Regenerative method of braking is based on that?

by

1 Answer

Answer :

Regenerative method of braking is based on that back e.m.f. is equal to the applied voltage.

by

Related questions

Which method of braking is generally used in elevators ?

Last Answer : Plugging method of braking is generally used in elevators.

For which types of D.C. motor, dynamic braking is generally used ?

Last Answer : Shunt motors,  Series motors, Compound motors

During rheostat braking of D.C. series motors?

Last Answer : During rheostat braking of D.C. series motors motor is run as a generator.

For using regenerative breaking, the most suitable motor is :

Description : For using regenerative breaking, the most suitable motor is :  (A) DC series motor  (B) Slip ring induction motor  (C) Squirrel cage induction motor  (D) Synchronous motor

Last Answer : For using regenerative breaking, the most suitable motor is : Slip ring induction motor

Explain in brief how anti-lock braking system works

Description : Explain in brief how anti-lock braking system works

Last Answer : An ABS is a system on motor vehicles which prevents the wheels from locking while braking stopping safely is one of the most important functions a motor vehicle can perform. Diagram: ... to decrease the pressure on the braking circuit, effectively reducing the braking force on that wheel.

The braking retardation is usually in the range?

Last Answer : The braking retardation is usually in the range 10 to 15 km phps.

The main disadvantage of the Ward-Leonard control method is?

Last Answer : The main disadvantage of the Ward-Leonard control method is high initial cost, high maintenance cost, low efficiency at light loads.

For constant torque drive which speed control method is preferred ?

Last Answer : For constant torque drive armature voltage control speed control method is preferred.

How to Choose a Birth Control Method

Description : How to Choose a Birth Control Method

Last Answer : How to Choose a Birth Control Method Birth control methods depend on the couple's needs and commitment to the method. Some couples just need to prevent pregnancy while others wish to avoid sexually- ... unplanned sex, a broken condom or failure to take birth control pills two days in a row.

How to Use the Rhythm Method

Description : How to Use the Rhythm Method

Last Answer : How to Use the Rhythm Method The rhythm method is one of the many natural ways of birth control. This technique is based on the length of your menstrual cycle. Here are some tips you can ... their phases. There are numerous natural birth control techniques. Use the one the best suits your needs.

Explain the thermal triggering method of SCR. Enlist different triggering methods of SCR.

Description : Explain the thermal triggering method of SCR. Enlist different triggering methods of SCR.

Last Answer : Types of Triggering: 1) Forward voltage triggering 2) Thermal triggering (Temperature triggering) 3) Radiation triggering (Light triggering) 4) dv/dt triggering 5) Gate triggering ... generated leakage current increases. This current gets multiplied internally and thyristor is turned on. 

Illustrate with neat wiring diagram a single lamp control by two point method.

Description : Illustrate with neat wiring diagram a single lamp control by two point method.

Last Answer : Single lamp control by two point method:  This system is commonly used for stair case wiring. It consists of two way switches (the switch operates always in one of the two possible positions) the ... the person will change the position of switch S2, so that the lamp will be switched OFF'.

A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Describe fire extinguishing method.

Description : Describe fire extinguishing method.

Last Answer : (i) Carbon Dioxide Extinguishing Systems  This type is the most suitable & widely recommended one for electrical fires. Carbon dioxide (CO2) extinguishers are normally Class C ... particles to expand chemically inhibiting combustion and expelling the oxygen thereby smothering the flames.

Draw and explain bulk correction method for power factor & control.

Description : Draw and explain bulk correction method for power factor & control.

Last Answer : Bulk correction method for power factor & control: i) Here individual starter controls the capacitors located at distribution panel. ii) Centralized compensation is employed in large industrial plants where many ... capacitor units in steps to maintain P.F. more than preset limit (0.95). 

Explain energy conservation method in lighting system by using installation of separate transformer / servo stabilizer.

Description : Explain energy conservation method in lighting system by using installation of separate transformer / servo stabilizer.

Last Answer : Energy conservation techniques by installation of separate transformer / servo stabilizer: The luminous efficiency of lamps depends upon the voltage applied across the terminals. It gives its best ... the voltage constant in that installation for giving best luminous efficiency of lamps.

Merits of two wattmeter method

Description : Merits of two wattmeter method

Last Answer : Advantages of Two Wattmeter Method for 3-Phase Power Measurement: 1) It is used for balanced as well as unbalanced load. 2) For the star type load, it is not necessary to ... reactive volt-amperes for balanced loads also. 7) The circuit connections are independent of load connection.

Write one advantage and one disadvantage each for spring control method and gravity control method.

Description : Write one advantage and one disadvantage each for spring control method and gravity control method.

Last Answer : Advantages of Spring Control Method: 1) The spring-controlled meters may be used in any position. 2) In some instruments, springs can be used as current leads. 3) As springs are light in weight ... only. 2) Scale is non-uniform. 3) Control weights add to the weight of instrument.

State any two disadvantages of one wattmeter method of measurement of 3 phase power.

Description : State any two disadvantages of one wattmeter method of measurement of 3 phase power.

Last Answer : State any two disadvantages of one wattmeter method of measurement of 3 phase power. Disadvantages of one wattmeter method:- 1. Only used for balanced load 2. It can not be used for ... connection then neutral point must be available 4. Delta connection must be opened to connect current coil.

With neat diagram explain calibration of energy meter by direct loading method.

Description : With neat diagram explain calibration of energy meter by direct loading method.

Last Answer : Calibration of Energy Meter by Direct Loading Method:  There are three methods for testing/calibration:  1. Long period dial test  2. Using rotary sub- standard meter  3. Using precision grade instruments  All ... of substandard meter in kWh  Then % error = [(D - DS)/DS] x 100

Explain V- I method of measurement of medium resistance.

Description : Explain V- I method of measurement of medium resistance. 

Last Answer : In this method, use suitable source, ammeter and voltmeter and connect them as shown in the above diagram. Take reading of voltmeter and ammeter, then value of resistance = R = V/I Ω To minimise the error take 4 to 5 observation for the same resistance and take their average.

Explain spring control method with neat diagram.

Description : Explain spring control method with neat diagram.

Last Answer : Spring Control Method: As shown in the figure the inner ends of the both springs are attahced to the spindle ,while outer end of upper spring is attached to the lever and outer end of ... the springs are twisted in opposite direction to the motion of pointer and produce controlling torque.

List one advantage and one disadvantage of one wattmeter method.

Description : List one advantage and one disadvantage of one wattmeter method. 

Last Answer : Advantages:  1) Only one wattmeter is used.  2) Less number of connections.  3) Cost required is less.  Disadvantages:  1) Used only for 3- Φ balanced load and not for ... be accessible for connecting the Pressure coil.  3) Delta connection must be opened to connect current coil. 

List any four errors in induction type energy meter. Give method of compensation for each.

Description : List any four errors in induction type energy meter. Give method of compensation for each.

Last Answer : Errors in Induction Type Energy Meter with their Compensation:  1) Error due to friction: This error can be compensated by the additional shading band provided on the shunt electromagnet.  2) Phase ... error: This error can be compensated by providing a flux diverter' to the current magnet. 

The self GMD method is used to evaluate

Description : The self GMD method is used to evaluate

Last Answer : The self GMD method is used to evaluate inductance and capacitance

The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are

Description : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is (A) zero (B) 0.5 (C) between zero and 0.5 (D) between 0.5 and unity

Last Answer : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is between 0.5 and unity

Compared to Gauss-Seidel method, Newton- Raphson method takes :

Description : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration C, more number of iterations and more time per iteration D. more number of iterations and less time per iteration

Last Answer : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration ... of iterations and more time per iteration D. more number of iterations and less time per iteration

The bridge method commonly used for finding mutual inductance is

Description : The bridge method commonly used for finding mutual inductance is (A) Heaviside Campbell bridge (B) Schering bridge (C) De Sauty bridge (D) Wien bridge

Last Answer : The bridge method commonly used for finding mutual inductance is Heaviside Campbell bridge

method can bring the locomotive to dead stop.

Last Answer : Plugging braking method can bring the locomotive to dead stop.

Speed control by Ward Leonard method gives uniform speed variation?

Last Answer : Speed control by Ward Leonard method gives uniform speed variation in both directions.

Annual depreciation as per straight line method, is calculated by?

Last Answer : Annual depreciation as per straight line method, is calculated by the capital cost minus the salvage value, is divided by the number of years of life.

The progressive operation of the contactors marked 'A' provide the winch shown in the illustration with __________. EL-0102 A. accumulation B. dynamic braking C. acceleration D. regenerative braking

Description : The progressive operation of the contactors marked 'A' provide the winch shown in the illustration with __________. EL-0102 A. accumulation B. dynamic braking C. acceleration D. regenerative braking

Last Answer : Answer: C

A motor using a rheostat in the motor circuit to vary the speed is called a ____________. A. squirrel-cage induction motor B. regenerative braking motor C. wound-rotor induction motor D. synchronous motor

Description : A motor using a rheostat in the motor circuit to vary the speed is called a ____________. A. squirrel-cage induction motor B. regenerative braking motor C. wound-rotor induction motor D. synchronous motor

Last Answer : Answer: C

What Is Meant By Regenerative Braking?

Description : What Is Meant By Regenerative Braking?

Last Answer : When the supply is cutt off for a running motor, it still continue running due to inertia. In order to stop it quickly we place a load(resitor) across the armature winding and the motor should ... and due to load the motor stops quickly.This type of breaking is called as Regenerative Breaking .

What is meant by regenerative braking?

Description : What is meant by regenerative braking?

Last Answer : When the supply is cut off for a running motor, it still continue running due to inertia. In order to stop it quickly we place a load (resistor) across the armature winding and the motor should ... and due to load the motor stops quickly. This type of breaking is called as Regenerative Breaking .

_____ technology helps to stop a combustion engine when the vehicle pulls to a stop and restart it when driver accelerates. • Start stop technology • Passive braking technology • Regenerative braking technology • Internal cooling technology

Description : _____ technology helps to stop a combustion engine when the vehicle pulls to a stop and restart it when driver accelerates. • Start stop technology • Passive braking technology • Regenerative braking technology • Internal cooling technology

Last Answer : • Regenerative braking technology

Regenerative braking involves : a) Nano fibers that repair the surface of brake pads b) Reducing the amount of friction c) Reclaiming heat from the brake and using it for power d) All of the above

Description : Regenerative braking involves : a) Nano fibers that repair the surface of brake pads b) Reducing the amount of friction c) Reclaiming heat from the brake and using it for power d) All of the above

Last Answer : c) Reclaiming heat from the brake and using it for power

Regenerative braking (A) Can be used for stopping a motor. (B) Cannot be easily applied to DC series motors. (C) Can be easily applied to DC shunt motors (D) Cannot be used when motor load has overhauling characteristics.

Description : Regenerative braking (A) Can be used for stopping a motor. (B) Cannot be easily applied to DC series motors. (C) Can be easily applied to DC shunt motors (D) Cannot be used when motor load has overhauling characteristics.

Last Answer : Ans: B Because reversal of Ia would also mean reversal of field and hence of Eb

Explain regenerative braking for D.C. series motor.

Description : Explain regenerative braking for D.C. series motor.

Last Answer : Schematic diagram of regenerative braking of D.C. series :-  Explanation of regenerative braking: During normal running, motors are connected in parallel with field winding in series ... For final stop mechanical braking is applied. External Resistances are connected to limit the current.

In a regenerative braking, which of the following is generally true?

Description : In a regenerative braking, which of the following is generally true?  (a) Back e.m.f. in the motor exceeds the applied voltage (b) Back e.m.f. is less than the applied voltage ... dissipated in a resistance (d) Kinetic energy of the motor is dissipated through free wheeling diode across the motor 

Last Answer : In a regenerative braking, which of the following is generally true?  (a) Back e.m.f. in the motor exceeds the applied voltage (b) Back e.m.f. is less than the applied voltage ... in a resistance (d) Kinetic energy of the motor is dissipated through free wheeling diode across the motor 

A DC chopper is used for regenerative braking of a separately excited DC motor. The DC supply

Description : A DC chopper is used for regenerative braking of a separately excited DC motor. The DC supply voltage is 400V. The armature current during regenerative braking is kept constant at 300 A with negligible ripple. For a duty cycle of 60% ... to the DC supply is  (a) 78 kW (b) 58 kW (c) 38 kW (d) 48 kW

Last Answer : 48

Regenerative braking can:

Description : Regenerative braking can: (A) be used for stopping a motor (B) not be easily applied to DC series motors (C) be easily applied to DC shunt motors (D) not be used for heavy duty -cycle motors

Last Answer : Regenerative braking can: not be easily applied to DC series motors

Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (A) Regenerative

What is the full form of AS/RS in FMS? a.Automated storage and recovery system b.Automatic storage and rotary system c.Automated storage and retrieval system d.Automated storage and regenerative system

Description : What is the full form of AS/RS in FMS? a.Automated storage and recovery system b.Automatic storage and rotary system c.Automated storage and retrieval system d.Automated storage and regenerative system

Last Answer : c.Automated storage and retrieval system

Which one of the following cell I totipotent and responsible for regenerative capacity in sponges ?

Description : Which one of the following cell I totipotent and responsible for regenerative capacity in sponges ?

Last Answer : Which one of the following cell I totipotent and responsible for regenerative capacity in sponges ? ... B. Thesocytes C. Archaeocytes D. Scleroblast

Assertion : Epithelia are highly regenerative. Reason : When epithelia gets damaged they regenerate more repidly then other Tissue.

Description : Assertion : Epithelia are highly regenerative. Reason : When epithelia gets damaged they regenerate more repidly then other Tissue.

Last Answer : Assertion : Epithelia are highly regenerative. Reason : When epithelia gets damaged they regenerate more ... . If both Assertion & Reason are false.

Which cells in our body have the least regenerative power? (1) Brain cells (2) Muscle cells (3) Bone cells (4) Liver cells

Description : Which cells in our body have the least regenerative power? (1) Brain cells (2) Muscle cells (3) Bone cells (4) Liver cells

Last Answer : (1) Brain cells Explanation: Brain cells do not regenerate. Once lost, they do not come back. Research from Karolinska Institute in Sweden haves shown that the nerve cells of the brain remain the same throughout a person's life.

Which cells in our body have the least regenerative power? (1) Brain cells (2) Muscle cells (3) Bone cells (4) Liver cells

Description : Which cells in our body have the least regenerative power? (1) Brain cells (2) Muscle cells (3) Bone cells (4) Liver cells

Last Answer : (1) Brain cells Explanation: Brain cells do not regenerate. Once lost, they do not come back. Research from Karolinska Institute in Sweden haves shown that the nerve cells of the brain remain the same throughout a person's life.

A form of regenerative repeater for transmitting signals over a long cable received through a relay in a clearer form. A. Active generator B. Active repeater C. Interpolator D. Audio generator

Description : A form of regenerative repeater for transmitting signals over a long cable received through a relay in a clearer form. A. Active generator B. Active repeater C. Interpolator D. Audio generator

Last Answer : C. Interpolator

Which of the following is a non-regenerative fixed bed catalytic reforming process? (A) Hydroforming (B) Thermofor catalytic reforming (C) Platforming (D) Hyperforming

Description : Which of the following is a non-regenerative fixed bed catalytic reforming process? (A) Hydroforming (B) Thermofor catalytic reforming (C) Platforming (D) Hyperforming

Last Answer : (C) Platforming