What type of heat transfer does insulation prevent?

What type of heat transfer does insulation prevent?
by

1 Answer

Answer :

Feel Free to Answer
by

Related questions

Ice blocks are covered with sawdust A. To prevent the dust from collecting on the ice B. Because ice being cold cannot be lifted with bare hands C. To provide necessary insulation from heat D. None of the above

Description : Ice blocks are covered with sawdust A. To prevent the dust from collecting on the ice B. Because ice being cold cannot be lifted with bare hands C. To provide necessary insulation from heat D. None of the above

Last Answer : ANSWER: C

The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Description : The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Last Answer : (B) 2K/h0

The critical radius of insulation for cylindrical pipe is (where, hi = heat transfer coefficient at inside of the pipe) (A) K/h0 (B) 2K/h0 (C) hi /K (D) 2hi /K

Description : The critical radius of insulation for cylindrical pipe is (where, hi = heat transfer coefficient at inside of the pipe) (A) K/h0 (B) 2K/h0 (C) hi /K (D) 2hi /K

Last Answer : (A) K/h0

A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just next to pipe (i.e., inside) (B) The better insulating material should be put outside (C) Either of the insulating material could be put on either side (D) Steam temperature is considered before deciding as to which insulating material is to be put inside (i.e., just next to the pipe)

Description : A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just ... to which insulating material is to be put inside (i.e., just next to the pipe)

Last Answer : (A) The better insulation material should be put just next to pipe (i.e., inside)

What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Last Answer : (A) 2

In the cables, sheaths are used to (a) prevent the moisture from entering the cable (b) provide enough strength (e) provide proper insulation (d) none of the above

Description : In the cables, sheaths are used to (a) prevent the moisture from entering the cable (b) provide enough strength (e) provide proper insulation (d) none of the above

Last Answer : (a) prevent the moisture from entering the cable

The ‘sheath’ is used in cable to (A) provide strength to the cable. (B) provide proper insulation. (C) prevent the moisture from entering the cable. (D) avoid chances of rust on strands.

Description : The ‘sheath’ is used in cable to (A) provide strength to the cable. (B) provide proper insulation. (C) prevent the moisture from entering the cable. (D) avoid chances of rust on strands.

Last Answer : Ans: A The sheath in underground cable is provided to give mechanical strength.

How insulation between the outer and inner walls of a home hleps to reduce thermal energy transfer?

Description : How insulation between the outer and inner walls of a home hleps to reduce thermal energy transfer?

Last Answer : Need answer

Do wood blinds offer any more heat insulation than plastic or metal window blinds?

Description : Do wood blinds offer any more heat insulation than plastic or metal window blinds?

Last Answer : No noticeable diffrence in your bill but does a little. it is more based on how dark the blinds are. the darker ones produce more heat and the lighter colored ones produce less. So if it is a light color and is wood it should be most effective.

How much insulation R factor do I need in exterior walls for Southeast Georgia sumertime heat Is greenboard and plastic necesary for carboy long term storage and screw cap 1.75 liter bottle storage How important is moisture in those conditions?

Description : How much insulation R factor do I need in exterior walls for Southeast Georgia sumertime heat Is greenboard and plastic necesary for carboy long term storage and screw cap 1.75 liter bottle storage How important is moisture in those conditions?

Last Answer : Plastic deteriorates in the sun. Good insulation is very important. I suggest going to Home Depot. They have free classes.

The primary function of the feathers in birds is to A. Provide insulation for preserving body heat B. Provide striking surface to the wings for flying C. Make the body surface waterproof D. Impart colouration for species as well as sex recognition

Description : The primary function of the feathers in birds is to A. Provide insulation for preserving body heat B. Provide striking surface to the wings for flying C. Make the body surface waterproof D. Impart colouration for species as well as sex recognition

Last Answer : ANSWER: B

Unnecessary and frequent applications of varnish to the generator windings to repair defective insulation will result in ____________. A. heavy coatings of varnish interfering with heat dissipation B. deficient air gap clearance and eventual damage to the casing C. failure of the rectifier assembly D. a built-up of varnish without changing generator operation

Description : Unnecessary and frequent applications of varnish to the generator windings to repair defective insulation will result in ____________. A. heavy coatings of varnish interfering with heat dissipation B. ... of the rectifier assembly D. a built-up of varnish without changing generator operation

Last Answer : Answer: A

Which of the following types of insulation will begin to deteriorate FIRST as a result of the heat generated in the conductor it surrounds? A. Varnished cloth B. Rubber C. Silicon D. Asbestos

Description : Which of the following types of insulation will begin to deteriorate FIRST as a result of the heat generated in the conductor it surrounds? A. Varnished cloth B. Rubber C. Silicon D. Asbestos

Last Answer : Answer: B

Electrical leads and insulation on a motor should be painted with ____________. A. heat-resisting acrylic B. heat-resisting aluminum C. insulating varnish D. insulating white lead

Description : Electrical leads and insulation on a motor should be painted with ____________. A. heat-resisting acrylic B. heat-resisting aluminum C. insulating varnish D. insulating white lead

Last Answer : Answer: C

Grounds occurring in electrical machinery as a result of insulation failure may result from _____________. A. deterioration through extended use B. excessive heat C. extended periods of vibration D. all of the above

Description : Grounds occurring in electrical machinery as a result of insulation failure may result from _____________. A. deterioration through extended use B. excessive heat C. extended periods of vibration D. all of the above

Last Answer : Answer: D

For a given ambient air temperature with increase in the thickness of insulation of a hot cylindrical pipe, the rate of heat loss from the surface would (A) Decrease(B) Increase(C) First decrease and then increase(D) First increase and then decrease

Description : For a given ambient air temperature with increase in the thickness of insulation of a hot cylindrical pipe, the rate of heat loss from the surface would (A) Decrease (B) Increase (C) First decrease and then increase (D) First increase and then decrease

Last Answer : (D) First increase and then decrease

The primary function of the feathers in birds is to -----? A. Provide insulation for preserving body heat B. Provide striking surface to the wings for flying (Answer) C. Make the body surface waterproof D. impart coloration for species as well as sex recognition

Description : The primary function of the feathers in birds is to -----? A. Provide insulation for preserving body heat B. Provide striking surface to the wings for flying (Answer) C. Make the body surface waterproof D. impart coloration for species as well as sex recognition

Last Answer : B. Provide striking surface to the wings for flying (Answer)

Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Description : Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Last Answer : (B) 25

Upto the critical radius of insulation, added insulation, will (A) Increase the heat loss (B) Decrease heat loss and will have no effect beyond that (C) Decrease heat flux (D) Reduce convection heat loss compared to conduction heat less

Description : Upto the critical radius of insulation, added insulation, will (A) Increase the heat loss (B) Decrease heat loss and will have no effect beyond that (C) Decrease heat flux (D) Reduce convection heat loss compared to conduction heat less

Last Answer : Option B

A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted will (A) Increase (B) Decrease (C) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Description : A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted ... ) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Last Answer : Option C

Cavity wall is generally provided for (A) Heat insulation (B) Sound insulation (C) Prevention of dampness (D) All the above

Description : Cavity wall is generally provided for (A) Heat insulation (B) Sound insulation (C) Prevention of dampness (D) All the above

Last Answer : Answer: Option D

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Thermal insulation is used to: w) stop the flow of heat. x) reduce the flow of heat. y) absorb heat. z) reverse the heat flow direction.

Description : Thermal insulation is used to: w) stop the flow of heat. x) reduce the flow of heat. y) absorb heat. z) reverse the heat flow direction.

Last Answer : ANSWER: X -- REDUCE THE FLOW OF HEAT. 

The writ of Prohibition is issued by a superior court - (1) to prevent an inferior court or tribunal from exceeding its jurisdiction or acting contrary to the rules of natural justice (2) to an inferior court or body exercising judicial or quasijudicial functions to transfer the record to proceedings in a case for its review (3) where it can call upon a person to show under what authority he/she is holding the office (4) to an authority to produce an illegally detained person before the court for trial.

Description : The writ of Prohibition is issued by a superior court - (1) to prevent an inferior court or tribunal from exceeding its jurisdiction or acting contrary to the rules of natural justice (2) to an ... the office (4) to an authority to produce an illegally detained person before the court for trial.

Last Answer : (1) to prevent an inferior court or tribunal from exceeding its jurisdiction or acting contrary to the rules of natural justice Explanation: The writ of Prohibition is an order from a superior ... because the lower court does not have proper jurisdiction to hear or determine the matters before it.

In the extracellular medium, DNA-degrading enzymes would likely be to prevent transfer of DNA by A- conjugal transfer by a self-transmissible plasmid B- generalized phage transduction C- natural transformation D- none of the above

Description : In the extracellular medium, DNA-degrading enzymes would likely be to prevent transfer of DNA by A- conjugal transfer by a self-transmissible plasmid B- generalized phage transduction C- natural transformation D- none of the above

Last Answer : natural transformation

In a shell and tube type heat exchanger, the floating tube bundle heat arrangement is used (A) In low range of temperature differences (B) In high range of temperature differences (C) Because of its low cost (D) To prevent corrosion of the tube bundles

Description : In a shell and tube type heat exchanger, the floating tube bundle heat arrangement is used (A) In low range of temperature differences (B) In high range of temperature differences (C) Because of its low cost (D) To prevent corrosion of the tube bundles

Last Answer : (B) In high range of temperature differences

What type of insulation should I use?

Description : What type of insulation should I use?

Last Answer : The vapor barrier goes on the out side wall. Unless money is real type I would replace all of the insulation. Talk to the people wherever you are buying your insulation (Lowes,Home depot or menards) And ... rolls and batts on mine. Is this going to be living space? If not things will be different.

What type of blinds provide the most insulation value?

Description : What type of blinds provide the most insulation value?

Last Answer : Wood blinds are the most effective at providing insulation value. Wood is a dense material that will serve to block heat from entering the house. Light color blinds are more effective at this than dark colored blinds.

What is the best type of attic insulation?

Description : What is the best type of attic insulation?

Last Answer : Insulation is rated in terms of thermal resistance, called R-value, which indicates the resistance to heat flow. The higher the R-value, the greater the insulating effectiveness. The R-value of thermal ... the R-value of a multi-layered installation, the R-values of the individual layers are added.

Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of dirt and conductive debris C. periodic testing of insulation resistance with a megger D. all of the above

Description : Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of ... debris C. periodic testing of insulation resistance with a megger D. all of the above

Last Answer : Answer: D

Routine maintenance of dry-type transformers should include ____________. A. cleaning the windings, if accessible, with a vacuum cleaner or very low pressure air B. measuring and recording the winding temperature with an accurate mercury thermometer C. periodic cleaning of the winding insulation with an approved solvent D. making sure that the units are close to bulkheads or corners to protect them from damage

Description : Routine maintenance of dry-type transformers should include ____________. A. cleaning the windings, if accessible, with a vacuum cleaner or very low pressure air B. measuring and recording the winding ... . making sure that the units are close to bulkheads or corners to protect them from damage

Last Answer : Answer: A

What type of insulation is done for stator bars?

Description : What type of insulation is done for stator bars?

Last Answer : Bar insulation is done with epoxy mica thermosetting insulation. This insulation is void free and possesses better mechanical properties. This insulation is more reliable for higher voltages. Conductors are ... After curing the insulation the epoxy resin (glue) fill all voids in the insulation. 

Solid type cables are considered unreliable beyond 66 kV because (a) insulation may melt due to higher temperature (b) skin effect dominates on the conductor (c) of corona loss between conductor and sheath material (d) there is a danger of breakdown of insulation due to the presence of voids

Description : Solid type cables are considered unreliable beyond 66 kV because (a) insulation may melt due to higher temperature (b) skin effect dominates on the conductor (c) of corona loss between conductor and sheath material (d) there is a danger of breakdown of insulation due to the presence of voids

Last Answer : (d) there is a danger of breakdown of insulation due to the presence of voids

The size of a conductor used in power cables depends on the (A) operating voltage. (B) power factor. (C) current to be carried. (D) type of insulation used.

Description : The size of a conductor used in power cables depends on the (A) operating voltage. (B) power factor. (C) current to be carried. (D) type of insulation used.

Last Answer : (C) current to be carried.

Which type of protection is provided on a generator to protect against stator insulation failure?

Description : Which type of protection is provided on a generator to protect against stator insulation failure? A) Differential protection B) Overcurrent relay C) Thermocouple actuated alarm D) Reverse power relay

Last Answer : Which type of protection is provided on a generator to protect against stator insulation failure? A) Differential protection B) Overcurrent relay C) Thermocouple actuated alarm D) Reverse power relay 

What type of heat transfer is affected by the colour of surfaces?

Description : What type of heat transfer is affected by the colour of surfaces?

Last Answer : Need answer

What type of heat transfer that causes the air to circulate and form such clouds is called .?

Description : What type of heat transfer that causes the air to circulate and form such clouds is called .?

Last Answer : You think probable to convection.

What type of heat transfer cause plates to move?

Description : What type of heat transfer cause plates to move?

Last Answer : conduction

What type of heat transfer occurs when a hot air furnace heats our home?

Description : What type of heat transfer occurs when a hot air furnace heats our home?

Last Answer : What is the answer ?

What type of heat transfer takes place when a furnace heats up an entire room?

Description : What type of heat transfer takes place when a furnace heats up an entire room?

Last Answer : So in order for a furnace to heat up in the first place, there needs to be a fuel or substance that heats or absorbs heat. This can be gas, coal, or charcoal. In addition, the fuel or coal, the fire ... begin to spread. Causing heat, or humid to form in the room you are in.HOPE THIS HELPED:)))))

In a plate type heat exchanger, heat transfer plates are never made of (A) Stainless steel (B) Cast iron (C) Titanium (D) Hastelloy C

Description : In a plate type heat exchanger, heat transfer plates are never made of (A) Stainless steel (B) Cast iron (C) Titanium (D) Hastelloy C

Last Answer : (B) Cast iron

Radiation heat transfer rates does not depend upon the (A) Type of absorbing surface (B) Distance between the heat source and the object receiving the heat (C) Surface area and temperature of the heat source (D) None of these

Description : Radiation heat transfer rates does not depend upon the (A) Type of absorbing surface (B) Distance between the heat source and the object receiving the heat (C) Surface area and temperature of the heat source (D) None of these

Last Answer : (D) None of these

In case of a multipass shell and tube heat exchanger, providing a baffle on the shell side __________ the heat transfer rate. (A) Increases (B) Decreases (C) Does not affect (D) May increase or decrease, depends on the type of baffle

Description : In case of a multipass shell and tube heat exchanger, providing a baffle on the shell side __________ the heat transfer rate. (A) Increases (B) Decreases (C) Does not affect (D) May increase or decrease, depends on the type of baffle

Last Answer : (A) Increases

The heat transfer co-efficient in film type condensation is __________ that for dropwise condensation. (A) Greater than (B) Lower than (C) Is same as (D) Half

Description : The heat transfer co-efficient in film type condensation is __________ that for dropwise condensation. (A) Greater than (B) Lower than (C) Is same as (D) Half

Last Answer : (B) Lower than

Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Description : Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Last Answer : (A) Type of fuels viz. solid, liquid or gaseous

Maximum heat transfer in high temperature furnaces is by (A) Conduction (B) Convection (C) Radiation (D) Either (A), (B) or (C); depends on the type of furnace

Description : Maximum heat transfer in high temperature furnaces is by (A) Conduction (B) Convection (C) Radiation (D) Either (A), (B) or (C); depends on the type of furnace

Last Answer : (C) Radiation

Heat transfer to the water wall in a high pressure water wall type boiler furnace is mainly by (A) Conduction (B) Convection (C) Radiation (D) Both 'a' & 'b'

Description : Heat transfer to the water wall in a high pressure water wall type boiler furnace is mainly by (A) Conduction (B) Convection (C) Radiation (D) Both 'a' & 'b'

Last Answer : Option C