__________ determination is not a very significant and important test for gasoline. (A) Gum & sulphur content (B) Viscosity (C) Octane number (D) Reid vapor pressure

__________ determination is not a very significant and important test
for gasoline.
(A) Gum & sulphur content
(B) Viscosity
(C) Octane number
(D) Reid vapor pressure
by

1 Answer

Answer :

(B) Viscosity
by

Related questions

In catalytic cracking, the (A) Gasoline obtained has a very low octane number (B) Pressure & temperature is very high (C) Gasoline obtained has very high aromatic content (D) Gasoline obtained has very high amount of gum forming compounds

Description : In catalytic cracking, the (A) Gasoline obtained has a very low octane number (B) Pressure & temperature is very high (C) Gasoline obtained has very high aromatic content (D) Gasoline obtained has very high amount of gum forming compounds

Last Answer : (C) Gasoline obtained has very high aromatic content

Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to (A) Increase the yield of light distillates (B) Suppress coke formation (C) Enhance the octane number of gasoline (D) Reduce gum content in gasoline

Description : Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to (A) Increase the yield of ... coke formation (C) Enhance the octane number of gasoline (D) Reduce gum content in gasoline

Last Answer : (B) Suppress coke formation

Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Description : Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Last Answer : (B) Presence of sulphur

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Description : The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Last Answer : (C) Gum forming tendency & thoroughness of refining

Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation(C) Reduce the pour point(D) Increase its octane numbe

Description : Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation (C) Reduce the pour point (D) Increase its octane numbe

Last Answer : (D) Increase its octane numbe

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Phenols are added in gasoline to (A) Improve the octane number(B) Act as an antioxidant(C) Reduce its viscosity(D) Increase its pour point

Description : Phenols are added in gasoline to (A) Improve the octane number (B) Act as an antioxidant (C) Reduce its viscosity (D) Increase its pour point

Last Answer : (B) Act as an antioxidant

Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Description : Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Last Answer : (A) Calorific value

Absolute vapor pressure of petrofuels is found by Reid bomb which is heated in water bath to 100°F. In Reid apparatus, the ratio of the volume of air chamber to that of the liquid fuel chamber is (A) 4 (B) 3 (C) 2 (D) 1

Description : Absolute vapor pressure of petrofuels is found by Reid bomb which is heated in water bath to 100°F. In Reid apparatus, the ratio of the volume of air chamber to that of the liquid fuel chamber is (A) 4 (B) 3 (C) 2 (D) 1

Last Answer : (A) 4

Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Description : Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Last Answer : (C) Vapour locking tendency

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Presence of sulphur in gasoline (A) Leads to corrosion (B) Increases lead susceptibility (C) Decreases gum formation (D) Helps during stabilisatio

Description : Presence of sulphur in gasoline (A) Leads to corrosion (B) Increases lead susceptibility (C) Decreases gum formation (D) Helps during stabilisatio

Last Answer : (A) Leads to corrosion

Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Description : Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Last Answer : (C) Higher flash point and fire point

A good solvent used for absorption should not have very high (A) Viscosity (B) Vapor pressure (C) Freezing point (D) All (A), (B) & (C)

Description : A good solvent used for absorption should not have very high (A) Viscosity (B) Vapor pressure (C) Freezing point (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Description : The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Last Answer : (A) 3

The octane rating of gasoline provides information on(a) its antiknock properties(b) its ignition properties(c) its percentage proportion of octane(d) its percentage content of isooctane

Description : The octane rating of gasoline provides information on (a) its antiknock properties (b) its ignition properties (c) its percentage proportion of octane (d) its percentage content of isooctane

Last Answer : its antiknock properties

Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction(C) Produces high octane number gasoline(D) None of these

Description : Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction (C) Produces high octane number gasoline (D) None of these

Last Answer : (D) None of these

Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased severity of cracking (C) At low pressure, the yield of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Description : Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased ... of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Last Answer : (D) Greater depth of cracking gives lower octane number gasoline

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Octane numbers of motor gasoline used in India and America are respectively (A) 87 & 94 (B) 94 & 87 (C) 94 & 100 (D) 83 & 100

Description : Octane numbers of motor gasoline used in India and America are respectively (A) 87 & 94 (B) 94 & 87 (C) 94 & 100 (D) 83 & 100

Last Answer : (A) 87 & 94

Laboratory determination of the diffusivity of vapor is done by __________ method. (A) Wetted wall column (B) Gilliland's (C) Winkelmann's (D) Wike's

Description : Laboratory determination of the diffusivity of vapor is done by __________ method. (A) Wetted wall column (B) Gilliland's (C) Winkelmann's (D) Wike's

Last Answer : (C) Winkelmann's

Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Description : Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Last Answer : (B) Octane number

Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point

Description : Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (C) Aniline point

A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is the partial pressure of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Description : A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is ... of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Last Answer : 84.6

True vapour pressure of a petroleum fraction __________ Reid vapour pressure. (A) Is less than (B) Is more than (C) Is same as (D) May be either more or less than

Description : True vapour pressure of a petroleum fraction __________ Reid vapour pressure. (A) Is less than (B) Is more than (C) Is same as (D) May be either more or less than

Last Answer : (D) May be either more or less than

Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Description : Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Last Answer : (A) Resistance to knock

Octane number (unleaded) of reformed gasoline may be upto (A) 60 (B) 70 (C) 80 (D) 90

Description : Octane number (unleaded) of reformed gasoline may be upto (A) 60 (B) 70 (C) 80 (D) 90

Last Answer : (D) 90

The octane number of aviation gasoline may be (A) 79 (B) 87 (C) 97 (D) > 100

Description : The octane number of aviation gasoline may be (A) 79 (B) 87 (C) 97 (D) > 100

Last Answer : (D) > 100

Which of the following gasoline (unleaded) has the least octane number? (A) Catalytically cracked gasoline (B) Straight run gasoline (C) Catalytically reformed gasoline (D) Polymer gasoline

Description : Which of the following gasoline (unleaded) has the least octane number? (A) Catalytically cracked gasoline (B) Straight run gasoline (C) Catalytically reformed gasoline (D) Polymer gasoline

Last Answer : (B) Straight run gasoline

Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Description : Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Last Answer : (C) Reforming

Octane number (unleaded) of gasoline produced by isomerisation of butane may be about (A) 45 (B) 55 (C) 70 (D) 90

Description : Octane number (unleaded) of gasoline produced by isomerisation of butane may be about (A) 45 (B) 55 (C) 70 (D) 90

Last Answer : (C) 70

Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97

Description : Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97

Last Answer : (D) 97

During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Description : During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on ... be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Last Answer : (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced)

Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Description : Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Last Answer : (A) Methyl alcohol

High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Description : High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Last Answer : (C) Viscosity

Pick out the wrong statement. (A) Benzopyrene which causes cancer is present in traces in tobacco, charcoal & petrol driven automobile exhaust (B) NO2 is capable of penetrating the troposphere and can absorb both ultraviolet & visible light (C) Hydrocarbon pollutants are produced by sweet gum, oak & natural rubber trees (D) H2S is not at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Description : Pick out the wrong statement. (A) Benzopyrene which causes cancer is present in traces in tobacco, charcoal & petrol driven automobile exhaust (B) NO2 is capable of penetrating the troposphere and ... at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Last Answer : (D) H2S is not at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

The detrimental effect on organism and water quality with temperature rise of aquatic system is the reduction of __________ of water. (A) Dissolved oxygen content (B) Biological oxygen demand (C) Vapor pressure (D) All (A), (B) and (C)

Description : The detrimental effect on organism and water quality with temperature rise of aquatic system is the reduction of __________ of water. (A) Dissolved oxygen content (B) Biological oxygen demand (C) Vapor pressure (D) All (A), (B) and (C)

Last Answer : (A) Dissolved oxygen content

Eschka mixture, which is used for the determination of sulphur in coal, is a mixture of (A) MgO & Na2CO3 (B) MgSO4 & BaCl2 (C) BaSO4 & NaCl (D) MgCO3 & NaC

Description : Eschka mixture, which is used for the determination of sulphur in coal, is a mixture of (A) MgO & Na2CO3 (B) MgSO4 & BaCl2 (C) BaSO4 & NaCl (D) MgCO3 & NaC

Last Answer : (A) MgO & Na2CO3

LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%(D) All (A), (B) and (C))

Description : LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Description : Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Last Answer : (D) None of these

Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Description : Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Last Answer : ANSWER : B

Gasoline with an octane number of 90 is equivalent in knocking characteristics to a mixture of heptane and isooctane of the following composition : (a) 20% heptane + 80% isooctane (b) 90% heptane + 10% isooctane (c) 80% heptane + 20% isooctane (d) 10% heptane + 90% isooctane

Description : Gasoline with an octane number of 90 is equivalent in knocking characteristics to a mixture of heptane and isooctane of the following composition : (a) 20% heptane + 80% isooctane (b) 90% heptane + 10% isooctane (c) 80% heptane + 20% isooctane (d) 10% heptane + 90% isooctane

Last Answer : 10% heptane + 90% isooctane

Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Description : Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Last Answer : Gasoline

Visbreaking (A) Uses natural gas as feed (B) Is carried out at atmospheric pressure (C) Produces fuel oil of lower viscosity (D) Produces gasoline only

Description : Visbreaking (A) Uses natural gas as feed (B) Is carried out at atmospheric pressure (C) Produces fuel oil of lower viscosity (D) Produces gasoline only

Last Answer : (C) Produces fuel oil of lower viscosity

Which of the following is least likely to be required on an audit? a. Review accounting estimates for biases. b. Test appropriateness of journal entries and adjustment. c. Make a legal determination of whether fraud has occurred. d. Evaluate the business rationale for significant unusual transactions

Description : Which of the following is least likely to be required on an audit? a. Review accounting estimates for biases. b. Test appropriateness of journal entries and adjustment. c. ... determination of whether fraud has occurred. d. Evaluate the business rationale for significant unusual transactions

Last Answer : Make a legal determination of whether fraud has occurred.

Which of the following is least likely to be required on an audit? a. Review accounting estimates for biases b. Test appropriateness of journal entries and adjustment c. Make a legal determination of whether fraud has occurred d. Evaluate the business rationale for significant, unusual transactions

Description : Which of the following is least likely to be required on an audit? a. Review accounting estimates for biases b. Test appropriateness of journal entries and adjustment c. Make a legal determination of whether fraud has occurred d. Evaluate the business rationale for significant, unusual transactions

Last Answer : Make a legal determination of whether fraud has occurred

Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Description : Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Last Answer : (D) Density

Is it true that higher octane gasoline is consumed more slowly by engines,and it doesn't pay to purchase regular gasoline solely to save $$ when it is not required for your vehicle?

Description : Is it true that higher octane gasoline is consumed more slowly by engines,and it doesn't pay to purchase regular gasoline solely to save $$ when it is not required for your vehicle?

Last Answer : No it is not true that premium gas burns slower than reg. It is a complete waste of money to use a higher grade than required by the manufacturer.