What volume of water can be boiled boiled by 3.0 KJ of energy?

What volume of water can be boiled boiled by 3.0 KJ of energy?
by

1 Answer

Answer :

3.0 kJ × 1 mol/40.65 kJ× 18.02 g/mol × 1 mL/1 g= 1.3 mL
by

Related questions

What volume of water can be boiled boiled by 3.0 KJ of energy?

Description : What volume of water can be boiled boiled by 3.0 KJ of energy?

Last Answer : 3.0 kJ × 1 mol/40.65 kJ× 18.02 g/mol × 1 mL/1 g= 1.3 mL

What volume of water can be boiled by 3 kJ of energy?

Description : What volume of water can be boiled by 3 kJ of energy?

Last Answer : 1.3 ml(Apex's answer)

A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Description : A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Last Answer : Answer : b

Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Last Answer : 12 kJ

A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system.  a. 5 kJ  b. 15 kJ  c. 10 kJ  d. 12 kJ

Description : A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system.  a. 5 kJ  b. 15 kJ  c. 10 kJ  d. 12 kJ

Last Answer : 12 kJ

An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per cycle is 1800 kJ/kg, then work output per cycle per kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Description : An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per ... kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Last Answer : ANSWER d. 973.5 kJ

There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and there are also added 105.5 kJ of heat. Determine t2. (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Last Answer : 999 K

A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 x10^6 kJ  D. 2 x10^6 kJ Formula: fromthe steamtable vƒ = 0.001043 m^3 / kg vg = 1.6940 m^3 / kg u ƒ= 417.3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Description : A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 ... 3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Last Answer : 2 x10^6 kJ

A blender has a power of 0.3 kW. It is used to make a fruit smoothie, which takes 50 seconds. How much energy is used Give your answer in kilojoules.kJ?

Description : A blender has a power of 0.3 kW. It is used to make a fruit smoothie, which takes 50 seconds. How much energy is used Give your answer in kilojoules.kJ?

Last Answer : 15 KJ

A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC+ve polarity, and a ROL:of 180mm per min. What would be the arc energy? a) Insufficient information given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

How much calorie of energy is released by a boiled egg? (1) 40 (2) 50 (3) 60 (4) 77

Description : How much calorie of energy is released by a boiled egg? (1) 40 (2) 50 (3) 60 (4) 77

Last Answer : (4) 77 Explanation: 77-78 calories are released in a large size boiled egg. Boiled eggs are eggs (typically chicken eggs) cooked by immersion in boiling water with their shells unbroken.

How much calorie of energy is released by a boiled egg ? (1) 40 (2) 50 (3) 60 (4) 77

Description : How much calorie of energy is released by a boiled egg ? (1) 40 (2) 50 (3) 60 (4) 77

Last Answer : 77

A person takes `1//2` kg of cheese sandwitches of energy equivalent to `813 kJ`. Suppose that all the energy is lost only through perspiration, what m

Description : A person takes `1//2` kg of cheese sandwitches of energy equivalent to `813 kJ`. Suppose that all the energy is lost only through perspiration, what m

Last Answer : A person takes `1//2` kg of cheese sandwitches of energy equivalent to `813 kJ`. Suppose that all the energy is ... A. 360g B. 3.6 g C. 180g D. 190g

How is the h fusion used to calculate the mass of a solid that 1 kj of energy will melt?

Description : How is the h fusion used to calculate the mass of a solid that 1 kj of energy will melt?

Last Answer : What is the answer ?

If a reaction has an enthalpy of -54.32 kJ/mol and an entropy of -354.2 J/(K*mol), what is the Gibbs free Energy at 54.3(degrees c)?

Description : If a reaction has an enthalpy of -54.32 kJ/mol and an entropy of -354.2 J/(K*mol), what is the Gibbs free Energy at 54.3(degrees c)?

Last Answer : DeltaG = DeltaH - TDeltaS dG = -54.32 kJ/mol - (54'32+273)K(-354.2J/molK) NB Thevtemperature is quoted in Kelvin(K) and the Entropy must be converted to kJ by dividing by '1000'/ Hence dG = ... 115.94 kJ/mol dG = (+)61.61 kJ/mol Since dG is positive, the reaction is NOT thermodynamically feasible.

Standard free energy (∆G°) of hydrolysis of creatine phosphate is (A) -–51.4 KJ/mol (B) –43.1 KJ/mol (C) –30.5 KJ/mol (D) –15.9 KJ/mol

Description : Standard free energy (∆G°) of hydrolysis of creatine phosphate is (A) -–51.4 KJ/mol (B) –43.1 KJ/mol (C) –30.5 KJ/mol (D) –15.9 KJ/mol

Last Answer : Answer : B

Standard free energy (∆G°) of hydrolysis of phosphoenolpyruvate is (A) –61.9 KJ/mol (B) –43.1 KJ/mol (C) –14.2 KJ/mol (D) –9.2 KJ/mol

Description : Standard free energy (∆G°) of hydrolysis of phosphoenolpyruvate is (A) –61.9 KJ/mol (B) –43.1 KJ/mol (C) –14.2 KJ/mol (D) –9.2 KJ/mol

Last Answer : Answer : A

Standard free energy (∆G°) of hydrolysis of ADP to AMP + Pi is (A) –43.3 KJ/mol (B) –30.5 KJ/mol (C) –27.6 KJ/mol (D) –15.9 KJ/mol

Description : Standard free energy (∆G°) of hydrolysis of ADP to AMP + Pi is (A) –43.3 KJ/mol (B) –30.5 KJ/mol (C) –27.6 KJ/mol (D) –15.9 KJ/mol

Last Answer : Answer : C

Standard free energy (∆G°) of hydrolysis of ATP to ADP + Pi is (A) –49.3 KJ/mol (B) –4.93 KJ/mol (C) –30.5 KJ/mol (D) –20.9 KJ/mol

Description : Standard free energy (∆G°) of hydrolysis of ATP to ADP + Pi is (A) –49.3 KJ/mol (B) –4.93 KJ/mol (C) –30.5 KJ/mol (D) –20.9 KJ/mol

Last Answer : Answer : C

The ionisation energy of hydrogen atom in the ground state is x KJ. The energy required for an electron to jump from 2nd orbit to 3rd orbit is?

Description : The ionisation energy of hydrogen atom in the ground state is x KJ. The energy required for an electron to jump from 2nd orbit to 3rd orbit is?

Last Answer : 5x/36

Work required for compression of a gas contained in a cylinder is 7000 kJ. During compression, heat interaction of 3000 kJ causes the surroundings to be heated. Internal energy change of the gas during the compression is __________ kJ. (A) +4000 (B) -4000 (C) 10000 (D) -10000

Description : Work required for compression of a gas contained in a cylinder is 7000 kJ. During compression, heat interaction of 3000 kJ causes the surroundings to be heated. Internal energy change of the gas during the compression is __________ kJ. (A) +4000 (B) -4000 (C) 10000 (D) -10000

Last Answer : (A) +4000

The combined mass of car and passengers travelling at 72 km/hr is 1500 kg. Find the kinetic energy of this combined mass. (Formula: K =mv2 / 2k )  a. 300 kJ  b. 200 kJ  c. 500 kJ  d. None of the above

Description : The combined mass of car and passengers travelling at 72 km/hr is 1500 kg. Find the kinetic energy of this combined mass. (Formula: K =mv2 / 2k )  a. 300 kJ  b. 200 kJ  c. 500 kJ  d. None of the above

Last Answer : 300 kJ

The flow energy of 150 L of a fluid passing a boundary to a system is 110 kJ. Determine the pressure at this point  a. 733.33 kPa  b. 833.33 kPa  c. 933.33 kPa  d. 633.33 kPa

Description : The flow energy of 150 L of a fluid passing a boundary to a system is 110 kJ. Determine the pressure at this point  a. 733.33 kPa  b. 833.33 kPa  c. 933.33 kPa  d. 633.33 kPa

Last Answer : 733.33 kPa

What is the unit of the total energy of the system?  A. Kj  B. Kj/Kg  C. Kg  D. g

Description : What is the unit of the total energy of the system?  A. Kj  B. Kj/Kg  C. Kg  D. g

Last Answer : Kj

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Description : A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Last Answer : 1378.7 kJ

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

The enthalpy of formation of ammonia is `-46.0 KJ mol^(-1)` . The enthalpy change for the reaction `2NH_(3)(g)rarr N_(2)(g)+3H_(2)(g)` is :

Description : The enthalpy of formation of ammonia is `-46.0 KJ mol^(-1)` . The enthalpy change for the reaction `2NH_(3)(g)rarr N_(2)(g)+3H_(2)(g)` is :

Last Answer : The enthalpy of formation of ammonia is `-46.0 KJ mol^(-1)` . The enthalpy change for the reaction `2NH_(3)(g) ... mol^(-1)` D. `-92.0 KJ mol^(-1)`

The value of `Delta_(0) " for " [Ti(H_(2)O)_(6)]^(3+)` is found to be 240 kJ `mol^(-1)` then predict the colour of the complex using the following tab

Description : The value of `Delta_(0) " for " [Ti(H_(2)O)_(6)]^(3+)` is found to be 240 kJ `mol^(-1)` then predict the colour of the complex using the following tab

Last Answer : The value of `Delta_(0) " for " [Ti(H_(2)O)_(6)]^(3+)` is found to be 240 kJ `mol^(-1)` then ... -34)J-sec,N_(A)=6xx10^(23)c=3xx10^(8) m//sec)`

What is the value for G at 5000 k if H-220 KJmol and S-0.05 KJ (molK)?

Description : What is the value for G at 5000 k if H-220 KJmol and S-0.05 KJ (molK)?

Last Answer : 30 kj

What is the value for G at 5000 k if H-220 KJmol and S-0.05 KJ (molK)?

Description : What is the value for G at 5000 k if H-220 KJmol and S-0.05 KJ (molK)?

Last Answer : 30 kj

At which temperature would a reaction with AH = -92 kJ/mol, AS = -0.199kJ/(mol·K) be spontaneous?

Description : At which temperature would a reaction with AH = -92 kJ/mol, AS = -0.199kJ/(mol·K) be spontaneous?

Last Answer : the answer is 400

An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Description : An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Last Answer : Ans :b

If the specific heats of a gas and a vapor are 0.2KJ/Kg.°K and 1.5 KJ/Kg.°K respectively, and the humidity is 0.01; the humid heat in KJ/°Kg. is (A) 0.31 (B) 0.107 (C) 0.017 (D) 0.215

Description : If the specific heats of a gas and a vapor are 0.2KJ/Kg.°K and 1.5 KJ/Kg.°K respectively, and the humidity is 0.01; the humid heat in KJ/°Kg. is (A) 0.31 (B) 0.107 (C) 0.017 (D) 0.215

Last Answer : (D) 0.215

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 kJ/kg. K) The exit condition of steam is (A) Superheated vapour (B) Partially condensed vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Description : Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 ... vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Last Answer : (A) Superheated vapour

Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Description : Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Last Answer : 97.6%,2713 kJ/kg

In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg

Description : In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg 

Last Answer : Constant pressure process Final condition of steam is dry saturated Enthalpy of dry steam = hg= hf + hfg =2776.2 KJ/Kg .Given Latent heat of vaporization = hfg = hg - hf =2776.2-762.6 =2013.6 KJ/Kg Initial condition ... hfg = 762.6+0.8 X 2013.6 =2373.48 KJ/Kg Heat added = hg-hw = 402.72 KJ/kg

How to cool down boiled eggs without wasting any, or much water?

Description : How to cool down boiled eggs without wasting any, or much water?

Last Answer : A bowl of cold water, or with ice…

Is using boiled water in neti pot that's only boiled for 30 seconds safe?

Description : Is using boiled water in neti pot that's only boiled for 30 seconds safe?

Last Answer : I’m sure you are fine @tan253. The water in Australia and New Zealand is clean and safe. We drink it from the tap. In future, perhaps boil the water in a pan, but I really don’t think you need to worry.

What happens to water when boiled in a vacuum?

Description : What happens to water when boiled in a vacuum?

Last Answer : It will boil at -67°.

Is it safe to use a stainless steel pot if I boiled water until it was dry and left it on the burner for a while?

Description : Is it safe to use a stainless steel pot if I boiled water until it was dry and left it on the burner for a while?

Last Answer : It should be fine. If your roommate is really that worried, though, put one cup of water and one cup of vinegar into the pot, boil the mixture for about 15 minutes, then wash the pot thoroughly ... quite unnecessary if there isn't any residue, but it will get rid of anything you may have overlooked.

I boiled pasta in tap water that is very dirty, should I eat it?

Description : I boiled pasta in tap water that is very dirty, should I eat it?

Last Answer : I wouldn’t.

Is it bad to drink boiled water mixed with normal cold tap water?

Description : Is it bad to drink boiled water mixed with normal cold tap water?

Last Answer : If the non-boiled water is safe to drink then you’ll be fine.

Are you from one of these cities listed? If so, don't drink your tap water - even boiled.

Description : Are you from one of these cities listed? If so, don't drink your tap water - even boiled.

Last Answer : What is this ‘water’ of which you speak? eyes beer I lived in Florida for about five years. Horrible water from the tap. It’s sad to have to buy water in a bottle, yet the alternative in FL was sulfur-water. Ick.

Why does my electric kettle turn itself off before the water is boiled?

Description : Why does my electric kettle turn itself off before the water is boiled?

Last Answer : if it works via heat sensor, then maybe the sensor is broken. if it works via a fixed time, then maybe it does not heat fast enough. if it has some sort of bimetal timer, then it might be maladjusted.

unpeeled carrots boiled water turn to turquoise,why?

Description : unpeeled carrots boiled water turn to turquoise,why?

Last Answer : Hope you scrubbed & washed the carrots before cooking. I would have my water tested. Home Depot was doing some free water testing.

While exploring the wilds of Canada, George was captured by hostile wood fairies. Zion, the powerful chief of the fairies told him he could make one final statement which would determine how he would die. If the statement he made was false, he would be boiled in water. If the statement were true, he would be fried in oil. George found neither of this options too his liking, so he made a statement that got him out of this seemingly impossible situation. What is the one statement he could have made? -Riddles

Description : While exploring the wilds of Canada, George was captured by hostile wood fairies. Zion, the powerful chief of the fairies told him he could make one final statement which would determine how he ... out of this seemingly impossible situation. What is the one statement he could have made? -Riddles

Last Answer : George said: 'You will boil me in water.' The fairies were faced with a dilemma. If they boil him in water, that would make his statement true, which means he should have been fried in oil. ... statement false. The fairies had no way our of their situation so they were forced to set George free.

While exploring the wilds of Canada, Wild Man Dave was captured by hostile wood fairies. Brad, the powerful chief of the fairies told him he could make one final statement which would determine how he would die. If the statement he made was false, he would be boiled in water. If the statement were true, he would be fried in oil. Wild Man Dave found neither of this options too his liking, so he made a statement that got him out of this seemingly impossible situation. What is the one statement he could have made? -Riddles

Description : While exploring the wilds of Canada, Wild Man Dave was captured by hostile wood fairies. Brad, the powerful chief of the fairies told him he could make one final statement which would determine ... out of this seemingly impossible situation. What is the one statement he could have made? -Riddles

Last Answer : Wild Man Dave said: 'You will boil me in water.' The fairies were faced with a dilemma. If they boil him in water, that would make his statement true, which means he should have been fried in oil ... false. The fairies had no way our of their situation so they were forced to set Wild Man Dave free.