Classify various types of Milling Machines. List major parts of Universal Milling Machine.

Classify various types of Milling Machines. List major parts of Universal Milling Machine.
by

1 Answer

Answer :

Classification of Milling Machine:-

1) Column and Knee Type Milling Machine

a. Plain or Horizontal Milling Machine

b. Hand Milling Machine

c. Vertical Milling Machine

d. Universal Milling Machine

e. Omniversal Milling Machine

2) Manufacturing or Fixed Bed Type Milling Machine

a. Simplex Milling Machine

b. Duplex Milling Machine

c. Triplex Milling Machine

3) Planer Type Milling Machine

4) Special Purpose Milling Machine

a. Cam Milling Machine

b. Planetary Milling Machine

c. Profile Milling Machine

d. Drum Milling Machine

e. Duplicating Milling Machine

Major Parts of Universal Milling Machine:

[1]Base [2]Column [3]Knee [4]Saddle [5]Table [6]Overhanging arm [7]Spindle [8]Arbor
by

Related questions

Classify various types of molding sands and give it’s uses.

Description : Classify various types of molding sands and give it’s uses.

Last Answer : 1. Special Sand: Uses: Used for cores of brass and bronze casting, for non- ferrous castings of an intricate shape and for heavy steel casting.  2. Green sand: Uses: It is used only for simple and ... 9. Core sand: Uses: Sand used for making cores is called core sand, sometimes called, oil sand. 

Classify various Manufacturing Processes.

Description : Classify various Manufacturing Processes. 

Last Answer : The Four main types of Manufacturing Processes are (1) Casting & Molding, (2) Machining, (3) Joining & Shearing and (4) Forming.

Explain keyway milling process with standard milling cutters.

Description : Explain keyway milling process with standard milling cutters.

Last Answer : Keyway Milling Operation: This milling process produce keyway slot. The cutter use if thin size. This operation suited for long keyways. The position of the cutter is shown in figure. Standard ... and then the cut is taken. Woodruff key is produced by using a woodruff key slot cutter.

Explain Gang Milling Process.

Description : Explain Gang Milling Process.

Last Answer : Gang Milling Operation: It involves the use of a combination of more than two cutters, mounted on a common arbor, for milling a number of flat horizontal and vertical surfaces of a work piece ... . The cutting speed of a gang of cutters is calculated from the cutter of the largest diameter. 

Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Description : Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Last Answer : c.is a method for controlling by means of set of instructions

State various types of Cast Iron and give application of each.

Description : State various types of Cast Iron and give application of each. 

Last Answer : There are four basic types of Cast Iron - (1) White Cast Iron: Applications: Lifter Bars, Shell Liners in Grinding Mills, Pumps, Balls and Rings of Coal Pulverisers, etc. (2) Gray Cast Iron. ... Parts, Anchor of Ships, etc. (4) Malleable Cast Iron. Applications: Pots Pans and utensils, etc.

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

In which machine we get feedback? a.Lathe machine b.NC machine c.CNC machine d.Milling machine

Description : In which machine we get feedback? a.Lathe machine b.NC machine c.CNC machine d.Milling machine

Last Answer : c.CNC machine

Milling machine vs Milling machine.

Description : What's the difference?

Last Answer : Milling machine is a milling machine tool.

Flywheel is used in (A) Punch press (B) Drilling machine (C) Surface grinder (D) Milling machine

Description : Flywheel is used in (A) Punch press (B) Drilling machine (C) Surface grinder (D) Milling machine

Last Answer : (A) Punch press

machine is used for "Threshing , Harvesting , Separating , Cleaning and Collecting grains " a) Lathe b) Milling c) Combine d) Forklift

Description : machine is used for "Threshing , Harvesting , Separating , Cleaning and Collecting grains " a) Lathe b) Milling c) Combine d) Forklift

Last Answer : Combine 

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

List the basic types of rubber. Give one application of each.

Description : List the basic types of rubber. Give one application of each. 

Last Answer : Basic types of rubber with application  A) Natural rubber Applications :- 1) Belts, 2. Shoe, 3. Coatings, 4. Packaging, 5. Soles, 6. Automobile tyres, 7. Seals and gaskets, 8. Chemical ... 7. Tubeless tire liners, Inner tubes 8. Stoppers for glass bottles, 9. Medicine bottles, and pharmaceuticals 

Explain the importance of various machining parameters in improving tool life.

Description : Explain the importance of various machining parameters in improving tool life.

Last Answer : Various Machining Parameters in Improving Tool Life are: 1. Hardness and machinability of the metal to be machined. 2. Quality of heat treatment if it is steel tool. 3. Whether machining is to be done with or ... tool. 6. Depth of cut. 7. Feed to be given to the tool. 8. Cutting Speed.

Explain the importance of pattern allowances and state various pattern allowances.

Description : Explain the importance of pattern allowances and state various pattern allowances. 

Last Answer : Pattern Allowances are Important Because: 1. Solid contraction can be reduced by providing more allowance on patterns. 2. When a pattern is drawn from a mould, there is always some ... allowance iii. Machining allowance iv. Distortion or camber allowance v. Shake allowance / rapping allowance

Describe various phase transformations of iron after cooling at various rates using TTT diagram.

Description : Describe various phase transformations of iron after cooling at various rates using TTT diagram.

Last Answer : TTT is Time-Temperature-Transformation diagram. It shows the microstructures resulting from non-equilibrium cooling which is not possible on Fe-c diagram. It shows various microstructures of steels depending upon cooling rate & also the temperature and time taken for each transformation.

Differentiate Hardening and Tempering of Automobile Parts.

Description : Differentiate Hardening and Tempering of Automobile Parts.

Last Answer : Differentiate Hardening and Tempering: Parameter Hardening Tempering Definition Hardening or quenching is the process of increasing the hardness of a material. Tempering is the process of ... a metal tempering is done to reduce the brittleness of quenched metal or alloy.

If you are asked to classify the various algae into distinct groups, which of the following characters you should choose? (a) Nature of stored food materials in the cell (b) Structural organization of thallus (c) Chemical composition of the cell wall (d) Types of pigments present in the cel

Description : If you are asked to classify the various algae into distinct groups, which of the following characters you should choose? (a) Nature of stored food materials in the cell (b) Structural organization of thallus (c) Chemical composition of the cell wall (d) Types of pigments present in the cel

Last Answer : (d) Types of pigments present in the cel

Describe the construction and working of bench drilling machine with block diagram.

Description : Describe the construction and working of bench drilling machine with block diagram.

Last Answer : Major Parts of Bench Drilling Machine : Functions of Parts: i. Base: It supports the column, which in turn, support the table and head etc. ii. Spindle: It is made up of alloy steel. It ... : It is vertical round or box section, which rests on the base and supports the head and the table.

Write four operations performed on Lathe /machine.

Description : Write four operations performed on Lathe /machine.

Last Answer : Operations Performed on Lathe Machine are: 1. Facing, 2. Plain turning, 3. Step turning, 4. Taper turning, 5. Drilling, 6. Reaming, 7. Boring, 8. Undercutting, 9. Threading, 10. Knurling. 

This black engineer was granted a patent in 1872 for the first automatic oil lubricator. The lubricating cup regulated the flow of oil onto moving parts of machines, revolutionizing the machine industry. Was this well-known inventor: w) Elijah McCoy x) Lewis Latimer y) Leonard McFall z) Branville Woods

Description : This black engineer was granted a patent in 1872 for the first automatic oil lubricator. The lubricating cup regulated the flow of oil onto moving parts of machines, revolutionizing the machine industry. ... well-known inventor: w) Elijah McCoy x) Lewis Latimer y) Leonard McFall z) Branville Woods

Last Answer : ANSWER: W -- ELIJAH McCOY

Classify CNC machines.

Description : Classify CNC machines.

Last Answer : Classification of CNC machines. A. According to control loop feedback system: 1) Open - loop system 2) Closed - loop system B. According to type of tool motion control system: 1) Finite ... D. According to type of controller: 1) NC based controller system 2) CNC based controller system

List two important properties of Cutting Fluids.

Description : List two important properties of Cutting Fluids.

Last Answer : Properties of Cutting Fluid: 1. High heat absorption 2. Good lubricating qualities to produce low coefficient of friction 3. Low viscosity to permit free flow of liquid 4. Non-corrosive to the work or ... to the skin of operator 8. Transparency so that the cutting action of the tool may be observed 

List four polymeric materials.

Description : List four polymeric materials.

Last Answer : Two types of polymeric materials are : A) Thermo plastic and B) Thermosetting plastic A) Thermoplastics are 1. Polythene 2. Polypropylene 3. Polystyrene 4. Nylon 5. Acrylics 6. ... (iii) Melamine-formaldehyde resins (iv) Polyester resins (v) Epoxy resins (vi) Silicone resins

Large tools and machines used in a production process for a considerable length of time are classified as A)major equipment. B)accessory equipment. C)component parts. D)raw materials. E)consumable supplies.

Description : Large tools and machines used in a production process for a considerable length of time are classified as A)major equipment. B)accessory equipment. C)component parts. D)raw materials. E)consumable supplies.

Last Answer : A)major equipment

List various types of CNC machine

Description : List various types of CNC machine

Last Answer : • CNC Plasma Cutting Machine. • CNC Laser Cutting Machine. • CNC Milling Machine. • CNC Router Machine. • CNC Lathe Machine.

Do they have a universal remote for Karaoke machines?

Description : Do they have a universal remote for Karaoke machines?

Last Answer : no but sometimes you can find the remote sold seperatly online.

Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one(B) There are only four methods namely compression, impact, attrition andcutting, which the size reduction equipments employ(C) Cutting machines mainly employ 'attrition' for size reduction of solids(D) Operating principles of Dodge and Blake jaw crushers are combined inthe working of universal jaw crushers

Description : Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one (B) There are only four methods namely compression, impact ... Operating principles of Dodge and Blake jaw crushers are combined in the working of universal jaw crushers

Last Answer : (C) Cutting machines mainly employ 'attrition' for size reduction of solids

A general-purpose or row-crop tractor is machines A. Single use C. Both A & B B. Universal D. None of Above

Description : A general-purpose or row-crop tractor is machines A. Single use C. Both A & B B. Universal D. None of Above

Last Answer : Universal

A network system allows dissimilar machines to do what within one universal system?

Description : A network system allows dissimilar machines to do what within one universal system?

Last Answer : Exchange information.

The speed control of universal motor used for sewing machines is by?

Last Answer : The speed control of universal motor used for sewing machines is by varying the resistance.

What are the various parts needed for an ice machine?

Description : What are the various parts needed for an ice machine?

Last Answer : Some parts of an ice machine are float switches, thumbscrews, thermostats, hose, fan motor, and pump. You also need electricity and an electricity outlet.

Classify boilers according to various factors.

Description : Classify boilers according to various factors. 

Last Answer : Classifications of boilers 1.Use a. stationary b. mobile 2. Tube contents a. fire tube boiler b. water tube boiler 3. Tube shape and position a. Tube shape (Form) -i. Straight ii. ... . forced circulation 6. Heat source a. Fuel b. hot wastergaes c. electrical energy d. nuclear energy 

In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Last Answer : d.Gear cutting

Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Description : Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Last Answer : a.5 axis CNC Milling

Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Description : Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Last Answer : b.Subtractive manufacturing

Which of the following is not subtractive process? a.Milling b.Stereo-lithography c.Sawing d.EDM

Description : Which of the following is not subtractive process? a.Milling b.Stereo-lithography c.Sawing d.EDM

Last Answer : b.Stereo-lithography

CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Description : CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Last Answer : c.welding

What are the benefits of down cut milling ?

Description : What are the benefits of down cut milling ?

Last Answer : The advantages of down cut milling are- 1. The downward pressure puts the workpiece on the table. 2. More depth of cut can be given. 3. Quick material removal is possible. 4. Increases production ... of the cutter do not rub against the workpiece surface. As a result, more heat is not generated.

What does milling mean ?

Description : What does milling mean ?

Last Answer : : The literal meaning of milling is the process of crushing or cutting with the help of crushing machine. This means that milling is the process of cutting the object with the help of ... processes performed by milling machines. Gear cutting , surface finishing , facing are some of these processes.

__________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Description : __________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Last Answer : (D) Pebble

Powder metallurgy process does not make metal powder by (A) Atomisation (B) Grinding/milling (C) Hammering (D) Electrolytic deposition

Description : Powder metallurgy process does not make metal powder by (A) Atomisation (B) Grinding/milling (C) Hammering (D) Electrolytic deposition

Last Answer : Option C

Milling a hundred pounds of wheat should yield ____ percent straight flour. a. 72 to 75 c. 88 to 90 b. 75 to 80 d. 68 to 70

Description : Milling a hundred pounds of wheat should yield ____ percent straight flour. a. 72 to 75 c. 88 to 90 b. 75 to 80 d. 68 to 70

Last Answer : a. 72 to 75

W yellow powder, mostly made of uranium, that is produced in the uranium milling process is called what?

Description : W yellow powder, mostly made of uranium, that is produced in the uranium milling process is called what?

Last Answer : ANSWER: YELLOWCAKE or AMMONIUM DIURANATE

State the equation of cutting speed for milling operation

Description : State the equation of cutting speed for milling operation

Last Answer : Ans: The equation for cutting speed for milling calculation is Where d = diameter of cutter(m) ,N= Cutter speed (RPM)

Differentiate between product layout and process layout on the basis of 1) Initial investment cost. 2) Cycle Time. 3) Types of machines used. 4) Skill of labour required. 5) Inventory level. 6) Arrangement of machine.

Description : Differentiate between product layout and process layout on the basis of 1) Initial investment cost. 2) Cycle Time. 3) Types of machines used. 4) Skill of labour required. 5) Inventory level. 6) Arrangement of machine. 

Last Answer : Parameter Product layout Process layout 1) Initial investment cost. It requires higher initial investment. Less initial investment 2) Cycle Time. Less cycle time for ... similar operation are grouped together to make a section, like lathe section, milling section etc.

How do scientists classify the parts of an ecosystem?

Description : How do scientists classify the parts of an ecosystem?

Last Answer : They classify it by a biotic things and an abiotic things.

How do scientists classify the parts of an ecosystem?

Description : How do scientists classify the parts of an ecosystem?

Last Answer : They classify it by a biotic things and an abiotic things.

The penetration of powered machines in various farm activities is assede in the range of .. to .. a. 40,30. c) 20,40 b. 50,10. d) 40,45

Description : The penetration of powered machines in various farm activities is assede in the range of .. to .. a. 40,30. c) 20,40 b. 50,10. d) 40,45

Last Answer : 40,45

Mechanisation in india at various levels can be done in following ways… a) by introducing the improved agricultural implements on small scale holding to be operated by bullocks. b) by using small tractors, tractor drawn machines and power tillers on medium holdings to supplement source. c) by using large scale tractor and machines on remaining holding to supplement animal power source. d) All of the above

Description : Mechanisation in india at various levels can be done in following ways a) by introducing the improved agricultural implements on small scale holding to be operated by bullocks. b) by using small ... tractor and machines on remaining holding to supplement animal power source. d) All of the above

Last Answer : All of the above