The basicity of aniline is less than that of cyclohexylamine. This is due to :

The basicity of aniline is less than that of cyclohexylamine. This is due to :
by

1 Answer

Answer :

The basicity of aniline is less than that of cyclohexylamine. This is due to : A. `-R` effect ... effect of `-NH_(2)` group D. hyperconjugation effect
by
selected by

Related questions

Decreasing order of basicity of the three isomers of nitro aniline is:

Description : Decreasing order of basicity of the three isomers of nitro aniline is:

Last Answer : Decreasing order of basicity of the three isomers of nitro aniline is: A. p-nitroaniline `gt o` ... `gt o-` nitroaniline `gt p-` nitroaniline

Cyclohexanol can be converted into cyclohexylamine by following two routes. Which of the following methods is expected to give good yield of cyclohexy

Description : Cyclohexanol can be converted into cyclohexylamine by following two routes. Which of the following methods is expected to give good yield of cyclohexy

Last Answer : Cyclohexanol can be converted into cyclohexylamine by following two routes. Which of the following methods ... equally suitable D. neither of the two

Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) More than (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Description : Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) ... (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Last Answer : (C) Same as

Consider the given compounds : (a) `CH_(3)-CH_(2)-NH_(2)` (b) `CH_(3)-CH=NH` (c ) `CH_(3)-C=N` (d) `C_(2)H_(5)-NH-C_(2)H_(5)` Arrange basicity of thes

Description : Consider the given compounds : (a) `CH_(3)-CH_(2)-NH_(2)` (b) `CH_(3)-CH=NH` (c ) `CH_(3)-C=N` (d) `C_(2)H_(5)-NH-C_(2)H_(5)` Arrange basicity of thes

Last Answer : Consider the given compounds : (a) `CH_(3)-CH_(2)-NH_(2)` (b) `CH_(3)-CH=NH` (c ) `CH_(3)-C=N` (d) `C_(2 ... `a gt d gt b gt c` D. `d gt a gt c gt b`

The order of decreasing basicity in the four halide ions is :

Description : The order of decreasing basicity in the four halide ions is :

Last Answer : The order of decreasing basicity in the four halide ions is : A. `I^(-) gt Br^(-) gt Cl^(-) gt F^(-)` B. `Cl ... `Cl^(-) gt F^(-) gt Br^(-) gt I^(-)`

What is the basicity of `H_(3)PO_(3)` ?

Description : What is the basicity of `H_(3)PO_(3)` ?

Last Answer : What is the basicity of `H_(3)PO_(3)` ?

The corret order of increasing basicity of the given conjugated bases `(R=CH_(3))` is :

Description : The corret order of increasing basicity of the given conjugated bases `(R=CH_(3))` is :

Last Answer : The corret order of increasing basicity of the given conjugated bases `(R=CH_(3))` is : A. `RCOO^(-)ltHC-=C^(- ... ^(-)ltNH_(2)^(-)ltHC-=C^(-)ltR^(-)`

Among the following anions, the order of basicity is : `overset(-)(C )H_(3)(I), overset(-)(N)H_(2)(II), OH^(-)(III),F^(-)(IV)`

Description : Among the following anions, the order of basicity is : `overset(-)(C )H_(3)(I), overset(-)(N)H_(2)(II), OH^(-)(III),F^(-)(IV)`

Last Answer : Among the following anions, the order of basicity is : `overset(-)(C )H_(3)(I), overset(-)(N)H_(2)(II), OH^(- ... > II > I > IV D. III > I > II > IV

In the following compounds piperidine (I), pyridine (II), morpholine (III) and pyerrole (IV), the order of basicity is :

Description : In the following compounds piperidine (I), pyridine (II), morpholine (III) and pyerrole (IV), the order of basicity is :

Last Answer : In the following compounds piperidine (I), pyridine (II), morpholine (III) and pyerrole ( ... `IIIgtIgtIVgtII` C. `IIgtIgtIIIgtIV` D. `IgtIIIgtIIgtIV`

Arragne basicity of the following compounds in decreasing order: `CH_(3)CH_(2)NH_(2)(I)," "H_(2)C=CH-NH_(2)(II),` `HC-=C-NH_(2)(III)," "C_(6)H_(5)NH_(

Description : Arragne basicity of the following compounds in decreasing order: `CH_(3)CH_(2)NH_(2)(I)," "H_(2)C=CH-NH_(2)(II),` `HC-=C-NH_(2)(III)," "C_(6)H_(5)NH_(

Last Answer : Arragne basicity of the following compounds in decreasing order: `CH_(3)CH_(2)NH_(2)(I), ... `IVgtIIIgtIIgtI` C. `IIIgtIIgtIgtIV` D. `IgtIIIgtIIgtIV`

Choose the correct comparisons of basicity:

Description : Choose the correct comparisons of basicity:

Last Answer : Choose the correct comparisons of basicity: A. B. C. D.

The correct order of decreasing basicity of the following species is: `H_(2)O, OH^(-), CH_(3)OH, CH_(3)O`

Description : The correct order of decreasing basicity of the following species is: `H_(2)O, OH^(-), CH_(3)OH, CH_(3)O`

Last Answer : The correct order of decreasing basicity of the following species is: `H_(2)O, OH^(-), CH_(3)OH, CH_(3)O` A. ... CH_(3)O^(-) gt CH_(3)OH gt H_(2)O`

Iron sulphide is heated in air to form A, an oxide of sulphur. A is dissolved in water to give an acid. The basicity of this acid is..

Description : Iron sulphide is heated in air to form A, an oxide of sulphur. A is dissolved in water to give an acid. The basicity of this acid is..

Last Answer : Iron sulphide is heated in air to form A, an oxide of sulphur. A is dissolved in water to give an acid. The ... acid is.. A. 2 B. 3 C. 1 D. Zero

How to measure the acidity and basicity of a substances?

Description : How to measure the acidity and basicity of a substances?

Last Answer : The pH of a solution is a measure of the molar concentration of hydrogen ions in the solution and as such is a measure of the acidity or basicity of the solution. The letters pH stand for power of ... value for pH is just the negative of the power of 10 of the molar concentration of H+ ions.

An acid having basicity one is - (1) Sodium dihydrogen phosphate (2) Disodium hydrogen phosphate (3) Sodium phosphate (4) Phosphoric acid

Description : An acid having basicity one is - (1) Sodium dihydrogen phosphate (2) Disodium hydrogen phosphate (3) Sodium phosphate (4) Phosphoric acid

Last Answer : (2) Disodium hydrogen phosphate Explanation: The basicity of an acid is the number of hydrogen ions (H+) which can be produced by the ionization of one molecule of the acid in aqueous solution. ... Similarly, the basicity of Disodium phosphate (Na2HPO4) is one since it has one H+ displaceable ion.

Calcium cynamide have equivalent basicity a. 21 b. 29 c. 63 d. 110

Description : Calcium cynamide have equivalent basicity a. 21 b. 29 c. 63 d. 110

Last Answer : c. 63

The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Description : The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Last Answer : Option A

The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Description : The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Last Answer : Option A

Basicity [%Cao + %MgO + %SiO2) of the slag in Indian blast furnace is in the range of (A) 0.7-1.0 (B) 1.1-1.4 (C) 1.5 - 1.8

Description : Basicity [%Cao + %MgO + %SiO2) of the slag in Indian blast furnace is in the range of (A) 0.7-1.0 (B) 1.1-1.4 (C) 1.5 - 1.8

Last Answer : Option B

An acid having basicity one is (1) Sodium dihydrogen phosphate (2) Disodium hydrogen phosphate (3) Sodium phosphate (4) Phosphoric acid

Description : An acid having basicity one is (1) Sodium dihydrogen phosphate (2) Disodium hydrogen phosphate (3) Sodium phosphate (4) Phosphoric acid

Last Answer : Disodium hydrogen phosphate

Which of the following is more basic than aniline?

Description : Which of the following is more basic than aniline?

Last Answer : Which of the following is more basic than aniline? A. p-Nitroaniline B. Benzyl amine C. Diphenyl amine D. Triphenyl amine

Examine the structal formules of following compounds and identify how many compounds are more basic than aniline.

Description : Examine the structal formules of following compounds and identify how many compounds are more basic than aniline.

Last Answer : Examine the structal formules of following compounds and identify how many compounds are more basic than aniline.

Pkb of aniline is more than that of methyl amine.

Description : Pkb of aniline is more than that of methyl amine.

Last Answer : In aniline, the lone pair of electrons on the N-atom are delocalized over the benzene ring. As a result electron density on the nitrogen decreases. In contrast in CH2NH2 , + I effect of CH3 ... , aniline is a weaker base than methylamine and hence its Pkb value is higher than that of methylamine.

p-bromoaniline is prepared from aniline via

Description : p-bromoaniline is prepared from aniline via

Last Answer : p-bromoaniline is prepared from aniline via A. direct bromination of aniline in presence of Lewis ... in presence of light D. amination of bromine

Can the amino group, in the aniline molecule, become meta-directing in an electrophilic substitution reaction ?

Description : Can the amino group, in the aniline molecule, become meta-directing in an electrophilic substitution reaction ?

Last Answer : Can the amino group, in the aniline molecule, become meta-directing in an electrophilic substitution reaction ... D. Yes, in a non-polar solvent

Aniline reacts with mixed acid (conc. `HNO_(3)` and conc. `H_(2)SO_(4)`) at 288 K to give P (51%), Q (47%) and R(2%). The major product (s) of the fol

Description : Aniline reacts with mixed acid (conc. `HNO_(3)` and conc. `H_(2)SO_(4)`) at 288 K to give P (51%), Q (47%) and R(2%). The major product (s) of the fol

Last Answer : Aniline reacts with mixed acid (conc. `HNO_(3)` and conc. `H_(2)SO_(4)`) at 288 K to give P ... of the following reaction sequence is (are) B. C. D.

The major product Y in the following sequence of reaction is: Aniline `overset((i) NaNO_(2)//HCl,273K)underset((ii)CuCN//KCN)to(X) overset((i)"DIBAL-H

Description : The major product Y in the following sequence of reaction is: Aniline `overset((i) NaNO_(2)//HCl,273K)underset((ii)CuCN//KCN)to(X) overset((i)"DIBAL-H

Last Answer : The major product Y in the following sequence of reaction is: Aniline `overset((i) NaNO_(2)//HCl,273K)underset((ii)CuCN ... H_(2)O)to (Y)` A. B. C. D.

Aniline when diazotized in cold and then treated with dimethyl aniline gives a coloured product. Its structure would be

Description : Aniline when diazotized in cold and then treated with dimethyl aniline gives a coloured product. Its structure would be

Last Answer : Aniline when diazotized in cold and then treated with dimethyl aniline gives a coloured product. Its structure would be A. B. C. D.

Which reaction sequence would be best to prepare 3-chloro-aniline form benzene

Description : Which reaction sequence would be best to prepare 3-chloro-aniline form benzene

Last Answer : Which reaction sequence would be best to prepare 3-chloro-aniline form benzene A. ... . nitration, reduction, acetylation, chlorination, hydrolysis

Chloroform when treated aniline and alcoholic KOH, the product formed is?

Description : Chloroform when treated aniline and alcoholic KOH, the product formed is?

Last Answer : Chloroform when treated aniline and alcoholic KOH, the product formed is? A. Phenyl cyanide B. Phenyl isocyanide C. Chlorobenzene D. Phenol

Aniline when treated acetyl chlroide in presence of alkali, the product formed is:

Description : Aniline when treated acetyl chlroide in presence of alkali, the product formed is:

Last Answer : Aniline when treated acetyl chlroide in presence of alkali, the product formed is: A. ... benzoyl chloride C. acetophenone D. aniline hydrochloride

Why is aniline soluble in aqueous HCl?

Description : Why is aniline soluble in aqueous HCl?

Last Answer : Why is aniline soluble in aqueous HCl?

Which of the following give aniline by reduction of nitrobenzene?

Description : Which of the following give aniline by reduction of nitrobenzene?

Last Answer : Which of the following give aniline by reduction of nitrobenzene? A. `H_(2)//Pd-C` B. `Sn+HCI` C. `Cu+HCI` D. `(NH_(4))_(2)S`

One mole of aniline warmed with the mixture of `NaNO_(2)+HCl`. If we assume 100% yield, volume of `N_(2)` gas liberated at S.T.P is

Description : One mole of aniline warmed with the mixture of `NaNO_(2)+HCl`. If we assume 100% yield, volume of `N_(2)` gas liberated at S.T.P is

Last Answer : One mole of aniline warmed with the mixture of `NaNO_(2)+HCl`. If we assume 100% yield, volume of `N_(2)` gas ... 4 L` C. `33.6 L` D. `44.8 L`

Reference fuels for knock rating of SI engine fuels would include (a) Iso octane alpha methyl naphthalene (b) Normal octance and aniline (c) Isooctance and n octane (d) N heptane and iso octane

Description : Reference fuels for knock rating of SI engine fuels would include (a) Iso octane alpha methyl naphthalene (b) Normal octance and aniline (c) Isooctance and n octane (d) N heptane and iso octane

Last Answer : Ans : d

Chemical name of Gammaxane is - (1) Toluene (2) Chloro benzene (3) Aniline (4) Benzene hexachloride

Description : Chemical name of Gammaxane is - (1) Toluene (2) Chloro benzene (3) Aniline (4) Benzene hexachloride

Last Answer : (4) Benzene hexachloride Explanation: Gammexane is an insecticide that is the gamma isomer of benzene hexachloride. It is also known as lindane. Benzene hexachloride is any of several stereoisomers of 1,2,3,4,5,6- hexachlorocyclohexane formed by the lightinduced addition of chlorine to benzene.

Polythene is polymer of – (1) Ethylene (2) Propylene (3) Acetylene (4) Aniline

Description : Polythene is polymer of – (1) Ethylene (2) Propylene (3) Acetylene (4) Aniline

Last Answer : (1) Ethylene Explanation: The ingredient or monomer is ethylene (IUPAC name ethene). It has the formula C2H4, consisting of a pair of CH2 groups connected by a double bond. Because the catalysts are highly reactive, the ethylene must be of high purity. Typical specifications are H2SO4

'Red Ink' is prepared from - (1) Phenol (2) Aniline (3) Congo redd (4) Eosin

Description : 'Red Ink' is prepared from - (1) Phenol (2) Aniline (3) Congo redd (4) Eosin

Last Answer : (4) Eosin Explanation: Eosin is a dye used to prepare red ink. Eosin Y is a xanthene dye and is used for the differential staining of connective tissue and cytoplasm.

Which of the following is a natural dye? (1) Crystal violet (2) Aniline blue (3) Alizarin (4) Phenolphthalein

Description : Which of the following is a natural dye? (1) Crystal violet (2) Aniline blue (3) Alizarin (4) Phenolphthalein

Last Answer : (3) Alizarin Explanation: Alizarin or 1,2- dihydroxyanthraquinone (also known as Mordant Red 11 and Turkey Red is an organic compound with formula C14H8O4 that has been used throughout history as a ... of the madder genus. In 1869, it became the first natural pigment to be duplicated synthetically.

Diesel index is defined as (A) (°API) × (Aniline Point, °F)/100 (B) (°API) × (Aniline Point, °C)/100 (C) (°API) × (100)/Aniline Point, °F (D) (°API) × (100)/Aniline Point, °C

Description : Diesel index is defined as (A) (°API) × (Aniline Point, °F)/100 (B) (°API) × (Aniline Point, °C)/100 (C) (°API) × (100)/Aniline Point, °F (D) (°API) × (100)/Aniline Point, °C

Last Answer : (A) (°API) × (Aniline Point, °F)/100

Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Description : Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Last Answer : (C) Aromatic

Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Description : Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Last Answer : (C) Luminosity number

High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index

Description : High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index

Last Answer : (C) Is highly paraffinic

Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Description : Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Last Answer : (C) Equal to cetane number plus 3

Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Description : Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Last Answer : (B) Paraffin

Which of the following tests is not done for transformer oil? (A) Flash point and acid value (B) Aniline point (C) Dielectric strength (D) Copper strip corrosion test

Description : Which of the following tests is not done for transformer oil? (A) Flash point and acid value (B) Aniline point (C) Dielectric strength (D) Copper strip corrosion test

Last Answer : (B) Aniline poin

Aniline point is a property of the (A) Diesel (B) LPG (C) Naphtha (D) Gasoline

Description : Aniline point is a property of the (A) Diesel (B) LPG (C) Naphtha (D) Gasoline

Last Answer : (C) Naphtha

A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Description : A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (A) Viscosity index

Aniline point of high speed diesel may be about __________ °C. (A) 35 (B) 70 (C) 105 (D) 150

Description : Aniline point of high speed diesel may be about __________ °C. (A) 35 (B) 70 (C) 105 (D) 150

Last Answer : (B) 70