concrete injection leveling?

concrete injection leveling?
by

1 Answer

Answer :

form_title=concrete injection leveling form_header=7633 How would you best describe the concrete damage?*= [] Heaving [] Settling [] Cracking "Are there any special applications, or finishes, on the concrete that is being repaired?"*= [] "Special color, stain, or other additive [] Lightweight concrete [] Exposed aggregate finish [] Smooth trowel finish [] Brush textured finish (slip-resistant) [] Salt finished" Please identify the location of the concrete leveling project.*= [] Finish floor in a living space [] Subflooring in a living space [] Garage or basement floor [] Driveway/parking area [] Exterior walkway/patio [] Pad for a light structure [] Steps
by

Related questions

Question about leveling up in Mafia Wars?

Description : Question about leveling up in Mafia Wars?

Last Answer : I think you need to get off facebook. IMO.

Is the American system of leveling fines against someone basically unfair, because it doesn't "hurt" the wealthy?

Description : Is the American system of leveling fines against someone basically unfair, because it doesn't "hurt" the wealthy?

Last Answer : justice is blind….

A leveling diet?

Description : How do I eat to at least keep myself level?

Last Answer : Don't overdo your eyes and move something minimal.

What is the best solution for leveling a gate entrance?

Description : The level is not long enough. Hose spirit level, laser or something else would be good? Does anyone have experience with it?

Last Answer : I think a spirit level would be enough, possibly attached to a straight long slat or plank.

Repair of bad leveling trowel with glue?

Description : Hello, can large unevennesses caused by cracking and peeling part of the leveling trowel under the PVC FAtra floor can be repaired with a larger layer of glue? The floor designer suggests this method, ... days, the inequalities began to emerge, sinking into the holes. Thank you for your feedback.

Last Answer : I don't think glue will make up for it exactly. However, it also depends on the size and depth of the holes. It would be best to remove the trowel, clean the base surface and give a sufficient layer of a new self-leveling machine.

Which paints are self leveling for refinishing a bathtub?

Description : Which paints are self leveling for refinishing a bathtub?

Last Answer : One great product from Homax is their Tub & Tile One Part Expoxy Paint. This paint is self leveling with a no streak finish.

How easily does the ReadyLift leveling kit fit in place?

Description : How easily does the ReadyLift leveling kit fit in place?

Last Answer : The ReadyLift leveling kits is very quick and easy to install.

You are the project manager working on a research project for a new drug treatment. Your preliminary project schedule runs past the due date for a federal grant application. The manager of the R&D department has agreed to release two resources to work on your project in order to meet the federal grant application date. This is an example of _______________. A. Crashing B. fast tracking C. resource leveling D. adjusting the resource calendar

Description : You are the project manager working on a research project for a new drug treatment. Your preliminary project schedule runs past the due date for a federal grant application. The manager of the R&D ... .  A. Crashing B. fast tracking C. resource leveling D. adjusting the resource calendar

Last Answer : A. Crashing

)Resource leveling attempts to : 1. Reduce resource requirements by smoothing out period-to period resource assignments. 2. Ensure that the 3. Reduce the amount of resources so that they can be shared with on other endeavors. 4. Increase the amount of the project manager's authority so that budget dollars can be appropriated.budget abnormalities are overcome.

Description : )Resource leveling attempts to : 1. Reduce resource requirements by smoothing out period-to period resource assignments.  2. Ensure that the budget abnormalities are overcome. 3. Reduce the ... Increase the amount of the project manager's authority so that budget dollars can be  appropriated.

Last Answer : 1. Reduce resource requirements by smoothing out period-to period resource assignments.

The strategy used to correct resource over-allocations by balancing demand for resources and the available supply is known as (A) resource assignment (B) resource leveling (C) resource splitting (D) resource scheduling

Description : The strategy used to correct resource over-allocations by balancing demand for resources and  the available supply is known as (A) resource assignment (B) resource leveling (C) resource splitting (D) resource scheduling

Last Answer : (B) resource leveling

tractor is a vehicle that runs on continuous tracks instead of wheels. In agriculture they are used for land clearing and land leveling works. a. Row crop b. Walking d. None of the above

Description : tractor is a vehicle that runs on continuous tracks instead of wheels. In agriculture they are used for land clearing and land leveling works. a. Row crop b. Walking d. None of the above

Last Answer : <!-- [if !supportLists] -->a.                <!-- [endif] -->Ans- c. crawler

Land plane is ideally suited for: a. Land leveling b. Earth moving c. Final grading d. Top finishing

Description : Land plane is ideally suited for: a. Land leveling b. Earth moving c. Final grading d. Top finishing

Last Answer : d. Top finishing

In setting up a plane table at any station (a) Leveling is done first (b) Centering is done first (c) Both leveling and centering are done simultaneously * (d) Orientation is done first

Description : In setting up a plane table at any station (a) Leveling is done first (b) Centering is done first (c) Both leveling and centering are done simultaneously * (d) Orientation is done first

Last Answer : c) Both leveling and centering are done simultaneously *

Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Description : Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Last Answer : (c) Many readings are to be taken from a single setting of the instrument*

Conventional method of camber recording a) Piano wire with counter weight* b) By using leveling instrument c) Offset method d) None of the above

Description : Conventional method of camber recording a) Piano wire with counter weight* b) By using leveling instrument c) Offset method d) None of the above

Last Answer : a) Piano wire with counter weight*

Mention the procedure of fly leveling and state the purpose of doing it.

Description : Mention the procedure of fly leveling and state the purpose of doing it.

Last Answer : Procedure: 1. Set up the level at a point from where BM is visible and perform temporary adjustments. 2. Position of the level should be approximately midway between the BS and FS stations. 3. ... accuracy of survey. 3. To connect the B.M at any intermediate point of the alignment.

Define fly leveling and profile leveling

Description : Define fly leveling and profile leveling

Last Answer : Fly Leveling adopted to transfer bench marks from one place to other .In this leveling only FS & BS are taken.  Profile leveling:- The operation in which the object is to determine the ... known distanced apart along a given line to obtained the accurate outline of the surface of the ground 

Write errors in leveling and corresponding precaution

Description : Write errors in leveling and corresponding precaution

Last Answer : i) Instrument error with respect to bubble tube, leveling staff. 1.If bubble tube is sluggish it may apparently be in the center though the bubble line is not horizontal. Precaution - ... reading. Precaution- Leveling should be properly done by bringing the bubble of bubble tube at Centre.

State the purposes of following methods of leveling. i)Profile leveling, ii)Fly leveling, iii)Check leveling iv)Reciprocal leveling

Description : State the purposes of following methods of leveling. i)Profile leveling, ii)Fly leveling, iii)Check leveling iv)Reciprocal leveling

Last Answer : 1. Profile leveling- To determine the undulation of ground surface along given line for alignment of road, canal or pipe, railway line 2. Fly leveling-It is used to for connecting B.M. to ... is used to find the difference in leveling between two points two point obstructed due to river or pond.

Define Change point and its necessity in leveling.

Description : Define Change point and its necessity in leveling.

Last Answer : Change point : It is the point at which both backsight and foresight readings are taken before and after shifting the level instrument. Necessity of change point in leveling : It is ... observations from single station due to large area, abrupt ground level variation and unavoidable obstruction. 

What is meant by profile leveling and cross-sectioning ?

Description : What is meant by profile leveling and cross-sectioning ?

Last Answer : profile leveling : To know the nature of the ground surface the profile leveling is done along the Centre of the road at some regular intervals if required, staff readings may also be taken at points ... surface transverse to the Centre of the road. The length depend upon the nature of the work.

State the important point to be remembered while doing profile leveling.

Description : State the important point to be remembered while doing profile leveling.

Last Answer : 1. The chainage of staff stations are continuous from beginning to the end of the section line. 2. Readings of B.S. and F.S. should be taken very accurately with the bubble exactly in ... their width or by offset. 5)All the temporary adjustments at all instrument position shall carefully be done. 

State different types of leveling. Explain any one in brief.

Description : State different types of leveling. Explain any one in brief.

Last Answer : Types of Levelling  1. Simple Levelling.  2. Differential Levelling.  3. Fly Levelling.  4. Longitudinal or profile leveling.  5. Cross-Section Levelling.  6. Check Levelling.  1. ... B are taken. The difference of these readings gives the difference of level between A and B. 

Explain the procedure for profile leveling with neat sketch.

Description : Explain the procedure for profile leveling with neat sketch. 

Last Answer : 1) Let PQR be the given line of section.   2) Mark point at 10 m intervals on this line. 3) Level is set up on a firm ground at a suitable point I1. 4) Temporary adjustment of level is done and B. ... and set up on firm ground at I2 as before. 10) B.S is taken on CP1 and new HI is calculated  

State sources of error in leveling.

Description : State sources of error in leveling. 

Last Answer : There are three sources of Error a) Instrumental Error :- Imperfect permanent adjustment Sluggish bubble Faulty focusing tube The erroneous leveling staff b) Refraction Error ( error due ... in manipulation  Mistake in reading the rod   Errors in sighting   Mistakes in recording

Describe instrumental errors in leveling.

Description : Describe instrumental errors in leveling.

Last Answer : The leveling process requires two instruments namely level and staff. The instrumental errors related to these are1. Error due to imperfect permanent adjustment: When the instrument is not in perfect ... the leveling staff may not be perfect. These errors can be neglected for ordinary work.

Explain the procedure of profile leveling for construction of road.

Description : Explain the procedure of profile leveling for construction of road.

Last Answer : The operation of taking levels along the center line of any alignment at regular interval is called longitudinal or profile leveling. Along the alignment, spots are marked at regular interval along ... points are plotted against their chainage to obtain ground profile along the alignment.

State under what situations differential leveling and reciprocal leveling is adopted.

Description : State under what situations differential leveling and reciprocal leveling is adopted.

Last Answer : 1. Differential leveling is adopted when i. The points are at a great distance apart. ii. The difference of elevation between the points is large. iii. There is obstacle between the points. ... or valley as it is not possible to place the level midway between two points on opposite banks.

Explain importance of Bench mark in leveling and state the types of Bench mark.

Description : Explain importance of Bench mark in leveling and state the types of Bench mark. 

Last Answer : Bench marks are fixed points or marks of known RL determined with reference to the datum line. These are very important points which serve as reference points for finding RLs of new points or for conducting ... 2. Permanent bench mark. 3. Arbitrary bench mark. 4. Temporary bench mark.

Define leveling.

Description : Define leveling.

Last Answer : Levelling is an ‘art of determining relative heights or elevations of different points on the earth’s surface so that the same may be represented on a plan or map’. It is essentially a process dealing with the measurements in vertical plane.

Stood on rusty thumb tack - would you get a tetanus injection?

Description : Stood on rusty thumb tack - would you get a tetanus injection?

Last Answer : If it has been more than 4–5 years since you had a tetanus shot, then – yes, you should. Why take the risk of tetanus?

What are the symptoms of a failed fuel pressure regulator on a 1988 Mercury Cougar with a 3.8L MPI (multi port injection) V6 engine?

Description : What are the symptoms of a failed fuel pressure regulator on a 1988 Mercury Cougar with a 3.8L MPI (multi port injection) V6 engine?

Last Answer : Okay I’m shooting from the hip; car runs rough, stalls when coming to a stop, tailpipe is blackened and dark smoke comes out, oil smells like gasoline and gas mileage has dropped.

I just got an injection from a back up nurse is it OK for me to flirt with her?

Description : I just got an injection from a back up nurse is it OK for me to flirt with her?

Last Answer : No. Not unless she shows some interest. If she isn’t interested you’ll just come off looking like a cad.

If putting animals to sleep is painless, why is the lethal injection in humans painful?

Description : If putting animals to sleep is painless, why is the lethal injection in humans painful?

Last Answer : I’ve wondered that exact same thing. Maybe it has to do with the amount of drugs needed? I did read that some of the drugs used in the best cocktail for lethal injection are less available now.

Can organs from people who had lethal injection be used?

Description : Can organs from people who had lethal injection be used?

Last Answer : answer:My understanding is that lethal injection kills because it suppresses breathing and stops the heart from beating. I don't think it causes any organ damage at all. This is something I've wondered ... too violent in the public eye. Lethal injection looks more peaceful but it's really not.

How do I avoid having to take my Abilify injection this morning?

Description : How do I avoid having to take my Abilify injection this morning?

Last Answer : I might also add that for years my depression has been so bad that I am now in an assisted living program. My doc told me that if I fail to comply that I may lose my housing…

Anyone using the drug Orencia by self injection?

Description : Anyone using the drug Orencia by self injection?

Last Answer : I’ve never tried.

Rapid low cost short life injection or blow mold tooling?

Description : Rapid low cost short life injection or blow mold tooling?

Last Answer : Could you be a little clearer on what you need? Are you making parts for the cabinets? How will they change? What size objects do you want to make with the injection molding equipment? I always seem to need clarification. :-(

Is it okay to remove the band-aid where an injection was made?

Description : Is it okay to remove the band-aid where an injection was made?

Last Answer : The bandaid is only there to absorb any blood that might result from the puncture. No problem.

Where else on my body can I give myself an injection?

Description : Where else on my body can I give myself an injection?

Last Answer : Yes… your thigh will do. Pinch it up and give it a jab.

Has anyone had a nerve block injection?

Description : Has anyone had a nerve block injection?

Last Answer : no. Only in the last moments before childbirth. Then, the block was definately not in my head, and not for headaches.

Repeat DUI's resulting in eventual manslaughter. What to do with someone like this- jail, prison, rehab... lethal injection?

Description : Repeat DUI's resulting in eventual manslaughter. What to do with someone like this- jail, prison, rehab... lethal injection?

Last Answer : jail combined with rehab and psychological treatment.

Which of the following process is suitable for making injection molding tools? a.SL b.SLS c.EBM d.FDM

Description : Which of the following process is suitable for making injection molding tools? a.SL b.SLS c.EBM d.FDM

Last Answer : b.SLS

Which one of the following is not a direct rapid tooling method? a.LOM Composite b.Direct AIM (ACES Injection Molding) c.Sand Molding d.Injection molding

Description : Which one of the following is not a direct rapid tooling method? a.LOM Composite b.Direct AIM (ACES Injection Molding) c.Sand Molding d.Injection molding

Last Answer : d.Injection molding

Which one of the following is not a rapid indirect tooling method? a.Vacuum Casting b.Investment Casting c.Laser-Engineered Net Shaping d.Injection molding

Description : Which one of the following is not a rapid indirect tooling method? a.Vacuum Casting b.Investment Casting c.Laser-Engineered Net Shaping d.Injection molding

Last Answer : c.Laser-Engineered Net Shaping

Which of the following is not an example of additive manufacturing? a.Fused-deposition-modeling b.Electron beam machining c.SLS d.Injection molding

Description : Which of the following is not an example of additive manufacturing? a.Fused-deposition-modeling b.Electron beam machining c.SLS d.Injection molding

Last Answer : d.Injection molding

Which of the following process is not formative process? a.Bending b.Plastic injection molding c.Selective Laser Sintering d.Forging

Description : Which of the following process is not formative process? a.Bending b.Plastic injection molding c.Selective Laser Sintering d.Forging

Last Answer : c.Selective Laser Sintering

Suggest a good Knee Injection Treatment in Melbourne?

Description : Suggest a good Knee Injection Treatment in Melbourne?

Last Answer : Dr PJ Singh is a specialist knee orthopedic surgeon, providing injections treatment (Duralane) for patients with early knee Arthritis to help with pain management.(03) 9428 4128

A device mounted on the injection pump which is use to lift fuel from the tank to the injection system?

Description : A device mounted on the injection pump which is use to lift fuel from the tank to the injection system?

Last Answer : Electric fuel pumps

What happens if a tetanus injection is given to a nail ? Or take a full dose. ?

Description : What happens if a tetanus injection is given to a nail ? Or take a full dose. ?

Last Answer : Full dose should be taken