Flights in a rotary dryer are provided to (A) Lift and shower the solids thus exposing it thoroughly to the drying action of the gas (B) Reduce the residence time of solid (C) Increase the residence time of the solid (D) None of these

Flights in a rotary dryer are provided to
(A) Lift and shower the solids thus exposing it thoroughly to the drying
action of the gas
(B) Reduce the residence time of solid
(C) Increase the residence time of the solid
(D) None of these
by

1 Answer

Answer :

(A) Lift and shower the solids thus exposing it thoroughly to the drying
action of the gas
by

Related questions

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

For continuous drying of granular or crystalline material, the dryer used is the __________ dryer.(A) Tunnel (B) Tray (C) Rotary (D) None of these

Description : For continuous drying of granular or crystalline material, the dryer used is the __________ dryer. (A) Tunnel (B) Tray (C) Rotary (D) None of these

Last Answer : (C) Rotary

Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Description : Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Last Answer : (D) Truck/tunnel

Large scale drying of sugar is done in a __________ dryer. (A) Spouted bed (B) Tray (C) Rotary (D) Truck

Description : Large scale drying of sugar is done in a __________ dryer. (A) Spouted bed (B) Tray (C) Rotary (D) Truck

Last Answer : (C) Rotary

Large scale drying of wheat is done in a __________ dryer. (A) Fluidised bed (B) Spouted bed (C) Tray (D) Vacuum rotary

Description : Large scale drying of wheat is done in a __________ dryer. (A) Fluidised bed (B) Spouted bed (C) Tray (D) Vacuum rotary

Last Answer : (B) Spouted bed

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

A slurry is to be dried to produce flaky solid. Which dryer would you recommend? (A) Spray dryer (B) Drum dryer (C) Rotary dryer (D) Dielectric drye

Description : A slurry is to be dried to produce flaky solid. Which dryer would you recommend? (A) Spray dryer (B) Drum dryer (C) Rotary dryer (D) Dielectric drye

Last Answer : (A) Spray dryer

A low mold board with gradual twist that completely invert the furrow slice with a minimum of breakup, thus covering vegetative matter thoroughly is called a. Stubble bottom b. sod bottom c. salted mould board d. general purpose bottom

Description : A low mold board with gradual twist that completely invert the furrow slice with a minimum of breakup, thus covering vegetative matter thoroughly is called a. Stubble bottom b. sod bottom c. salted mould board d. general purpose bottom

Last Answer : b. sod bottom

A long jow mould board with a gradual twist (spiral) that completely inverts the furrow slice with a minimum of break up thus covering vegetative matter thoroughly is called a. Sod bottom b. Stubble bottom c. General bottom d. Slat bottom

Description : A long jow mould board with a gradual twist (spiral) that completely inverts the furrow slice with a minimum of break up thus covering vegetative matter thoroughly is called a. Sod bottom b. Stubble bottom c. General bottom d. Slat bottom

Last Answer : a. Sod bottom

Irrespective of the type, all laxatives exert the following action: A. Increase the content of solids in the faeces B. Increase the water content of faeces C. Reduce absorption of nutrients D. Increase intestinal motility

Description : Irrespective of the type, all laxatives exert the following action: A. Increase the content of solids in the faeces B. Increase the water content of faeces C. Reduce absorption of nutrients D. Increase intestinal motility

Last Answer : B. Increase the water content of faeces

The nurse teaching the patient with a cast about home care includes which of the following instructions? a) Dry a wet fiberglass cast thoroughly using a hair dryer on a cool setting to avoid skin problems. Instruct the patient to keep the cast dry and to dry a wet fiberglass cast thoroughly using a hair dryer on a cool setting to avoid skin problems; do not cover it with plastic or rubber.

Description : The nurse teaching the patient with a cast about home care includes which of the following instructions? a) Dry a wet fiberglass cast thoroughly using a hair dryer on a cool setting to avoid skin ... A broken cast should be reported to the physician; the patient should not attempt to fix it.

Last Answer : a) Dry a wet fiberglass cast thoroughly using a hair dryer on a cool setting to avoid skin problems. Instruct the patient to keep the cast dry and to dry a wet fiberglass cast thoroughly using a hair dryer on a cool setting to avoid skin problems; do not cover it with plastic or rubber.

With increase in the mass velocity of the gas, the rate of drying during the constant rate period __________, if the conduction and radiation through the solid are negligible. (A) Increases (B) Decreases (C) Remain same

Description : With increase in the mass velocity of the gas, the rate of drying during the constant rate period __________, if the conduction and radiation through the solid are negligible. (A) Increases (B) Decreases (C) Remain same

Last Answer : (A) Increases

After you get out of a shower or a bath, do you dry yourself off thoroughly before putting clothes back on?

Description : After you get out of a shower or a bath, do you dry yourself off thoroughly before putting clothes back on?

Last Answer : I try to remove any and all standing water. My skin may still be damp and my hair is wet when I get dressed. If any major amounts of water remain it’s hard to put the clothes back on and then there’s cold wet spots in your clothing to contend with.

Capacity of a rotary dryer depends on its (A) rpm (B) Inclination with ground surface (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Capacity of a rotary dryer depends on its (A) rpm (B) Inclination with ground surface (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Sticky material can be dried in a __________ dryer. (A) Tray (B) Rotary (C) Fluidised bed (D) None of these

Description : Sticky material can be dried in a __________ dryer. (A) Tray (B) Rotary (C) Fluidised bed (D) None of these

Last Answer : (A) Tray

Calcium ammonium nitrate (a fertiliser) is dried in a __________ dryer. (A) Rotary (B) Vacuum (C) Tunnel (D) Tray

Description : Calcium ammonium nitrate (a fertiliser) is dried in a __________ dryer. (A) Rotary (B) Vacuum (C) Tunnel (D) Tray

Last Answer : (A) Rotary

Milk is dried usually in a __________ dryer. (A) Freeze (B) Spray (C) Tray (D) Rotary

Description : Milk is dried usually in a __________ dryer. (A) Freeze (B) Spray (C) Tray (D) Rotary

Last Answer : (B) Spray

Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Description : Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Last Answer : (B) Mechanical draft cooling tower

Dried finished product sampled from various parts of a __________ dryer exhibits non-uniformity in the moisture content. (A) Rotary (B) Tray (C) Freeze (D) None of these

Description : Dried finished product sampled from various parts of a __________ dryer exhibits non-uniformity in the moisture content. (A) Rotary (B) Tray (C) Freeze (D) None of these

Last Answer : (B) Tray

Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray

Description : Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray

Last Answer : (B) Through circulation

Vacuum is applied in __________ zone, in case of a general type continuous rotary drum vacuum filter(A) Filtering(B) Washing(C) Drying(D) All (A), (B) & (C).

Description : Vacuum is applied in __________ zone, in case of a general type continuous rotary drum vacuum filter. (A) Filtering (B) Washing (C) Drying (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Description : For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Last Answer : (B) 10-60

__________ is a non volatile film forming constituent of a paint. (A) Thinner (B) Dryer (C) Drying oil (D) None of these

Description : __________ is a non volatile film forming constituent of a paint. (A) Thinner (B) Dryer (C) Drying oil (D) None of these

Last Answer : (C) Drying oil

Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Description : Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Last Answer : (B) Reduce drying temperature

The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Description : The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Last Answer : (B) Increasing temperatures both on the surface and within the solid

Which of the following is true in relation to dental decay? A. Foods that require vigorous mastication will increase salivary flow and reduce PH B. Tooth brushing immediately after meals is most effective because demineralisation has already started C. Food that encourage the mastication will increase the number of lymphocytes in saliva and thus reduce decay D. Vigorous mastication will increase plaque PH and lead to reduce of decays E. The Stephan Curve describes an increase in PH during a meal with resultant of demineralisation

Description : Which of the following is true in relation to dental decay? A. Foods that require vigorous mastication will increase salivary flow and reduce PH B. Tooth brushing immediately after meals is most ... E. The Stephan Curve describes an increase in PH during a meal with resultant of demineralisation

Last Answer : E. The Stephan Curve describes an increase in PH during a meal with resultant of demineralisation

Half life period of a chemical reaction is (A) The time required to reduce the concentration of the reacting substance to half its initial value (B) Half of the space time of a reaction (C) Half of the residence time of a reaction (D) None of these

Description : Half life period of a chemical reaction is (A) The time required to reduce the concentration of the reacting substance to half its initial value (B) Half of the space time of a reaction (C) Half of the residence time of a reaction (D) None of these

Last Answer : (A) The time required to reduce the concentration of the reacting substance to half its initial value

For __________ drying, the effects of velocity, temperature and humidity of the gas and the thickness of the solid are the same. (A) Unsaturated surface (B) Constant rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For __________ drying, the effects of velocity, temperature and humidity of the gas and the thickness of the solid are the same. (A) Unsaturated surface (B) Constant rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

The dry density of soil is a) Always greater than the saturated density b) Weight of soil solids per unit of total volume prior to drying* c) Total weight of soil solids per unit of its total volume d) Total weight of soil mass per unit of its total volume

Description : The dry density of soil is a) Always greater than the saturated density b) Weight of soil solids per unit of total volume prior to drying* c) Total weight of soil solids per unit of its total volume d) Total weight of soil mass per unit of its total volume

Last Answer : b) Weight of soil solids per unit of total volume prior to drying*

How do I keep my dryer door from popping open during drying?

Description : How do I keep my dryer door from popping open during drying?

Last Answer : If you are having problems keeping your dryer door shut when the dryer is running, you want to check the door latch (or latches) along the inside of the door. One or more of these latches ... to be replaced. Replacement is a simple process and latches can typically be found at local hardware stores.

The basic function of air dryer in a compressor is: a. prevent dust from entering compressor b. storage and smoothening pulsating air output c. reduce the temperature of the air before it enters the next state to increase efficiency d. to remove remaining traces of moisture after after-cooler

Description : The basic function of air dryer in a compressor is: a. prevent dust from entering compressor b. storage and smoothening pulsating air output c. reduce the temperature of the air before it enters the next state to increase efficiency d. to remove remaining traces of moisture after after-cooler 

Last Answer : d. to remove remaining traces of moisture after after-cooler 

To maintain altitude, what must be done as Indicated Airspeeed (IAS) is reduced? a. Decrease angle of attack to reduce the drag b. Increase angle of attack to maintain the correct lift force c. Deploy the speed brakes to increase drag d. Reduce thrust

Description : To maintain altitude, what must be done as Indicated Airspeeed (IAS) is reduced? a. Decrease angle of attack to reduce the drag b. Increase angle of attack to maintain the correct lift force c. Deploy the speed brakes to increase drag d. Reduce thrust

Last Answer : b. Increase angle of attack to maintain the correct lift force

The following statement(s) is/are true concerning initial microbiologic diagnostic techniques. a. Appropriate expeditious transport of specimens to the microbiology laboratory is essential for obtaining accurate clinical information b. The use of potassium hydroxide in preparing a specimen slide for light microscopy will be useful in identification of anaerobic bacteria c. Antibiotic sensitivity is determined by exposing the specific microorganism to varying amounts of antibiotic with the concentration of the antibiotic inhibiting growth referred to as the MIC (minimal inhibitory concentration) d. Serum levels of antimicrobial agents should achieve in excess of a 4-to 8-fold increase over the MIC to be considered clinically efficacious.

Description : The following statement(s) is/are true concerning initial microbiologic diagnostic techniques. a. Appropriate expeditious transport of specimens to the microbiology laboratory is essential for obtaining accurate ... a 4-to 8-fold increase over the MIC to be considered clinically efficacious.

Last Answer : Answer: a, c, d Because most surgical infections are polymicrobial, specimens should be cultured for aerobic and anaerobic bacteria, as well as fungi. Although aerobic and aerotolerant ... fold increase over MIC during the peak serum level have been demonstrated to be clinically efficacious

What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Description : What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Last Answer : B. A solute and a solvent

A carpenter built a new house on some property he owned. When he went to inspect his new house, he observed a large animal had taken up residence in the new house. However, the carpenter was not surprised by this. He made no attempt to chase the large animal from the house, nor did he call animal control to have the animal removed. In fact, he provided food and water to the animal on an ongoing basis at his own expense. Why wasn't the carpenter upset about the animal living in his newly built house? -Riddles

Description : A carpenter built a new house on some property he owned. When he went to inspect his new house, he observed a large animal had taken up residence in the new house. However, the carpenter was ... own expense. Why wasn't the carpenter upset about the animal living in his newly built house? -Riddles

Last Answer : The new house the carpenter had just built was a dog house. He built it for the new dog he had just purchased ----- a massive Saint Bernard.

Pick up the incorrect statement from the following: (A) In dog-legged stairs, no space between its flights is provided (B) In open newel stair, a rectangular well is provided (C) In geometric stair, a curved shaped well between forward and backward flights, is provided (D) In geometrical stair, two quarter space landing is provided

Description : Pick up the incorrect statement from the following: (A) In dog-legged stairs, no space between its flights is provided (B) In open newel stair, a rectangular well is provided (C) In ... forward and backward flights, is provided (D) In geometrical stair, two quarter space landing is provided

Last Answer : Answer: Option D

Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Description : Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Last Answer : (C) 0.01

`SO_(2)` gas can be identified by exposing it to the

Description : `SO_(2)` gas can be identified by exposing it to the

Last Answer : `SO_(2)` gas can be identified by exposing it to the A. Glass rod dippend in conc HCl B. ... acetate solution D. Glass rod dippend in `NH_(4)OH`

Visco-elastic behaviour of materials which is time dependent is common in (A) Plastics (B) Crystalline solid (C) Non-crystalline solids (D) Non-crystalline organic polymer

Description : Visco-elastic behaviour of materials which is time dependent is common in (A) Plastics (B) Crystalline solid (C) Non-crystalline solids (D) Non-crystalline organic polymer

Last Answer : (D) Non-crystalline organic polymer

The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Description : The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Last Answer : (B) T

The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Description : The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Last Answer : (C) T

The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Last Answer : (A) 3.6 AVS.ρ

Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maxi-mum equilibrium moisture? (A) Anthracite coal (B) Rag paper (C) Bamboo (D) Inorganic solids

Description : Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maxi-mum equilibrium moisture? (A) Anthracite coal (B) Rag paper (C) Bamboo (D) Inorganic solids

Last Answer : (C) Bamboo

A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Description : A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Last Answer : (B) 24000

Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Description : Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Last Answer : (B) In sedimentation tanks equipped with mechanical scrapper