Description : A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke ... ) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine
Last Answer : Ans :c
Description : Piston speed is equal to a. stroke x rpm b. (stroke x rpm) / 2 c. 2 x stroke x rpm d. 4 x stroke x rpm
Last Answer : ANSWER c. 2 x stroke x rpm
Description : A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about a.6000 m b.1500 m c.3000 m d.2000 m e.1000 m
Last Answer : a. 6000 m
Description : A 4S diesel engine, when running at 2000 rpm has an injection duration of 1.5 ms.What is the corresponding of the crank angle in degrees? (a) 18° (b) 9° (c)36° (d) 15°
Last Answer : Ans :a
Description : International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these
Last Answer : a) 1000,1500 & 2500
Description : Two observation wells penetrating into a confined aquifer are located 1500 m apart in the direction of flow. Heads of 50 m and 25 m are indicated at these two observation wells. If the coefficient of permeability for the ... well to another is (a) 75 days (b) 750 days (c) 1200 days (d) 3000 days
Last Answer : (b) 750 days
Description : The charging reactance of 50 Km length of line is 1500Ω. The charging reactance for 100Km length of line will be (A) 1500 Ω (B) 3000 Ω (C) 750 Ω (D) 600 Ω
Last Answer : Ans: B Characteristic reactance per km = 1500/50 = 30 ohms ∴ Characteristic reactance per 100km = 30 x 100 = 3000 ohms
Description : A grinding wheel rotates at 3000 rpm. When power supply is cut-off the wheel stops in 10 seconds. The number of revolutions made by the wheel before coming to rest would be a.1500 b.3000 c.1000 d.250 e.500
Last Answer : d. 250
Description : Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000
Last Answer : (b) 2000
Description : A reciprocating compressor is not suitable for use as a supercharger because: A. it runs at lower rpm B. the pressure ratio is high C. volumetric efficiency is high D. it is bulky and can handle small quantity of air
Last Answer : ANSWER : D
Description : Detonation can be controlled by a. varying the compression ratio b. using lean mixture c. retarding the spark timing d. reducing the rpm
Last Answer : ANSWER c. retarding the spark timing
Description : The number of poles in a phase induction motor at 50 Hz and running at 1500 rpm will be?
Last Answer : The number of poles in a phase induction motor at 50 Hz and running at 1500 rpm will be 4.
Description : In two stroke engine one power occurs in _______ of crank rotation A. 180° B. 360° C. 270° D. 720°
Last Answer : ANSWER : B
Description : The actual volume of fresh charge admitted in 4-stroke petrol engine is A. equal to stroke volume B. equal stroke volume and clearance volume C. less than stroke volume D. more than stroke volume
Last Answer : ANSWER : C
Description : Morse test is conducted on the engine to calculate the mechanical efficiency of A. single cylinder CI engine B. single cylinder SI engine C. only on two stroke engines D. multi cylinder engine
Description : In a typical medium speed 4- stroke Diesel engine, the inlet valve A. opens 20°before top dead centre and closes at 35°afterthebottomdead centre. B. opens up at top dead centre and closes at bottomdead centre C. may open orcloseanywhere D. remains open for 200°
Last Answer : ANSWER : A
Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on
Description : In four stroke engine there is one power stroke in _____ of crankshaft rotation. a. 180° b. 360° c. 540° d. 720° (Ans:d)
Last Answer : The ascending order of strokes in four stroke engine is a. Suction stroke - Expansion stroke - Compression stroke - Exhaust stroke b. Suction stroke - Compression stroke - Expansion stroke -Exhaust ... stroke d. Suction stroke - Compression stroke - Exhaust stroke - Expansion stroke (Ans:b)
Description : In two stroke engine, which of the following functions are performed at the same time? a. Compression and exhaust b. Intake and Expansion c. Intake and exhaust d. Intake and compression (Ans:c)
Last Answer : The compression ratio in a Compression Ignition (CI) engine is generally in between a. 8 to 13 b. 14 to 23 c. 20 to 28 d. 25 to 32 (Ans:b)
Description : Fuel is injected into the cylinder at the end of ______________ stroke. a) suction b) compression c) expansion d) exhaust
Last Answer : Answer: b Explanation: Fuel is injected into the cylinder at the end of compression stroke and not at suction or expansion stroke.
Description : For same power output and same r, as compared to 2- stroke engines, four stroke SI engines have (a) Higher fuel consumption (b) Lower thermal efficiency (c) Highest exhaust temperatures (d) Higher thermal efficiency
Last Answer : Ans :d
Description : A gas engine has a volume of 300 cc and clearance volume of 25 cc. Its volumetric efficiency is 0.8 and mech efficiency is 0.9. What is the volume of the mixture taken in per stroke? (a) 248 cc (b) 252 cc (c) 264 cc (d) 286 cc
Last Answer : Ans : c
Description : The ratio of work done per cycle to the stroke volume of the compressor is known as A. Compressor capacity B. Compression ratio C. Compressor efficiency D. Mean effective pressure
Description : In a single acting reciprocating compressor, the suction, compression and delivery of air takes place in A. One stroke B. Two stroke C. Three stroke D. Four stroke
Description : For low load operation more economical engine is a. petrol engine b. diesel engine c. muticylinder engine d. two stroke engine
Last Answer : ANSWER b. diesel engine
Description : Which of the following engine can work on very lean mixture a. Spark ignition engine b. compression ignition engine c. two stroke engine d. Four stroke engine
Last Answer : ANSWER b. compression ignition engine
Description : The term scavenging is generally associated with a. 2-stroke engine b. 4-stroke engine c. high efficiency engine d. diesel engine
Last Answer : ANSWER C. high efficiency engine
Description : An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per ... kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ
Last Answer : ANSWER d. 973.5 kJ
Description : Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke
Last Answer : ANSWER d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke
Description : Common rail injection system uses injection pressures of the order a) 100-200 bar b) 200-400 bar c) 400-600 bar d) 1500 bar
Last Answer : Answer: d Explanation: Generally, common rail injection system uses injection pressures of the order 1500 bar.
Description : The maximum temperature in the I.C engine cylinder is of the order of a. 500 – 1000 C b. 1000 – 1500 C c. 1500 – 2000 C d. 2000 – 2500 C
Last Answer : ANSWER d. 2000 – 2500 C
Description : When the speed of a turbine is 6000 rpm, it takes _____ seconds for the turbine to complete one revolution. a)0.1 sec b)0.0001sec c)10sec d)0.001sec
Last Answer : c)10sec
Description : While the fuel fired furnace can be used upto a maximum temperature of about 1700°C, the electric furnace can be used upto a temperature of about __________ °C. (A) 2000 (B) 3000 (C) 4500 (D) 6000
Last Answer : (C) 4500
Description : A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000
Last Answer : (D) 10000 to 100000
Description : Roundabouts are not suitable if number of vehicles exceed (A) 3000 (B) 4000 (C) 5000 (D) 6000
Last Answer : Answer: Option A
Description : Ravi, Rakesh and Vijay invest in a partnership in the ratio 7/2, 4/3, 6/5 respectively. After 4 months, Ravi increases his share 50%. If the total profit at the and of one year be Rs. 32,400, then what is Rakesh's ... the profit? 1) Rs. 2000 2) Rs. 3000 3) Rs. 4000 4) Rs. 5000 5) Rs. 6000
Last Answer : 5) Rs. 6000
Description : Calculate re-order level from the following: Safety stock: 1000 units Consumption per week: 500 units It takes 12 weeks to reach material from the date of ordering. (a) 1000 units (b) 6000 units (c) 3000 units (d) 7000 units
Last Answer : (d) 7000 units
Description : The average monthly salary of directors & office boys of an organization Rs. 3750. Then the average salary of all directors is Rs. 6000 while that of all office boys is Rs. 3000 per month. If there are 120 employees in the ... find the ratio of manager and office boy. A) 2:5 B) 3:1 C) 1:3 D) 5:2
Last Answer : C) let the number of director be X and office boy be 120-x total salary of director and office boy = 120*3750 = Rs.450000 total salary of director = 6000x total salary of office boy = 3000* (120 - ... director number of office boy = 120-30 = 90 ratio of director to office boy = 30:90 = 1:3
Description : mouli had $ 3600 left after spending 40 % of the money he took for shopping. How much money did he take along with him? a) 2500 b) 6000 c) 4500 d) 3000 e) 9800
Last Answer : Answer: B Let the money he took for shopping be x. Money he spent = 40 % of x = 40/100 x = 4/10 x Money left with him = x - 4/10 x = (10x - 4x)/10 = 6x/10 But money left with ... 6x/10 = 3600 x = 3600 10/6 x = 36000/6 x = 6000 Therefore, the money he took for shopping is 6000.
Description : A four-pole induction motor, operating on three-phase 60 cycle current will operate at approximately ___________. A. 850 RPM B. 1,150 RPM C. 1,750 RPM D. 3,550 RPM
Last Answer : Answer: C
Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750
Last Answer : (A) 500
Description : An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load slip of 3 percent. The full load speed of the induction motor will be: A) 1000 rpm B) 920 rpm C) 950 rpm D) 970 rpm
Last Answer : An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load slip of 3 percent. The full load speed of the induction motor will be: 970 rpm
Description : Some amount out of Rs.8500 was lent at 5% per annum and the remaining was lent at 3% per annum. If the total simple interest from both the fractions in4 years was Rs.1500, the sum lent at 5% per annum was a) Rs. 2400 b) Rs. 2200 c) Rs. 2000 d) Rs. 6000
Last Answer : D Total simple interest received , I = Rs.1500 Principal , p = 8500 period, n = 4 years Rate of interest, r = ? Simple Interest, I=PNR/100 1500 = ( 8500 4 r )/ 100 = ... total amount is Rs.8500. Therefore, the amount lent at 5% per annum (part1 amount) = 8500x12/17 = 6000
Description : A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000
Last Answer : c. 250
Description : A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was a.1 rad/s2 b.31.4 rad/s2 c.4 rad/s2 d.62.8 rad/s2 e.10.4 rad/s2
Last Answer : b. 31.4 rad/s2
Description : Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500
Last Answer : (A) 600-750
Description : Speed of sound in water is 1500 m s-1, depth of water when reflected sound waves are detected after 0.40 s is A. 700 m B. 600 km C. 600 m D. 750 km
Last Answer : 600 m
Description : The cutter bar of a tractor operated on owner makes strokes/min (a) 400 – 500 (b) 500 – 750 (c) 800 – 1200 (d) 1250 – 1500
Last Answer : (c) 800 – 1200
Description : The average thickness of ozone layer in stratosphere is about __________ dobson unit (DU). (A) 20 (B) 230 (C) 750 (D) 1500
Last Answer : (B) 230