Explain the principles considered for selection of material handling equipment.

Explain the principles considered for selection of material handling equipment.
by

1 Answer

Answer :

1. Planning :All activity should be planned. Plan a system which include all the handling activities & co-coordinating the operations.

2. Simplification principle: Reduced or eliminate unnecessary movements and equipment.

3. Gravity principle: Utilize the gravity whenever possible to move material.

4. Space utilization: Make optimum utilization of building cube.

5. Safety principle: Provide for safe handling methods and equipment

6. Minimum movement: As per this principle, movement of material and manpower should be minimum

7. Mechanization/ automation principle: Use mechanized or automated handling equipment when practicable.- Equipment selection according to movement & method of material handling

8. Standardization principle: Standardize the method as well as type of sizes of handling equipment.

9. Flexibility principle: Use methods and equipment’s that can perform a variety of tasks and application.

10. Maintenance principle: Plan for preventing maintenance and schedule repair of all handling equipment
by

Related questions

Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Description : Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Last Answer : Four Factors affecting Selection of Material Handling System: [1] Adaptability and Flexibility [2] Type of Material to be handled [3] Type of Layout [4] Type of Production [5] ... [11] Cost of installation and handling Suitable Material Handling Devices for Following Activities:

Explain any six factors on which selection of material handling device depends.

Description : Explain any six factors on which selection of material handling device depends.

Last Answer : Factors Affecting the selection of Materials Handling Devices/Equipment: [1] Adaptability: The load carrying and movement characteristics of the equipment should fit the materials handling problem. [2] ... The consideration of the cost of the MH Equipment is an obvious factor in its selection

Describe various principles of material handling in details.

Description : Describe various principles of material handling in details.

Last Answer : A) Related to planning. - All activity should be planned. - Plan a system which include all the handling activities & co-coordinating the operations. - Simplification ... Performance efficiency principle: Determine efficiency of material handling performance in terms of expense per unit handled.

Explain the need and importance of material handling devices in an industry.

Description : Explain the need and importance of material handling devices in an industry. 

Last Answer : Need of material handling devices: Material handling is an important activity in the industries. A large part of indirect labour employed in an industry is engaged in handling of materials. It has ... material handling and provides proper working conditions. 6. Reduced in process inventory.

Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Description : Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Last Answer : Types of material handling devices 1.Trucks : i) Power lift : a. Fork lift b. elevating platform ii) Hand Lift. iii) Porters trolley. 2.Tractors and trailers 3. Hoist and cranes: ... bands can also be used. 5. Speed of belt normally ranges from 1 m/s to 70 m/s.

Explain with neat sketch any two material handling devices used in mass production.

Description : Explain with neat sketch any two material handling devices used in mass production.

Last Answer : 1.Roller conveyors may be gravity aided or powered and are employed for transporting products having flat bottoms. Bigger jobs can be handled as they are, whereas small items are put in boxes, tins ... and unloading of the products.   4.Screw Conveyor, Pneumatic Conveyor, Elevated Conveyor . 

Write any one application for each of following material handling equipments: (i) Bucket Conveyors (ii) Fork Lift Trucks (iii) Jib Crane (iv) Gravity Chutes

Description : Write any one application for each of following material handling equipments: (i) Bucket Conveyors (ii) Fork Lift Trucks (iii) Jib Crane (iv) Gravity Chutes

Last Answer : Applications of MH Equipments:

Suggest appropriate material handling device for

Description : Suggest appropriate material handling device for 

Last Answer : (i) Transporting coal in thermal power plant - Belt Conveyor. (ii) Transporting cotton in ginning unit - Trucks, Tractors and trailers. (iii) Transporting pallets - Fork lift truck, hand lift ... packed boxes of biscuits within industry - Hand wheel barrow or hand trolley or Porter's trolley.

Name the material handling devices for following activities:

Description : Name the material handling devices for following activities:

Last Answer : (i) To move and stack material at height:- Fork lift truck (ii) To lift heavy stones at height:- Cranes (iii) To move cement bags at a short and fixed distance:- Conveyor (iv) To move chemical from store to storage tank:- Pipelines

List four material handling devices and also write one application of each.

Description : List four material handling devices and also write one application of each.

Last Answer : 1. Fork lift truck - To move and stack material at height. 2. Cranes - To lift heavy stones at height. 3. Conveyor - To move cement bags at a short and fixed distance. 4. Pipelines - To move chemical from store to storage tank. 

Explain the design principles of plant layout.

Description : Explain the design principles of plant layout.

Last Answer : Design Principles of Plant Layout: S.N. Design Principles Description 1 Principle of Integration All the plant facilities should be fully integrated into a single operating unit ... should be utilized in an optimum manner so as to result in minimum initial capital investment.

Explain general principles of jigs/fixture design

Description : Explain general principles of jigs/fixture design

Last Answer : 1. Before planning the design of a tool, compare the cost of production of the work with present tools with the expected cost of production, using the tool to be made. Confirm that the cost of ... nearly as possible opposite to some bearing point of the work to avoid springing. 11. Round all corners

Explain any four factor that affects selection of site.

Description : Explain any four factor that affects selection of site.

Last Answer : Factors that affecting on selection of site. 1. Availability of raw material: As far as possible the site selected should be near the source of raw materials so that cost of transportation can be ... attitude: Mindset of the local people is also important, many times they oppose the work. 

What are the factors influencing the selection of a site for a new industry/plant? Explain

Description : What are the factors influencing the selection of a site for a new industry/plant? Explain 

Last Answer : Factors influencing the selection of a site for new Industry/Plant: The location of the plant can have a crucial effect on the overall profitability of a Project, and the scope for ... rental or taxes and other inducements in the hope of attracting certain industries to particular locations.

Which is area of engineering and science which understand the different principles, structure and programming of robot. (A) Mechatronics (B) Robotics (C) Aeronautics (D) None of the above

Description : Which is area of engineering and science which understand the different principles, structure and programming of robot. (A) Mechatronics (B) Robotics (C) Aeronautics (D) None of the above

Last Answer : B

State at least eight principles of jigs/ fixture design

Description : State at least eight principles of jigs/ fixture design

Last Answer : The following principles should be considered for design of jigs/ fixtures 1.Rigidity: jigs/ fixtures should be sufficiently stiff/rigid to achieve required accuracy during machining. 2.Fool ... or clearance grooves should be provided for easy removal of metal chips, burrs after machining

Enlist general principles of jigs and fixtures

Description : Enlist general principles of jigs and fixtures 

Last Answer : Principles of Jigs and Fixtures:- [1] Location Principle [2] Clamping and guiding Principle [3] Loading and unloading Principle [4] Motion Economy [5] Fool proofing [6] Rigidity [7] Clearance ... safety [14] Ejectors [15] Truninos [16] Inserts [17] Provision of coolant [18] Economy

What are the important factors affecting selection of site for a new plant

Description : What are the important factors affecting selection of site for a new plant

Last Answer : Factors affecting selection of site for new industry/plant: 1. Availability of raw material: As far as possible the site selected should be near the source of raw materials so that cost of ... in such a way that a plenty of land other facilities must be available for future expansion.

Explain in brief the allowances to be considered while estimating the standard time.

Description : Explain in brief the allowances to be considered while estimating the standard time.

Last Answer : Allowances to be considered while estimating the Standard Time: Allowances are added to the normal time in order to arrive at standard time. It is impossible to work throughout the day even ... under exceptional circumstances. It is used with utmost care and only in clearly defined circumstances.

Explain the various steps for planning a process for product from raw material to finished product in an industry.

Description : Explain the various steps for planning a process for product from raw material to finished product in an industry.

Last Answer : 1. Analysis of Product and its specification: - During analysis, following parameter should be considereda. Drawing and specification of product. b. Quality of product. c. Number of parts/components per ... and fixing the rates of payment. 11. Prepare the route sheet and operation sheet.

What allowances are considered while calculating standard time?

Description : What allowances are considered while calculating standard time? 

Last Answer : following types of allowances are considered while calculating standard time. 1) Relaxation allowance a) Personal need allowance b) Fatigue allowance i) Basic fatigue allowance ii) Variable ... 2) Contingency allowance 3) Special allowance 4) Process allowance 5) Interference allowance

What are the factors to be considered to determine stages of inspection during process planning?

Description : What are the factors to be considered to determine stages of inspection during process planning?

Last Answer : Factors to be considered to determine stages of Inspection during Process Planning: 1. Type of Production System 2. Type of Facility Layout 3. Type (Nature) of Product/Components 4. ... /Equipments used 5. Application of the Product/Components etc. 6. Strength/characteristics of the product

____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Description : ____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Last Answer : A

Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.

Description : Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.

Last Answer : Operation Sheet with correct sequence of operations for the above given component by assuming suitable material and cutting conditions is as shown in below table;

Write stepwise procedure for converting raw material into finished product.

Description : Write stepwise procedure for converting raw material into finished product.

Last Answer : Planning of process from raw material to finished product:- Steps involved in process planning: 1. Analysis of Product and its specification: - During analysis, following parameter should be considered, ... fixing the rates of payment. 11. Prepare the route sheet and operation sheet.

Define productivity index. State it with respect to labour, material and machine.

Description : Define productivity index. State it with respect to labour, material and machine.

Last Answer : Productivity Index:- It is used to compare the productivity during the current year with the productivity during the base year. Base year is any year which the company users or comparative study. ... key actor in economic production/operation..It is Number o units produced per cost o material.

List down eight important steps for planning a process for a product from raw material to finished product in an industry.

Description : List down eight important steps for planning a process for a product from raw material to finished product in an industry.

Last Answer : Steps for Process Planning for a Product from Raw Material to Finished Product: Specific activities involved in planning a process for a product from raw material to finished product in an ... gauges required for inspection. This operation described in detail, in later section of this chapter.

Explain the concept of AGV? State it’s any two applications.

Description :  Explain the concept of AGV? State it’s any two applications. 

Last Answer : AGV is the battery operated programmed vehicle, used to carry load from one location to another by following a prescribed path around the manufacturing floor. It is a driverless vehicle, ... System) 2) AGV material handling system is very suited to computer integrated manufacturing system  

Explain various Robot configurations with neat sketch.

Description : Explain various Robot configurations with neat sketch. 

Last Answer : Different Robot Configurations: Robots are being classified on the basis of their physical configuration and control systems adopted. These classifications are briefly described as below: [1] ... direction for vertical insertion tasks. It is basically used for the assembly purpose.

What is ejector? Explain role and necessity of ejector in the design of jigs and fixtures.

Description : What is ejector? Explain role and necessity of ejector in the design of jigs and fixtures.

Last Answer : Ejector: Ejector is used to remove the work piece from close fitted locators and is present behind the work piece. Ejector speed up the operation by reducing unloading time. This increases the ... [6] The combined mechanism used in Ejectors can be powered hydraulically or by compressed air. 

Explain the concept of JIT and how does it help the manufacturing system to improve productivity?

Description : Explain the concept of JIT and how does it help the manufacturing system to improve productivity?

Last Answer : Concept of JIT: [1] JIT is a Production methodology which aims to improve overall productivity through elimination of waste and which leads to improved quality. [2] JIT concept was ... ] It improves customer satisfaction [14] It improves working condition and relation between employees. 

Explain the importance of ‘5S’ (“Five S”) Concept.

Description : Explain the importance of ‘5S’ (“Five S”) Concept.

Last Answer : Introduction of 5 S Concept: [1] 5S is a process of workplace organization and housekeeping which is carried out gradually and systematically. [2] It is a structured program to implement workplace ... In fact, 5S is a basic step in a journey towards Total Quality Management (TQM).

What are the different types of Fixtures? Explain any one with sketch.

Description : What are the different types of Fixtures? Explain any one with sketch.

Last Answer : Types of Fixtures: Following are the types of Fixtures according to the type of machine operations for which they are used. [1] Lathe (Turning) Fixture [2] Milling fixtures  [3] Grinding ... relative to the tool of the machine table and guide the broaching tool in relation to the job. 

Explain the principle of working of hydraulic actuator and state its advantages.

Description : Explain the principle of working of hydraulic actuator and state its advantages.

Last Answer : Working Principle of Hydraulic Actuator  1. According to Pascal, when there is an increase in pressure at any point in a confined incompressible fluid, then there is an equal increase at every point in ... better performance than others. 3. Power to weight ratio of these actuators is high.

List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Description : List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Last Answer : List of Types of clamping devices used in design of jigs. i. Screw clamp ii. Pivoted clamp. iii. Equalizing clamp. iv. Latch clamp. v. Wedge clamp. vi. Hinged jaw clamp. ... to be gripped on its edges as shown in figure. This arrangement ensures easy machining of the work piece 

Explain the following terms in context with work study.

Description : Explain the following terms in context with work study.

Last Answer : i. Therbligs. ii. MTM (Method Time Measurement)  Therbligs :  1. Therbligs are used to describe the basic element of movement or fundamental hand motions of the work cycle. 2. Every ... sum of these motion times is the time an operator of average skill would take to perform the task.

Explain how Gantt chart is used in project planning with proper example.

Description : Explain how Gantt chart is used in project planning with proper example. 

Last Answer : Use of Gantt Chart in Project Planning: Gantt Chart is a project planning tool that can be used to represent the timing of tasks required to complete a project. Because Gantt chats are simple to ... a chart, which are used to record the actual operating times and delays of workers and machines.

Explain the concept of production system with proper input output model.

Description : Explain the concept of production system with proper input output model.

Last Answer : Concept of Production System: The Production System of any organization is that part which produces the organizations products. [1] Production is the basic activity of any organization and all ... feedback system about the activities, which is essential to control and improve system performance.

Explain tactile sensors in robots

Description : Explain tactile sensors in robots

Last Answer : Tactile Sensors:- Tactile sensors provide the robot with the capability to respond to contact forces between itself and other objects within its work volume. Tactile sensors can be divided ... magnitude of the contact force. Strain gauge devices are typically employed in force measuring sensors.

Explain pull and push types of manufacturing system

Description : Explain pull and push types of manufacturing system

Last Answer : Pull Type Manufacturing System: [1] Just in Time (JIT) is a pull system which is also known as Make to Order Production. [2] Pull System means that parts are produced to order and the ... represented by "Make to Stock" (MTS) in which the production is not based on actual demand.

Explain any two clamping devices with neat sketch

Description : Explain any two clamping devices with neat sketch

Last Answer : [1] Screw clamp:- It is particularly useful when a component is to be gripped on its edges. This arrangement insures easy machining of top surface of work piece. [2] Equalizing clamp: - It ... is operated by simply actuating the handle up or down which locks or unlocks the strap with the work.

Explain in brief steps involved in process planning.

Description : Explain in brief steps involved in process planning.

Last Answer : Steps involved in process planning: 1. Analysis of Product and its specification: - During analysis, following parameter should be considered, a. Drawing and specification of product. b. Quality of ... and fixing the rates of payment. 11. Prepare the route sheet and operation sheet.

State and explain the basic principle to be followed to develop a good plant layout.

Description : State and explain the basic principle to be followed to develop a good plant layout.

Last Answer : Following are the basic principle to be followed to develop a good plant layout. 1. Overall integration: A good layout is one that integrates men, materials, machine and supporting ... to the production process. For this purpose there must be sufficient space between different machines.

How productivity is measured? Explain any one method of productivity measurement.

Description : How productivity is measured? Explain any one method of productivity measurement.

Last Answer : Measurement of productivity: - For measurement of productivity, one must find out input and output of the system. To measure the input resources and goods or services supplied is a critical job ... , cutting tools, coolant etc. Material productivity measures in terms of goods produced.

What is meant by 5'S'? Explain each 'S' in details

Description : What is meant by 5'S'? Explain each 'S' in details

Last Answer : 5 S' Concept:- 5'S is the name of a workplace organization methodology that uses a list of five Japanese words which are seiri, seiton, seiso, seiketsu and shitsuke constitute the system. ... Eliminate unwanted items. ➢ Maintain the discipline at work place ➢ Improved safety

Explain various configurations with sketches

Description : Explain various configurations with sketches

Last Answer : Robot Configurations 1) Rectangular Configuration:- This uses three perpendicular slides to construct the x, y, z axes. By moving three slides relative to one another, the robot is capable of ... , which provides a substantial rigidity in the vertical direction for many essential tasks.  

State types of mechanical joints used in robots. Explain any one with sketch.

Description : State types of mechanical joints used in robots. Explain any one with sketch.

Last Answer : [1] Rotational joint [2] Linear joint [3] Twisting joint [4] Orthogonal & [5] Revolving joint Rotational Joint: Rotational joint can also be represented as R - Joint. This type will allow the ... to the rotational axes. As like twisting joint, the output link spins about the input link. 

Explain any one non tactile sensor used in robot

Description : Explain any one non tactile sensor used in robot

Last Answer : Non Tactile Sensor  [1] Vision Sensor: Robot vision is made possible by means of video camera, a sufficient light source and a computer programmed to process image data. The camera is mounted ... the input and the stored vocabulary word the robot performs some actions which correspond to the word.

Explain the concept of lean manufacturing

Description : Explain the concept of lean manufacturing

Last Answer : Lean manufacturing or lean production, often simply "lean", is a systemic method for the elimination of waste (" Muda") within a manufacturing process. Lean manufacturing is a production practice that ... T obtained higher customer satisfaction 4) To reduce per unit cost 5) To control inventory 

Explain cylindrical locator with neat sketch

Description : Explain cylindrical locator with neat sketch 

Last Answer : Cylindrical locators: - Cylindrical locators are very useful when finely finished holes are available for the positioning of components. It is used for locating components having drilled holes. The cylindrical ... jig s body around the locator is undercut to provide space for swarf clearance