__________ extractor uses centrifugal force for separating the two phases. (A) Treybal (B) Scheibel (C) Podbielniak (D) None of these__________ extractor uses centrifugal force for separating the two phases. (A) Treybal (B) Scheibel (C) Podbielniak (D) None of these

__________ extractor uses centrifugal force for separating the two

phases.

(A) Treybal

(B) Scheibel

(C) Podbielniak

(D) None of these

by

1 Answer

Answer :

(C) Podbielniak


by

Related questions

Which of the following is the most suitable for extraction in a system having very low density difference? (A) Mixer-settler extractor (B) Centrifugal extractor (C) Pulsed extractor (D) Packed extraction tower

Description : Which of the following is the most suitable for extraction in a system having very low density difference? (A) Mixer-settler extractor (B) Centrifugal extractor (C) Pulsed extractor (D) Packed extraction tower

Last Answer : (B) Centrifugal extractor

Bollman extractor (A) Is a static bed leaching equipment (B) Is used for extraction of oil from oilseed (C) Is a centrifugal extractor (D) Employs only counter-current extraction

Description : Bollman extractor (A) Is a static bed leaching equipment (B) Is used for extraction of oil from oilseed (C) Is a centrifugal extractor (D) Employs only counter-current extraction

Last Answer : (B) Is used for extraction of oil from oilseed

Leaching of uranium ore and gold ore is done in (A) Centrifugal extractor (B) Pachuca tanks

Description : Leaching of uranium ore and gold ore is done in (A) Centrifugal extractor (B) Pachuca tanks

Last Answer : (B) Pachuca tanks

The basis of the technique of chromatography for separating components of a mixture is? A. the differing movement of particles of different mass in an electrical field B. the interaction of the components with a stationary and a mobile phases C. the absorption of infrared radiation by the components. D. the deflection of charged particles in a magnetic field.

Description : The basis of the technique of chromatography for separating components of a mixture is? A. the differing movement of particles of different mass in an electrical field B. the interaction of the ... infrared radiation by the components. D. the deflection of charged particles in a magnetic field. 

Last Answer : the interaction of the components with a stationary and a mobile phases

__________ diffusion is used for separating the isotopes of methane. (A) Thermal (B) Pressure (C) Concentration (D) Force

Description : __________ diffusion is used for separating the isotopes of methane. (A) Thermal (B) Pressure (C) Concentration (D) Force

Last Answer : (A) Thermal

Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Description : Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Last Answer : (B) Paraffins

__________ extractor is used for the concentration of radioactive nuclear waste. (A) Pulsed column (B) Sieve plate (C) Mixer-settler (D) Bollman

Description : __________ extractor is used for the concentration of radioactive nuclear waste. (A) Pulsed column (B) Sieve plate (C) Mixer-settler (D) Bollman

Last Answer : (A) Pulsed column

Operating principle of cyclone separator is based on the action of __________ dust particles. (A) Diffusion of (B) Centrifugal force on (C) Gravitational force on (D) Electrostatic force on

Description : Operating principle of cyclone separator is based on the action of __________ dust particles. (A) Diffusion of (B) Centrifugal force on (C) Gravitational force on (D) Electrostatic force on

Last Answer : (B) Centrifugal force on

Grizzlies are used for separating __________ solids. (A) Coarse (B) Fine (C) Any size (D) None of these

Description : Grizzlies are used for separating __________ solids. (A) Coarse (B) Fine (C) Any size (D) None of these

Last Answer : (B) Fine

Dryness fraction of wet steam is defined as the ratio of mass of vapour in the mixture to the mass of mixture __________ calorimeter is not used for measuring the dryness fraction of steam. (A) Bomb (B) Separating (C) Bucket (D) Throttling

Description : Dryness fraction of wet steam is defined as the ratio of mass of vapour in the mixture to the mass of mixture __________ calorimeter is not used for measuring the dryness fraction of steam. (A) Bomb (B) Separating (C) Bucket (D) Throttling

Last Answer : A) Bomb

__________ calorimeter is normally used for measuring the dryness fraction of steam, when it is very low. (A) Bucket (B) Throttling (C) Separating (D) A combination of separating & throttling

Description : __________ calorimeter is normally used for measuring the dryness fraction of steam, when it is very low. (A) Bucket (B) Throttling (C) Separating (D) A combination of separating & throttling

Last Answer : (D) A combination of separating & throttling

In a counter-current extractor, as the axial mixing increases, the extraction efficiency (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on the pressure of the system

Description : In a counter-current extractor, as the axial mixing increases, the extraction efficiency (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on the pressure of the system

Last Answer : (B) Decreases

Radioactive nuclear waste is treated in (A) Mixer-settler extractor (B) Rotating-disc contactor (C) Pulsed column extractor (D) Bollman extractor

Description : Radioactive nuclear waste is treated in (A) Mixer-settler extractor (B) Rotating-disc contactor (C) Pulsed column extractor (D) Bollman extractor

Last Answer : (C) Pulsed column extractor

In a counter-current liquid extractor (A) Both liquids flow at fixed rate (B) Both liquids can have any desired flow rate (C) Only one of the liquids may be pumped at any desired rate (D) Liquid’s flow rate depends upon the temperature and pressure

Description : In a counter-current liquid extractor (A) Both liquids flow at fixed rate (B) Both liquids can have any desired flow rate (C) Only one of the liquids may be pumped at any desired rate (D) Liquid’s flow rate depends upon the temperature and pressure

Last Answer : (C) Only one of the liquids may be pumped at any desired rate

Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be leached in either of Bollman extractor, Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Description : Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be ... , Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Last Answer : (A) Fine solids cannot be leached in a Pachuca tank

Desulphurisation of petrol is done in a(A) Bollman extractor (B) Rotating disc extractor (C) Packed extraction column (D) Plate type extraction column

Description : Desulphurisation of petrol is done in a(A) Bollman extractor (B) Rotating disc extractor (C) Packed extraction column (D) Plate type extraction column

Last Answer : (B) Rotating disc extractor

Do I need a welding fume extractor?

Description : Do I need a welding fume extractor?

Last Answer : It is a good idea to purchase and utlize a welding fume extractor. There are different types of welding fume extractors and brands available for purchase.

Where can I go to get a cheap welding fume extractor?

Description : Where can I go to get a cheap welding fume extractor?

Last Answer : Well, welding fume extractors aren't that cheap in general, but you're best hope is finding a used fume extractor, or to buy a new one online. A product search will show you the best fume extractors, although I would look for one under $1200.

Removing Broken Screws With an Extractor?

Description : Removing Broken Screws With an Extractor?

Last Answer : Broken screws are incredibly frustrating to remove, especially when it's just the screw head that's broken off. Fortunately, screw extractors make this process as clean and simple as possible. A screw ... turn it counter-clockwise. The broken screw should, with a little effort, begin to slide out.

Where can I buy a screw extractor?

Description : Where can I buy a screw extractor?

Last Answer : There are tons of places that you can buy the screw extractor from. Retail stores like Sears and Ace Hardware definitely has them. Amazon.com also have them available online.

How do you use a screw extractor?

Description : How do you use a screw extractor?

Last Answer : For a basic outline on how to use a screw extractor, you just basically punch the screw before drilling and make a small hole in the center of the screw. Insert the extract and rotate counter- ... the screw is free. For more detailed information, visit http://www.wikihow.com/Use-a-Screw-Extractor

When should I use a screw extractor?

Description : When should I use a screw extractor?

Last Answer : Absolutely you can use a screw extractor to help you remove a screw that has broken off below the surface and you have no alternative to remove them. Here is a website that walks you through the process. http://www.wikihow.com/Use-a-Screw-Extractor

Classify different methods used for extraction. Draw a labelled diagram of soxhelt extractor

Description : Classify different methods used for extraction. Draw a labelled diagram of soxhelt extractor

Last Answer : Methods Of Extraction:   a) Infusion b) Decoction c) Maceration d) Percolation e) Digestion Diagram of Soxhlet apparatus: 

If radius of a batch basket centrifuge is halved & the r.p.m. is doubled, then the (A) Linear speed of the basket is doubled (B) Linear speed of the basket is halved (C) Centrifugal force is doubled (D) Capacity of centrifuge is increased

Description : If radius of a batch basket centrifuge is halved & the r.p.m. is doubled, then the (A) Linear speed of the basket is doubled (B) Linear speed of the basket is halved (C) Centrifugal force is doubled (D) Capacity of centrifuge is increased

Last Answer : (C) Centrifugal force is doubled

The domestic refrigerator uses following type of compressor (a) centrifugal (b) axial (c) miniature sealed unit (d) piston type reciprocating

Description : The domestic refrigerator uses following type of compressor (a) centrifugal (b) axial (c) miniature sealed unit (d) piston type reciprocating

Last Answer : Ans: d

Mass transfer rate between two fluid phases does not necessarily depend on the __________ of the two phases. (A) Chemical properties (B) Physical properties (C) Degree of turbulence (D) Interfacial area

Description : Mass transfer rate between two fluid phases does not necessarily depend on the __________ of the two phases. (A) Chemical properties (B) Physical properties (C) Degree of turbulence (D) Interfacial area

Last Answer : (A) Chemical properties

Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Description : Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Last Answer : (C) Clapeyron

In case of absorption & stripping, the interface of the liquid & gas phases are present in equilibrium, when the diffusional resistance of __________ is zero. (A) Interface (B) Gas phase (C) Liquid phase (D) All 'a', 'b' & 'c'

Description : In case of absorption & stripping, the interface of the liquid & gas phases are present in equilibrium, when the diffusional resistance of __________ is zero. (A) Interface (B) Gas phase (C) Liquid phase (D) All 'a', 'b' & 'c'

Last Answer : (A) Interface

The temperature at which both liquid and gas phases are identical, is called the __________ point. (A) Critical (B) Triple (C) Freezing (D) Boiling

Description : The temperature at which both liquid and gas phases are identical, is called the __________ point. (A) Critical (B) Triple (C) Freezing (D) Boiling

Last Answer : (A) Critical

The point at which all the three (solid, liquid and gas) phases co-exist, is known as the __________ point. (A) Freezing (B) Triple (C) Boiling (D) Boyle

Description : The point at which all the three (solid, liquid and gas) phases co-exist, is known as the __________ point. (A) Freezing (B) Triple (C) Boiling (D) Boyle

Last Answer : B) Triple

For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

At __________ point, all the three phases (i.e. solid, liquid and gas) co exist. (A) Eutectic (B) Triple (C) Plait (D) Critical

Description : At __________ point, all the three phases (i.e. solid, liquid and gas) co exist. (A) Eutectic (B) Triple (C) Plait (D) Critical

Last Answer : (B) Triple

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Description : Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Last Answer : (B) 2 to 5°

Cyclones are used primarily for separating (A) Solids (B) Solids from fluids (C) Liquids (D) Solids from solids

Description : Cyclones are used primarily for separating (A) Solids (B) Solids from fluids (C) Liquids (D) Solids from solids

Last Answer : (B) Solids from fluids

Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Description : Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Last Answer : (B) Have very wide boiling points

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent for extractive distillation? (A) Cost (B) Availability(C) Toxicity(D) Selectivity

Description : Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent ... ? (A) Cost (B) Availability (C) Toxicity (D) Selectivity

Last Answer : (D) Selectivity

A refractory wall separating the stock and the source of heat is provided in a (A) Updraft kiln (B) Muffle furnace (C) Continuous furnace (D) None of these

Description : A refractory wall separating the stock and the source of heat is provided in a (A) Updraft kiln (B) Muffle furnace (C) Continuous furnace (D) None of these

Last Answer : (B) Muffle furnace

Crude oil is pumped by a __________ pump. (A) Gear (B) Centrifugal

Description : Crude oil is pumped by a __________ pump. (A) Gear (B) Centrifugal

Last Answer : (B) Centrifugal

The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Description : The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Last Answer : (A) Electromagnetic

For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Description : For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Last Answer : (C) Centrifugal

Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush(D) True centrifugal

Description : Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush (D) True centrifugal

Last Answer : (D) True centrifugal

Extraction of penicillin employs a __________ extraction column. (A) Centrifugal (B) Packed (C) Plate (D) None of these

Description : Extraction of penicillin employs a __________ extraction column. (A) Centrifugal (B) Packed (C) Plate (D) None of these

Last Answer : (A) Centrifugal

For pumping slurry, one can use a __________ pump. (A) Reciprocating (B) Diaphragm (C) Centrifugal (D) Pneumatic

Description : For pumping slurry, one can use a __________ pump. (A) Reciprocating (B) Diaphragm (C) Centrifugal (D) Pneumatic

Last Answer : (B) Diaphragm

For the production of very high vacuum, a __________ pump is normally used. (A) Diffusion (B) Centrifugal (C) Jet ejector (D) Piston

Description : For the production of very high vacuum, a __________ pump is normally used. (A) Diffusion (B) Centrifugal (C) Jet ejector (D) Piston

Last Answer : (A) Diffusion

Liquid delivery by centrifugal pump starts, only when the head developed by it is equal to the __________ head. (A) Manometric (B) Total (C) Static (D) Friction

Description : Liquid delivery by centrifugal pump starts, only when the head developed by it is equal to the __________ head. (A) Manometric (B) Total (C) Static (D) Friction

Last Answer : (A) Manometric

Specific speed of a centrifugal pump depends upon the __________ head. (A) Suction (B) Delivery (C) Manometric (D) None of these

Description : Specific speed of a centrifugal pump depends upon the __________ head. (A) Suction (B) Delivery (C) Manometric (D) None of these

Last Answer : (D) None of these

Boiler feed water pump is usually a __________ pump.(A) Reciprocating (B) Gear (C) Multistage centrifugal (D) Diaphragm

Description : Boiler feed water pump is usually a __________ pump. (A) Reciprocating (B) Gear (C) Multistage centrifugal (D) Diaphragm

Last Answer : (C) Multistage centrifugal

High specific speed of a pump implies that, it is a/an __________ pump. (A) Centrifugal (B) Mixed flow (C) Axial flow (D) None of these

Description : High specific speed of a pump implies that, it is a/an __________ pump. (A) Centrifugal (B) Mixed flow (C) Axial flow (D) None of these

Last Answer : (C) Axial flow