Green house effect. ... it may cause the climate change due to its heat trapping quality leading to green house effect.

Working of wind energy system with main components

Description : Working of wind energy system with main components

Last Answer : Working of wind energy system with main components Basic structure of windmill consists of the following components. I) Rotor blades: The rotor blades extract the wind energy and converts it into ... vii) Anemometer and wind vane: They are the instruments for measuring wind speed

Passive solar heating system

Description : Passive solar heating system

Last Answer : Passive solar heating system : A solar space heating can consist of a passive system, an active system or combination of both. Passive systems are typically less costly and less complex than active system. ... at the top of glazing allows the excess heat to outside when heating is not required

Explain solar distillation process.

Description : Explain solar distillation process. 

Last Answer : Figure shows various components of conventional double slope type solar distillation system. It is a air tight basin usually made up of concrete or special fiber with a transparent cover to ... of condensate channel. in this way with the use of solar energy distillation process is completed.

Classification of wind turbine

Description : Classification of wind turbine

Last Answer : Classification of wind turbine: a) According to their axis of rotation  1) Horizontal axis wind turbine  2) Vertical axis wind turbine b) According to size of capacity  1) Micro size  2) Small ...  1) Propeler type  2) Multiple blade type  3) Savonius type  4) Darrieus type

Hydro electric plant

Description : Hydro electric plant

Last Answer : Hydro electric plant : In Hydro electric power plants the energy of water is utilized to move the hydraulic turbines which in turn runs an electric generator to convert the mechanical energy ... potential energy of water is converted into mechanical work and ultimately into electrical energy

Waste heat Recovery system

Description : Waste heat Recovery system

Last Answer : Waste heat Recovery system Waste heat is energy that is rejected to the environment. It arises from equipment and operating inefficiencies, as well as from thermodynamic limitations on equipment and ... to minimize these costs, and to reduce environmental impact along with several other benefits.

Advantages of renewable Energy sources

Description : Advantages of renewable Energy sources

Last Answer : Advantages of renewable Energy sources 1. These energy sources are sustainable and will never exhaust 2. It is available in abundance. 3. It has low operating and maintenance cost. 4. No ... energy sources produce no waste products, so it has no impact on environment. It is pollution free.

Principles of photovoltaic power generation

Description : Principles of photovoltaic power generation

Last Answer : Principles of photovoltaic power generation: Photovoltaic plants consist of photovoltaic cells which work based on the photovoltaic effect. In photovoltaic effect, two dissimilar materials (like silicon and ... controller of battery controller 5. Equipment to control, conduct and protect power 

Detailed Energy Audit Methodology

Description : Detailed Energy Audit Methodology

Last Answer : Detailed Energy Audit Methodology: It is a comprehensive analysis of an energy project and offers the accurate estimate of energy savings and cost. It covers the detailed study of present ... energy 5. Calculation of energy efficiency and process systems 6. Recommendations for energy conservation 

Distinction between concentrating and non concentrating solar collector

Description : Distinction between concentrating and non concentrating solar collector  

Last Answer : Non concentrating or Flat plate collectors Concentrating type collectors Absorber area is large. Absorber area is small. Concentration ratio is 1. Concentration ratio is high. ... application such as power generation suitable where there are more clear days in a year.

Photosynthesis

Description : Photosynthesis

Last Answer : Photosynthesis : It is the process in which solar energy is converted into biomass energy. Photosynthesis process occurs only in green plants. It is the process of combining CO2 from the atmosphere ... light for photosynthesis to occur. 3 Plants need carbon dioxide to be able to photosynthesis.

Francis turbine

Description : Francis turbine

Last Answer : Francis turbine In Francis Turbine water flow is radial into the turbine and exits the Turbine axially. Water pressure decreases as it passes through the turbine imparting reaction on the turbine blades making ... imparts reaction on the runner and power is transferred to the turbine shaft.

Dry fermentation, Wet fermentation

Description : Dry fermentation, Wet fermentation

Last Answer : Dry fermentation : 1.Organic input remains stationary throughout process, eliminating moving parts and resulting in low system maintenance and repair costs 2. Batch process and stationary system allow precise ... input is agitated and moved through system Input limited to wet waste streams . 

Energy plantation

Description : Energy plantation

Last Answer : Energy plantation: There are certain plants which can be planted and harvested over regular period of time to have high yield per unit area. Thus the method of tapping maximum solar energy be ... house gas in quantities broadly equivalent to amount emitted when plant material decay or burned.

Altitude angle, Zenith Angle, Day length, Solar Azimuth angle, Local solar time, Surface azimuth angle, Slope, Declination angle

Description : Altitude angle, Zenith Angle, Day length, Solar Azimuth angle, Local solar time, Surface azimuth angle, Slope, Declination angle

Last Answer : 1) Altitude angle (α ): It is defined as the angle between the central ray from the sun , and a horizontal plane containing the observer is the Solar altitude angle. At the Sunrise and Sunset the ... sun to the centre of the earth and the projection of this line upon the earth's equatorial plane.

Need of orientation in concentrating type collectors

Description : Need of orientation in concentrating type collectors

Last Answer : Need of orientation in concentrating type collectors: In flat plate collectors solar direct and diffuse radiations without sun tracking are collected for heating. It causes the loss of energy during sunshine ... The focal axis is north-south and inclined at a fixed angle equal to the latitude

Uses of Instruments

Description : Uses of Instruments

Last Answer : Uses of Instruments:- a. Lux meter: To measure illumination level b. Pyranometer : To measure global radiations c. Pitot tube : It is a flow measurement device used to measure ... measures the oxygen and temperature of the flue gas, it automatically calculates the efficiency of the combustion 

Solar concentrating collector

Description : Solar concentrating collector

Last Answer : Solar concentrating collector:- These concentrating collectors are used in which the absorber is placed along the focus axis. In this the collector pipe is used as an absorber with a selective coating. Parabolic ... made of a large number of flat mirror strips on the parabolic firm base.

Different types of Renewable energy sources are

Description : Different types of Renewable energy sources are

Last Answer : Different types of Renewable energy sources are : 1) Solar energy 2) Wind energy 3) Tidal energy 4) Geothermal energy 5) Bio mass energy Utilization of energy sources can be by ... Direct methods - Thermal and photovoltaic Indirect methods - Tidal, wind, biomass and ocean thermal energy

What parameters or technical particulars are important to be considered while designing protection scheme of the transformer?

Description : What parameters or technical particulars are important to be considered while designing protection scheme of the transformer?

Last Answer : 1.Network Diagram showing the position of the transformer in the system 2.kVA or MVA rating of the transformer 3.Fault Level at the transformer 4.Voltage Ratio 5.Winding Connections 6.Per Unit ... Oil Filled 11.Length and area of cross section of the connecting leads between CTs and Relay Panel

All the following are chemical parameters considered when selecting an antiseptic or disinfectant except: a. Dehydration. b. Temperature. c. Stability. d. Ph

Description : All the following are chemical parameters considered when selecting an antiseptic or disinfectant except: a. Dehydration. b. Temperature. c. Stability. d. Ph

Last Answer : b. Temperature.

Which one of the following parameters is considered to determine the reflectance of a vegetation canopy? (A) Solar zenith angle (B) Azimuth angle (C) Look angle (D) All of these

Description : Which one of the following parameters is considered to determine the reflectance of a vegetation canopy? (A) Solar zenith angle (B) Azimuth angle (C) Look angle (D) All of these

Last Answer : Answer: Option D

List five system design parameters considered when system designers choose the system operational wavelength and link components.

Description : List five system design parameters considered when system designers choose the system operational wavelength and link components.

Last Answer : Launch power, connection losses, bandwidth, cost, and reliability

Which of the following parameters is not considered for external Bench Marking? a) scale of operation b) energy pricing c) raw materials and product quality d) vintage of technology

Description : Which of the following parameters is not considered for external Bench Marking? a) scale of operation b) energy pricing c) raw materials and product quality d) vintage of technology

Last Answer : b) energy pricing

SEM as compared to SEO is good for Testing  True  FALSE  Depends on Testing Parameters  Depends on the site in Question

Description : SEM as compared to SEO is good for Testing  True  FALSE  Depends on Testing Parameters  Depends on the site in Question

Last Answer :  True

Can adaptation and natural selection be considered acts separate and distinct from the process of evolution?

Description : Can adaptation and natural selection be considered acts separate and distinct from the process of evolution?

Last Answer : answer: to what end? An individual's adaptation has either a positive or neutral effect on evolution, by either allowing it to breed more that it otherwise would without the adaptation, or ... that adaptation to sufficiently alter the species' population, that is the very definition of evolution.

Most important factor to be considered in the selection of packings for absorbers is the __________ of packing. (A) Size (B) Durability (C) Porosity (D) Cost

Description : Most important factor to be considered in the selection of packings for absorbers is the __________ of packing. (A) Size (B) Durability (C) Porosity (D) Cost

Last Answer : (C) Porosity

Mathematical models using linear, dynamic, integer, or algorithm models are considered A. Project selection criteria B. A form of expert judgment C. Project selection methods D. A form of historical information

Description : Mathematical models using linear, dynamic, integer, or algorithm models are  considered  A. Project selection criteria B. A form of expert judgment C. Project selection methods D. A form of historical information

Last Answer : C. Project selection methods

What are the points to be considered for MCB (miniature circuit breaker selection)?

Description : What are the points to be considered for MCB (miniature circuit breaker selection)?

Last Answer :  I(L)x1.25=I(MAX) maximum current. Mcb specification is done on maximum current flow in circuit.

What Are The Factors To Be Considered In The Selection Of Materials For A Machine Element?

Description : What Are The Factors To Be Considered In The Selection Of Materials For A Machine Element?

Last Answer : While selecting a material for a machine element, the following factors are to be considered 1. Required material properties 2. Manufacturing ease 3. Material availability 4. Cost

State the different point to be considered in selection of survey station for a closed traverse

Description : State the different point to be considered in selection of survey station for a closed traverse 

Last Answer : 1) Main survey stations should be inter visible. 2) The main survey lines should form well-conditioned triangles. 3) Each triangle or portion of skeleton must be provided with sufficient check lines. ... ) Survey line must be as few as possible so that the frame work can be plotted conveniently.

Explain the principles considered for selection of material handling equipment.

Description : Explain the principles considered for selection of material handling equipment.

Last Answer : 1. Planning :All activity should be planned. Plan a system which include all the handling activities & co-coordinating the operations. 2. Simplification principle: Reduced or eliminate ... 10. Maintenance principle: Plan for preventing maintenance and schedule repair of all handling equipment

State the factors to be considered for control valve selection.

Description : State the factors to be considered for control valve selection.

Last Answer : Factors to be considered for control valve selection: The basic steps in control valve selection are 1. The first step in control valve selection involves collecting all relevant data and completing the ... force or friction. A hand wheel is needed if manual operation of the valve is expected.

Discuss the factors considered for selection of pump

Description : Discuss the factors considered for selection of pump

Last Answer : 1) Pressure: Pump is ued to pressurize the fluid in system according to need of pressure we can select pump as below 2) Speed of pump: if the speed of pump is increased beyond its ... according to application we can choose it by economical aspect cost of pump & its spares should be less.

What are the factors to be considered while selection of motors for different drives?

Description : What are the factors to be considered while selection of motors for different drives?

Last Answer : Following Factors are considered while selecting electric drive (Motor) for particular application:  Factors to be considered for selection of Electrical Drives:  1) Nature of Supply:- Whether supply ... , load equalization 7) Cost: - Capital, Running and maintenance cost should be less.  

State the factors to be considered for selection of shape and size of the car of elevator.

Description : State the factors to be considered for selection of shape and size of the car of elevator.

Last Answer : The size and shape of elevator car depends on following factors:  i) No. of passenger to be carried: While selecting the size of car it is a usual practice to allow. A Space of 2 Sq. ... of elevator depends on space available in building.  iii) Type of building  iv) Application of elevator

The following should be considered while selection a transducer: -

Description : The following should be considered while selection a transducer: -  a) Sensitivity b) Operating Range c) Frequency Response d) All the above

Last Answer : The following should be considered while selection a transducer: -   All the above

What is a site that contains a selection of quotes in their original toungue?

Description : What is a site that contains a selection of quotes in their original toungue?

Last Answer : I can’t find a single site that does that. There are sites specific to languages.

What is the most important criterion in rehearsals site selection?

Description : What is the most important criterion in rehearsals site selection?

Last Answer : The site must be right for the selected rehearsal type.

Which of the following factors is the most important in the site selection for a nuclear power plant? (A) Absence of earthquake prone zone in nearby areas (B) Abundant availability of water (C) Remotely located from residential areas (D) Proximity to fuel source

Description : Which of the following factors is the most important in the site selection for a nuclear power plant? (A) Absence of earthquake prone zone in nearby areas (B) Abundant availability of water (C) Remotely located from residential areas (D) Proximity to fuel source

Last Answer : (A) Absence of earthquake prone zone in nearby areas

The factor for the selection of pumping station site, is (A) Distance of the source of contamination or pollution (B) Height above the H.F.L. of the river (C) Future expansion (D) All the above

Description : The factor for the selection of pumping station site, is  (A) Distance of the source of contamination or pollution  (B) Height above the H.F.L. of the river  (C) Future expansion  (D) All the above

Last Answer : (D) All the above