How do you reset camshaft reset valve exhaust signal too low ECM- 616D?

How do you reset camshaft reset valve exhaust signal too low ECM- 616D?
by

1 Answer

Answer :

Need answer
by
selected by

Related questions

The size of inlet valve of an engine in comparison to exhaust valve is A. more B. less C. same D. varies from design to design

Description : The size of inlet valve of an engine in comparison to exhaust valve is A. more B. less C. same D. varies from design to design

Last Answer : ANSWER : B

Based on the exhaust gas analysis, a controller maintains stoichiometric combustion __ a. by commanding a servo motor to adjust the combustion air damper b. By commanding servo motor to adjust the fuel supply valve. c. Both a. & b. d. None of the above.

Description : Based on the exhaust gas analysis, a controller maintains stoichiometric combustion __ a. by commanding a servo motor to adjust the combustion air damper b. By commanding servo motor to adjust the fuel supply valve. c. Both a. & b. d. None of the above.

Last Answer : c. Both a. & b.

In a four stroke I.C engine completing 3000rpm the natural frequency of vibration of the exhaust valve should be a. 1200 Hz b. 1000 Hz c. 600 Hz d. 120 Hz

Description : In a four stroke I.C engine completing 3000rpm the natural frequency of vibration of the exhaust valve should be a. 1200 Hz b. 1000 Hz c. 600 Hz d. 120 Hz

Last Answer : b. 1000 Hz

Volumetric efficiency is affected by (A) Turbulence velocity and temperature of intake manifold (B) Efficiency of exhaust stroke (C) Valve timing overlap (D) All the above

Description : Volumetric efficiency is affected by (A) Turbulence velocity and temperature of intake manifold (B) Efficiency of exhaust stroke (C) Valve timing overlap (D) All the above

Last Answer : (D) All the above

Name the sensors which are placed at intake manifold ,throttle valve, water jacket and exhaust manifold.

Description : Name the sensors which are placed at intake manifold ,throttle valve, water jacket and exhaust manifold. 

Last Answer : Sensors: Intake manifolds:- Mass air flow sensor (MAF), Manifold absolute pressure sensor (MAP) Throttle valve:- Throttle position sensor (TPS) Water jacket:- Engine temperature sensor or coolant temperature sensor Exhaust manifolds: - Exhaust gas temperature sensor, Oxygen sensor (O2)

What is the full form of 'ECM' ? -How To ?

Description : What is the full form of 'ECM' ? -How To ?

Last Answer : The full form of 'ECM' is European Common Market

What is the full form of ECM ?

Last Answer : ECM - European Common Market

Illustrate idle speed control as an output control function of ECM.

Description : Illustrate idle speed control as an output control function of ECM.

Last Answer : Idle Speed Control as Output function of a ECM: While the engine is being started, or operated, the logic module of Electronic Control Module (ECM) will signal the Stepper motor of Idle Speed Control ( ... control valve stepper motor allows 125 possible valve opening positions.  OR

What is ECM? Explain how fuel injection is controlled using ECM.

Description : What is ECM? Explain how fuel injection is controlled using ECM.

Last Answer : ECM-The ECM is Electronic control module. It evaluates the sensor inputs using data tables and calculations to determine the output of the actuating devices. The ECM processes signals from the various sensors ... (MS) and the fuel flow from the injector increases in relation to the pulse width.

State input and output control functions of ECM. Describe the idle speed control with sketch.

Description : State input and output control functions of ECM. Describe the idle speed control with sketch. 

Last Answer : Inputs and outputs of Electronic Control Module The inputs of ECM 1. The Ignition (Engine Speed Sensor). 2. Temperature Sensor (Coolant Temperature). 3. Throttle Potentiometer (Intake ... through. The Idle speed control valve stepper motor allows 125 possible valve opening positions. 

Explain the purpose of electrolyte in ECM.

Description : Explain the purpose of electrolyte in ECM.

Last Answer : Ans: Purpose of electrolyte in ECM process 1. It is conductive medium without which ECM process cannot be performed. 2. It carries the current between the tool and the work piece. 3. It ... ECM process from the cutting region It helps to remove heat produced by the current flow in the operation

Illustrate with example of fuel injection as an output control function of ECM.

Description : Illustrate with example of fuel injection as an output control function of ECM.

Last Answer : Fuel Injection as an Output Control Function of ECM: ECM controls fuel injection by calculating A: F ratio needed for engine. Engine requires different air fuel ratios while cranking, warm- up, idle, ... open, allowing enough air into the engine for start and idle (Throttle body valve is closed).

an automotive engine's camshaft rotates at -General Knowledge

Description : an automotive engine's camshaft rotates at -General Knowledge

Last Answer : An automotive engine's camshaft rotates at one-half the speed of the crankshaft.

how do I replace a camshaft synchronizer on a 1998 ford 4.2L

Description : how do I replace a camshaft synchronizer on a 1998 ford 4.2L

Last Answer : Need Answer

Will a bad camshaft sensor keep fuel pump from coming on?

Description : Will a bad camshaft sensor keep fuel pump from coming on?

Last Answer : Feel Free to Answer

Where is the camshaft sensor on a 97 Mitsubishi diamante at?

Description : Where is the camshaft sensor on a 97 Mitsubishi diamante at?

Last Answer : What is the answer ?

The _____________ sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: d Explanation: The knock sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded while the camshaft position sensor, senses ... the engine intake manifold so that the mixture strength can be adjusted with changes in engine load.

The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: c Explanation: The camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection whereas the throttle position sensor, senses the movement of the throttle ... engine intake manifold so that the mixture strength can be adjusted with changes in engine load.

The ___________ sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The ___________ sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: b Explanation: The manifold pressure sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load and the camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection.

The _____________ sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: a Explanation: The throttle position sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration while the manifold ... the camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection.

Choke in a I.C. engine is used to control a) Camshaft speed b) Specific fuel consumption c) Air fuel mixture d) Crankshaft speed Ans. c

Description : Choke in a I.C. engine is used to control a) Camshaft speed b) Specific fuel consumption c) Air fuel mixture d) Crankshaft speed Ans. c

Last Answer : ans c

Describe the construction of gear drive of camshaft drive arrangement with sketch.

Description : Describe the construction of gear drive of camshaft drive arrangement with sketch.

Last Answer : Gear Drive of Camshaft Drive: Camshaft is driven by the crankshaft either by a pair of meshing gears (timing gears) or by means of a pair of timing sprocket connected by a chain ... and crankshaft to ensure opening the valves exactly at the correct time in relation to piston position. 

Explain forging sequence for camshaft.

Description : Explain forging sequence for camshaft.

Last Answer : Forging process for manufacturing Camshaft: i) Stock is redistributed and size is increased at certain places & reduced at others by rolled forging. ii) after preliminary roll forging, the stock is ... v) finished part is trimmed in blanking die to remove excess metal or flash.

Which is not the control bus signal: a. READ b. WRITE c. RESET

Description : Which is not the control bus signal: a. READ b. WRITE c. RESET

Last Answer : c. RESET

Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more as compared to that emitted by a four stroke engine (C) Carbon monoxide present in the two stroke petrol engine exhaust is much less as compared to that emitted from a four stroke engine (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Description : Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more ... can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Last Answer : (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

__________ the exhaust gas is an indication of the incomplete combustion of fuel. (A) Low temperature of (B) High temperature of (C) High % of CO in (D) High % of CO2in

Description : __________ the exhaust gas is an indication of the incomplete combustion of fuel. (A) Low temperature of (B) High temperature of (C) High % of CO in (D) High % of CO2in

Last Answer : (C) High % of CO in

The system is suitable to recover heat from ........ temperature exhaust gases . a) Medium-low b) Medium-high c) High-low d) High

Description : The system is suitable to recover heat from ........ temperature exhaust gases . a) Medium-low b) Medium-high c) High-low d) High

Last Answer : Medium-high

Which of the following needs to be incorporated to prevent the low pressure turbine exhaust wetness from being excessive? a) Double regeneration b) Double carbonization c) Double reheat d) Double cooling

Description : Which of the following needs to be incorporated to prevent the low pressure turbine exhaust wetness from being excessive? a) Double regeneration b) Double carbonization c) Double reheat d) Double cooling

Last Answer : c) Double reheat

It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Description : It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Last Answer : Thrust

How reset low tireon 2007 Colorado?

Description : How reset low tireon 2007 Colorado?

Last Answer : Need answer

Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions properly and trips generator #1 electrically off the bo A. Start the emergency generator. B. Ascertain cause of the low lube oil pressure. C. Strip the board of all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Description : Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions ... all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Last Answer : Answer: C

The 'reset' contacts of the master switch shown in the illustration provides the winch controller with ___________. EL-0102 A. low voltage release B. overload protection C. low voltage protection D. high power factor correction

Description : The 'reset' contacts of the master switch shown in the illustration provides the winch controller with ___________. EL-0102 A. low voltage release B. overload protection C. low voltage protection D. high power factor correction

Last Answer : Answer: C

Assume that K goes HIGH and J goes LOW; when will the FF reset?

Description : Assume that K goes HIGH and J goes LOW; when will the FF reset?

Last Answer : When the clock pulse goes LOW.

Erosion and pits formation on the impeller of a centrifugal pump may be due to (A) Cavitation (B) Low speed of impeller (C) Its operation with delivery valve closed for considerable time after starting the pump (D) Off centering of pump with motor

Description : Erosion and pits formation on the impeller of a centrifugal pump may be due to (A) Cavitation (B) Low speed of impeller (C) Its operation with delivery valve closed for considerable time after starting the pump (D) Off centering of pump with motor

Last Answer : (A) Cavitation

A safety valve usually employed with stationary boilers is (A) Lever safety valve (B) Dead weight safety valve (C) High steam and low water safety valve (D) All of these

Description : A safety valve usually employed with stationary boilers is (A) Lever safety valve (B) Dead weight safety valve (C) High steam and low water safety valve (D) All of these

Last Answer : (D) All of these

A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Description : A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

The DME in an aircraft, cruising at FL210, fails to achieve a lock on a DME at MSL at a range of 210nm. The reason for this is: a. The beacon is saturated b. The aircraft is beyond the maximum usable range for DME c. The aircraft is beyond line of sight range d. The aircraft signal is too weak at the range to trigger a response

Description : The DME in an aircraft, cruising at FL210, fails to achieve a lock on a DME at MSL at a range of 210nm. The reason for this is: a. The beacon is saturated b. The aircraft is beyond ... is beyond line of sight range d. The aircraft signal is too weak at the range to trigger a response

Last Answer : c. The aircraft is beyond line of sight range

How does one measure the efficiency of an exhaust vent?

Description : How does one measure the efficiency of an exhaust vent?

Last Answer : Efficiency is not the metric, so they have no idea what you are talking about. How about room air exchanges per hour? That would be the volume of air removed per hour divided by volume (length x width ... of air in the room. But then you would have to find guidelines relative to usage of the room.

Who was first to ask when our sun might exhaust itself?

Description : Who was first to ask when our sun might exhaust itself?

Last Answer : Another one of THOSE questions based on an absence of basic understanding. Nothing could be more vague than the term modern scientific understanding . Considering that the composition and functioning of the ... as to HOW the fuel is burned. So when was the concept of nuclear fusion established?

Does it exhaust you to be held accountable for everything you say and do?

Description : Does it exhaust you to be held accountable for everything you say and do?

Last Answer : Well, I don’t really know…depends on who’s doing the scrutinizing. Generally speaking, if the person isn’t my mother, I do not mind being held accountable for what I say and do. People should be so accountable.

What might have caused new car with 29000 miles have white smoke from exhaust?

Description : What might have caused new car with 29000 miles have white smoke from exhaust?

Last Answer : This is what I found. Welcome to Fluther.

What is this exhaust smell in my car?

Description : What is this exhaust smell in my car?

Last Answer : answer:Rotten egg smell in exhaust is from catalytic converter. Caused by sulfur additives in your gas, try changing brands of fuel and go up a grade at a new gas station for two or three tankfuls. The ... on a Ford and switched brands of fuel, the smell went away in less than thirty gallons of gas.

What can/should I do to my exhaust system?

Description : What can/should I do to my exhaust system?

Last Answer : You could remove the muffler and replace it with a Glass-pack type muffler. That will make it louder, add a little Horse Power and still be legal.

Is the "exhaust" and heat from laptops and computers harmful for one's health?

Description : Is the "exhaust" and heat from laptops and computers harmful for one's health?

Last Answer : Unless you have a liquid cooled, high performance computer that is leaking coolant from one of the tubes, the answer is no . The exhaust is room air passed over and through a metallic heat sink. It ... the air intake and vents periodically so they do not clog and cause the processor to get too hot.

Should one exhaust the durable or expendable first?

Description : Should one exhaust the durable or expendable first?

Last Answer : Which one is more expensive? Which one is better for the environment? You are not providing enough information.

Why is it that nearly every automobile that has the exhaust on the right side has the fuel delivery on the left side, and vice versa?

Description : Why is it that nearly every automobile that has the exhaust on the right side has the fuel delivery on the left side, and vice versa?

Last Answer : As exhausts produce heat they usually want to keep em as far away from the fuel tanks as possible :-)

Do bathroom exhaust fans REALLY work?

Description : Do bathroom exhaust fans REALLY work?

Last Answer : Open a window , i never use bathroom fan .