Which of the following is an undesirable property for an absorbingsolvent? (A) Low vapour pressure (B) Low velocity (C) Low freezing point (D) None of these

Which of the following is an undesirable property for an absorbingsolvent?
(A) Low vapour pressure
(B) Low velocity
(C) Low freezing point
(D) None of these
by

1 Answer

Answer :

(D) None of these
by

Related questions

ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Description : ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Last Answer : (D) High viscosity

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

On addition of solute in the solvent, the __________ of the solution decreases. (A) Boiling point (B) Freezing point (C) Vapour pressure (D) Both (B) and (C)

Description : On addition of solute in the solvent, the __________ of the solution decreases. (A) Boiling point (B) Freezing point (C) Vapour pressure (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following is an undesirable property in a tower packing? (A) Large surface per unit volume (B) Large free cross-section (C) Low weight per unit volume (D) Large weight of liquid retained

Description : Which of the following is an undesirable property in a tower packing? (A) Large surface per unit volume (B) Large free cross-section (C) Low weight per unit volume (D) Large weight of liquid retained

Last Answer : (D) Large weight of liquid retained

Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Last Answer : B) High thermal conductivity

‘Why excessive heating and repeated use of cooking oil are most undesirable? (1) The oil vapour can cause indoor pollution (2) Carcinogenic substances like benzpyrene are produced (3) Nutrient value of food is lost (4) Loss and wastage of oil

Description : ‘Why excessive heating and repeated use of cooking oil are most undesirable? (1) The oil vapour can cause indoor pollution (2) Carcinogenic substances like benzpyrene are produced (3) Nutrient value of food is lost (4) Loss and wastage of oil

Last Answer : (2) Carcinogenic substances like benzpyrene are produced Explanation: Repeated use of cooking oil at high temperatures will cause the hydraulic fat into free fatty acids are easily oxidized, so ... experts recommend eating foods that contain saturated fat less than 10 percent of the daily intake.

‘Why excessive heating and repeated use of cooking oil are most undesirable ? (1) The oil vapour can cause indoor pollution (2) Carcinogenic substances like benzpyrene are produced (3) Nutrient value of food is lost (4) Loss and wastage of oil

Description : ‘Why excessive heating and repeated use of cooking oil are most undesirable ? (1) The oil vapour can cause indoor pollution (2) Carcinogenic substances like benzpyrene are produced (3) Nutrient value of food is lost (4) Loss and wastage of oil

Last Answer : Carcinogenic substances like benzpyrene are produced

Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Description : Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Last Answer : (D) None of these

Crystallisation of polymers is an undesirable property. Crystallisation of celluloid is prevented by adding (A) Glycerol (B) Nitro cellulose (C) Camphor (D) None of these

Description : Crystallisation of polymers is an undesirable property. Crystallisation of celluloid is prevented by adding (A) Glycerol (B) Nitro cellulose (C) Camphor (D) None of these

Last Answer : (C) Camphor

Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Description : High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Last Answer : (C) Viscosity

Which of the following is the most important property for a jet fuel? (A) Cloud point (B) Pour point (C) Colour (D) Freezing point

Description : Which of the following is the most important property for a jet fuel? (A) Cloud point (B) Pour point (C) Colour (D) Freezing point

Last Answer : (D) Freezing point

The most important property for a jet fuel is its (A) Viscosity (B) Freezing point (C) Calorific value (D) Flash poin

Description : The most important property for a jet fuel is its (A) Viscosity (B) Freezing point (C) Calorific value (D) Flash poin

Last Answer : (B) Freezing point

Higher vapour pressure of gasoline indicates(A) Low flash point(B) High breathing loss(C) Both (A) and (B)(D) Neither (A) nor (B

Description : Higher vapour pressure of gasoline indicates (A) Low flash point (B) High breathing loss (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (D) Neither (A) nor (B

Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Description : Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Last Answer : (C) High vapour pressure

Which of the following is not a property of heavy water? (1) Boiling point of heavy water is lower than that or ordinary water (2) Density of heavy water is higher than that of ordinary water (3) Freezing point of heavy water is higher than that of ordinary water (4) It produces corrosion

Description : Which of the following is not a property of heavy water? (1) Boiling point of heavy water is lower than that or ordinary water (2) Density of heavy water is higher than that of ordinary water (3) Freezing point of heavy water is higher than that of ordinary water (4) It produces corrosion

Last Answer : (1) Boiling point of heavy water is lower than that or ordinary water Explanation: Heavy water, formally called deuterium oxide or 2H90 or D20, is a form of water that contains the hydrogen ... well: for instance heavy water used in CANDLE reactors is 99.75% enriched by hydrogen atom-fraction.

Which of the following is not a property of heavy water ? (1) Boiling point of heavy water is lower than that or ordinary water (2) Density of heavy water is higher than that of ordinary water (3) Freezing point of heavy water is higher than that of ordinary water (4) It produces corrosion

Description : Which of the following is not a property of heavy water ? (1) Boiling point of heavy water is lower than that or ordinary water (2) Density of heavy water is higher than that of ordinary water (3) Freezing point of heavy water is higher than that of ordinary water (4) It produces corrosion

Last Answer : Boiling point of heavy water is lower than that or ordinary water

Mercaptans are (A) Low boiling sulphur compounds(B) Added in LPG cylinders to detect gas leakage by its smell(C) Undesirable in petrol, as they reduce its octane number(D) All (A), (B) and (C)

Description : Mercaptans are (A) Low boiling sulphur compounds (B) Added in LPG cylinders to detect gas leakage by its smell (C) Undesirable in petrol, as they reduce its octane number (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by the force of adhesion between liquid molecules c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Description : Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by ... it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Last Answer : c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions

Relative lowering of vapour pressure is a colligative property because_____________. (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of the solute molecules. (b)It does not depends on number of particles of electrolyte solute in solution and does not depend on the nature of the solute particles. (c)It depends on the concentration of a non electrolyte solute in solution as well as on the nature of the solute molecules. (d)It depends on the concentration of an electrolyte or nonelectrolyte solutein solution as well as on the nature of solute molecules.

Description : Relative lowering of vapour pressure is a colligative property because_____________. (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of ... of an electrolyte or nonelectrolyte solutein solution as well as on the nature of solute molecules.

Last Answer : (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of the solute molecules.

Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Description : Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Last Answer : (A) High viscosity index lube oil

When the solvent dissolves very little of solute, then (A) Solvent of low latent heat of vaporisation should be used (B) Solvent of low freezing point should be used (C) Large quantity of solvent is required to extract the solute (D) Very small quantity of solvent is required

Description : When the solvent dissolves very little of solute, then (A) Solvent of low latent heat of vaporisation should be used (B) Solvent of low freezing point should be used (C) Large quantity of solvent is required to extract the solute (D) Very small quantity of solvent is required

Last Answer : (C) Large quantity of solvent is required to extract the solute

Cavitation in a pump creates so many undesirable effects. Out of the following, which is not an undesirable effect created by cavitation? (A) Decrease in effect(B) Increase in thrust(C) Develops noise(D) Develops high pressure

Description : Cavitation in a pump creates so many undesirable effects. Out of the following, which is not an undesirable effect created by cavitation? (A) Decrease in effect (B) Increase in thrust (C) Develops noise (D) Develops high pressure

Last Answer : (D) Develops high pressure

Which of the following is an undesirable characteristic of a refrigerant? (A) It should be non-explosive (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils (C) Its vapor pressure at the condenser temperature should be very high (D) None of these

Description : Which of the following is an undesirable characteristic of a refrigerant? (A) It should be non-explosive (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils (C) Its vapor pressure at the condenser temperature should be very high (D) None of these

Last Answer : (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils

A good solvent used for absorption should not have very high (A) Viscosity (B) Vapor pressure (C) Freezing point (D) All (A), (B) & (C)

Description : A good solvent used for absorption should not have very high (A) Viscosity (B) Vapor pressure (C) Freezing point (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Urea is formed only (A) In liquid phase (B) In vapour phase (C) At very high temperature (D) At very low pressure (vacuum)

Description : Urea is formed only (A) In liquid phase (B) In vapour phase (C) At very high temperature (D) At very low pressure (vacuum)

Last Answer : (A) In liquid phase

Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of vaporisation is constant (C) Volume in the liquid state is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Description : An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Last Answer : (C) Both (A) and (B)

A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co-efficient and fi° is the fugacity of the pure component i. the Ki value (Yi = Ki xi) is therefore, in general a function of (A) Temperature only (B) Temperature and pressure only (C) Temperature, pressure and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Description : A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co- ... and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Last Answer : (C) Temperature, pressure and liquid composition xi only

Probability of cavitation occuring becomes very high, when the local __________ resulting in water bubbles formation, which on rupture cause cavitation (A) Pressure falls below the vapour pressure (B) Pressure becomes very high (C) Temperature becomes low (D) All 'a', 'b' & 'c'

Description : Probability of cavitation occuring becomes very high, when the local __________ resulting in water bubbles formation, which on rupture cause cavitation (A) Pressure falls below the vapour pressure (B) Pressure becomes very high (C) Temperature becomes low (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Description : Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Last Answer : (C) Vapour locking tendency

Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Description : Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Last Answer : (C) Higher flash point and fire point

True boiling point apparatus is used for the (A) Determination of characterisation factor (B) Evaluation of oil stocks (C) Determination of true vapour pressure (D) None of these

Description : True boiling point apparatus is used for the (A) Determination of characterisation factor (B) Evaluation of oil stocks (C) Determination of true vapour pressure (D) None of these

Last Answer : (D) None of these

Dew point of a gas-vapour mixture (A) Increases with temperature rise (B) Decreases with temperature rise (C) Decreases with decrease in pressure (D) Increases with increase in pressure

Description : Dew point of a gas-vapour mixture (A) Increases with temperature rise (B) Decreases with temperature rise (C) Decreases with decrease in pressure (D) Increases with increase in pressure

Last Answer : (C) Decreases with decrease in pressure

An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively. The humidity of air sample expressed as kg of water vapour/kg of dry air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Description : An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively ... air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Last Answer : (D) 0.152

At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Description : At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Last Answer : (C) Same

When dry bulb temperature & wet bulb temperature of moist air is the same, it means that the (A) Partial pressure of water vapour is less than the total pressure (B) Humidity is < 100% & dew point temperature of air has not reached (C) Dew point temperature of air has not reached & air is not saturated fully (D) Air is fully saturated

Description : When dry bulb temperature & wet bulb temperature of moist air is the same, it means that the (A) Partial pressure of water vapour is less than the total pressure (B) Humidity is < 100% & dew ... Dew point temperature of air has not reached & air is not saturated fully (D) Air is fully saturated

Last Answer : (D) Air is fully saturated

Priming in a distillation column (A) Results from very low gas velocity (B) Is desirable from point efficiency consideration (C) Is characterised by the presence of foam throughout the space between trays (D) Reduces the overall pressure drop

Description : Priming in a distillation column (A) Results from very low gas velocity (B) Is desirable from point efficiency consideration (C) Is characterised by the presence of foam throughout the space between trays (D) Reduces the overall pressure drop

Last Answer : (C) Is characterised by the presence of foam throughout the space between trays

(3) prevents freezing of petrol Explanation: Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound widely used as an automotive antifreeze and a precursor to polymers. In its pure form, it is an odorless, colourless, syrupy, sweettasting liquid. Ethylene glycol is toxic, and ingestion can result in death. Due to its low freezing point ethylene glycol resists freezing. A mixture of 60% ethylene glycol and 40% water freezes at -45 degree C (- 49 degree F).

Description : (3) prevents freezing of petrol Explanation: Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound widely used as an automotive antifreeze and a precursor to polymers. In its pure form, it is ... A mixture of 60% ethylene glycol and 40% water freezes at -45 degree C (- 49 degree F).

Last Answer : Rust is - (1) A mixture of Fe₂O₃ and Fe(OH) ₂ (2) A mixture of FeO and Fe(OH)₂ (3) FeO only (4) A mixture of Fe₂O₃, 3H₂O and FeO

The bubble tube is nearly filled with (A) Alcohol or chloroform (B) A liquid which is very mobile (C) A liquid having low freezing point (D) All the above

Description : The bubble tube is nearly filled with (A) Alcohol or chloroform (B) A liquid which is very mobile (C) A liquid having low freezing point (D) All the above

Last Answer : (D) All the above

(2) stabilise the colloid and prevent crystallisation Explanation: Gelatine, being a colloid, has the property of preventing crystallization. In ice lollies and icecream this is demonstrated by the formation of a very fine crystal structure on freezing. This goes much further in that gelatine stabilized icecream does not become grainy or sandy due to the slow crystallisation of lactose with time.

Description : (2) stabilise the colloid and prevent crystallisation Explanation: Gelatine, being a colloid, has the property of preventing crystallization. In ice lollies and icecream this is demonstrated by the formation ... does not become grainy or sandy due to the slow crystallisation of lactose with time.

Last Answer : Glycol is added to aviation gasoline because it - (1) reduces evaporation of petrol (2) increases efficiency of petrol (3) prevents freezing of petrol (4) reduces consumption of petrol

What is the temperature when water and vapor are in equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Description : What is the temperature when water and vapor are in equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Last Answer : Steam point

What is the temperature when water and vapor are in the equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Description : What is the temperature when water and vapor are in the equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Last Answer : Steam point

Which of the following properties is greater for a solution than for the pure solvent? w) freezing point x) vapor pressure y) temperature z) boiling point

Description : Which of the following properties is greater for a solution than for the pure solvent? w) freezing point x) vapor pressure y) temperature z) boiling point

Last Answer : ANSWER: D -- BOILING POINT

In vapour compression cycle using NH3 as refrigerant, initial charge is filled at (a) suction of compressor (b) delivery of compressor (c) high pressure side close to receiver (d) low pressure side near receiver

Description : In vapour compression cycle using NH3 as refrigerant, initial charge is filled at (a) suction of compressor (b) delivery of compressor (c) high pressure side close to receiver (d) low pressure side near receiver

Last Answer : Ans: c

A common fluorescent tube contains (a) sodium vapour (b) argon at low pressure (c) mercury vapour at low pressure (d) mercuric oxide and neon

Description : A common fluorescent tube contains (a) sodium vapour (b) argon at low pressure (c) mercury vapour at low pressure (d) mercuric oxide and neon

Last Answer : Ans:(c)

In a barometer, mercury is preferred over water because (a) mercury is a good conductor of heat (b) mercury is shining and therefore its level can be read easily (c) mercury is available in pure form (d) mercury has high density and low vapour pressure

Description : In a barometer, mercury is preferred over water because (a) mercury is a good conductor of heat (b) mercury is shining and therefore its level can be read easily (c) mercury is available in pure form (d) mercury has high density and low vapour pressure

Last Answer : Ans:(d)

Alcohol is used in manometers because (A) It has low vapour pressure (B) It is clearly visible (C) It has low surface tension (D) It can provide longer column due to low density

Description : Alcohol is used in manometers because (A) It has low vapour pressure (B) It is clearly visible (C) It has low surface tension (D) It can provide longer column due to low density

Last Answer : Answer: Option D

Mercury is often used in barometer because (A) It is the best liquid (B) The height of barometer will be less (C) Its vapour pressure is so low that it may be neglected (D) Both (B) and (C)

Description : Mercury is often used in barometer because (A) It is the best liquid (B) The height of barometer will be less (C) Its vapour pressure is so low that it may be neglected (D) Both (B) and (C)

Last Answer : Answer: Option D