1985 305 bad fuel order and my plugs are fouling out.

Last Answer : Spark plug gap is where spark plug spark discharge is designed to take place. On a conventional spark plug, it is the area between the center and the ground electrode.

If a bearing is designated by the number 305, it means that the bearing is of (a) light series whose bore is 5 mm (b) light series whose bore is 25 mm (c) medium series whose bore is 5 mm (d) medium series whose bore is 25 mm

Description : If a bearing is designated by the number 305, it means that the bearing is of (a) light series whose bore is 5 mm (b) light series whose bore is 25 mm (c) medium series whose bore is 5 mm (d) medium series whose bore is 25 mm

Last Answer : (d) medium series whose bore is 25 mm

Height of platform of a flag station in cutting above rail level is (a) Same height as Rail level (b) 305 mm above rail level (c) 455 mm above rail level (d) 840mm above rail level*

Description : Height of platform of a flag station in cutting above rail level is (a) Same height as Rail level (b) 305 mm above rail level (c) 455 mm above rail level (d) 840mm above rail level*

Last Answer : (d) 840mm above rail level*

Is it a bad idea to wear ear plugs on an airplane?

Description : Is it a bad idea to wear ear plugs on an airplane?

Last Answer : If your ears start to hurt take them out.

_____and extensions are software that extends or modifies the functionality of another piece of software and require that software be used in order to function: a) Plugs Stan b) Plug outs c) Plugins d) None of These

Description : _____and extensions are software that extends or modifies the functionality of another piece of software and require that software be used in order to function: a) Plugs Stan b) Plug outs c) Plugins d) None of These

Last Answer : c) Plugins

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the fifth stick on the side to which the tree should fall. During construction of a dam, a tree 18 inches in diameter was completely covered by water. Since the treetop was fouling the boat's propellers, it had to be cut down. A diver went down and put a stick of dynamite on the four sides of the tree. Since the current is flowing south at 2 knots per hour, on which side of the tree would you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Description : Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the ... you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Last Answer : It doesn't matter where the fifth stick is placed, since the tree won't fall in any direction. Being wood, it will float and rise to the surface.

Fouling factor' used in the design of a multipass shell and tube heat exchanger is a (A) Non-dimensional factor (B) Factor of safety

Description : Fouling factor' used in the design of a multipass shell and tube heat exchanger is a (A) Non-dimensional factor (B) Factor of safety

Last Answer : (B) Factor of safety

Baffles are provided in heat exchangers to increase the (A) Fouling factor (B) Heat transfer area (C) Heat transfer co-efficient (D) Heat transfer rate

Description : Baffles are provided in heat exchangers to increase the (A) Fouling factor (B) Heat transfer area (C) Heat transfer co-efficient (D) Heat transfer rate

Last Answer : (C) Heat transfer co-efficient

Fouling factor (A) Is a dimensionless quantity (B) Does not provide a safety factor for design (C) Accounts for additional resistances to heat flow (D) None of these

Description : Fouling factor (A) Is a dimensionless quantity (B) Does not provide a safety factor for design (C) Accounts for additional resistances to heat flow (D) None of these

Last Answer : (C) Accounts for additional resistances to heat flow

Which characteristic of a fluid is not important in deciding its route in a shell and tube heat exchanger? (A) Corrosiveness (B) Fouling characteristic (C) Viscosity (D) None of these

Description : Which characteristic of a fluid is not important in deciding its route in a shell and tube heat exchanger? (A) Corrosiveness (B) Fouling characteristic (C) Viscosity (D) None of these

Last Answer : (D) None of these

In SI units, fouling factor is expressed in (A) m2°K/W (B) W/m2°K (C) m2°K (D) m°K/W

Description : In SI units, fouling factor is expressed in (A) m2°K/W (B) W/m2°K (C) m2°K (D) m°K/W

Last Answer : (A) m2°K/W

The overall heat transfer co-efficient for a shell and tube heat exchangerfor clean surfaces is U0 = 400 W/m2.K. The fouling factor after one year ofoperation is found to be hd0 = 2000 W/m2.K. The overall heat transfer coefficient at this time is(A) 1200 W/m2.K(B) 894 W/m2.K(C) 333 W/m2.K(D) 287 W/m2.K

Description : The overall heat transfer co-efficient for a shell and tube heat exchangerfor clean surfaces is U0 = 400 W/m2 .K. The fouling factor after one year of operation is found to be hd0 = 2000 W/m2 .K. The overall heat transfer coefficient ... 1200 W/m2 .K (B) 894 W/m2 .K (C) 333 W/m2 .K (D) 287 W/m2 .K

Last Answer : (C) 333 W/m2 .K

Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Description : Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Last Answer : (D) Density

Which is the best tube arrangement (in a shell and tube heat exchanger) if the fluids are clean and non-fouling? (A) Square pitch (B) Triangular pitch (C) Diagonal square pitch

Description : Which is the best tube arrangement (in a shell and tube heat exchanger) if the fluids are clean and non-fouling? (A) Square pitch (B) Triangular pitch (C) Diagonal square pitch chemical-engineering

Last Answer : (B) Triangular pitch

Fouling factor for a heat exchanger is given by (where, U1 = heat transfer co-efficient of dirty surface U2 = heat transfer co-efficient of clean surface). (A) U1 - U2 (B) 1/U1 - 1/U2 (C) 1/U2 - 1/U1 (D) U2 - U1

Description : Fouling factor for a heat exchanger is given by (where, U1 = heat transfer co-efficient of dirty surface U2 = heat transfer co-efficient of clean surface). (A) U1 - U2 (B) 1/U1 - 1/U2 (C) 1/U2 - 1/U1 (D) U2 - U1

Last Answer : (B) 1/U1 - 1/U2

Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking (B) Hot starting (C) Spark plug fouling (D) All 'a', 'b' & 'c'

Description : Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking (B) Hot starting (C) Spark plug fouling (D) All 'a', 'b' & 'c'

Last Answer : (C) Spark plug fouling

Baffles provided on the shell side of a shell and tube heat exchanger are meant for (A) Providing support for the tubes (B) Improving heat transfer (C) Both 'a' & 'b' (D) Preventing the fouling of tubes & stagnation of shell side fluid

Description : Baffles provided on the shell side of a shell and tube heat exchanger are meant for (A) Providing support for the tubes (B) Improving heat transfer (C) Both 'a' & 'b' (D) Preventing the fouling of tubes & stagnation of shell side fluid

Last Answer : C) Both 'a' & 'b'

Pollution caused by cooling tower includes 1. Fouling 2. Limestone formation 3. Corrosion 4. All of above

Description : Pollution caused by cooling tower includes 1. Fouling 2. Limestone formation 3. Corrosion 4. All of above

Last Answer : All of above

The presence of these pollutants can cause a series of problems. The main problems that are caused______ • are fouling, • limestone formation, • corrosion and biological • All of the above

Description : The presence of these pollutants can cause a series of problems. The main problems that are caused______ • are fouling, • limestone formation, • corrosion and biological • All of the above

Last Answer : All of the above

When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Description : When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Last Answer : a. In the climb if you have not adjusted the mixture

When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Description : When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Last Answer : a. In the climb if you have not adjusted the mixture

Factors responsible for membrane fouling

Description : Factors responsible for membrane fouling

Last Answer : Factors responsible for membrane fouling: Membrane fouling in almost all membrane processes is normally caused by precipitation and deposition of molecules or particulates on the membrane surface or membrane pores. The consequences of ... 4.Floc size 5. Alkalinity and pH 6.Salinity

Membrane fouling control method

Description : Membrane fouling control method

Last Answer : Some common preventative measures to avoid membrane fouling are 1. Scheduled cleaning 2. Pretreatment 3. System design Scheduled cleaning A systematic cleaning regimen can help to prevent ... e. Increase the cross-flow velocity, which generally results in an improvement in permeate flux.

Reversible and irreversible fouling of membrane

Description : Reversible and irreversible fouling of membrane

Last Answer : Membrane fouling can be divided into reversible (removable, irremovable) and irreversible fouling based on the attachment strength of particles to the membrane surface. Removable fouling caused by loosely ... difficult, as the amount of material deposited on the membrane surface is usually small.

Bio fouling of membrane

Description : Bio fouling of membrane

Last Answer : Bio fouling of membrane: Biofouling is the irreversible adhesion on a membrane of microorganisms and the extracellular polymers (ECPs, i.e., biofilm) that they produce. The process of ... consumption due to higher pressure being required to overcome the biofilm resistance and the flux decline.

Fouling of membrane

Description : Fouling of membrane

Last Answer : Fouling of membrane: Membrane fouling is a process whereby a solution or a particle is deposited on a membrane surface or in membrane pores in a processes such as in a ... distillation, ultrafiltration, microfiltration, or nanofiltration so that the membrane's performance is negatively affected.

Would it be useful for electric ranges to have plugs on the side?

Description : Would it be useful for electric ranges to have plugs on the side?

Last Answer : I think some of them have. I'm pretty sure I remember having some like that. My not-very-educated guess, is that they tend not to lately because they'd complicate the range's design and take ... itself will tend to be well-equipped with power outlets and that that's the appropriate place for them.

Can anyone recommend good ear plugs?

Description : Can anyone recommend good ear plugs?

Last Answer : Just use cheap foam ones.

Plugs that go into female headers?

Description : Plugs that go into female headers?

Last Answer : There is no standard name; they are generally named after their function.

Where can I find Ear Plugs with this logo?

Description : Where can I find Ear Plugs with this logo?

Last Answer : Body Candy has them for you.

HONESTLY: Does anyone think that "plugs" (tribal style wide-guage earings) make a person look better?

Description : HONESTLY: Does anyone think that "plugs" (tribal style wide-guage earings) make a person look better?

Last Answer : How do people sleep in those too? Doesn’t it get in the way?

Why do electricians install power plugs upside down?

Description : Why do electricians install power plugs upside down?

Last Answer : I’ve often wondered this myself. Could it be some sort of electrians union plot?

Why power plugs pins have small holes in the end?

Description : Why power plugs pins have small holes in the end?

Last Answer : I don’t know the answer but I would love too.

What kind of electrical plugs do they use in Bali?

Description : What kind of electrical plugs do they use in Bali?

Last Answer : answer:According to Wikipedia, Indonesia uses type C, type F (which I believe are both standard European two prong power plugs), and less commonly type G plugs. They use 220 - 240 V which is what ... you're staying or your travel agent to find out what type of travel adaptor you will actually need.

Etymotic ER20BP or Hearos High Fidelity ear plugs?

Description : Etymotic ER20BP or Hearos High Fidelity ear plugs?

Last Answer : answer:I have used various plugs from Hearos. They work. If you look at the attenuation data on their webpages (http://hearos.com/earplugs/products-00211.html , http://www.etymotic.com/ephp/ ... better than nothing. It looks like the Etymoyic might often a little better noise reduction. Good luck

Microwave ventilation holes are shaped like electric plugs?

Description : Microwave ventilation holes are shaped like electric plugs?

Last Answer : That’s because those aren’t ventilation holds, they’re holes for plugs. They must use the same backplane worldwide and use different electrical connections in different countries. Also, the same backplane may be use for different models. Why retool when you can make one generic backplane and reuse.

Are there ear plugs for dogs?

Description : Are there ear plugs for dogs?

Last Answer : I don't think you're going to find any earplugs that are going to be an adequate water barrier. My recommendation would be to use a high quality ear cleaner after each trip to the pool. Some cleaners are ... nice squishy sound, and then let the dog shake his head (no need to use cotton or q-tips).

How to get metal 00g double flare plugs in?

Description : How to get metal 00g double flare plugs in?

Last Answer : have u tried pushing one of the flares in sideways, and then rotating it in? (does that make sense?) did u try vaseline? since they're healed you could gauge one larger and then put them ... the wide end of the chopstick and followed the chopstick through.. try to find something like that but larger

when to plant dichondra plugs

Description : when to plant dichondra plugs

Last Answer : Need Answer

how often should acura tl spark plugs be changed

Description : how often should acura tl spark plugs be changed

Last Answer : Need Answer

What can cause no fire at the plugs?

Description : What can cause no fire at the plugs?

Last Answer : Need answer

Where are the spark plugs located in a 2002 Mazda Tribute?

Description : Where are the spark plugs located in a 2002 Mazda Tribute?

Last Answer : Screwed into the cylinder head.

What is cost to replace spark plugs and wires in ford Edge?

Description : What is cost to replace spark plugs and wires in ford Edge?

Last Answer : What is the answer ?

1985 305 bad fuel order and my plugs are fouling out.

Please log in or register to add a comment.

Please log in or register to answer this question.

1 Answer

Answer :

Please log in or register to add a comment.

Related questions