1 Answer

Answer :

In the case of lap winding resultant pitch is difference of front and back pitches.

Related questions

Last Answer : Lap winding is composed of any even number of conductors.

Last Answer : In D.C. generators, lap winding is used for low voltage, high current.

Last Answer : In lap winding, the number of brushes is always same as the number of poles.

Description : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively

Last Answer : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively 19,17

Description : State advantages of short pitch winding over full pitch winding in alternators. 

Last Answer : Advantages of Short Pitch Winding over Full Pitch Winding in Alternators: 1) Short pitching reduces the amount of copper needed for end connection when compared with full pitched coil. 2) They ... reduced, thereby increasing the efficiency. 4) The power quality of generated emf is improved. 

Last Answer : In D.C. machines fractional pitch winding is used to reduce the sparking.

Description : Write relation between resultant and equilibrant.

Last Answer : Equilibrant is always equal in magnitude, opposite in direction and collinear to the resultant.

Last Answer : In case of D.C. machine winding, number of commutator segments is equal to number of armature coils.

Last Answer : In case of a flat compounded generator voltage remains constant irrespective of the load.

Last Answer : Wave winding is composed of that even number which is exact multiple of poles + 2.

Last Answer : The resistance of armature winding depends on length of conductor, cross-sectional area of the conductor, number of conductors.

Description : How to Pitch in Softball

Last Answer : How to Pitch in Softball They say that in softball, the pitcher is essential, because he is the one who controls the game's pace and the outcome. This is why it's a good idea to know ... when pitching in softball is very important. With these easy steps, mastering this move will be a cinch.

Description : How to Pitch a Tent

Last Answer : How to Pitch a Tent Pitching a tent well means a world's difference between a peaceful sleep outdoors or your tent being blown over by the smallest gust of wind. Here's how to pitch a tent correctly. ... it back as taut as you can. This will help prevent it from flying off should high winds come.

Description : How to Remove Pine Pitch ?

Last Answer : How to Remove Pine Pitch Pine trees are beautiful and elegant, but if you often go near them, you'll find yourself covered with sap dripping from the tree. This is called pine pitch, and can be ... some all over you, just try these easy techniques and you'll get the gunk off quickly and effectively.

Last Answer : In case of a 4-pole D.C. generator provided with a two layer lap winding with sixteen coils, the pole pitch will be 8.

Description : Where to buy iPad case in Canada?

Last Answer : Amazon.

Description : 13 Cool Ways to Reuse a CD Case

Last Answer : 1. The CD Case Picture Frame Desktop Picture Frame - CD cases, especially the crystal ones, make good desktop picture frames. If your CD case has a clear transparent surface, you can easily view ... world. With just a few modifications, you can turn it into several useful devices. Good luck!

Description : Case interview tips

Last Answer : Case or Situational interview tips Case Interview - A Case Interview shall summarize your skills and evaluate them in hypothetical business scenario in which you shall be required to demonstrate your skills ... a real experience business of the company which you are applying in. So try your best.

Description : Write down the method used for following product : (i) credit card (ii) carrying case (iii) hollow cylinder (iv) knobs

Last Answer : i) Credit Card :- Plastic compounding and molding, Printing, Lamination, Cutting and Embossing. ii) Carrying case:- injection moulding iii) Hollow cylinder:- extrusion iv) Knobs:- compression moulding

Description : Auto reclosing is used in case of

Last Answer : Auto reclosing is used in case of air blast C.B.

Description : In the case of direct current?

Last Answer : In the case of direct current magnitude and direction of current remains constant.

Last Answer : In case of steam engines the steam pressure is 10 to 15 kgf/cm2.

Last Answer : In case of locomotives the tractive power is provided by double cylinder, double acting steam engine.

Last Answer : Depreciation charges are high in case of thermal plant.

Last Answer : It is the wire wound around a aluminium metal it is found commonly in transformers or motors

Description : Damper winding in a synchronous motor

Last Answer : Damper winding in a synchronous motor Serves to start the motor.

Description : A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts applied to the primary. What is the voltage across the secondary?  (A) 30 Volts (B) 480 Volts (C) 120 Volts (D) 60 Volts

Last Answer : A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts applied to the primary. What is the voltage across the secondary?  (A) 30 Volts (B) 480 Volts (C) 120 Volts (D) 60 Volts

Description : A _________ is used to measure the stator % winding temperature of the generator.  (A) Thermocouple (B) Pyrometer (C) Resistance thermometer (D) Thermometer

Last Answer : A Resistance thermometer is used to measure the stator % winding temperature of the generator. 

Description : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is

Last Answer : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

Description : Damper winding is provided in 3 phase synchronous motors to :

Last Answer : Damper winding is provided in 3 phase synchronous motors to : provide starting torque and prevent hunting

Description : Aluminium is not used as winding wire for the armature of a dc machine because  (1) aluminium has low resistivity (2) a large winding space is taken by aluminium conductors and creates ... ) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Last Answer : Aluminium is not used as winding wire for the armature of a dc machine because  (2) a large winding space is taken by aluminium conductors and creates jointing problems (3) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Last Answer : The starting winding of a single-phase motor is placed in stator.

Last Answer : If starting winding of a single-phase induction motor is left in the circuit, it will draw excessive current and overheat.

Last Answer : Starting winding of a single phase motor of a refrigerator is disconnected from the circuit by means of a magnetic relay.

Last Answer : Centrifugal switch disconnects the auxiliary winding of the motor at about 70 to 80 percent of synchronous speed.

Last Answer : The purpose of stator winding in the compensated repulsion motor is to improve power factor and provide better speed regulation.

Last Answer : In split phase motor main winding is of thick wire placed at the bottom of the slots.

Last Answer : In A.C. series motor compensating winding is employed to reduce sparking at the brushes.

Last Answer : In split-phase motor auxiliary winding is of thin wire placed at the top of the slots.

Description : The running winding of a single phase motor on testing with meggar is found to be ground. Most probable location of the ground will be?

Last Answer : The running winding of a single phase motor on testing with meggar is found to be ground. Most probable location of the ground will be at the slot edge where coil enters or comes out of the slot.

Last Answer : A centrifugal switch is used to disconnect starting winding when motor has picked up about 50 to 70 per cent of rated speed.

Last Answer : In a capacitor start motor, the phase displacement between starting and running winding can be nearly 90°.

Last Answer : In a capacitor start and run motors the function of the running capacitor in series with the auxiliary winding is to improve power factor.

Last Answer : In a split phase motor, the running winding should have low resistance and high inductance.

Last Answer : If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will stop.

Last Answer : The short circuit in any winding of the transformer is the result of impulse voltage.

Last Answer : Primary winding of a transformer could either be a low voltage or high voltage winding.

Last Answer :  Sandwich type winding is used in 3 phase shell-type transformer.

Description : The damping winding in synchronous motor is generally used to?

Last Answer : The damping winding in synchronous motor is generally used to provide starting torque and prevent hunting.

Description : In synchronous motor, does the winding losses vary with load?

Last Answer : No, in the synchronous motor the winding losses do not vary with load.