Water has high boiling point due to the presence of?

Water has high boiling point due to the
presence of?
by

1 Answer

Answer :

Hydrogen bonding
by

Related questions

At high altitudes it is difficult to cook eggs or vegetables properly because of (a) High boiling point of water and low atmospheric pressure (b) Low boiling point of water and low atmospheric pressure (c) Low value of acceleration due to gravity (d) High atmospheric pressure and low billing point of water

Description : At high altitudes it is difficult to cook eggs or vegetables properly because of (a) High boiling point of water and low atmospheric pressure (b) Low boiling point of water and low atmospheric ... Low value of acceleration due to gravity (d) High atmospheric pressure and low billing point of water

Last Answer : Ans:(b)

High boiling point of water is due to?

Description : High boiling point of water is due to?

Last Answer : Hydrogen bonding

The boiling point of water decreases at higher altitudes is due to – (1) low temperature (2) low atmospheric pressure (3) high temperature (4) high atmospheric pressure

Description : The boiling point of water decreases at higher altitudes is due to – (1) low temperature (2) low atmospheric pressure (3) high temperature (4) high atmospheric pressure

Last Answer : (2) low atmospheric pressure Explanation: At higher altitudes, the air pressure is decreased, which forces water's boiling point to lower. The air pressure decreases with altitude because of the ... of air. The lowered boiling point of water requires an increase in cooking times or temperature.

The boiling point of water decreases at higher altitudes is due to (1) low temperature (2) low atmospheric pressure (3) high temprature (4) high atmospheric pressure

Description : The boiling point of water decreases at higher altitudes is due to (1) low temperature (2) low atmospheric pressure (3) high temprature (4) high atmospheric pressure

Last Answer : low atmospheric pressure

The presence of free ammonia in sewage, is detected by A. Boiling B. Adding potassium permanganate C. Adding sulphuric acid D. Phenol-di-sulphuric acid

Description : The presence of free ammonia in sewage, is detected by A. Boiling B. Adding potassium permanganate C. Adding sulphuric acid D. Phenol-di-sulphuric acid

Last Answer : ANS: A

When a liquid is at its boiling point, no temperature change takes place due to heating. The energy supplied due to heating (a) Is used up to increase the potential energy of the liquid molecules (b) Is used up to increase the kinetic energy of the molecules (c) Is used up to increase the kinetic energy and potential energy of the molecules (d) Is wasted

Description : When a liquid is at its boiling point, no temperature change takes place due to heating. The energy supplied due to heating (a) Is used up to increase the potential energy of the liquid molecules (b ... c) Is used up to increase the kinetic energy and potential energy of the molecules (d) Is wasted

Last Answer : Ans:(a)

The lowest boiling point of helium is due to its

Description : The lowest boiling point of helium is due to its

Last Answer : The lowest boiling point of helium is due to its A. inertness B. Gaseous nature C. High polarisability D. Weak van der Waals forces between atoms

The high boiling points of alcohols, as compared to the corresponding alkanes, are due to (a) Hydrogen bonding (b) Heavy oxygen atom (c) Water solubility(d) None of these

Description : The high boiling points of alcohols, as compared to the corresponding alkanes, are due to (a) Hydrogen bonding (b) Heavy oxygen atom (c) Water solubility (d) None of these

Last Answer : Hydrogen bonding

Why is it easier to cook in a pressure cooker? (a) High pressure creates turbulence (b) More steam is formed inside the cooker (c) Boiling point of water is raised (d) Boiling point of water is lowered

Description : Why is it easier to cook in a pressure cooker? (a) High pressure creates turbulence (b) More steam is formed inside the cooker (c) Boiling point of water is raised (d) Boiling point of water is lowered

Last Answer : Ans:(c)

Water is used in car radiator because of its – (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Description : Water is used in car radiator because of its – (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Last Answer : (3) high specific heat capacity Explanation: Water is used in car radiators because the Specific heat capacity of water is high as a result of which it takes away the heat from engine better compared to ... coolant used in the radiator. If the radiator was to overheat the car would come to a stop.

Water is a good solvent of ionic salts because - (1) It has no colour (2) It has a boiling point (3) It has a high dipole moment (4) It has a high specific heat

Description : Water is a good solvent of ionic salts because - (1) It has no colour (2) It has a boiling point (3) It has a high dipole moment (4) It has a high specific heat

Last Answer : (3) It has a high dipole moment

Water is not suitable as a calorimetric substance because it – (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vaporization

Description : Water is not suitable as a calorimetric substance because it – (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vaporization

Last Answer : (1) has high specific heat Explanation: The specific heat of water is higher than all other common substances. Hence, water is used for heating purposes (as in hot water bottles) and for cooling ... the liquids, mercury has the lowest specific heat due to which it is used as a thermometric liquid.

Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Description : Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Last Answer : (C) High vapour pressure

Boiling point of water gets lowered at high altitudes (e.g., hills), because (A) Temperature is low (B) Atmospheric pressure is low (C) Atmospheric pressure is high (D) None of these

Description : Boiling point of water gets lowered at high altitudes (e.g., hills), because (A) Temperature is low (B) Atmospheric pressure is low (C) Atmospheric pressure is high (D) None of these

Last Answer : Option B

Water is not suitable as a calorimetric substance because it : (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vapourization

Description : Water is not suitable as a calorimetric substance because it : (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vapourization

Last Answer : has high specific heat

Water is used in car radiator because of its (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Description : Water is used in car radiator because of its (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Last Answer : high specific heat capacity

The yield point phenomenon observed in annealed low carbon steel is due to the presence of the following element. (A) Silicon (B) Carbon (C) Phosphorous (D) Chromium

Description : The yield point phenomenon observed in annealed low carbon steel is due to the presence of the following element. (A) Silicon (B) Carbon (C) Phosphorous (D) Chromium

Last Answer : Option B

Boiling point is very high for

Description : Boiling point is very high for

Last Answer : Boiling point is very high for A. He B. Ne C. Kr D. Xe

Why does napthalene have a high boiling point?

Description : Why does napthalene have a high boiling point?

Last Answer : Feel Free to Answer

Do halogens have a high or low boiling point?

Description : Do halogens have a high or low boiling point?

Last Answer : Low

Why H2SO4 has high boiling point?

Description : Why H2SO4 has high boiling point?

Last Answer : Need answer

Metals have ______. (1) High melting and boiling point (2) Low melting and boiling point (3) High melting and low boiling point (4) Low melting and high boiling point

Description : Metals have ______. (1) High melting and boiling point (2) Low melting and boiling point (3) High melting and low boiling point (4) Low melting and high boiling point

Last Answer : (1) High melting and boiling point

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

A liquid with high boiling point decomposes on simple distillation but it can be steam distilled for its purification .Explain how is it possible?

Description : A liquid with high boiling point decomposes on simple distillation but it can be steam distilled for its purification .Explain how is it possible?

Last Answer : In steam distillation boiling occurs when vapour pressure of organic compound & steam becomes equal to atmospheric pressure. As vapour pressure of water is higher than the organic liquid. ... organic liquid vaporizes at a temperature below its boiling point in steam distillation without decomposing.

When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Description : When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Last Answer : (B) Steam

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

The catalytic power of enzymes is due to (a) the presence of amino acids in their structures (b) their high molecular weight (c) their ability to lower the activation energy of the reaction (d) their limited solubility in water and other solvents

Description : The catalytic power of enzymes is due to (a) the presence of amino acids in their structures (b) their high molecular weight (c) their ability to lower the activation energy of the reaction (d) their limited solubility in water and other solvents

Last Answer : Ans:(c)

Mineral oils (e.g. petroleum oils) are preferred over fatty oils (e.g. mustard oil, ghee, tallow, palm oil, olive oil etc.) as a lubricant due to its (A) Poor oxidation stability and high gum forming tendency (B) Greater tendency of decomposition at elevated temperature (C) Hydrolysis tendency in presence of water (D) All (A), (B) and (C)

Description : Mineral oils (e.g. petroleum oils) are preferred over fatty oils (e.g. mustard oil, ghee, tallow, palm oil, olive oil etc.) as a lubricant due to its (A) Poor oxidation stability and high gum forming ... at elevated temperature (C) Hydrolysis tendency in presence of water (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

By boiling water, hardness can be removed if it is due to (A) Calcium sulphate (B) Magnesium sulphate (C) Calcium nitrate (D) Calcium bicarbonate

Description : By boiling water, hardness can be removed if it is due to  (A) Calcium sulphate  (B) Magnesium sulphate  (C) Calcium nitrate  (D) Calcium bicarbonate 

Last Answer : (D) Calcium bicarbonate 

Pick up the correct statement from the following: (A) Due to boiling, the bacterias present in water can be destroyed (B) Lime may be used for softening hard water (C) Excess lime when added to water, raises the pH value of water (D) All the above

Description : Pick up the correct statement from the following:  (A) Due to boiling, the bacterias present in water can be destroyed  (B) Lime may be used for softening hard water  (C) Excess lime when added to water, raises the pH value of water  (D) All the above 

Last Answer : (D) All the above 

Hardness of water can be removed by boiling if it is due to (A) Calcium bicarbonates (B) Calcium sulphates (C) Calcium chloride (D) Calcium nitrates

Description : Hardness of water can be removed by boiling if it is due to  (A) Calcium bicarbonates  (B) Calcium sulphates  (C) Calcium chloride  (D) Calcium nitrates 

Last Answer : (A) Calcium bicarbonates 

(3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word traces its origins back to the latin lux, meaning "light", and generally implies radiance, gloss, or brilliance. Metals in general have high electrical conductivity, high thermal conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Description : (3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word ... conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Last Answer : Cloud is a colloidal dispersion of – (1) Air in a dispersion medium of water (2) Fog in a dispersion medium of water (3) Mist in a dispersion medium of air (4) Water drops in a dispersion medium of air

The luster of a metal is due to - (1) high polishing (2) high density (3) chemical inertness (4) presence of free electrons

Description : The luster of a metal is due to - (1) high polishing (2) high density (3) chemical inertness (4) presence of free electrons

Last Answer : (4) presence of free electrons Explanation: Lustre or luster is the way light interacts with the surface of a crystal, rock, or mineral. The word traces its origins back to the Latin lux, meaning "light", and generally implies radiance, gloss, or brilliance.

A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the (A) Presence of large quantity of hydrogen in the fuel (B) Low calorific value of the fuel (C) High sulphur content in the fuel (D) Lack of thorough mixing of fuel with air

Description : A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the (A) Presence of large ... fuel (C) High sulphur content in the fuel (D) Lack of thorough mixing of fuel with air

Last Answer : (D) Lack of thorough mixing of fuel with air

Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE are engineering stress and engineering strain respectively (C) Phosphorous can be easily recovered in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Last Answer : Option C

The lustre of the metals is because of (1) high density, due to closed packing of atoms (2) high polish (3) reflection of light due to the presence of free electrons (4) absorption of light due to the presence of cavities

Description : The lustre of the metals is because of (1) high density, due to closed packing of atoms (2) high polish (3) reflection of light due to the presence of free electrons (4) absorption of light due to the presence of cavities

Last Answer : reflection of light due to the presence of free electrons

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

When the seepage pressure becomes equal to the pressure due to submerged weight of a soil, the effective pressure is reduced to zero and the soil particles have a tendency to move up in the direction of flow. This phenomenon is generally known (A) Quick condition (B) Boiling condition (C) Quick sand (D) All the above

Description : When the seepage pressure becomes equal to the pressure due to submerged weight of a soil, the effective pressure is reduced to zero and the soil particles have a tendency to move up in the direction of flow. ... known (A) Quick condition (B) Boiling condition (C) Quick sand (D) All the above

Last Answer : Answer: Option D

The boiling point of water, on the Kelvin scale of temperature is-K (a) 100 (b) 273 (c) 373 (d) 212

Description : The boiling point of water, on the Kelvin scale of temperature is-K (a) 100 (b) 273 (c) 373 (d) 212

Last Answer : Ans:(c)

Pick the wrong statement: hydrogen bonding results in (a) Increased solubility in water (b) Higher Van der Waal's forces (c) Molecular association (d) Abnormal boiling point

Description : Pick the wrong statement: hydrogen bonding results in (a) Increased solubility in water (b) Higher Van der Waal's forces (c) Molecular association (d) Abnormal boiling point

Last Answer : Ans:(b)

With rise of boiling point of a water, what will be the latent heat of steam? -Do You Know?

Description : With rise of boiling point of a water, what will be the latent heat of steam? -Do You Know?

Last Answer : answer:

What is the boiling point of water ?

Description : What is the boiling point of water ?

Last Answer : Boiling point of water is 100 ° C. |

What is the boiling point of water ?

Description : What is the boiling point of water ?

Last Answer : Boiling point of water is 100 degree Celsius

Water Boiling point How much ?

Last Answer : water Boiling point 100 ° C

For the process : `H_(2)O (l, 1 atm, 373 K) rArr H_(2)O(g, 1 atm, 373 K)` [Given normal boiling point of water `= 373` K at 1 atm pressure.] The corre

Description : For the process : `H_(2)O (l, 1 atm, 373 K) rArr H_(2)O(g, 1 atm, 373 K)` [Given normal boiling point of water `= 373` K at 1 atm pressure.] The corre

Last Answer : For the process : `H_(2)O (l, 1 atm, 373 K) rArr H_(2)O(g, 1 atm, 373 K)` [Given normal boiling ... lt 0, DeltaU gt 0, Delta H = 0` D. none of these

Assertion : Phenol has lower boiling point then water Reason : Water forms more number of hydrogen bonds

Description : Assertion : Phenol has lower boiling point then water Reason : Water forms more number of hydrogen bonds

Last Answer : Assertion : Phenol has lower boiling point then water Reason : Water forms more number of hydrogen ... false D. Assertion is false, Reason is true

What is the boiling point of water at an elevation of 1.55 and times104 ft?

Description : What is the boiling point of water at an elevation of 1.55 and times104 ft?

Last Answer : The boiling point of water at this altitude is 84,2 oC.

How many degrees are there between the melting point of ice and boiling point of water?

Description : How many degrees are there between the melting point of ice and boiling point of water?

Last Answer : On the centigrade scale there is 100.On the fahrenheit scale there is 180.