A blender has a power of 0.3 kW. It is used to make a fruit smoothie, which takes 50 seconds. How much energy is used Give your answer in kilojoules.kJ?

A blender has a power of 0.3 kW. It is used to make a fruit smoothie, which takes 50 seconds. How much energy is used Give your answer in kilojoules.kJ?
by

1 Answer

Answer :

15 KJ
by
selected by

Related questions

What is the cheapest smoothie type blender you have bought that has worked out for you?

Description : What is the cheapest smoothie type blender you have bought that has worked out for you?

Last Answer : Oster 6706 6-Cup Plastic Jar 10-Speed Blender, Black

One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW

Description : One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW

Last Answer : (C) 50 kJ/sec

An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Description : An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Last Answer : Ans :b

A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is a.500 KJ b.50.96 KJ c.101.92 KJ d.None of the above e.Tapered bearing

Description : A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is a.500 KJ b.50.96 KJ c.101.92 KJ d.None of the above e.Tapered bearing

Last Answer : a. 500 KJ

A 45 kilogram bicyclist on a 5 kilogram bicycle rides down a 50 meter high hill with her brakes partially on. Her speed at the bottom of the hill is 10 meters per second. How many kilojoules of heat were dissipated by the cyclist's brakes?

Description : A 45 kilogram bicyclist on a 5 kilogram bicycle rides down a 50 meter high hill with her brakes partially on. Her speed at the bottom of the hill is 10 meters per second. How many kilojoules of heat were dissipated by the cyclist's brakes?

Last Answer : ANSWER: 22.5 KILOJOULES or 22.0 KILOJOULES (based on 9.8 m/s2)

A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W

Description : A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W

Last Answer : Ans: 0.04, 1160 W

A kilogram of water goes from 90 degrees Celsius to 10 degrees Celsius in a period of 2 hours. If the specific heat of water is 4 kilojoules per kilogram per degree Celsius, how much heat has the water lost?

Description : A kilogram of water goes from 90 degrees Celsius to 10 degrees Celsius in a period of 2 hours. If the specific heat of water is 4 kilojoules per kilogram per degree Celsius, how much heat has the water lost?

Last Answer : ANSWER: 320 KILOJOULES or 320,000 JOULES

How long does it takes to digest a green smoothie?

Description : How long does it takes to digest a green smoothie?

Last Answer : Feel Free to Answer

A person takes `1//2` kg of cheese sandwitches of energy equivalent to `813 kJ`. Suppose that all the energy is lost only through perspiration, what m

Description : A person takes `1//2` kg of cheese sandwitches of energy equivalent to `813 kJ`. Suppose that all the energy is lost only through perspiration, what m

Last Answer : A person takes `1//2` kg of cheese sandwitches of energy equivalent to `813 kJ`. Suppose that all the energy is ... A. 360g B. 3.6 g C. 180g D. 190g

Raw Green Smoothie Recipe without Fruits or low GI fruit...Help? (Details)

Description : Raw Green Smoothie Recipe without Fruits or low GI fruit...Help? (Details)

Last Answer : answer:The G.I. Diet page has a list of low-GI fruits. Perhaps you can throw some of them into your favorite smoothie? Fruits Low GI Cherries 22 Plums 24 Grapefruit 25 Peaches 28 Peach, ... Dried Apricots 32 Grapes 43 Coconut 45 Coconut Milk 41 Kiwi Fruit 47 Oranges 40 Strawberries 40 Prunes 29

Where can I find a real fruit smoothie at a boba place in San Jose, CA?

Description : Where can I find a real fruit smoothie at a boba place in San Jose, CA?

Last Answer : I would say, Banana Crepe in Down town San Jose on seventh street.

Organic Smoothie Fruit and Veggie Smoothie

Description : Organic Smoothie Fruit and Veggie Smoothie

Last Answer : Fruit and Veggie Smoothie An easy to make healthy organic smoothie recipe use all or mostly organic fruits and vegetables. Ingredients: - 1 apple - 1 kiwi - 1 cup grapes - 1 cup celery - 1 cup ... hours in the fridge (the flavors will blend better). Kids will love it and it so healthy for them.

How many kilojoules of heat are generated when two basic methane are taught ?

Description : How many kilojoules of heat are generated when two basic methane are taught ?

Last Answer : When two basic methane are taught, 180 kilojoules of heat is generated.

A meter whose constant is 600 revolutions/kWh makes 5 revolutions in 20 seconds. Calculate the load in kW.

Description : A meter whose constant is 600 revolutions/kWh makes 5 revolutions in 20 seconds. Calculate the load in kW. (1) 0.5 kW (2) 1 kW (3) 1.5 kW (4) 2 kW  

Last Answer : 1.5 kW 

What is a blender that really crushes ice and frozen fruit?

Description : What is a blender that really crushes ice and frozen fruit?

Last Answer : Get a blender from Blendtec. Aren’t those the kind they used on “Will It Blend” to blend iPods and crazy stuff like that? I’m assuming they’re crazy expensive though. We have this in our house and have never had any issues.

A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. ...

Description : A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. A delta connected 3-phase capacitor is used to improve the power factor to unity. The capacitance perphase of the capacitor in micro-farads is?

Last Answer : A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. A delta connected 3-phase capacitor is used to improve the power factor to unity. The capacitance perphase of the capacitor in micro-farads is 1.316.

A metro train 200 metres long takes 12 seconds to cross a man walking at 10 km/hr in a opposite to that of the train. Find the speed of the train? A) 50 km/hr B) 60km/hr C) 130km/hr D) 140km/hr

Description : A metro train 200 metres long takes 12 seconds to cross a man walking at 10 km/hr in a opposite to that of the train. Find the speed of the train? A) 50 km/hr B) 60km/hr C) 130km/hr D) 140km/hr

Last Answer : ANSWER: A Explanation:  Length of the train = 200 m  Man walking speed = 10 km/hr  Let the speed of the train be x' km/hr  Speed of the train relative to man = (x +10) km/hr  Convert km/hr into m/s   ... = 60(x +10)  3600 = 60x +600  60x = 3000 X = 50  So speed of the train is 110km/hr.

How much is the required minimum power output of an international AM BC stations? A. 5 kW B. 30 kW C. 10 kW D. 50 kW

Description : How much is the required minimum power output of an international AM BC stations? A. 5 kW B. 30 kW C. 10 kW D. 50 kW

Last Answer : D. 50 kW

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Description : A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Last Answer : Ans :c

Generators at a power station produce electric power at voltage A. 45 kW B. 50 kW C. 60 kW D. 25 kW

Description : Generators at a power station produce electric power at voltage A. 45 kW B. 50 kW C. 60 kW D. 25 kW

Last Answer : 25 kW

Weight per unit of drawbar power is generally ranges between a)50-120kg/kw b)120-150kg/kw c)150-250kg/kw d)250-300kg/kw

Description : Weight per unit of drawbar power is generally ranges between a)50-120kg/kw b)120-150kg/kw c)150-250kg/kw d)250-300kg/kw

Last Answer : a)50-120kg/kw

Grid cables are 15 km long with a resistance of 0.20 Ω km-1, powers wasted as heat in these cables are A. 50 kW B. 60 kW C. 20 kW D. 30 kW

Description : Grid cables are 15 km long with a resistance of 0.20 Ω km-1, powers wasted as heat in these cables are A. 50 kW B. 60 kW C. 20 kW D. 30 kW

Last Answer : 30 kW

The corona loss in a 50 Hz system is 0.25 kW/ph/km. At a frequency of 60 Hz, the corona loss

Description : The corona loss in a 50 Hz system is 0.25 kW/ph/km. At a frequency of 60 Hz, the corona loss would be   (a) 0.30 kW/ph/km (b) 0.36 kW/ph/km (c) 028 kW/ph/km (d) 0.21 kW/ph/km

Last Answer : The corona loss in a 50 Hz system is 0.25 kW/ph/km. At a frequency of 60 Hz, the corona loss would be 028 kW/ph/km

What is the answer to The value in the blender cannot exceed 8 cup?

Description : What is the answer to The value in the blender cannot exceed 8 cup?

Last Answer : The answer is not to put more than 8 cups in the blender.

What volume of water can be boiled boiled by 3.0 KJ of energy?

Description : What volume of water can be boiled boiled by 3.0 KJ of energy?

Last Answer : 3.0 kJ × 1 mol/40.65 kJ× 18.02 g/mol × 1 mL/1 g= 1.3 mL

What volume of water can be boiled boiled by 3.0 KJ of energy?

Description : What volume of water can be boiled boiled by 3.0 KJ of energy?

Last Answer : 3.0 kJ × 1 mol/40.65 kJ× 18.02 g/mol × 1 mL/1 g= 1.3 mL

A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 x10^6 kJ  D. 2 x10^6 kJ Formula: fromthe steamtable vƒ = 0.001043 m^3 / kg vg = 1.6940 m^3 / kg u ƒ= 417.3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Description : A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 ... 3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Last Answer : 2 x10^6 kJ

A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC+ve polarity, and a ROL:of 180mm per min. What would be the arc energy? a) Insufficient information given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

When supposing that it takes 0.6 seconds for a mass on a spring to move from its highest position to its lowest position. What is the period of the spring?

Description : When supposing that it takes 0.6 seconds for a mass on a spring to move from its highest position to its lowest position. What is the period of the spring?

Last Answer : Need answer

When the speed of a turbine is 6000 rpm, it takes _____ seconds for the turbine to complete one revolution. a)0.1 sec b)0.0001sec c)10sec d)0.001sec

Description : When the speed of a turbine is 6000 rpm, it takes _____ seconds for the turbine to complete one revolution. a)0.1 sec b)0.0001sec c)10sec d)0.001sec

Last Answer : c)10sec

Is the blender energy star rated?

Description : Is the blender energy star rated?

Last Answer : No, this blender is not energy star rated.

If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Description : If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Last Answer : C. 100 μV/m

Two alternators rated are 200 KW at 4% regulation, 400 KW 5% regulation operating in parallel at 50HZ , when supply 600 KW the new frequency is a) 50 b) 49 c) 51.3 d) 47.7

Description : Two alternators rated are 200 KW at 4% regulation, 400 KW 5% regulation operating in parallel at 50HZ , when supply 600 KW the new frequency is a) 50 b) 49 c) 51.3 d) 47.7

Last Answer : Ans: 47.7

A 3-phase, 400 votts, 50 Hz, 100 KW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a rotor speed of (A) 1500 rpm (B) 1470 rpm (C) 1530 rpm (D) 1570 rpm

Description : A 3-phase, 400 votts, 50 Hz, 100 KW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a rotor speed of (A) 1500 rpm (B) 1470 rpm (C) 1530 rpm (D) 1570 rpm

Last Answer : Ans: B N = NS (1-S) and NS =120 f / p =120 x 50 /4 = 1500 rpm ∴N= 1500 (1-0.02) =1470 rpm

A 50 KVA transformer has iron loss 2 kW on full load. Calculate its iron loss at 75% of full load.

Description : A 50 KVA transformer has iron loss 2 kW on full load. Calculate its iron loss at 75% of full load.

Last Answer : Iron loss is dependent on voltage and independent of load. Hence iron loss at 75% of Load = Iron loss at full load = 2 kW

A three-phase, 440 V, 50 Hz ac mains fed thyristor bridge is feeding a 440 V dc, 15 kW, 1500 rpm separately

Description : A three-phase, 440 V, 50 Hz ac mains fed thyristor bridge is feeding a 440 V dc, 15 kW, 1500 rpm separately excited dc motor with a ripple free continuous current in the dc link under all operating conditions, Neglecting the ... at half the rated speed is  (A) 0.354 (B) 0.372 (C) 0.90 (D) 0.955

Last Answer : A three-phase, 440 V, 50 Hz ac mains fed thyristor bridge is feeding a 440 V dc, 15 kW, 1500 rpm separately excited dc motor with a ripple free continuous current in the dc link under all operating conditions, Neglecting the losses, the power factor of the ac mains at half the rated speed is 0.354

A three-phase, fully controlled thyristor bridge converter is used as line commutated inverter to feed 50 kW

Description : A three-phase, fully controlled thyristor bridge converter is used as line commutated inverter to feed 50 kW power 420 V dc to a three-phase, 415 V(line), 50 Hz ac mains. Consider dc link current to be constant. The rms current of the thyristor is  (A) 119.05 A (B) 79.37 A (C) 68.73 A (D) 39.68 A

Last Answer : A three-phase, fully controlled thyristor bridge converter is used as line commutated inverter to feed 50 kW power 420 V dc to a three-phase, 415 V(line), 50 Hz ac mains. Consider dc link current to be constant. The rms current of the thyristor is 68.73 A

A 400 V, 15 kW, 4-pole, 50 Hz, Y-connected induction motor has full load slip of 4%. The output torque of the

Description : A 400 V, 15 kW, 4-pole, 50 Hz, Y-connected induction motor has full load slip of 4%. The output torque of the machine at full load is  (A) 1.66 Nm (B) 95.50 Nm (C) 99.47 Nm (D) 624.73 Nm

Last Answer : A 400 V, 15 kW, 4-pole, 50 Hz, Y-connected induction motor has full load slip of 4%. The output torque of the machine at full load is 99.47 Nm

A 50 kW dc shunt is loaded to draw rated armature current at any given speed. When driven

Description : A 50 kW dc shunt is loaded to draw rated armature current at any given speed. When driven  (i) at half the rated speed by armature voltage control and (ii) at 1.5 times the rated speed by field control, the respective output powers ... kW in (i) and 75 kW in (ii) (D) 50 kW in (i) and 50 kW in (ii)

Last Answer : A 50 kW dc shunt is loaded to draw rated armature current at any given speed. When driven  (i) at half the rated speed by armature voltage control and (ii) at 1.5 times the rated speed by field control, the respective output ... kW in (i) and 75 kW in (ii) (D) 50 kW in (i) and 50 kW in (ii)

The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated

Description : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor ... Hz supply is  (A) 58.5 A (B) 45.0 A (C) 42.7 A (D) 55.6 A

Last Answer : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor is connected to a 236 , V 57 Hz supply is 45.0 A 

A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA.

Description : A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is

Last Answer : A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is 80 MJ

The corona loss of a 3-phase transmission line is 100 kW at 60 kV/phase and 25 kW at 50 kV/phase....

Description : The corona loss of a 3-phase transmission line is 100 kW at 60 kV/phase and 25 kW at 50 kV/phase. The disruptive critical voltage is (A) 40 kV (B) 43.6 kV (C) 49.6 kV (D) 50 kV

Last Answer : The corona loss of a 3-phase transmission line is 100 kW at 60 kV/phase and 25 kW at 50 kV/phase. The disruptive critical voltage is 40 kV

A 3 phase, 400 volts, 50 Hz, 100 kW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a...

Description : A 3 phase, 400 volts, 50 Hz, 100 kW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a rotor speed of: (A) 1500 rpm (B) 1470 rpm (C) 1530 rpm (D) 1570 rpm

Last Answer : 1470rpm

The corona loss on a particular system at 50 Hz is 1 kw/phase per km....

Description : The corona loss on a particular system at 50 Hz is 1 kw/phase per km. The corona loss on the same system with supply frequency 25 Hz will be?

Last Answer : The corona loss on a particular system at 50 Hz is 1 kw/phase per km. The corona loss on the same system with supply frequency 25 Hz will be 0.667 kW/phase/km.

What kind of power converter do I need to power two small refrigerators and a blender?

Description : What kind of power converter do I need to power two small refrigerators and a blender?

Last Answer : You will need a large universal converter since you are placing two or more items into a socket.

In a fruit ********, for every 30 ml of orange juice you need 20 ml of apple juice and 50 ml of coconut milk. What proportion of the ******** is orange juice Give your answer as a fraction in its simplest form.?

Description : In a fruit cocktail, for every 30 ml of orange juice you need 20 ml of apple juice and 50 ml of coconut milk. What proportion of the cocktail is orange juice Give your answer as a fraction in its simplest form.?

Last Answer : 98

Which of the following statements is correct concerning the motor performance curves and data table shown in the illustration? EL-0006 A. The motor RPM at full load is 1737 RPM. B. The motor draws 12.62 kw from the switchboard when operating at full load. C. If the motor was developing 10 HP its power factor would be 0.92. D. All of the above.

Description : Which of the following statements is correct concerning the motor performance curves and data table shown in the illustration? EL-0006 A. The motor RPM at full load is 1737 RPM. B. The motor draws 12.62 kw ... If the motor was developing 10 HP its power factor would be 0.92. D. All of the above.

Last Answer : Answer: D