Is it possible to isolate pure staggered ethane or pure eclipsed ethane at room temperature? Explain .

Is it possible to isolate pure staggered ethane or pure eclipsed ethane at room temperature? Explain .
by

1 Answer

Answer :

The energy differences between staggered and eclipsed forms of ethane is just 12.55 kj mol_1 which is easily met by collisions of the molecules at room temperature. Therefore, it is not possible to isolate either pure staggered or pure eclipsed ethane at room temperature.
by

Related questions

The eclipsed and staggered forms of ethane are said to differ in __________. (a) molecular formula (b) configuration (c) conformation (d) constitution

Description : The eclipsed and staggered forms of ethane are said to differ in __________. (a) molecular formula (b) configuration (c) conformation (d) constitution

Last Answer : conformation

The eclipsed and staggered conformation of ethane is due to -

Description : The eclipsed and staggered conformation of ethane is due to -

Last Answer : The eclipsed and staggered conformation of ethane is due to - A. Free rotation about C-C single bond ... rotation about C-C bond D. None of the above

Explain the physical properties of benzene and its homologues.

Description : Explain the physical properties of benzene and its homologues.

Last Answer : Ans: i. Benzene and its homologous upto eight carbon atoms are colourless liquids with characteristic smell. ii. Aromatic hydrocarbons are immiscible with water but soluble in organic solvents. iii. ... compounds increases with increase in molecular mass due to increase in van der waals forces.

Explain why Grignard reagents do not reacts with alkanes.

Description : Explain why Grignard reagents do not reacts with alkanes.

Last Answer : Ans. In alkanes , the C – H bond has very little polarity . The hydrogen cannot be abstracted by the Grignard reagent.

Out of benzene, m–dinitrobenzene and toluene which will undergo nitration most easily and why?

Description : Out of benzene, m–dinitrobenzene and toluene which will undergo nitration most easily and why?

Last Answer : Ans. -CH3 group is electron donating while –NO2 group is electron withdrawing. Therefore, maximum electron density will be in toluene , followed by benzene and at least in m-dinitrobenzene. Therefore, the ease of nitration decreases in the order: Toluene> benzene> m-dinitrobenzene

Which one is more stable structure of benzene among Kekule and Dewar’s structures?

Description : Which one is more stable structure of benzene among Kekule and Dewar’s structures?

Last Answer : Ans: Kekule’s structure.

Define benzenoids Compounds.

Description : Define benzenoids Compounds.

Last Answer : Ans: Aromatic compounds containing benzene ring.

Define Aromatic Compounds.

Description : Define Aromatic Compounds.

Last Answer : Ans: The Compounds which gives pleasant smell.

What are alkanes? Why are they called paraffins?

Description : What are alkanes? Why are they called paraffins?

Last Answer : Ans. Those hydrocarbons which contain single bond between carbon- carbon are called alkanes. They are called paraffins because they are very less reactive (Latin- Parum= little, affins = affinity)

How will you separate propene from propyne?

Description : How will you separate propene from propyne?

Last Answer : Ans. By passing the mixture through ammonical silver nitrate solution when propyne reacts while propene passes over.

How will you demonstrate that double bonds of benzene are somewhat different from that of olefins?

Description : How will you demonstrate that double bonds of benzene are somewhat different from that of olefins?

Last Answer : Ans. The double bonds of olefins decolorize bromine water and discharge the pink colour of Bayer‘s reagent while those of benzene not.

What is Grignard reagent?

Description : What is Grignard reagent?

Last Answer : Ans. Alkyl magnesium halides

What is meant by restricted rotation around of carbon-carbon double bond? What type of isomerism does it lead to?

Description : What is meant by restricted rotation around of carbon-carbon double bond? What type of isomerism does it lead to?

Last Answer : Ans. The carbon-carbon double bond in alkene contains one sigma bond and one pi-bond. The Pibond involves the overlapping of unhybridised p orbital of two carbon atom .The rotation around the ... , the free rotation around C=C double bond is restricted, which gives rise to Geometrical Isomerism.

How will you detect the presence of unsaturation in an organic compound?

Description : How will you detect the presence of unsaturation in an organic compound?

Last Answer : Ans. Generally Unsaturated organic compound decolorize Bayer‘s reagent and Bromine water.

Arrange the following in order of decreasing reactivity towards alkanes. HCl, HBr, HI, HF

Description : Arrange the following in order of decreasing reactivity towards alkanes. HCl, HBr, HI, HF

Last Answer : Ans. HI> HBr> HCl >HF

Name two reagents which can be used to distinguish between ethene and ethyne.

Description : Name two reagents which can be used to distinguish between ethene and ethyne.

Last Answer : Ans. Tollen‘s reagent

Out of ethylene and acetylene which is more acidic and why?

Description : Out of ethylene and acetylene which is more acidic and why?

Last Answer : Ans. Acetylene, due to greater electonegativity of the sp hybridised carbon.

Arrange the following in the increasing order of C-C bond length- C2H6 , C2H4, C2H2

Description : Arrange the following in the increasing order of C-C bond length- C2H6 , C2H4, C2H2

Last Answer : Ans. C2H2 < C2H4 < C2H6

What effect does branching of an alkane chain has on its boiling point?

Description : What effect does branching of an alkane chain has on its boiling point?

Last Answer : Ans. As branching increases, the surface area of the molecule decreases which results in a small area of contact. As a result, the Van der Waals force also decreases which can be overcome at ... lower temperature. Hence, the boiling point of an alkane chain decreases with an increase in branching.

What are the necessary conditions for any system to be aromatic?

Description : What are the necessary conditions for any system to be aromatic?

Last Answer : Ans. A compound is said to be aromatic if it satisfies the following three conditions: (i) It should have a planar structure. (ii) The π-electrons of the compound are completely delocalized in the ring. (iii)The total number ... to (4n + 2), where n = 0, 1, 2 etc. This is known as Huckel s rule.

What are the main constituent of LPG?

Description : What are the main constituent of LPG?

Last Answer : Ans. Butane and isobutane . Both these isomers can be easily liquified and hence can be conveniently transported in iron cylinder.

Which of the following has highest boiling point and why?(L-II) (a) 2 methylpentane (b) 2,3 dimethyl butane (c) 2,2 dimythylbutane

Description : Which of the following has highest boiling point and why?(L-II) (a) 2 methylpentane (b) 2,3 dimethyl butane (c) 2,2 dimythylbutane

Last Answer : Ans. As the branching increases, surface area decreases. As a result, magnitude of Vander Waals forces of attraction decreases and hence the boiling point decreases. Thus, the overall order of decreasing boiling point is: 2 methylpentane (333k) > 2,3 dimethylbutane (331k) > 2,2 dimethylbutane(323k)

Why do the C-C bonds rather than C-H bonds break during cracking of alkanes?

Description : Why do the C-C bonds rather than C-H bonds break during cracking of alkanes?

Last Answer : Ans. Since the bond dissociation energy of C-C bonds (348kj /mol) is lower than bond dissociation energy of C-H bonds (414kj/mol), therefore, during cracking of alkanes, C-C bonds break more early than C-H bonds.

(a) What effect the branching of an alkane has on its melting point? (L-III) (b) Which of the following has highest boiling point?(L-III) (1) 2-methyl pentane. (2) 2, 3-diethyl butane. (3) 2, 2- dimethyl butane.

Description : (a) What effect the branching of an alkane has on its melting point? (L-III) (b) Which of the following has highest boiling point?(L-III) (1) 2-methyl pentane. (2) 2, 3-diethyl butane. (3) 2, 2- dimethyl butane.

Last Answer : Ans.(a) In general conception, as the branching increases packing of the molecules in the crystals becomes less close and have melting point decreases accordingly. (b) As the branching increases, ... attraction decreases and hence the boiling point decreases. So, 2-methyl pentane has highest B.pt.

Arrange the three isomers of pentane in increasing order of their boiling points?

Description : Arrange the three isomers of pentane in increasing order of their boiling points?

Last Answer : Ans.2, 2-Dimethylpropane

What do you mean by pyrolysis?

Description : What do you mean by pyrolysis?

Last Answer : The decomposition of a compound by the heat is called pyrolysis. This process when applied to alkanes is known as cracking.

Why are alkanes called paraffins?

Description : Why are alkanes called paraffins?

Last Answer : Paraffin’s means little affinity; alkanes due to strong C-C and C-H bonds are relatively chemically inert.

What are conformations?

Description : What are conformations?

Last Answer : Conformations are spatial arrangements which are obtained by rotation around sigma bonds.

A young girl, Violet by name, was visiting with a group of her schoolmates at a friend’s house. The air was filled with the noise of loud conversations, when an older woman called out for silence. She then asked one of the girls in attendance to remove something from a black bag she was holding. The older woman then announced, “Violet, you have the honor of being first!” Violet was then ushered to the center of the room where the older woman pushed a body part of an animal into Violet’s hand. Suddenly, everything went dark for the young girl. Violet began to feel dizzy, and felt someone’s hands on her. She then felt a slight push. As Violet staggered forward in the darkness, the loud chanting and shouting increased around her. Finally, Violet’s hand bumped into something which, when the da

Description : A young girl, Violet by name, was visiting with a group of her schoolmates at a friend's house. The air was filled with the noise of loud conversations, when an older woman called out for ... and shouting increased around her. Finally, Violet's hand bumped into something which, when the da -Riddles

Last Answer : Violet was at a birthday party, and was selected to be first in the Pin the Tail on the Donkey game they were playing. She was successful in pinning the tail just where it belonged. The body part of the animal was, of course, the donkey’s tail.

(3) prevents freezing of petrol Explanation: Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound widely used as an automotive antifreeze and a precursor to polymers. In its pure form, it is an odorless, colourless, syrupy, sweettasting liquid. Ethylene glycol is toxic, and ingestion can result in death. Due to its low freezing point ethylene glycol resists freezing. A mixture of 60% ethylene glycol and 40% water freezes at -45 degree C (- 49 degree F).

Description : (3) prevents freezing of petrol Explanation: Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound widely used as an automotive antifreeze and a precursor to polymers. In its pure form, it is ... A mixture of 60% ethylene glycol and 40% water freezes at -45 degree C (- 49 degree F).

Last Answer : Rust is - (1) A mixture of Fe₂O₃ and Fe(OH) ₂ (2) A mixture of FeO and Fe(OH)₂ (3) FeO only (4) A mixture of Fe₂O₃, 3H₂O and FeO

When a disciplinary action is necessary with a preschool child, the least acceptable technique would generally be Options: A) To isolate him by sending him to his room B) To take away some of his privileges C) To scold him D) To make him feel sorry for having hurt your feelings

Description : When a disciplinary action is necessary with a preschool child, the least acceptable technique would generally be Options: A) To isolate him by sending him to his room B) To take away some of his privileges C) To scold him D) To make him feel sorry for having hurt your feelings

Last Answer : D) To make him feel sorry for having hurt your feelings

The gas that causes suffocation and death when coal or coke is burnt in a closed room is - (1) Methane (2) Ethane (3) Carbon monoxide (4) Carbon dioxide

Description : The gas that causes suffocation and death when coal or coke is burnt in a closed room is - (1) Methane (2) Ethane (3) Carbon monoxide (4) Carbon dioxide

Last Answer : (3) Carbon monoxide Explanation: Exhaust fumes of motor cars, gases produced, from coal fire in a closed room and coal gas, all contain carbon monoxide, which is the cause of their ... is stable compound. This causes oxygen starvation in the body tissues and eventually causes death by suffocation.

The gas that causes suffocation and death when coal or coke is burnt in a closed room is (1) Methane (2) Ethane (3) Carbon monoxide (4) Carbon di–oxide

Description : The gas that causes suffocation and death when coal or coke is burnt in a closed room is (1) Methane (2) Ethane (3) Carbon monoxide (4) Carbon di–oxide

Last Answer : Carbon monoxide

Would traffic flow better if rush hour was staggered from schools and businesses?

Description : Would traffic flow better if rush hour was staggered from schools and businesses?

Last Answer : How the heck would you do that? People who work have kids. As it is, it’s hard enough to get the kids to school, get to work, and get home at a reasonable hour.

An alternator will fail to produce line voltage as a result of _____________. A. a closed circuit breaker B. oxidized slip rings C. improperly staggered brushes D. exciter generator failure

Description : An alternator will fail to produce line voltage as a result of _____________. A. a closed circuit breaker B. oxidized slip rings C. improperly staggered brushes D. exciter generator failure

Last Answer : Answer: D

The direction of rotation of a DC propulsion motor can be changed by reversing the _____________. A. brush holder position B. polarity of the field poles C. brush staggered order D. motor interpole connections

Description : The direction of rotation of a DC propulsion motor can be changed by reversing the _____________. A. brush holder position B. polarity of the field poles C. brush staggered order D. motor interpole connections

Last Answer : Answer: B

The distance between the centres of adjacent rivets in the same row, is called (A) Pitch (B) Lap (C) Gauge (D) Staggered pitch

Description : The distance between the centres of adjacent rivets in the same row, is called (A) Pitch (B) Lap (C) Gauge (D) Staggered pitch

Last Answer : (A) Pitch

If the rivets in adjacent rows are staggered and outermost row has only one rivet, the arrangement of the rivets, is called (A) Chain riveting (B) Zig-zag riveting (C) Diamond riveting (D) None of these

Description : If the rivets in adjacent rows are staggered and outermost row has only one rivet, the arrangement of the rivets, is called (A) Chain riveting (B) Zig-zag riveting (C) Diamond riveting (D) None of these

Last Answer : (C) Diamond riveting

The most economical lighting layout which is suitable for narrow roads is (A) Single side lighting (B) Staggered system (C) Central lighting system (D) None of the above

Description : The most economical lighting layout which is suitable for narrow roads is (A) Single side lighting (B) Staggered system (C) Central lighting system (D) None of the above

Last Answer : Answer: Option A

It has Staggered pegs in two rows at Spacing. A. 100 mm. C. 400 mm B. 200 mm D. 50 mm

Description : It has Staggered pegs in two rows at Spacing. A. 100 mm. C. 400 mm B. 200 mm D. 50 mm

Last Answer : 200 mm

Why are splices staggered on multiconductor cables?

Description : Why are splices staggered on multiconductor cables?

Last Answer : To prevent the joint from being bulky.

The typical feature of information-rich classroom lecture is in the nature of being (A) Sedentary (B) Staggered (C) Factual (D) Sectoral

Description : The typical feature of information-rich classroom lecture is in the nature of being (A) Sedentary (B) Staggered (C) Factual (D) Sectoral

Last Answer : (C) Factual 

Pure nickel is (A) Ferromagnetic above its curie point (i.e., 415°C)(B) Having h.c.p. crystal lattice(C) Ferromagnetic at room temperature(D) Not resistant to oxidation at high temperature

Description : Pure nickel is (A) Ferromagnetic above its curie point (i.e., 415°C) (B) Having h.c.p. crystal lattice (C) Ferromagnetic at room temperature (D) Not resistant to oxidation at high temperature

Last Answer : (C) Ferromagnetic at room temperature

Why do I want to isolate myself?

Description : Why do I want to isolate myself?

Last Answer : Welcome to Fluther. In all seriousness, and since you already know that you suffer from depression - for which I hope you are receiving some medical treatment; are you? - I would suggest that you discuss these ... . And I hope that you won't. Talk to your doctor. Life should not be so miserable.

How do I isolate the last image in the following site in order to post an OP about it?

Description : How do I isolate the last image in the following site in order to post an OP about it?

Last Answer : Right click the image you want and click “view this image” from the menu. It will open it up in another tab and you can copy the link and post it here.

What are the steps to isolate x in this equation?

Description : What are the steps to isolate x in this equation?

Last Answer : answer:y^x = x^y xln(y) = yln(x) x/ln(x) = y/ln(y) Edit: whoops, I didn’t read thoroughly. You want only one x, not x’s and y’s separated. Sorry about that. It’s not always possible to isolate a variable in an equation, so that could possibly be the case here.

Isolate bad hard drive sectors?

Description : Isolate bad hard drive sectors?

Last Answer : answer:Run scandisk from the tools tab in the gui. ensure you check the box for recovering data from bad sectors. At a command line you can set this to run on the C: drive at boot up via the “CHKDSK” command. Use the /F /R switchs to fix and repair.

How do I isolate X in this equation?

Description : How do I isolate X in this equation?

Last Answer : You’ve only got half the answer I’m afraid. x= -1.618 is also a solution (in fact x= 0.618 and -1.618 at the same time).

How do they isolate a single sound source from a crowd?

Description : How do they isolate a single sound source from a crowd?

Last Answer : It depends on how the audio master panned the sound when he or she was mixing it down as to how successful you might be with most over-the-counter equipment. What kind of recording equipment are you talking about?

Considering melatonin for sleep aid. Any advantage in a complex, or is the isolate okay?

Description : Considering melatonin for sleep aid. Any advantage in a complex, or is the isolate okay?

Last Answer : Basic melatonin works for some people who are lacking in sleep. i personally believe that using one 25 mg. of anitihistimine, 30 minutes before bedtime, works much better. and, its much cheaper than melatonin, if you buy the generic brand at WalMart.