Sticky material can be dried in a __________ dryer. (A) Tray (B) Rotary (C) Fluidised bed (D) None of these

Sticky material can be dried in a __________ dryer.
(A) Tray
(B) Rotary
(C) Fluidised bed
(D) None of these
by

1 Answer

Answer :

(A) Tray
by

Related questions

Large scale drying of wheat is done in a __________ dryer. (A) Fluidised bed (B) Spouted bed (C) Tray (D) Vacuum rotary

Description : Large scale drying of wheat is done in a __________ dryer. (A) Fluidised bed (B) Spouted bed (C) Tray (D) Vacuum rotary

Last Answer : (B) Spouted bed

Calcium ammonium nitrate (a fertiliser) is dried in a __________ dryer. (A) Rotary (B) Vacuum (C) Tunnel (D) Tray

Description : Calcium ammonium nitrate (a fertiliser) is dried in a __________ dryer. (A) Rotary (B) Vacuum (C) Tunnel (D) Tray

Last Answer : (A) Rotary

Milk is dried usually in a __________ dryer. (A) Freeze (B) Spray (C) Tray (D) Rotary

Description : Milk is dried usually in a __________ dryer. (A) Freeze (B) Spray (C) Tray (D) Rotary

Last Answer : (B) Spray

Dried finished product sampled from various parts of a __________ dryer exhibits non-uniformity in the moisture content. (A) Rotary (B) Tray (C) Freeze (D) None of these

Description : Dried finished product sampled from various parts of a __________ dryer exhibits non-uniformity in the moisture content. (A) Rotary (B) Tray (C) Freeze (D) None of these

Last Answer : (B) Tray

Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray

Description : Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray

Last Answer : (B) Through circulation

Large scale drying of sugar is done in a __________ dryer. (A) Spouted bed (B) Tray (C) Rotary (D) Truck

Description : Large scale drying of sugar is done in a __________ dryer. (A) Spouted bed (B) Tray (C) Rotary (D) Truck

Last Answer : (C) Rotary

Sand is dried in foundries in a _________drier. (A) Rotary (B) Fluidised bed (C) Vacuum (D) Spray

Description : Sand is dried in foundries in a _________drier. (A) Rotary (B) Fluidised bed (C) Vacuum (D) Spray

Last Answer : (B) Fluidised bed

For continuous drying of granular or crystalline material, the dryer used is the __________ dryer.(A) Tunnel (B) Tray (C) Rotary (D) None of these

Description : For continuous drying of granular or crystalline material, the dryer used is the __________ dryer. (A) Tunnel (B) Tray (C) Rotary (D) None of these

Last Answer : (C) Rotary

Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Description : Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Last Answer : (D) Truck/tunnel

Refractory bricks are usually dried in a __________ dryer. (A) Tray (B) Tunnel (C) Conveyor (D) Festoon

Description : Refractory bricks are usually dried in a __________ dryer. (A) Tray (B) Tunnel (C) Conveyor (D) Festoon

Last Answer : (B) Tunnel

Heat sensitive materials like certain pharmaceuticals and food stuffs can be dried in a/an __________ dryer. (A) Indirect tray (B) Spray (C) Freeze (D) None of these

Description : Heat sensitive materials like certain pharmaceuticals and food stuffs can be dried in a/an __________ dryer. (A) Indirect tray (B) Spray (C) Freeze (D) None of these

Last Answer : (C) Freeze

Paper industry employs __________ driers.(A) Cylinder (B) Rotary (C) Spray (D) Fluidised bed

Description : Paper industry employs __________ driers. (A) Cylinder (B) Rotary (C) Spray (D) Fluidised bed

Last Answer : (A) Cylinder

Calcination of limestone is not done in a __________ kiln for producing lime. (A) Vertical shaft (B) Rotary (C) Fluidised bed (D) Fixed bed

Description : Calcination of limestone is not done in a __________ kiln for producing lime. (A) Vertical shaft (B) Rotary (C) Fluidised bed (D) Fixed bed

Last Answer : (D) Fixed bed

A slurry is to be dried to produce flaky solid. Which dryer would you recommend? (A) Spray dryer (B) Drum dryer (C) Rotary dryer (D) Dielectric drye

Description : A slurry is to be dried to produce flaky solid. Which dryer would you recommend? (A) Spray dryer (B) Drum dryer (C) Rotary dryer (D) Dielectric drye

Last Answer : (A) Spray dryer

Give the principle and working of Fluidised bed dryer.

Description : Give the principle and working of Fluidised bed dryer.

Last Answer : Principle: In FBD, good contact between hot air and particles to be dried is obtained which cause rapid drying. Working of Fluidised bed dryer: Two types of FBD are used in pharmaceutical industry. There are ... ranging from 5 kg to 200 kg with an average drying time of about 20-40 min.

Write the advantages and disadvantages of fluidised bed dryer.

Description : Write the advantages and disadvantages of fluidised bed dryer. 

Last Answer : Advantages: i. It give high drying rate. ii. Suitable for thermolabile material. iii. Drying takes place of individual particles. iv. Temperature can be controlled. v. Prevent the ... : i. Turbulence produces cause attrition of particles. ii. Movement can generate electrical charges. 

Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Description : Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Last Answer : p. For operating on the sides of plant bed

Detergent solution is dried to a powder in a (A) Spray dryer (B) Spouted bed dryer

Description : Detergent solution is dried to a powder in a (A) Spray dryer (B) Spouted bed dryer

Last Answer : (A) Spray dryer

Rotary dryers cannot handle __________ materials. (A) Free flowing (B) Dry (C) Sticky (D) Granular

Description : Rotary dryers cannot handle __________ materials. (A) Free flowing (B) Dry (C) Sticky (D) Granular

Last Answer : (C) Sticky

Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Description : Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Last Answer : (A) Rotary

In paper industry, paper is dried in a __________ dryer. (A) Tunnel (B) Heated cylinder (C) Conveyor (D) Festoon

Description : In paper industry, paper is dried in a __________ dryer. (A) Tunnel (B) Heated cylinder (C) Conveyor (D) Festoon

Last Answer : (B) Heated cylinder

Thermofor catalytic cracking process is a __________ process. (A) Fixed bed (B) Moving bed (C) Fluidised bed (D) Non-catalytic

Description : Thermofor catalytic cracking process is a __________ process. (A) Fixed bed (B) Moving bed (C) Fluidised bed (D) Non-catalytic

Last Answer : (D) Non-catalytic

Platforming is a __________ process. (A) Moving bed (B) Fluidised bed (C) Non-regenerative & fixed bed (D) Regenerative

Description : Platforming is a __________ process. (A) Moving bed (B) Fluidised bed (C) Non-regenerative & fixed bed (D) Regenerative

Last Answer : (C) Non-regenerative & fixed bed

Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an __________ bed gasifier. (A) Entrained (B) Moving (C) Fixed (D) Fluidised

Description : Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an __________ bed gasifier. (A) Entrained (B) Moving (C) Fixed (D) Fluidised

Last Answer : (A) Entrained

Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Description : Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Last Answer : (B) Greater than

For a fluidised bed reactor, the most suitable/relevant model is a __________ model. (A) Tank in series (B) Bubbling bed (C) Plug flow (D) None of these

Description : For a fluidised bed reactor, the most suitable/relevant model is a __________ model. (A) Tank in series (B) Bubbling bed (C) Plug flow (D) None of these

Last Answer : (B) Bubbling bed

For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Description : For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Last Answer : (B) Fluidised bed reactor followed by a fixed

Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Description : Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Last Answer : (B) Slurry

. Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : . Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

Heat transfer by __________ is almost absent in case of fluidised bed drying operation. (A) Radiation (B) Conduction (C) Convection (D) Both (B) & (C)

Description : Heat transfer by __________ is almost absent in case of fluidised bed drying operation. (A) Radiation (B) Conduction (C) Convection (D) Both (B) & (C)

Last Answer : A) Radiation

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

Large tonnage of refractory bricks are dried in a (A) Shaft furnace (B) Rotary hearth furnace (C) Tunnel kiln (D) Muffle furnace

Description : Large tonnage of refractory bricks are dried in a (A) Shaft furnace (B) Rotary hearth furnace (C) Tunnel kiln (D) Muffle furnace

Last Answer : (C) Tunnel kiln

Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Description : Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Last Answer : i)Tray dryer:   ii)Plate column:    iii)Packed column:   iv) Jaw crusher:   v) Stirrer:   vi) Ball mill  

Explain construction and application of tray dryer.

Description : Explain construction and application of tray dryer.

Last Answer : Construction of tray dryer.   The simplest form of dryer , the source of heat ( electric heater or steam coil) is at floor level & relies on natural convection. Therefore no efficient ... of crude drugs 2)For chemicals 3)For powders 4)For Granules used in tablet manufacturing 

Capacity of a rotary dryer depends on its (A) rpm (B) Inclination with ground surface (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Capacity of a rotary dryer depends on its (A) rpm (B) Inclination with ground surface (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Flights in a rotary dryer are provided to (A) Lift and shower the solids thus exposing it thoroughly to the drying action of the gas (B) Reduce the residence time of solid (C) Increase the residence time of the solid (D) None of these

Description : Flights in a rotary dryer are provided to (A) Lift and shower the solids thus exposing it thoroughly to the drying action of the gas (B) Reduce the residence time of solid (C) Increase the residence time of the solid (D) None of these

Last Answer : (A) Lift and shower the solids thus exposing it thoroughly to the drying action of the gas

Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Description : Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Last Answer : (B) Mechanical draft cooling tower

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Description : shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Last Answer : i. Minimum tillage of trashy land at shallow depths

Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Last Answer : f. Dried hard soils

. Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

. The most widely used crude topping column in refineries is the__________ column.(A) Bubble-cap(B) Packed bed(C) Fluidised bed(D) Perforated plate

Description : . The most widely used crude topping column in refineries is the__________ column. (A) Bubble-cap (B) Packed bed (C) Fluidised bed (D) Perforated plate

Last Answer : (A) Bubble-cap

Which of the following is the most widely used cracking process in oil refineries? (A) Dubbs process (B) T.C.C. moving bed process (C) Fluidised bed catalytic cracking process (D) Houdry's fixed bed process

Description : Which of the following is the most widely used cracking process in oil refineries? (A) Dubbs process (B) T.C.C. moving bed process (C) Fluidised bed catalytic cracking process (D) Houdry's fixed bed process

Last Answer : (C) Fluidised bed catalytic cracking process

Which of the following is not a batch drier? (A) Truck drier (B) Agitated pan drier (C) Fluidised bed drier (D) Vacuum shelf drier

Description : Which of the following is not a batch drier? (A) Truck drier (B) Agitated pan drier (C) Fluidised bed drier (D) Vacuum shelf drier

Last Answer : (C) Fluidised bed drier

Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Description : Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Last Answer : (A) It cannot burn low grade coal

Advantages of fluidised bed combustion are (A) Reduced NOx formation in flue gas (B) Lower furnace operating temperature (C) High heat transfer rate (D) All (A), (B) & (C)

Description : Advantages of fluidised bed combustion are (A) Reduced NOx formation in flue gas (B) Lower furnace operating temperature (C) High heat transfer rate (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Slugging in a fluidised bed can be avoided by using (A) Tall narrow vessel (B) Deep bed of solids (C) Shallow beds of solids and proper choice of particle size (D) Very large particles

Description : Slugging in a fluidised bed can be avoided by using (A) Tall narrow vessel (B) Deep bed of solids (C) Shallow beds of solids and proper choice of particle size (D) Very large particles

Last Answer : (C) Shallow beds of solids and proper choice of particle size