Which of the following additives improves the cetane number of diesel? (A) Amyl nitrate (B) Ethyl mercaptan (C) Naphthenic acid (D) Tetra ethyl lead

Which of the following additives improves the cetane number of diesel?
(A) Amyl nitrate
(B) Ethyl mercaptan
(C) Naphthenic acid
(D) Tetra ethyl lead
by

1 Answer

Answer :

(B) Ethyl mercaptan
by

Related questions

Anti-knock for compression ignition engines is a) napthene b) tetra ethyl lead c) amyl nitrate d) hexadecane

Description : Anti-knock for compression ignition engines is a) napthene b) tetra ethyl lead c) amyl nitrate d) hexadecane

Last Answer : Answer: c Explanation: Amyl nitrate is the anti-knock for compression ignition engines.

Which of the following is an additive used for improving the cetane number of diesel? (A) Tetraethyl lead (B) Tetramethyllead (C) Ethyl nitrate or acetone (D) None of these

Description : Which of the following is an additive used for improving the cetane number of diesel? (A) Tetraethyl lead (B) Tetramethyllead (C) Ethyl nitrate or acetone (D) None of these

Last Answer : (A) Tetraethyl lead

The two reference fuel used for cetane rating are (a) Cetane and iso octane (b) Cetane and tetra ethyl lead (c) Cetance and n-heptane (d) Cetane and α- methyl naphthalene

Description : The two reference fuel used for cetane rating are (a) Cetane and iso octane (b) Cetane and tetra ethyl lead (c) Cetance and n-heptane (d) Cetane and α- methyl naphthalene

Last Answer : Ans : d

Ethyl mercaptan is added to the Doctor negative LPG for facilitating the detection of its leakage (by bad odour) to the extent of about __________ ppm. (A) 1 (B) 50 (C) 5000 (D) 10000

Description : Ethyl mercaptan is added to the Doctor negative LPG for facilitating the detection of its leakage (by bad odour) to the extent of about __________ ppm. (A) 1 (B) 50 (C) 5000 (D) 10000

Last Answer : (B) 50

Ethyl mercaptan is a/an __________ compound. (A) Sulphur (B) Nitrogen

Description : Ethyl mercaptan is a/an __________ compound. (A) Sulphur (B) Nitrogen

Last Answer : (A) Sulphur

Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation(C) Reduce the pour point(D) Increase its octane numbe

Description : Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation (C) Reduce the pour point (D) Increase its octane numbe

Last Answer : (D) Increase its octane numbe

Which of the following is an organometallic compound? (A) Isopropyl alcohol (B) Tetra-ethyl lead (C) Zeolite (D) Cumene

Description : Which of the following is an organometallic compound? (A) Isopropyl alcohol (B) Tetra-ethyl lead (C) Zeolite (D) Cumene

Last Answer : (B) Tetra-ethyl lead

Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Description : Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Last Answer : (A) Aromatics

Which is an anticing compound? (A) Amyl nitrate (B) Alcohols (C) Mercaptans (D) Pyridine

Description : Which is an anticing compound? (A) Amyl nitrate (B) Alcohols (C) Mercaptans (D) Pyridine

Last Answer : (B) Alcohols

Cetane number of diesel used in trucks may be about (A) 50 (B) 14 (C) 35 (D) 85

Description : Cetane number of diesel used in trucks may be about (A) 50 (B) 14 (C) 35 (D) 85

Last Answer : (A) 50

Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Description : Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Last Answer : (C) Equal to cetane number plus 3

Cetane number of high speed diesel must be ≥ (A) 30 (B) 45 (C) 75 (D) 95

Description : Cetane number of high speed diesel must be ≥ (A) 30 (B) 45 (C) 75 (D) 95

Last Answer : (B) 45

Diesel used in naval applications has a minimum cetane number of (A) 25 (B) 35 (C) 45 (D) 65

Description : Diesel used in naval applications has a minimum cetane number of (A) 25 (B) 35 (C) 45 (D) 65

Last Answer : (C) 45

Cetane number of a diesel fuel is the measure of its (A) Ignition delay (B) Smoke point (C) Viscosity (D) Oxidation stability

Description : Cetane number of a diesel fuel is the measure of its (A) Ignition delay (B) Smoke point (C) Viscosity (D) Oxidation stability

Last Answer : (A) Ignition delay

Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Description : Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Last Answer : (C) Petrol increases its octane number

Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

A fuel of cetane number 40 has the same ignition quality as a mixture of a) 40% cetane and 60% alpha methyl naphthalene b) 40% alpha methyl naphthalene and 60% cetane c) 40% petrol and 60% diesel d) 40% diesel and 60% petrol

Description : A fuel of cetane number 40 has the same ignition quality as a mixture of a) 40% cetane and 60% alpha methyl naphthalene b) 40% alpha methyl naphthalene and 60% cetane c) 40% petrol and 60% diesel d) 40% diesel and 60% petrol

Last Answer : Answer: a Explanation: A fuel of cetane number 40 has the same ignition quality as a mixture of 40% cetane and 60% alpha methyl naphthalene as cetane number is counted on cetane percentage.

The tendency of a diesel engine to knock increases if a. engine speed is increased b. engine power is increased c. cetane number of the fuel is increased d. compression ratio is increased

Description : The tendency of a diesel engine to knock increases if a. engine speed is increased b. engine power is increased c. cetane number of the fuel is increased d. compression ratio is increased

Last Answer : ANSWER d. compression ratio is increased

Ignition quality of diesel is expressed by a. octane number b. cetane number c. calorific value d. carbon content

Description : Ignition quality of diesel is expressed by a. octane number b. cetane number c. calorific value d. carbon content

Last Answer : ANSWER b. cetane number

For the best results of efficient combustion, high speed diesel engines need an approximate cetane number of a. 100 b. 50 c. 10 d. 5

Description : For the best results of efficient combustion, high speed diesel engines need an approximate cetane number of a. 100 b. 50 c. 10 d. 5

Last Answer : ANSWER b. 50

Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Description : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Last Answer : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

A person having osteoporosis is suffering from lead poisoning. Ethlene diamine tetra acetic acid (EDTA) is administered for this condition. The best f

Description : A person having osteoporosis is suffering from lead poisoning. Ethlene diamine tetra acetic acid (EDTA) is administered for this condition. The best f

Last Answer : A person having osteoporosis is suffering from lead poisoning. Ethlene diamine tetra acetic acid (EDTA ... C. disodium salt D. calcium dihydrogen salt

Naphthenic acid is represented by (A) CnH2n+2O2 (B) CnH2n-2O2 (C) CnH2n+2O2 (n ≥ 6) (D) CnH2n+6O2 (n ≤ 6)

Description : Naphthenic acid is represented by (A) CnH2n+2O2 (B) CnH2n-2O2 (C) CnH2n+2O2 (n ≥ 6) (D) CnH2n+6O2 (n ≤ 6)

Last Answer : (B) CnH2n-2O2

In solutizer sweetening process, solutizer solution used is (A) Methanol in Unisol process (B) Naphthenic acid in Mercapsol process (C) Both (A) and (B)

Description : In solutizer sweetening process, solutizer solution used is (A) Methanol in Unisol process (B) Naphthenic acid in Mercapsol process (C) Both (A) and (B)

Last Answer : (C) Both (A) and (B)

Naphthenic acid is a/an __________ compound. (A) Sulphur (B) Nitrogen (C) Oxygen (D) None of these

Description : Naphthenic acid is a/an __________ compound. (A) Sulphur (B) Nitrogen (C) Oxygen (D) None of these

Last Answer : (C) Oxygen

Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Description : Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Last Answer : (A) Extraction with amyl or butyl acetate

Tetra ethyle lead (TEL) is - (1) a catalyst in burning fossil fuel (2) an antioxidant (3) areductant (4) an antiknock compound

Description : Tetra ethyle lead (TEL) is - (1) a catalyst in burning fossil fuel (2) an antioxidant (3) areductant (4) an antiknock compound

Last Answer : (4) an antiknock compound Explanation: Tetraethyl lead was extensively used as an additive to gasoline, wherein it served as an effective antiknock agent and prevented exhaust valve and seat wear. ... needed. Typical formulations called for 1 part of prepared TEL to 1260 parts untreated gasoline.

Tetra ethyle lead (TEL) is (1) a catalyst in burning fossil fuel (2) an antioxidant (3) a reductant (4) an antiknock compound

Description : Tetra ethyle lead (TEL) is (1) a catalyst in burning fossil fuel (2) an antioxidant (3) a reductant (4) an antiknock compound

Last Answer :  an antiknock compound

Which of the following additives are added to plastics to make it impervious to X-rays? (A) Asbestos (B) Barium salt (C) Carborundum (D) Phthalic acid

Description : Which of the following additives are added to plastics to make it impervious to X-rays? (A) Asbestos (B) Barium salt (C) Carborundum (D) Phthalic acid

Last Answer : (B) Barium salt

Which of the following additives/water proofing agents is added to lower the hydrophilic (moisture loving) characteristic of cement? (A) Xanthates (B) Stearic acid (C) Calcium & aluminium stearate (D) Formic acid

Description : Which of the following additives/water proofing agents is added to lower the hydrophilic (moisture loving) characteristic of cement? (A) Xanthates (B) Stearic acid (C) Calcium & aluminium stearate (D) Formic acid

Last Answer : (C) Calcium & aluminium stearate

The characterisation factor of a crude oil is calculated as 12.5. It meansthat; it is(A) Paraffinic(B) Naphthenic(C) Intermediate(D) None of these

Description : The characterisation factor of a crude oil is calculated as 12.5. It meansthat; it is (A) Paraffinic (B) Naphthenic (C) Intermediate (D) None of these

Last Answer : (A) Paraffinic

Crude oil produced by Indian oil fields are predominantly __________ in nature. (A) Paraffinic (B) Naphthenic (C) Asphaltic (D) Mixed base

Description : Crude oil produced by Indian oil fields are predominantly __________ in nature. (A) Paraffinic (B) Naphthenic (C) Asphaltic (D) Mixed base

Last Answer : (C) Asphaltic

. Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature

Description : . Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature

Last Answer : (D) High viscosity index means a large change in viscosity with change in temperature

Both asphalt and wax are produced by __________ base crude oils. (A) Naphthenic (B) Asphalt (C) Paraffin (D) Mixed

Description : Both asphalt and wax are produced by __________ base crude oils. (A) Naphthenic (B) Asphalt (C) Paraffin (D) Mixed

Last Answer : (C) Paraffin

Highest quality bitumen is produced from the __________ crude oil. (A) Paraffinic (B) Naphthenic (C) Intermediate (D) Mixed

Description : Highest quality bitumen is produced from the __________ crude oil. (A) Paraffinic (B) Naphthenic (C) Intermediate (D) Mixed

Last Answer : (B) Naphthenic

__________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic

Description : __________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic

Last Answer : (B) Naphthenic

Which of the following is a vasodilator drug used for hypertension that lacks a direct effect on autonomic receptors but may provoke anginal attacks? (a) Amyl nitrite (b) Hydralazine (c) Isosorbide mononitrate (d) Nifedipine (e) Nimodipine

Description : Which of the following is a vasodilator drug used for hypertension that lacks a direct effect on autonomic receptors but may provoke anginal attacks? (a) Amyl nitrite (b) Hydralazine (c) Isosorbide mononitrate (d) Nifedipine (e) Nimodipine

Last Answer : Ans: B

Which of the following drugs used for the treatment of angina by inhalation has a very rapid onset and a brief duration of effect ? (a) Amyl nitrite (b) Hydralazine (c) Isosorbide mononitrate (d) Nifedipine (e) Nimodipine

Description : Which of the following drugs used for the treatment of angina by inhalation has a very rapid onset and a brief duration of effect ? (a) Amyl nitrite (b) Hydralazine (c) Isosorbide mononitrate (d) Nifedipine (e) Nimodipine

Last Answer : Ans: A

Which of the following is approved for the treatment of hemorrhagic stroke ? (a) Amyl nitrite (b) Hydralazine (c) Isosorbide moninitrate (d) Nifedipine (e) Nimodipine

Description : Which of the following is approved for the treatment of hemorrhagic stroke ? (a) Amyl nitrite (b) Hydralazine (c) Isosorbide moninitrate (d) Nifedipine (e) Nimodipine

Last Answer : Ans: E

The agent given sublingually in an acute attack of angina pectoris is (a) Glyceryl trinitrate (b) Amyl nitrite (c) Erythrital tetranitrate (d) Pentaerythritol tetranitrate

Description : The agent given sublingually in an acute attack of angina pectoris is (a) Glyceryl trinitrate (b) Amyl nitrite (c) Erythrital tetranitrate (d) Pentaerythritol tetranitrate

Last Answer : Ans: A

Which of the following drug can result in result in cyanide poisoning? A. Amyl nitrite B. Hydroxycobalamine C. Sodium nitroprusside D. Sodium thiosulphate

Description : Which of the following drug can result in result in cyanide poisoning? A. Amyl nitrite B. Hydroxycobalamine C. Sodium nitroprusside D. Sodium thiosulphate

Last Answer : C. Sodium nitroprusside 

Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons (b) permission to use only pure diesel with a maximum of 500 ppm sulphur as fuel for vehicles (c) use of non-polluting compressed natural gas (CNG) only as fuel by all buses and trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Description : Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and ... trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Last Answer : (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons

Cetane number of alpha methyl naphthalene is assumed to be (A) 0 (B) 100 (C) 50 (D) ∞

Description : Cetane number of alpha methyl naphthalene is assumed to be (A) 0 (B) 100 (C) 50 (D) ∞

Last Answer : (A) 0

Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Description : Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Last Answer : (B) Octane number

Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Description : Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Last Answer : (A) Aromatics

Write the molecular formulae of: 1. Copper oxide 2. Iron (III) chloride 3. Sodium hydroxide 4. Iron (II) sulphide 5. Lead (II) oxide 6. Hydrogen nitrate (nitric acid) 7. Hydrogen sulphate (sulphuric acid) 8. Calcium hydroxide 9. Magnesium carbonate 10.Ammonium carbonate

Description : Write the molecular formulae of: 1. Copper oxide 2. Iron (III) chloride 3. Sodium hydroxide 4. Iron (II) sulphide 5. Lead (II) oxide 6. Hydrogen nitrate (nitric ... Hydrogen sulphate (sulphuric acid) 8. Calcium hydroxide 9. Magnesium carbonate 10.Ammonium carbonate

Last Answer : 1. Copper oxide - CuO 2. Iron (III) chloride - FeCl3 3. Sodium hydroxide - NaOH 4. Iron (II) sulphide - FeS 5. Lead (II) oxide - PbO 6. Hydrogen nitrate (nitric acid) - HNO3 7. ... ) - H2SO4 8. Calcium hydroxide - Ca(OH)2 9. Magnesium carbonate - MgCO3 10.Ammonium carbonate - (NH4)2CO3

Which is the modified form of batteries in today’s electronic cars? A. Lithium ion B. Nickel iron C. Lead Acid D. Sodium Nitrate

Description : Which is the modified form of batteries in today’s electronic cars? A. Lithium ion B. Nickel iron C. Lead Acid D. Sodium Nitrate

Last Answer : A. Lithium ion

The Refrigerant 'FREON' is – (1) Calcium Tetra Fluoride (2) Difluoro Dichloro Methane (3) Fluorspar and Felspar (4) Hydrofluosilicic Acid

Description : The Refrigerant 'FREON' is – (1) Calcium Tetra Fluoride (2) Difluoro Dichloro Methane (3) Fluorspar and Felspar (4) Hydrofluosilicic Acid

Last Answer : (2) Difluoro Dichloro Methane Explanation: Dichlorodifluorornethane (R-12), is a colourless gas, and usually sold under the brand name Freon-12, is a chlorofluorocarbon halornethane (CFC), used as a ... 1994 clue to concerns about damage to the ozone layer. It is soluble in many organic solvents.

How many EDTA (lethylendiamine tetra acetic acid) molecules are required to make an octahedral complex with a Ca2+ ion.

Description : How many EDTA (lethylendiamine tetra acetic acid) molecules are required to make an octahedral complex with a Ca2+ ion.

Last Answer : EDTA is a hexadentate ligand therefore only one EDTA molecule is required to form octahedral complex. 

Which one of the following tests employs Ethylene Diamine Tetra Acetic Acid as a titrating agent? (a) Chlorides (b) Dissolved oxygen (c) Hardness (d) Residual chlorine

Description : Which one of the following tests employs Ethylene Diamine Tetra Acetic Acid as a titrating agent? (a) Chlorides (b) Dissolved oxygen (c) Hardness (d) Residual chlorine

Last Answer : (c) Hardness