increasing the capacity of a screen __________ the screen effectiveness. (A) Decreases (B) Increases (C) Does not effect (D) None of these

increasing the capacity of a screen __________ the screen effectiveness.
(A) Decreases
(B) Increases
(C) Does not effect
(D) None of these
by

1 Answer

Answer :

(A) Decreases
by

Related questions

With increase in the capacity of screens, the screen effectiveness (A) Remains unchanged (B) Increases (C) Decreases (D) Decreases exponentially

Description : With increase in the capacity of screens, the screen effectiveness (A) Remains unchanged (B) Increases (C) Decreases (D) Decreases exponentially

Last Answer : (C) Decreases

In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Description : In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the correct statement. (A) The capacity and the effectiveness of a screen are the same (B) The capacity and the effectiveness of screen are opposing factors (C) The screening surface of a 'reel' (a revolving screen used in flour mills) is made of silk bolting cloth supported by wire mesh (D) Both (B) and (C)

Description : Pick out the correct statement. (A) The capacity and the effectiveness of a screen are the same (B) The capacity and the effectiveness of screen are opposing factors (C) The screening surface of a 'reel' (a ... flour mills) is made of silk bolting cloth supported by wire mesh (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C

As particle size is reduced (A) Screening becomes progressively more difficult (B) Screening becomes progressively easier (C) Capacity and effectiveness of the screen is increased (D) None of these

Description : As particle size is reduced (A) Screening becomes progressively more difficult (B) Screening becomes progressively easier (C) Capacity and effectiveness of the screen is increased (D) None of these

Last Answer : (A) Screening becomes progressively more difficult

The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Description : The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Last Answer : (D) May increase or decrease; depends on the material

The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number(A) Increases(B) Decreases(C) Remain same(D) May increase or decrease.

Description : The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number. (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease

Last Answer : (B) Decreases

Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in __________ of the catalyst. (A) Stabilisation (B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Last Answer : (D) All a, b & c

Which of the following statements describes the effects of ambient temperature on local action within lead-acid storage batteries? A. Increasing ambient temperature increases local action. B. Increasing ambient temperature decreases local action. C. Ambient temperature has no effect on local action. D. At 90°F all local action virtually ceases.

Description : Which of the following statements describes the effects of ambient temperature on local action within lead-acid storage batteries? A. Increasing ambient temperature increases local action. B. Increasing ambient ... has no effect on local action. D. At 90°F all local action virtually ceases.

Last Answer : Answer: A

Increasing concave length_______ seed separation at diminishing rate a) Increases b) Decreases c)No effect d) None of the

Description : Increasing concave length_______ seed separation at diminishing rate a) Increases b) Decreases c)No effect d) None of the

Last Answer : a) Increases

During size reduction by a jaw crusher, the energy consumed decreases with the (A) Decreasing size of product at constant size of feed (B) Decreasing machine capacity (C) Increasing size of feed at constant reduction ratio (D) None of these

Description : During size reduction by a jaw crusher, the energy consumed decreases with the (A) Decreasing size of product at constant size of feed (B) Decreasing machine capacity (C) Increasing size of feed at constant reduction ratio (D) None of these

Last Answer : (C) Increasing size of feed at constant reduction ratio

Choose the correct statement. (A) Coking tendency increases with increasing molecular weight (B) Coking tendency decreases with increasing molecular weight (C) Higher pressure enhances coke formation (D) Coking is an exothermic reaction

Description : Choose the correct statement. (A) Coking tendency increases with increasing molecular weight (B) Coking tendency decreases with increasing molecular weight (C) Higher pressure enhances coke formation (D) Coking is an exothermic reaction

Last Answer : (A) Coking tendency increases with increasing molecular weigh

For shell and tube heat exchanger, with increasing heat transfer area, the purchased cost per unit heat transfer area (A) Increases (B) Decreases (C) Remain constant (D) Passes through a maxima

Description : For shell and tube heat exchanger, with increasing heat transfer area, the purchased cost per unit heat transfer area (A) Increases (B) Decreases (C) Remain constant (D) Passes through a maxima

Last Answer : (D) Passes through a maxima

Pick out the wrong statement. (A) Angle of repose of coal increases with its increasing size (B) Specific gravity of coal increases with its increasing maturity (C) Refractive index and reflectance of coal increases with the increasing rank of coal (D) Specific heat of coal decreases with increases in the volatile matter and decrease in the C/H ratio of coal

Description : Pick out the wrong statement. (A) Angle of repose of coal increases with its increasing size (B) Specific gravity of coal increases with its increasing maturity (C) Refractive index and reflectance of ... of coal decreases with increases in the volatile matter and decrease in the C/H ratio of coal

Last Answer : (D) Specific heat of coal decreases with increases in the volatile matter and decrease in the C/H ratio of coal

With increasing flow rate, the hydraulic efficiency of a centrifugal pump (A) Monotonically decreases (B) Decreases and then increases(C) Remains constant(D) Increases and then decreases

Description : With increasing flow rate, the hydraulic efficiency of a centrifugal pump (A) Monotonically decreases (B) Decreases and then increases (C) Remains constant (D) Increases and then decreases

Last Answer : (A) Monotonically decreases

Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes(B) Increases with the increasing flake size keeping the flake thicknessconstant(C) Increases considerably with the rise of temperature(D) Decreases as the moisture content of flakes increases

Description : Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes (B) Increases with the increasing flake size ... considerably with the rise of temperature (D) Decreases as the moisture content of flakes increases

Last Answer : (D) Decreases as the moisture content of flakes increases

Referring to the periodic table of elements, it is found that with increasing atomic number. The atomic size in the same (A) Period increases (B) Period decreases (C) Group increases (D) Both 'b' & 'c'

Description : Referring to the periodic table of elements, it is found that with increasing atomic number. The atomic size in the same (A) Period increases (B) Period decreases (C) Group increases (D) Both 'b' & 'c'

Last Answer : Option D

Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C) With increase in oxygen content, moisture holding capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C ... capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A sand mixture was screened through a standard 10-mesh screen. The mass fraction of the oversize material in feed, overflow and underflow were found to be 0.38, 0.79 and 0.22 respectively. The screen effectiveness based on the oversize is (A) 0.50 (B) 0.58 (C) 0.68 (D) 0.62

Description : A sand mixture was screened through a standard 10-mesh screen. The mass fraction of the oversize material in feed, overflow and underflow were found to be 0.38, 0.79 and 0.22 respectively. The screen effectiveness based on the oversize is (A) 0.50 (B) 0.58 (C) 0.68 (D) 0.62

Last Answer : (A) 0.50

Soil compaction __________ yield of potato. a. Increases b. Decreases c. Does not effect d. Unknown

Description : Soil compaction __________ yield of potato. a. Increases b. Decreases c. Does not effect d. Unknown

Last Answer : Decreases

In forward bias, the width of potential barrier __________ (a) Increases (b) decreases (c) remains same (d) no effect

Description : In forward bias, the width of potential barrier __________ (a) Increases (b) decreases (c) remains same (d) no effect

Last Answer : (b) decreases

Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Description : Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Last Answer : (A) Decreased capacity

The critical spark energy required to ignite a given mixture A. decreases with decreasing sparking voltage B. increases with decreasing sparking voltage C. increases with increasing sparking voltage D. decreases with increasing sparking voltage

Description : The critical spark energy required to ignite a given mixture A. decreases with decreasing sparking voltage B. increases with decreasing sparking voltage C. increases with increasing sparking voltage D. decreases with increasing sparking voltage

Last Answer : ANSWER : D

Which one of the following statements are correct for reciprocating air compressor? A. Its volumetric efficiency increases with increasing clearance ratio B. Its volumetric efficiency increases with pressure ratio C. Its volumetric efficiency does not vary with change in clearance ratio and pressure ratio D. Its volumetric efficiency decreases with increasing clearance ratio and pressure ratio

Description : Which one of the following statements are correct for reciprocating air compressor? A. Its volumetric efficiency increases with increasing clearance ratio B. Its volumetric efficiency increases ... ratio D. Its volumetric efficiency decreases with increasing clearance ratio and pressure ratio

Last Answer : ANSWER : D

With increasing bond order, stability of a bond (a) Decreases (b) Increases (c) Remains unchanged (d) None of these

Description : With increasing bond order, stability of a bond (a) Decreases (b) Increases (c) Remains unchanged (d) None of these

Last Answer : Ans:(b)

By increasing the current, the drift velocity A. decreases B. increases C. remains constant D. becomes zero

Description : By increasing the current, the drift velocity A. decreases B. increases C. remains constant D. becomes zero

Last Answer : remains constant

When C : N ratio goes on increasing the availability of nutrients to crops will- a. Increases b. Decreases c. Does not change d. None of these

Description : When C : N ratio goes on increasing the availability of nutrients to crops will- a. Increases b. Decreases c. Does not change d. None of these

Last Answer : b. Decreases

The consolidation time for soils (A) Increases with increasing compressibility (B) Decreases with increasing permeability (C) Increases rapidly with increasing size of soil mass (D) All the above

Description : The consolidation time for soils (A) Increases with increasing compressibility (B) Decreases with increasing permeability (C) Increases rapidly with increasing size of soil mass (D) All the above

Last Answer : Answer: Option D

Lowering the flaps during a landing approach: a. Increases the angle of descent without increasing the airspeed b. Decreases the angle of descent without increasing power c. Eliminates floating d. Permits approaches at a higher indicated airspeed

Description : Lowering the flaps during a landing approach: a. Increases the angle of descent without increasing the airspeed b. Decreases the angle of descent without increasing power c. Eliminates floating d. Permits approaches at a higher indicated airspeed

Last Answer : a. Increases the angle of descent without increasing the airspeed

Increasing performance and shrinking size does what to the material cost? a. Nothing b. Increases c. Decreases d. Increases for traditional customers only. e. Decreases for traditional customers only.

Description : Increasing performance and shrinking size does what to the material cost? a. Nothing b. Increases c. Decreases d. Increases for traditional customers only. e. Decreases for traditional customers only.

Last Answer : b. Increases

On increasing the reverse bias to a large value in a p-n junction diode current (a) Increases slowly (b) Remains fixed (c) Suddenly increases (d) Decreases slowly

Description : On increasing the reverse bias to a large value in a p-n junction diode current (a) Increases slowly (b) Remains fixed (c) Suddenly increases (d) Decreases slowly

Last Answer : (c) Suddenly increases

factors to consider in improving the effectiveness of herbicides application a). Increasing management diversity b). application timing c). inherent efficacy of herbicide d). All

Description : factors to consider in improving the effectiveness of herbicides application a). Increasing management diversity b). application timing c). inherent efficacy of herbicide d). All

Last Answer : d). All

Which statement is true? a. Increasing in capacity and changes in automation can take less than a year to implement if the product already exists. Sales of capacity take a full year to implement. b. Increases in capacity and changes in automation take a full year to implement. Sales of capacity are immediate. c. Increases in capacity, changes in automation and sales of capacity take a full year to implement. d. Increases in capacity, changes in automation and sales of capacity take less than a year to implement if the product already exists.

Description : Which statement is true? a. Increasing in capacity and changes in automation can take less than a year to implement if the product already exists. Sales of capacity take a full year to implement ... automation and sales of capacity take less than a year to implement if the product already exists.

Last Answer : b. Increases in capacity and changes in automation take a full year to implement. Sales of capacity are immediate.

The capacity of the atmosphere to hold water vapour (a) Increases as the temperature increases (b) Decreases as the temperature increases (c) Increases as the temperature decreases (d) Decreases as the temperature decreases

Description : The capacity of the atmosphere to hold water vapour (a) Increases as the temperature increases (b) Decreases as the temperature increases (c) Increases as the temperature decreases (d) Decreases as the temperature decreases

Last Answer : Ans: (a)

As the amount of clay in a soil increases, its water retaining capacity _____ 30 A. Increases B. Decreases C. Remains unchanged D. None of Above

Description : As the amount of clay in a soil increases, its water retaining capacity _____ 30 A. Increases B. Decreases C. Remains unchanged D. None of Above

Last Answer : ANSWER: A

The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Description : The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Last Answer : (d) Increases with increase in stirrups and longitudinal steels.

Which one of the following statements is TRUE regarding the molar heat capacity for the noble gases? w) heat capacity decreases from Helium to Xenon x) heat capacity increases from helium to argon y) heat capacity increases from Helium to Argon, then decreases to Xenon z) heat capacity is the same for all noble gases

Description : Which one of the following statements is TRUE regarding the molar heat capacity for the noble gases? w) heat capacity decreases from Helium to Xenon x) heat capacity increases from helium to argon y) heat ... Helium to Argon, then decreases to Xenon z) heat capacity is the same for all noble gases 

Last Answer : ANSWER: Z -- HEAT CAPACITY IS THE SAME FOR ALL NOBLE GASES 

On increasing the temperature the solubility of most of the gases in water decreases. An important consequence of this effect is the thermal pollution of water, such as occurs around power plants cooled by a river or stream. How is the survival of fish affected by thermal pollution of water?

Description : On increasing the temperature the solubility of most of the gases in water decreases. An important consequence of this effect is the thermal pollution of water, such as occurs around power plants cooled by a river or stream. How is the survival of fish affected by thermal pollution of water? 

Last Answer : Ans.: When the water temperature of the river or stream is increases the solubility of oxygen in water decreases. Due to this decrease in dissolved oxygen the survival of fish becomes difficult.

The most important advantage of a video disk is A) Compactness B) Potential capacity C) Durability D) Cost effectiveness

Description : The most important advantage of a video disk is A) Compactness B) Potential capacity C) Durability D) Cost effectiveness

Last Answer : Answer : B

The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability d. Cost effectiveness

Description : The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability d. Cost effectiveness

Last Answer : Compactness

The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability d. Cost effectiveness

Description : The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability d. Cost effectiveness

Last Answer : b. Potential capacity

Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) NPSH required (B) BHP required by the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Description : Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) ... the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Lower temperature and large excess of ammonia in urea melt (A) Increases biuret formation (B) Decreases biuret formation (C) Is undesirable (D) Does not effect biuret formation

Description : Lower temperature and large excess of ammonia in urea melt (A) Increases biuret formation (B) Decreases biuret formation (C) Is undesirable (D) Does not effect biuret formation

Last Answer : (B) Decreases biuret formation

In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Description : In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Last Answer : (A) Percentage elongation

The following is true of aluminium hydroxide gel except: A. It is a weak and slowly reacting antacid B. Its acid neutralizing capacity decreases on storage C. It interferes with absorption of phosphate in the intestine D. It causes loose motions as a side effect

Description : The following is true of aluminium hydroxide gel except: A. It is a weak and slowly reacting antacid B. Its acid neutralizing capacity decreases on storage C. It interferes with absorption of phosphate in the intestine D. It causes loose motions as a side effect

Last Answer : D. It causes loose motions as a side effec

A yaw damper: a. Increases rudder effectiveness b. Must be disengaged before making a turn c. Augments stability d. Increases the rate of yaw

Description : A yaw damper: a. Increases rudder effectiveness b. Must be disengaged before making a turn c. Augments stability d. Increases the rate of yaw

Last Answer : c. Augments stability

This process management initiative increases the effectiveness of the Sales Budget and therefore demand. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : This process management initiative increases the effectiveness of the Sales Budget and therefore demand. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : d. Channel Support systems

Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Description : Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Last Answer : d. reduces R&D cycle time.

The time lag between the performance of marketing activities and their results A)limits the marketing manager's ability to measure the effectiveness of marketing activities. B)facilitates the ability to measure performance. C)increases the chance of accurate measurement. D)limits the amount of money to be spent on measurement.

Description : The time lag between the performance of marketing activities and their results A)limits the marketing manager's ability to measure the effectiveness of marketing activities. B)facilitates the ability to ... chance of accurate measurement. D)limits the amount of money to be spent on measurement.

Last Answer : A)limits the marketing manager's ability to measure the effectiveness of marketing activities.

In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Description : In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Last Answer : (A) Sulphur increases

During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Description : During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Last Answer : (B) Increases