In SI units, fouling factor is expressed in (A) m2°K/W (B) W/m2°K (C) m2°K (D) m°K/W

In SI units, fouling factor is expressed in
(A) m2°K/W
(B) W/m2°K
(C) m2°K
(D) m°K/W
by

1 Answer

Answer :

(A) m2°K/W
by

Related questions

The unit of heat transfer co-efficient in SI unit is (A) J/M2°K (B) W/m2°K (C) W/m°K (D) J/m°K

Description : The unit of heat transfer co-efficient in SI unit is (A) J/M2°K (B) W/m2°K (C) W/m°K (D) J/m°K

Last Answer : (B) W/m2°K

The unit of conductance in SI unit is (A) W/m (B) W/m2 (C) W/°K (D) W/m°K

Description : The unit of conductance in SI unit is (A) W/m (B) W/m2 (C) W/°K (D) W/m°K

Last Answer : (C) W/°K

In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K

Description : In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K

Last Answer : (A) Watt/m.°K

The overall heat transfer co-efficient for a shell and tube heat exchangerfor clean surfaces is U0 = 400 W/m2.K. The fouling factor after one year ofoperation is found to be hd0 = 2000 W/m2.K. The overall heat transfer co￾efficient at this time is(A) 1200 W/m2.K(B) 894 W/m2.K(C) 333 W/m2.K(D) 287 W/m2.K

Description : The overall heat transfer co-efficient for a shell and tube heat exchangerfor clean surfaces is U0 = 400 W/m2 .K. The fouling factor after one year of operation is found to be hd0 = 2000 W/m2 .K. The overall heat transfer co￾efficient ... 1200 W/m2 .K (B) 894 W/m2 .K (C) 333 W/m2 .K (D) 287 W/m2 .K

Last Answer : (C) 333 W/m2 .K

The variation of thermal conductivity of a metal with temperature is often correlated using an expression of the form K = K0 + at, where, K is the thermal conductivity and T is the temperature (in °K). The units of 'a' in SI system will be (A) W/m.k (B) W/m (C) W/m.k

Description : The variation of thermal conductivity of a metal with temperature is often correlated using an expression of the form K = K0 + at, where, K is the thermal conductivity and T is the temperature (in °K). The units of 'a' in SI system will be (A) W/m.k (B) W/m (C) W/m.k

Last Answer : (C) W/m.k

Fouling factor' used in the design of a multipass shell and tube heat exchanger is a (A) Non-dimensional factor (B) Factor of safety

Description : Fouling factor' used in the design of a multipass shell and tube heat exchanger is a (A) Non-dimensional factor (B) Factor of safety

Last Answer : (B) Factor of safety

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Baffles are provided in heat exchangers to increase the (A) Fouling factor (B) Heat transfer area (C) Heat transfer co-efficient (D) Heat transfer rate

Description : Baffles are provided in heat exchangers to increase the (A) Fouling factor (B) Heat transfer area (C) Heat transfer co-efficient (D) Heat transfer rate

Last Answer : (C) Heat transfer co-efficient

Fouling factor (A) Is a dimensionless quantity (B) Does not provide a safety factor for design (C) Accounts for additional resistances to heat flow (D) None of these

Description : Fouling factor (A) Is a dimensionless quantity (B) Does not provide a safety factor for design (C) Accounts for additional resistances to heat flow (D) None of these

Last Answer : (C) Accounts for additional resistances to heat flow

Fouling factor for a heat exchanger is given by (where, U1 = heat transfer co-efficient of dirty surface U2 = heat transfer co-efficient of clean surface). (A) U1 - U2 (B) 1/U1 - 1/U2 (C) 1/U2 - 1/U1 (D) U2 - U1

Description : Fouling factor for a heat exchanger is given by (where, U1 = heat transfer co-efficient of dirty surface U2 = heat transfer co-efficient of clean surface). (A) U1 - U2 (B) 1/U1 - 1/U2 (C) 1/U2 - 1/U1 (D) U2 - U1

Last Answer : (B) 1/U1 - 1/U2

Electric current may be expressed in which one of the following units? w) coulombs/volt x) joules/coulomb y) coulombs/second z) ohms/second

Description : Electric current may be expressed in which one of the following units? w) coulombs/volt x) joules/coulomb y) coulombs/second z) ohms/second

Last Answer : ANSWER: Y -- COULOMBS/SECOND

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

If the time required for half change is inversely proportional to the square of initial concentration and the velocity depends on the units in which the concentration term is expressed, then the order of reaction is (A) 0 (B) 1 (C) 2 (D) 3

Description : If the time required for half change is inversely proportional to the square of initial concentration and the velocity depends on the units in which the concentration term is expressed, then the order of reaction is (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (D) 3

Which characteristic of a fluid is not important in deciding its route in a shell and tube heat exchanger? (A) Corrosiveness (B) Fouling characteristic (C) Viscosity (D) None of these

Description : Which characteristic of a fluid is not important in deciding its route in a shell and tube heat exchanger? (A) Corrosiveness (B) Fouling characteristic (C) Viscosity (D) None of these

Last Answer : (D) None of these

Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Description : Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Last Answer : (D) Density

Which is the best tube arrangement (in a shell and tube heat exchanger) if the fluids are clean and non-fouling? (A) Square pitch (B) Triangular pitch (C) Diagonal square pitch

Description : Which is the best tube arrangement (in a shell and tube heat exchanger) if the fluids are clean and non-fouling? (A) Square pitch (B) Triangular pitch (C) Diagonal square pitch chemical-engineering

Last Answer : (B) Triangular pitch

Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking (B) Hot starting (C) Spark plug fouling (D) All 'a', 'b' & 'c'

Description : Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking (B) Hot starting (C) Spark plug fouling (D) All 'a', 'b' & 'c'

Last Answer : (C) Spark plug fouling

Baffles provided on the shell side of a shell and tube heat exchanger are meant for (A) Providing support for the tubes (B) Improving heat transfer (C) Both 'a' & 'b' (D) Preventing the fouling of tubes & stagnation of shell side fluid

Description : Baffles provided on the shell side of a shell and tube heat exchanger are meant for (A) Providing support for the tubes (B) Improving heat transfer (C) Both 'a' & 'b' (D) Preventing the fouling of tubes & stagnation of shell side fluid

Last Answer : C) Both 'a' & 'b'

What do you mean by gravitational constant? State its SI units.

Description : What do you mean by gravitational constant? State its SI units.

Last Answer : What do you mean by gravitational constant? State its SI units.

List the conventions followed while using SI units.

Description : List the conventions followed while using SI units.

Last Answer : List the conventions followed while using SI units.

Explain why scientists use the International System of Units (SI).?

Description : Explain why scientists use the International System of Units (SI).?

Last Answer : I have NO idea

Explain why scientists use the International System of Units (SI).?

Description : Explain why scientists use the International System of Units (SI).?

Last Answer : I have NO idea

In which system of units, gas bills are charged? A. SI B. CGS C. BTU D. None of Above

Description : In which system of units, gas bills are charged? A. SI B. CGS C. BTU D. None of Above

Last Answer : ANSWER: C

Natural Gas In which system of units, gas bills are charged? A. SI B. CGS C. BTU D. None of Above

Description : Natural Gas In which system of units, gas bills are charged? A. SI B. CGS C. BTU D. None of Above

Last Answer : ANSWER: C

In which system of units, gas bills are charged? A. SI B. CGS C. BTU D. None of Above

Description : In which system of units, gas bills are charged? A. SI B. CGS C. BTU D. None of Above

Last Answer : ANSWER: C

In SI units the power of sound is represented in A. Kgs B. Joules C. Newtons D. Watts

Description : In SI units the power of sound is represented in A. Kgs B. Joules C. Newtons D. Watts

Last Answer : ANS: D

How many fundamental units are there in SI system?

Description : How many fundamental units are there in SI system?

Last Answer : Ans. There are seven fundamental units in SI system.

In which system of units, gas bills are charged? A. SI B. CGS C. BTU (Answer) D. CNG

Description : In which system of units, gas bills are charged? A. SI B. CGS C. BTU (Answer) D. CNG

Last Answer : C. BTU (Answer)

The SI units of permitivity are: (a) N.m/C2(b) C2/N.m2 (c) N.m2/C2(d) N.m/C

Description : The SI units of permitivity are: (a) N.m/C2(b) C2/N.m2 (c) N.m2/C2(d) N.m/C

Last Answer : (b) C2/N.m2

The unit of Torque in SI units (a) kg-m (b) kg-cm (c) N-m (d) N/m2

Description : The unit of Torque in SI units (a) kg-m (b) kg-cm (c) N-m (d) N/m2

Last Answer : (c) N-m

Which of the seven SI (International System of Units) base units may also refer to one of the mammals in the Talpidae family?

Description : Which of the seven SI (International System of Units) base units may also refer to one of the mammals in the Talpidae family?

Last Answer : Mole.

Basic SI units

Description : Basic SI units

Last Answer : Basic SI units

What is basic SI units?

Description : What is basic SI units?

Last Answer : SI units stand for International System of units. It was introduced in 1960. There are seven basic quantity in SI unit. They are Length unit is metre (m), Mass unit is kilogram (kg), Time unit is ... is kelvin (K), Luminous intensity unit is candela (cd), Amount of substance unit is mole (mol).

What are the SI derived units?

Description : What are the SI derived units?

Last Answer : Electrical capacitance, electrical resistance, electrical inductance, force, energy, power, magnetic flux, electric charge, and electric potential difference and EMF. These are the nine SI derived units.

in which of the following units is acceleration expressed? -General Knowledge

Description : in which of the following units is acceleration expressed? -General Knowledge

Last Answer : Acceleration is expressed in - meters per second squared.

Dispersion can be expressed in units of ____________________ rather than

Description : Dispersion can be expressed in units of ____________________ rather than

Last Answer : time

Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the fifth stick on the side to which the tree should fall. During construction of a dam, a tree 18 inches in diameter was completely covered by water. Since the treetop was fouling the boat's propellers, it had to be cut down. A diver went down and put a stick of dynamite on the four sides of the tree. Since the current is flowing south at 2 knots per hour, on which side of the tree would you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Description : Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the ... you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Last Answer : It doesn't matter where the fifth stick is placed, since the tree won't fall in any direction. Being wood, it will float and rise to the surface.

1985 305 bad fuel order and my plugs are fouling out.

Description : 1985 305 bad fuel order and my plugs are fouling out.

Last Answer : Need Answer

Pollution caused by cooling tower includes 1. Fouling 2. Limestone formation 3. Corrosion 4. All of above

Description : Pollution caused by cooling tower includes 1. Fouling 2. Limestone formation 3. Corrosion 4. All of above

Last Answer : All of above

The presence of these pollutants can cause a series of problems. The main problems that are caused______ • are fouling, • limestone formation, • corrosion and biological • All of the above

Description : The presence of these pollutants can cause a series of problems. The main problems that are caused______ • are fouling, • limestone formation, • corrosion and biological • All of the above

Last Answer : All of the above

When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Description : When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Last Answer : a. In the climb if you have not adjusted the mixture

When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Description : When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Last Answer : a. In the climb if you have not adjusted the mixture

Factors responsible for membrane fouling

Description : Factors responsible for membrane fouling

Last Answer : Factors responsible for membrane fouling: Membrane fouling in almost all membrane processes is normally caused by precipitation and deposition of molecules or particulates on the membrane surface or membrane pores. The consequences of ... 4.Floc size 5. Alkalinity and pH 6.Salinity

Membrane fouling control method

Description : Membrane fouling control method

Last Answer : Some common preventative measures to avoid membrane fouling are 1. Scheduled cleaning 2. Pretreatment 3. System design Scheduled cleaning A systematic cleaning regimen can help to prevent ... e. Increase the cross-flow velocity, which generally results in an improvement in permeate flux.

Reversible and irreversible fouling of membrane

Description : Reversible and irreversible fouling of membrane

Last Answer : Membrane fouling can be divided into reversible (removable, irremovable) and irreversible fouling based on the attachment strength of particles to the membrane surface. Removable fouling caused by loosely ... difficult, as the amount of material deposited on the membrane surface is usually small.

Bio fouling of membrane

Description : Bio fouling of membrane

Last Answer : Bio fouling of membrane: Biofouling is the irreversible adhesion on a membrane of microorganisms and the extracellular polymers (ECPs, i.e., biofilm) that they produce. The process of ... consumption due to higher pressure being required to overcome the biofilm resistance and the flux decline.

Fouling of membrane

Description : Fouling of membrane

Last Answer : Fouling of membrane: Membrane fouling is a process whereby a solution or a particle is deposited on a membrane surface or in membrane pores in a processes such as in a ... distillation, ultrafiltration, microfiltration, or nanofiltration so that the membrane's performance is negatively affected.

Solid angle subtended by the finite surface at the radiating element is (A) Called the view factor (B) Called the angle of vision (C) Proportional to the square of the distance between surfaces (D) Expressed in terms of radians

Description : Solid angle subtended by the finite surface at the radiating element is (A) Called the view factor (B) Called the angle of vision (C) Proportional to the square of the distance between surfaces (D) Expressed in terms of radians

Last Answer : (B) Called the angle of vision

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads