What temperatures is a safe core temperature for cooking food?

What temperatures is a safe core temperature for cooking food?
by

1 Answer

Answer :

165 degrees
by
selected by

Related questions

What is safe core temperature for cooking food?

Description : What is safe core temperature for cooking food?

Last Answer : It depends on the food. To be extra safe over 200 degrees

The water core disease of apples is caused by (a) boron deficiency (b) bacterial infection (c) fungal infection (d) high temperatures

Description : The water core disease of apples is caused by (a) boron deficiency (b) bacterial infection (c) fungal infection (d) high temperatures

Last Answer : Ans:(d)

Is it safe to re cook pulled **** that stalled on a smoker over night. it got to 125 degrees and the smoker shut down. it sat outside with 50 degree temperatures all night?

Description : Is it safe to re cook pulled pork that stalled on a smoker over night. it got to 125 degrees and the smoker shut down. it sat outside with 50 degree temperatures all night?

Last Answer : We can't answer this question because too much criticalinformation is missing - like what the temperature of the meat wasduring all this time.50 degrees is still in the temperature danger zone, though it ... .No one could assure you that re-cooked meat would be safe toeat. The decision is yours.

How does an infrared cooking grill work and is it safe?

Description : How does an infrared cooking grill work and is it safe?

Last Answer : the short answer is that it works by emitting infrared light directly instead of burning something to get heat, or running electricity through a coil to create electrical resistance and thus create heat. it' ... which is to say be careful not to cook yourself or leave anything flammable in the way.

Is it safe to use a hydrochloric acid and water mixture to clean cooking cast-iron and if so, what ratio would be good?

Description : Is it safe to use a hydrochloric acid and water mixture to clean cooking cast-iron and if so, what ratio would be good?

Last Answer : Metals such as aluminum, cast iron, steel, copper, and titanium will suffer rapid attack from HCl at all concentrations and temperatures.

Is propane gas stove safe for indoor cooking?

Description : Is propane gas stove safe for indoor cooking?

Last Answer : No. It is not safe for Indoor cooking due to the danger of fire and emission of carbon monoxide from burning fuel and the effects of carbon monoxide exposure.

Are silicone cooking utensils safe for my family?

Description : Are silicone cooking utensils safe for my family?

Last Answer : Yes, silicone cooking utensils are safe for your family. They are safer than plastic to cook with, especially at higher heats. You can even find silicone baking cups!

Is it safe to use teflon utensils when you're cooking?

Description : Is it safe to use teflon utensils when you're cooking?

Last Answer : It is safe to use Teflon cookware.

Pressure Cooker cooks faster because (1) boiling point decreases with rise of pressure (2) it cooks the food at low pressure (3) higher temperature is attained for cooking (4) the material of the cooker is a good conductor

Description : Pressure Cooker cooks faster because (1) boiling point decreases with rise of pressure (2) it cooks the food at low pressure (3) higher temperature is attained for cooking (4) the material of the cooker is a good conductor

Last Answer : (3) higher temperature is attained for cooking Explanation: In pressure cooker boiling point of water increases due to high pressure.

Pressure Cooker cooks faster because (1) boiling point decreases with rise of pressure (2) it cooks the food at low pressure (3) higher temperature is attained for cooking (4) the material of the cooker is a good conductor

Description : Pressure Cooker cooks faster because (1) boiling point decreases with rise of pressure (2) it cooks the food at low pressure (3) higher temperature is attained for cooking (4) the material of the cooker is a good conductor

Last Answer : higher temperature is attained for cooking 

What if your normal body temperature is around 94.6? would that mean that the fever temperatures would be measured differently too?

Description : What if your normal body temperature is around 94.6? would that mean that the fever temperatures would be measured differently too?

Last Answer : answer:It may be that a lower body temperature is itself a symptom of something. That said, fevers are marked by your body temperature exceeding normal levels. If you are reliably around 95 ... . I expect that this means that you have a greater range between normal and dangerous temperatures.

At what temperature are Celsius and Fahrenheit temperatures equal? -General Knowledge

Description : At what temperature are Celsius and Fahrenheit temperatures equal? -General Knowledge

Last Answer : Celsius and Fahrenheit are two important temperature scales. Celsius is used throughout the world whereas Fahrenheit scale is used primarily in the United States. There is one point on the Fahrenheit and Celsius scales where the temperatures in degrees are equal. This is -40 °C and -40 °F.

At what temperature are Celsius and Fahrenheit temperatures equal? -General Knowledge

Description : At what temperature are Celsius and Fahrenheit temperatures equal? -General Knowledge

Last Answer : Celsius and Fahrenheit are two temperature scales. The Fahrenheit and Celsius scales have one point at which they intersect. They are equal at -40 °C and -40 °F. The simple method to find when two ... is to set the conversion factors for the two scales equal to each other and solve for temperature.

At what temperature are Celsius and Fahrenheit temperatures equal? -General Knowledge

Description : At what temperature are Celsius and Fahrenheit temperatures equal? -General Knowledge

Last Answer : Celsius and Fahrenheit are two important temperature scales. Celsius is used throughout the world whereas Fahrenheit scale is used primarily in the United States. There is one point on the Fahrenheit and Celsius scales where the temperatures in degrees are equal. This is -40 °C and -40 °F.

If two temperatures differ by 25°C on Celsius scale, the difference in temperature on Fahrenheit scale is

Description : If two temperatures differ by 25°C on Celsius scale, the difference in temperature on Fahrenheit scale is

Last Answer : If two temperatures differ by 25°C on Celsius scale, the difference in temperature on Fahrenheit scale is (A) 65° (B) 45° (C) 38° (D) 25°

How does the temperature of the world and oceans today compare to their temperatures in the recorded past?

Description : How does the temperature of the world and oceans today compare to their temperatures in the recorded past?

Last Answer : Need answer

Mariana wears her winter coat when the temperature is colder than -4 celsius. Write an inequality that is true only for temperatures (t) at which Mariana wears her winter coat.?

Description : Mariana wears her winter coat when the temperature is colder than -4 celsius. Write an inequality that is true only for temperatures (t) at which Mariana wears her winter coat.?

Last Answer : 42w

Which is true A. The ocean has no effect on the temperature on the land. B. Ocean currents affect temperatures on land. C. All ocean water is the same temperature. D. Ocean water does not move between locations.?

Description : Which is true A. The ocean has no effect on the temperature on the land. B. Ocean currents affect temperatures on land. C. All ocean water is the same temperature. D. Ocean water does not move between locations.?

Last Answer : B. Ocean currents affect temperatures on land.

Which of the following factors increases the tendency of knocking in the CI engines? (a) Increasing both the r and coolant temperatures (b) Increasing both the speed and the injection advance (c) Increasing the speed, injection advance and coolant temperature (d) Increasing the compression ratio

Description : Which of the following factors increases the tendency of knocking in the CI engines? (a) Increasing both the r and coolant temperatures (b) Increasing both the speed and the injection advance (c) Increasing the speed, injection advance and coolant temperature (d) Increasing the compression ratio

Last Answer : Ans :c

The five key indicators of global climate change of our planet are (1) Antartic Sea ice, Oxygen, Rain-fall, Drought and Sea level (2) Sea-level, Rising temperatures, Rainfall, Nitrogen and Arctic Sea ice (3) Arctic Sea ice, Carbon dioxide, Global Temperature, Sea level and Land ice (4) None of these

Description : The five key indicators of global climate change of our planet are (1) Antartic Sea ice, Oxygen, Rain-fall, Drought and Sea level (2) Sea-level, Rising temperatures, Rainfall, Nitrogen and Arctic Sea ice (3) Arctic Sea ice, Carbon dioxide, Global Temperature, Sea level and Land ice (4) None of these

Last Answer : (3) Arctic Sea ice, Carbon dioxide, Global Temperature, Sea level and Land ice.

The wavelength at which the peak of intensity of blackbody radiation Occurs – (1) increases with increase in temperature (2) decreases with increase in temperature (3) is the same at all temperatures (4) does not follow any pattern as temperature changes

Description : The wavelength at which the peak of intensity of blackbody radiation Occurs – (1) increases with increase in temperature (2) decreases with increase in temperature (3) is the same at all temperatures (4) does not follow any pattern as temperature changes

Last Answer : (2) decreases with increase in temperature Explanation: According to Wien's displacement law, when the temperature of a blackbody radiator increases, the overall radiated energy increases. ... to its temperature. Shorter-wavelength (higher-frequency) light corresponds to higherenergy photons.

Superconductors are those elements – (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperature (3) Which conduct electricity only at super-high temperature (4) Which conduct electricity only, at super-high temperatures

Description : Superconductors are those elements – (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperature (3) Which conduct electricity only at super-high temperature (4) Which conduct electricity only, at super-high temperatures

Last Answer : (2) Whose resistance falls almost to zero at very low temperature Explanation: Superconductivity is a phenomenon of exactly zero electrical resistance and expulsion of magnetic fields occurring in ... lines from the interior of the superconductor as it transitions into the superconducting state.

Cryogenic is a science deals with - (1) High Temperatures (2) Low Pressure (3) High Pressure (4) Low Temperature

Description : Cryogenic is a science deals with - (1) High Temperatures (2) Low Pressure (3) High Pressure (4) Low Temperature

Last Answer : (4) Low Temperature Explanation: Cryogenics is the branch of physics that deals with the production and effects of very low temperatures.

Which of the following temperatures represents the maximum allowable temperature for the electrolyte of a lead-acid battery? A. 100°F B. 125°F C. 145°F D. 212°F

Description : Which of the following temperatures represents the maximum allowable temperature for the electrolyte of a lead-acid battery? A. 100°F B. 125°F C. 145°F D. 212°F

Last Answer : Answer: B

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) Humidified with wet bulb temperature decreasingB) Humidified at constant wet bulb temperature(C) Dehumidified(D) None of these

Description : Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) ... temperature decreasing B) Humidified at constant wet bulb temperature (C) Dehumidified (D) None of these

Last Answer : (A) Humidified with wet bulb temperature decreasing

A hollow sphere and a solid sphere of the same material and equal radii are heated to the same temperature. In this case, (A) The cooling rate will be the same for the two spheres and hence the two spheres will have equal temperatures at any instant (B) Both the spheres will emit equal amount of radiation per unit time in the beginning (C) Both will absorb equal amount of radiation from the surrounding in the beginning (D) Both (B) & (C)

Description : A hollow sphere and a solid sphere of the same material and equal radii are heated to the same temperature. In this case, (A) The cooling rate will be the same for the two spheres and hence the ... equal amount of radiation from the surrounding in the beginning (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

In the equation Q = UAΔt; Δt is (A) Geometric mean temperature difference (B) Arithmetic mean temperature difference (C) Logarithmic mean temperature difference (D) The difference of average bulk temperatures of hot and cold fluids

Description : In the equation Q = UAΔt; Δt is (A) Geometric mean temperature difference (B) Arithmetic mean temperature difference (C) Logarithmic mean temperature difference (D) The difference of average bulk temperatures of hot and cold fluids

Last Answer : (C) Logarithmic mean temperature difference

Three of the following statements about enzymes are correct and one is wrong. Which one is wrong? (a) Enzymes require optimum pH for maximal activity. (b) Enzymes are denatured at high temperature but in certain exceptional organisms they are effective even at temperatures 80° - 90°C. (c) Enzymes are highly specific. (d) Most enzymes are proteins but some are lipids.

Description : Three of the following statements about enzymes are correct and one is wrong. Which one is wrong? (a) Enzymes require optimum pH for maximal activity. (b) Enzymes are denatured at high temperature but ... - 90°C. (c) Enzymes are highly specific. (d) Most enzymes are proteins but some are lipids.

Last Answer : (d) Most enzymes are proteins but some are lipids.

Which of the following statements about enzymes is wrong? (a) Enzymes are denatured at high temperatures. (b) Enzymes are mostly proteins but some are lipids also. (c) Enzymes are highly specific. (d) Enzymes require optimum pH and temperature for maximum activity

Description : Which of the following statements about enzymes is wrong? (a) Enzymes are denatured at high temperatures. (b) Enzymes are mostly proteins but some are lipids also. (c) Enzymes are highly specific. (d) Enzymes require optimum pH and temperature for maximum activity

Last Answer : (b) Enzymes are mostly proteins but some are lipids also.

Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above __________ °C, because corrosion prevails at higher temperatures. (A) 350 (B) 750 (C) 1050 (D) 1250

Description : Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above __________ °C, because corrosion prevails at higher temperatures. (A) 350 (B) 750 (C) 1050 (D) 1250

Last Answer : (B) 750

Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) Burning the fuel with theoretically required amount of pure oxygen results in attainment of maximum adiabatic flame temperature (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Description : Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) ... flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Last Answer : (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature

Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the reaction is practically irreversible in nature (C) The intercept of the Arrhenius plot is called the 'activation energy' (D) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Description : Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the ... ) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Last Answer : (C) The intercept of the Arrhenius plot is called the 'activation energy

Organic catalysts differ from the inorganic catalyst in the sense that the former is (A) Active at cryogenic temperatures only (B) Prohibitively costly (C) Proteinous in nature (D) Active at very high temperature only

Description : Organic catalysts differ from the inorganic catalyst in the sense that the former is (A) Active at cryogenic temperatures only (B) Prohibitively costly (C) Proteinous in nature (D) Active at very high temperature only

Last Answer : (C) Proteinous in nature

What is the value of maximum COP in case of absorption refrigeration, if refrigeration provided is at temperature, TR (where, T1 and T2 are source & surrounding temperatures respectively.)? (A) TR/(T2 - TR) × (T1 - T2 )/T1 (B) TR/(T2 - TR) × T1 /(T1 - T2 ) (C) TR/(T1 - TR) × (T1 - T2 )/T1 (D) None of these

Description : What is the value of maximum COP in case of absorption refrigeration, if refrigeration provided is at temperature, TR (where, T1 and T2 are source & surrounding temperatures respectively.)? (A) TR/(T2 - TR) (T1 - T2 )/T1 (B) TR ... T1 /(T1 - T2 ) (C) TR/(T1 - TR) (T1 - T2 )/T1 (D) None of these

Last Answer : (A) TR/(T2 - TR) × (T1 - T2 )/T1

Efficiency of a heat engine working on Carnot cycle between two temperature levels depends upon the (A) Two temperatures only (B) Pressure of working fluid (C) Mass of the working fluid (D) Mass and pressure both of the working fluid

Description : Efficiency of a heat engine working on Carnot cycle between two temperature levels depends upon the (A) Two temperatures only (B) Pressure of working fluid (C) Mass of the working fluid (D) Mass and pressure both of the working fluid

Last Answer : (A) Two temperatures only

Which one is true for a throttling process? (A) A gas may have more than one inversion temperatures (B) The inversion temperature is different for different gases (C) The inversion temperature is same for all gases (D) The inversion temperature is the temperature at which Joule-Thomson co-efficient is infinity

Description : Which one is true for a throttling process? (A) A gas may have more than one inversion temperatures (B) The inversion temperature is different for different gases (C) The inversion ... gases (D) The inversion temperature is the temperature at which Joule-Thomson co-efficient is infinity

Last Answer : (B) The inversion temperature is different for different gases

In vapour compression refrigeration system, if the evaporator temperature and the condenser temperatures are -13°C and 37°C respectively, the Carnot COP will be (A) 5.2 (B) 6.2 (C) 0.168 (D) Data insufficient, can't be found out

Description : In vapour compression refrigeration system, if the evaporator temperature and the condenser temperatures are -13°C and 37°C respectively, the Carnot COP will be (A) 5.2 (B) 6.2 (C) 0.168 (D) Data insufficient, can't be found out

Last Answer : A) 5.2

The temperatures of the ideal gas temperature scale are measured by using a ______.  A. Constant-volume gas thermometer  B. Constant-mass gas thermometer  C. Constant-temperature gas thermometer  D. Constant-pressure gas thermometer

Description : The temperatures of the ideal gas temperature scale are measured by using a ______.  A. Constant-volume gas thermometer  B. Constant-mass gas thermometer  C. Constant-temperature gas thermometer  D. Constant-pressure gas thermometer

Last Answer : Constant-volume gas thermometer

The greater the pressure gradient the: a. Closer the isobars and the lower the temperatures b. Further the isobars will be apart and the higher the temperature c. Closer the isobars and the stronger the wind

Description : The greater the pressure gradient the:  a. Closer the isobars and the lower the temperatures  b. Further the isobars will be apart and the higher the temperature  c. Closer the isobars and the stronger the wind

Last Answer : c. Closer the isobars and the stronger the wind

The greater the pressure gradient the: a. Closer the isobars and the lower the temperatures b. Further the isobars will be apart and the higher the temperature c. Closer the isobars and the stronger the wind d. Further the isobars will be apart and the weaker the wind

Description : The greater the pressure gradient the: a. Closer the isobars and the lower the temperatures b. Further the isobars will be apart and the higher the temperature c. Closer the isobars and the stronger the wind d. Further the isobars will be apart and the weaker the wind

Last Answer : c. Closer the isobars and the stronger the wind

What must be considered when using flanges at the ratings listed in ASME B16.5 at low temperatures? a) Toughness. b) Shock loadings. c) Sudden changes of stress or temperature. d) All of the above.

Description : What must be considered when using flanges at the ratings listed in ASME B16.5 at low temperatures? a) Toughness. b) Shock loadings. c) Sudden changes of stress or temperature. d) All of the above.

Last Answer : c) Sudden changes of stress or temperature.

When flanged fittings are to be used at temperatures below -20°F, what pressure rating is to be used? a) The pressure rating at the actual service temperature, found by interpretation. b) The pressure rating at -20°F. c) The pressure equal to the flange class. d) Flanges complying with ASME B16.5 may not be used below -20°F.

Description : When flanged fittings are to be used at temperatures below -20°F, what pressure rating is to be used? a) The pressure rating at the actual service temperature, found by interpretation. b) The pressure ... to the flange class. d) Flanges complying with ASME B16.5 may not be used below -20°F.

Last Answer : b) The pressure rating at -20°F.

Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is retained in ETC iii) heat loss due to conduction back to atmosphere from ETC is high iv) performance of evacuated tube is highly dependent upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Description : Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is ... upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Last Answer : d) i & ii

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation rate (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum (3) Tomato is a greenhouse crop which can be grown in CO 2 - enriched atmosphere for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation ... for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Last Answer : (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum

High-temperature superconductors have been in the news lately. These materials become superconductive at temperatures around w) 200 degrees Fahrenheit x) 100 degrees Fahrenheit y) -150 degrees Fahrenheit z) -350 degrees Fahrenheit

Description : High-temperature superconductors have been in the news lately. These materials become superconductive at temperatures around w) 200 degrees Fahrenheit x) 100 degrees Fahrenheit y) -150 degrees Fahrenheit z) -350 degrees Fahrenheit

Last Answer : ANSWER: Z -- -350 DEGREES FAHRENHEIT  

The five key indicators of global climate change of our planet are : (1) Antartic Sea ice, Oxygen, Rainfall, Drought and Sea level (2) Sea-level, Rising temperatures, Rainfall, Nitrogen and Arctic Sea ice (3) Arctic Sea ice, Carbon dioxide, Global Temperature, Sea level and Land ice. (4) None of these

Description : The five key indicators of global climate change of our planet are : (1) Antartic Sea ice, Oxygen, Rainfall, Drought and Sea level (2) Sea-level, Rising temperatures, Rainfall, Nitrogen and Arctic Sea ... Arctic Sea ice, Carbon dioxide, Global Temperature, Sea level and Land ice. (4) None of these 

Last Answer :  Arctic Sea ice, Carbon dioxide, Global Temperature, Sea level and Land ice.

The wavelength at which the peak of intensity of blackbody radiation occurs (1) increases with increase in temperature (2) decreases with increase in temperature (3) is the same at all temperatures (4) does not follow any pattern as temperature changes

Description : The wavelength at which the peak of intensity of blackbody radiation occurs (1) increases with increase in temperature (2) decreases with increase in temperature (3) is the same at all temperatures (4) does not follow any pattern as temperature changes

Last Answer : decreases with increase in temperature

Should I lower the oven temperature or shorten the cooking time?

Description : Should I lower the oven temperature or shorten the cooking time?

Last Answer : Never tried this, but I think a lower temperature and maybe moving the eggs around while they cook might help. What temperature did you use?

If I want the outside of a cake to cook faster because I am using a smaller pan, should I raise the cooking temperature or maybe put the pan on a lower rack?

Description : If I want the outside of a cake to cook faster because I am using a smaller pan, should I raise the cooking temperature or maybe put the pan on a lower rack?

Last Answer : I would think lower the temperature a little and go a little longer with the cooking. I would have to figure that out by trial and error though. Slower cooking so it goes all the way through seem logical.