Why H2SO4 has high boiling point?

Why H2SO4 has high boiling point?
by

1 Answer

Answer :

Need answer
by

Related questions

Which among the following is used as a catalyst in the production of high octane fuels? (1) HNO3 (2) H2SO4 (3) HCl (4) HF

Description : Which among the following is used as a catalyst in the production of high octane fuels? (1) HNO3 (2) H2SO4 (3) HCl (4) HF

Last Answer : (2) H2SO4 Explanation: Sulfuric acid is used as a catalyst for refining and for producing alkylate, an essential component of highoctane fuel. The hydrocarbon molecules are reformed into more complex molecules with a higher octane rating value.

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Last Answer : (C) Aluminium, tin and rubber

Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)

Description : Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)

Last Answer : (C) Reinforced concrete lined with lead

Nitric acid is produced on commercial scale in a fertiliser plant by (A) Oxidation of ammonia (B) CaNO3 + H2SO4 reaction (C) Passing air through high voltage electric arc (D) None of these

Description : Nitric acid is produced on commercial scale in a fertiliser plant by (A) Oxidation of ammonia (B) CaNO3 + H2SO4 reaction (C) Passing air through high voltage electric arc (D) None of these

Last Answer : (A) Oxidation of ammonia

The chamber process is (A) Preferred over contact process for producing 98 to 100% H2SO4 and various oleums (B) Non-catalytic and operates only on pyrites (C) A batch process for directly producing high strength (98 to 100%) H2SO4 (D) None of these

Description : The chamber process is (A) Preferred over contact process for producing 98 to 100% H2SO4 and various oleums (B) Non-catalytic and operates only on pyrites (C) A batch process for directly producing high strength (98 to 100%) H2SO4 (D) None of these

Last Answer : (D) None of these

Boiling point is very high for

Description : Boiling point is very high for

Last Answer : Boiling point is very high for A. He B. Ne C. Kr D. Xe

Why does napthalene have a high boiling point?

Description : Why does napthalene have a high boiling point?

Last Answer : Feel Free to Answer

Do halogens have a high or low boiling point?

Description : Do halogens have a high or low boiling point?

Last Answer : Low

Why is it easier to cook in a pressure cooker? (a) High pressure creates turbulence (b) More steam is formed inside the cooker (c) Boiling point of water is raised (d) Boiling point of water is lowered

Description : Why is it easier to cook in a pressure cooker? (a) High pressure creates turbulence (b) More steam is formed inside the cooker (c) Boiling point of water is raised (d) Boiling point of water is lowered

Last Answer : Ans:(c)

At high altitudes it is difficult to cook eggs or vegetables properly because of (a) High boiling point of water and low atmospheric pressure (b) Low boiling point of water and low atmospheric pressure (c) Low value of acceleration due to gravity (d) High atmospheric pressure and low billing point of water

Description : At high altitudes it is difficult to cook eggs or vegetables properly because of (a) High boiling point of water and low atmospheric pressure (b) Low boiling point of water and low atmospheric ... Low value of acceleration due to gravity (d) High atmospheric pressure and low billing point of water

Last Answer : Ans:(b)

Metals have ______. (1) High melting and boiling point (2) Low melting and boiling point (3) High melting and low boiling point (4) Low melting and high boiling point

Description : Metals have ______. (1) High melting and boiling point (2) Low melting and boiling point (3) High melting and low boiling point (4) Low melting and high boiling point

Last Answer : (1) High melting and boiling point

The boiling point of water decreases at higher altitudes is due to – (1) low temperature (2) low atmospheric pressure (3) high temperature (4) high atmospheric pressure

Description : The boiling point of water decreases at higher altitudes is due to – (1) low temperature (2) low atmospheric pressure (3) high temperature (4) high atmospheric pressure

Last Answer : (2) low atmospheric pressure Explanation: At higher altitudes, the air pressure is decreased, which forces water's boiling point to lower. The air pressure decreases with altitude because of the ... of air. The lowered boiling point of water requires an increase in cooking times or temperature.

Water is used in car radiator because of its – (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Description : Water is used in car radiator because of its – (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Last Answer : (3) high specific heat capacity Explanation: Water is used in car radiators because the Specific heat capacity of water is high as a result of which it takes away the heat from engine better compared to ... coolant used in the radiator. If the radiator was to overheat the car would come to a stop.

Water is a good solvent of ionic salts because - (1) It has no colour (2) It has a boiling point (3) It has a high dipole moment (4) It has a high specific heat

Description : Water is a good solvent of ionic salts because - (1) It has no colour (2) It has a boiling point (3) It has a high dipole moment (4) It has a high specific heat

Last Answer : (3) It has a high dipole moment

Water is not suitable as a calorimetric substance because it – (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vaporization

Description : Water is not suitable as a calorimetric substance because it – (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vaporization

Last Answer : (1) has high specific heat Explanation: The specific heat of water is higher than all other common substances. Hence, water is used for heating purposes (as in hot water bottles) and for cooling ... the liquids, mercury has the lowest specific heat due to which it is used as a thermometric liquid.

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Water has high boiling point due to the presence of?

Description : Water has high boiling point due to the presence of?

Last Answer : Hydrogen bonding

High boiling point of water is due to?

Description : High boiling point of water is due to?

Last Answer : Hydrogen bonding

A liquid with high boiling point decomposes on simple distillation but it can be steam distilled for its purification .Explain how is it possible?

Description : A liquid with high boiling point decomposes on simple distillation but it can be steam distilled for its purification .Explain how is it possible?

Last Answer : In steam distillation boiling occurs when vapour pressure of organic compound & steam becomes equal to atmospheric pressure. As vapour pressure of water is higher than the organic liquid. ... organic liquid vaporizes at a temperature below its boiling point in steam distillation without decomposing.

When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Description : When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Last Answer : (B) Steam

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Description : Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Last Answer : (C) High vapour pressure

Boiling point of water gets lowered at high altitudes (e.g., hills), because (A) Temperature is low (B) Atmospheric pressure is low (C) Atmospheric pressure is high (D) None of these

Description : Boiling point of water gets lowered at high altitudes (e.g., hills), because (A) Temperature is low (B) Atmospheric pressure is low (C) Atmospheric pressure is high (D) None of these

Last Answer : Option B

The boiling point of water decreases at higher altitudes is due to (1) low temperature (2) low atmospheric pressure (3) high temprature (4) high atmospheric pressure

Description : The boiling point of water decreases at higher altitudes is due to (1) low temperature (2) low atmospheric pressure (3) high temprature (4) high atmospheric pressure

Last Answer : low atmospheric pressure

Water is not suitable as a calorimetric substance because it : (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vapourization

Description : Water is not suitable as a calorimetric substance because it : (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vapourization

Last Answer : has high specific heat

Water is used in car radiator because of its (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Description : Water is used in car radiator because of its (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Last Answer : high specific heat capacity

Why are sulfuric acid ( H2SO4) and hydrochloric acid ( HCl) harmful to human body ?

Description : Why are sulfuric acid ( H2SO4) and hydrochloric acid ( HCl) harmful to human body ?

Last Answer : They are strong acids. One of the properties of acid is decay. When these fall on the skin, it causes wounds. Therefore , these are deadly harmful to human body.

is the molecular mass of H2so4 .

Last Answer : is the molecular mass of H2so4

What are the spectator ions in the reaction 2KOH plus H2SO4 and gt2H2O plus K2SO4?

Description : What are the spectator ions in the reaction 2KOH plus H2SO4 and gt2H2O plus K2SO4?

Last Answer : Need answer

What are the resonance structure of h2so4?

Description : What are the resonance structure of h2so4?

Last Answer : Need answer

What of the following reactions demonstrates a synthesis reaction A) Mg plus H2SO4 and gt MgSO4 plus H2 B) 2NaCl and gt 2Na plus Cl2 C) C plus O2 and gt CO2 D) Zn plus 2HCl and gt ZnCl2 plus H2?

Description : What of the following reactions demonstrates a synthesis reaction A) Mg plus H2SO4 and gt MgSO4 plus H2 B) 2NaCl and gt 2Na plus Cl2 C) C plus O2 and gt CO2 D) Zn plus 2HCl and gt ZnCl2 plus H2?

Last Answer : C+O2 →CO2

Why does not silver evolve h2 on reacting with dilute h2so4?

Description : Why does not silver evolve h2 on reacting with dilute h2so4?

Last Answer : Need answer

How many moles of H2SO4 will react with 18mol of Al?

Description : How many moles of H2SO4 will react with 18mol of Al?

Last Answer : Need answer

How many atoms are there in H2SO4?

Description : How many atoms are there in H2SO4?

Last Answer : 14

What is the molecular shape of H2SO4?

Description : What is the molecular shape of H2SO4?

Last Answer : A tetrahedron.

The number of N-MC groups in alkaloids is best estimate with the help of (A) HI (B) H2SO4 (C) (CH3CO)2 CO (D) CH3 Mg I

Description : The number of N-MC groups in alkaloids is best estimate with the help of (A) HI (B) H2SO4 (C) (CH3CO)2 CO (D) CH3 Mg I

Last Answer : Answer : A

Sulphur containing amino acids after catabolism produces a substance which is excreted: (A) SO2 (B) HNO3 (C) H2SO4 (D) H3PO4

Description : Sulphur containing amino acids after catabolism produces a substance which is excreted: (A) SO2 (B) HNO3 (C) H2SO4 (D) H3PO4

Last Answer : Answer : C

The purple ring of Molisch reaction is due to (A) Furfural (B) Furfural + α Napthol (C) °C Napthol (D) Furfurol + H2SO4 + α -Naphthol

Description : The purple ring of Molisch reaction is due to (A) Furfural (B) Furfural + α Napthol (C) °C Napthol (D) Furfurol + H2SO4 + α -Naphthol

Last Answer : B

The surface tension in intestinal lumen between fat droplets and aqueous medium is decreased by (A) Bile Salts (B) Bile acids (C) Conc. H2SO4 (D) Acetic acid

Description : The surface tension in intestinal lumen between fat droplets and aqueous medium is decreased by (A) Bile Salts (B) Bile acids (C) Conc. H2SO4 (D) Acetic acid

Last Answer : A

Glass is soluble in - (1) H2SO4 (2) HCIO4 (3) HNO3 (4) HF

Description : Glass is soluble in - (1) H2SO4 (2) HCIO4 (3) HNO3 (4) HF

Last Answer : (4) HF Explanation: Hydrofluoric acid is a highly corrosive acid, capable of dissolving many materials, especially oxides. Its ability to dissolving lass has been known since the 17th century. It is a solution of hydrogen fluoride in water and is represented by HF.

Which of the following has pH value 7? (1) Pure Water (2) H2SO4 (3) Sodium Carbonate (4) HCl

Description : Which of the following has pH value 7? (1) Pure Water (2) H2SO4 (3) Sodium Carbonate (4) HCl

Last Answer : (1) Pure Water Explanation: In chemistry, pH is a numeric scale used to specify the acidity or basicity of an aqueous solution. Solutions with a pH less than 7 are acidic and solutions with a pH greater than ... basic. Pure water is neutral, being neither an acid nor basic; so it has pH value of 7.

Aquaregia is a mixture of the following in the ratio 1 : 3 by volume– (1) cone. HNO3 and cone. HCL (2) conc. HNO3 and conc. H2SO4 (3) dil. HCl and dil. HNO3 (4) cone. HCl and cone. HNO3

Description : Aquaregia is a mixture of the following in the ratio 1 : 3 by volume– (1) cone. HNO3 and cone. HCL (2) conc. HNO3 and conc. H2SO4 (3) dil. HCl and dil. HNO3 (4) cone. HCl and cone. HNO3

Last Answer : (3) dil. HCl and dil. HNO3 Explanation: Aqua regia or nitro-hydrochloric acid is a highly corrosive mixture of acids which is formed by freshly mixing concentrated Nitric acid (HNO3) and Hydrochloric acid (HCl), optimally in a volume ratio of 1:3. It is used in dissolving gold.

The major use of sulphur is in the manufacture of – (1) H2SO4 (2) H2S (3) SO2 (4) Fungicide

Description : The major use of sulphur is in the manufacture of – (1) H2SO4 (2) H2S (3) SO2 (4) Fungicide

Last Answer : (1) H2SO4 Explanation: The major use of sulphur is in the manufacture of sulphuric acid (H2SO4) which is one of the most important compounds made by the chemical industry. It is used to make, literally, hundreds of compounds needed by almost every industry.

For the COD test of sewage, organic matter is oxidised by K2Cr2O7 in the presence of A. H2SO4 B. HNO3 C. HCl D. None of these

Description : For the COD test of sewage, organic matter is oxidised by K2Cr2O7 in the presence of A. H2SO4 B. HNO3 C. HCl D. None of these

Last Answer : ANS: A

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)