What does a cooling fan with a mixing chamber system mean for a built-in screw?

Hello, can you please tell me exactly what the "Cooling fan with mixing chamber system" means for the built-in electric oven. Thank you, Sendy.
by

1 Answer

Answer :

Need Answer
by

Related questions

Helical screw agitator is used for (A) Mixing highly viscous pastes (B) Blending immiscible liquids (C) Mixing liquids at very high temperature (> 250 °C) (D) None of these

Description : Helical screw agitator is used for (A) Mixing highly viscous pastes (B) Blending immiscible liquids (C) Mixing liquids at very high temperature (> 250 °C) (D) None of these

Last Answer : (A) Mixing highly viscous pastes

Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller(B) Helical screw(C) Flat blade turbine(D) Curved blade turbine

Description : Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller (B) Helical screw (C) Flat blade turbine (D) Curved blade turbine

Last Answer : (B) Helical screw

Size of the combustion chamber of a furnace depends upon the (A) Heat release rate of the fuel (B) Preheat temperature of fuel & air (C) Method of mixing the fuel & air (D) All (A), (B) and (C)

Description : Size of the combustion chamber of a furnace depends upon the (A) Heat release rate of the fuel (B) Preheat temperature of fuel & air (C) Method of mixing the fuel & air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Flue gas from the heating chamber of byproduct coke ovens is removed by (A) Forced draft fan (B) Induced draft fan (C) Steam ejector (D) Natural draft

Description : Flue gas from the heating chamber of byproduct coke ovens is removed by (A) Forced draft fan (B) Induced draft fan (C) Steam ejector (D) Natural draft

Last Answer : (D) Natural draft

In adiabatic evaporative cooling, heat transfer between chamber and surroundings is ____ A. zero B. high C. low D. none of the mentioned

Description : In adiabatic evaporative cooling, heat transfer between chamber and surroundings is ____ A. zero B. high C. low D. none of the mentioned

Last Answer : ANSWER : A

The equipment frequently used for adiabatic humidification-cooling operation with recirculating liquid is (A) Natural draft cooling tower (B) Induced draft cooling tower (C) Spray chamber (D) None of these

Description : The equipment frequently used for adiabatic humidification-cooling operation with recirculating liquid is (A) Natural draft cooling tower (B) Induced draft cooling tower (C) Spray chamber (D) None of these

Last Answer : (C) Spray chamber

Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core(C) Lowering the coolant circulation pressure(D) Avoiding the mixing of water with radioactive sodium, as it may causeexplosion

Description : Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core (C) ... circulation pressure (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Last Answer : (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

The most common summer cooling system in greenhouses is: a. Package evaporative coolers b. Fan-tube cooling system c. Fog evaporative cooling d. Fan-and-pad evaporative cooling

Description : The most common summer cooling system in greenhouses is: a. Package evaporative coolers b. Fan-tube cooling system c. Fog evaporative cooling d. Fan-and-pad evaporative cooling

Last Answer : Fan-and-pad evaporative cooling

Does any know if using the fan on your central A/C unit, use as much energy as when it is cooling?

Description : Does any know if using the fan on your central A/C unit, use as much energy as when it is cooling?

Last Answer : answer:The actual calculation would depend on the particulars of your unit, but remember that when the AC is on its cooling cycle, both the fan and the compressor unit are running. The compressor uses roughly the ... / 1000 watts per kilowatt = 1,119 kilowatt hours, at $0.10 per kwh makes $111.90.

How to Change a CPU Cooling Fan?

Description : How to Change a CPU Cooling Fan?

Last Answer : How to Change a CPU Cooling FanOne of two problems may be happening that would lead you to needto change your CPU cooling fan. Your fan may be faulty, or you mayhave to replace the entire CPU ... formats (e.g. Pentium 4 Socket 423), this can be aproblem.Step 1.Unplug the computerStep 2Remove

Will I need to upgrade my cooling fan if I upgrade my motherboard?

Description : Will I need to upgrade my cooling fan if I upgrade my motherboard?

Last Answer : If you are moving your current processor into the upgraded motherboard, your current cooling fan does not need to be upgraded.

If a cooling fan does not work properly, then which computer function and part is likely to get damaged first?

Description : If a cooling fan does not work properly, then which computer function and part is likely to get damaged first?

Last Answer : The CPU usually gets damaged first

Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of forced draft cooling tower is reduced by the recirculation of the humid and hot discharged air (C) A natural draft cooling tower is recommended to be used, when the air humidity is low and air temperature is also low (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Description : Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of ... Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Last Answer : (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater number of blades (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater ... (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In the natural draft cooling tower_________ is not required a) Fan b) tower c) Nozzle d) none of the above

Description : In the natural draft cooling tower_________ is not required a) Fan b) tower c) Nozzle d) none of the above

Last Answer : Fan

How is air produced in mechanical cooling tower 1 air fan 2 propeller fans 3 air blowers 4 propeller blowers

Description : How is air produced in mechanical cooling tower 1 air fan 2 propeller fans 3 air blowers 4 propeller blowers

Last Answer : 2 propeller fans

The electric motor in hybrid car can also act as_____ • A generator • A Fuel pump • Cooling fan • Compressor

Description : The electric motor in hybrid car can also act as_____ • A generator • A Fuel pump • Cooling fan • Compressor

Last Answer : • A generator

Explain the working of electrically driven fan in cooling engine.

Description : Explain the working of electrically driven fan in cooling engine.

Last Answer : Working of Electrically Driven Fan in Cooling Engine: The fan is driven by a separate electric motor which is supplied with power directly from the electric circuit of the engine. A thermostat switch is ... the time the fan motor remains in ON position, while 95% of the time it is off. 

Differentiate induced draft and forced draft cooling towers based on (i) Location of fan (ii) Corrosion of blades (iii) Efficiency (iv) Fan size

Description : Differentiate induced draft and forced draft cooling towers based on (i) Location of fan (ii) Corrosion of blades (iii) Efficiency (iv) Fan size

Last Answer : Differentiate induced draft and forced draft cooling towers based on (i) Location of fan (ii) Corrosion of blades (iii) Efficiency (iv) Fan size

Why aren't the reactors and cooling tanks of nuclear power plants built below water level?

Description : Why aren't the reactors and cooling tanks of nuclear power plants built below water level?

Last Answer : answer:What would keep that water in once the area was flooded? If you open a dam, remove a levy, or open some kind of gate that water can flow both ways. A pump would allow you to control what comes and goes.

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

The first hyperbolic cooling tower was built in... a. 1916 b. 1917 c. 1918 d. 1919

Description : The first hyperbolic cooling tower was built in... a. 1916 b. 1917 c. 1918 d. 1919

Last Answer : 1918

The first hyperboloid shaped cooling tower was introduced by the Dutch engineers Frederik van Iterson and Gerard Kuypers and built in ……….. a) 1918 c) 1919 b) 1870 d) 1920

Description : The first hyperboloid shaped cooling tower was introduced by the Dutch engineers Frederik van Iterson andGerard Kuypers and built in ……….. a) 1918 c) 1919 b) 1870 d) 1920

Last Answer : 1918

The __________ that are present depend on cooling tower building material, as well. Cooling towers are built of concrete, wood, plastic or metal. a. Heat b. Pollutants c. Cold d. All of Above

Description : The __________ that are present depend on cooling tower building material, as well. Cooling towers are built of concrete, wood, plastic or metal. a. Heat b. Pollutants c. Cold d. All of Above

Last Answer : b. Pollutants

What are built to cool down the cooling water in a power plant 1 Towers 2 Cooling pond 3 Air filter 4 non of these

Description : What are built to cool down the cooling water in a power plant 1 Towers 2 Cooling pond 3 Air filter 4 non of these

Last Answer : 1 Towers

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

What does Screw that as mean as a bad word?

Description : What does Screw that as mean as a bad word?

Last Answer : Need answer

A screw is specified by (A) Major diameter (B) Minor diameter (C) Pitch diameter (D) Mean diameter

Description : A screw is specified by (A) Major diameter (B) Minor diameter (C) Pitch diameter (D) Mean diameter

Last Answer : (A) Major diameter

What does Chamber mean ?

Description : What does Chamber mean ?

Last Answer : Chamber means meeting , room.

In pre-chamber and swirl type of combustion system ______________ is used. a) single hole injector b) multi hole injector c) long stem injector d) pintle nozzle

Description : In pre-chamber and swirl type of combustion system ______________ is used. a) single hole injector b) multi hole injector c) long stem injector d) pintle nozzle

Last Answer : Answer: d Explanation: In pre-chamber and swirl type of combustion system pintle nozzle is used and not the other nozzles.

Amount of coal lost in ash particle, which is carried through the boiler system, depends upon the (A) Physical nature, ash content and fineness of the coal (B) Amount of excess air supplied and load on the boiler (C) Type of burner and combustion chamber (D) All (A), (B) and (C)

Description : Amount of coal lost in ash particle, which is carried through the boiler system, depends upon the (A) Physical nature, ash content and fineness of the coal (B) Amount of excess air supplied and load on the boiler (C) Type of burner and combustion chamber (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The inspection pit or chamber is a manhole provided in a base drainage system (A) At every change of direction (B) At every change of gradient (C) At every 30 m intervals (D) All the above

Description : The inspection pit or chamber is a manhole provided in a base drainage system (A) At every change of direction (B) At every change of gradient (C) At every 30 m intervals (D) All the above

Last Answer : (D) All the above

In a counter-current extractor, as the axial mixing increases, the extraction efficiency (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on the pressure of the system

Description : In a counter-current extractor, as the axial mixing increases, the extraction efficiency (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on the pressure of the system

Last Answer : (B) Decreases

What is a CMS in web design  Content Management System  Creative Management System  Content Mixing System  Creatives Managerial System

Description : What is a CMS in web design   Content Management System   Creative Management System   Content Mixing System   Creatives Managerial System 

Last Answer :  Content Management System

When (and why) did UPS screw up their package tracking website?

Description : When (and why) did UPS screw up their package tracking website?

Last Answer : If I had to guess, maybe it has to do with using USPS over Christmas. Just guessing though. When did it change? Is that an actual copy paste in March?

Did you see the Best Picture screw up last night on the Oscars?

Description : Did you see the Best Picture screw up last night on the Oscars?

Last Answer : I haven’t seen it yet, but I read that he did realize it and showed it to Faye Dunaway who saw the movie name under Emma Stones name so she read that. Again, I didn’t see it yet, though I have it taped. For anyone that did see it, does that look like what happened?

Why aren't there screw-based cocking mechanisms for crossbows?

Description : Why aren't there screw-based cocking mechanisms for crossbows?

Last Answer : answer:I want to say that there are some screw-based ones, but I've been looking for an illustration and haven't found one yet. I think I have seen such an illustration or even an actual one in a museum ... were more efficient, we'd see more of them, and they're rare enough I'm finding none so far.

My screw in guages size 00g are stuck, any advice ?

Description : My screw in guages size 00g are stuck, any advice ?

Last Answer : Try putting on a pair of latex gloves. The rubber will give a bit of grip to help twist them apart.

Did you watch or hear about the Miss Universe screw up?

Description : Did you watch or hear about the Miss Universe screw up?

Last Answer : I think this was a publicity stunt. Not too many people watch this anymore, and this certainly will get a lot of media attention.

Is there any hope for a stuck screw?

Description : Is there any hope for a stuck screw?

Last Answer : answer:MORE POWER! ;) If I understand your description correctly, push on the top with your thumb, twist the shaft with your fingers. If it doesn't budge the screw or slip out, try twisting the shaft ... straight down the shaft to the screwhead, so the tip doesn't slip out. Fingers crossed for you!

How many people would you be willing to completely screw over, if you thought you could make money from it?

Description : How many people would you be willing to completely screw over, if you thought you could make money from it?

Last Answer : None? But it feels as if this question is loaded with rock salt.

Does taking your medication and vitamins screw up what time you can eat?

Description : Does taking your medication and vitamins screw up what time you can eat?

Last Answer : answer:Not now, but in the past I've had a diet like that. There was about a month that it was so complicated, I didn't even leave the house because I'd miss something. I have figured ... a very very small meal. That way I can fairly quickly take the next supplement that requires an empty stomach

What are a list of things that one can do to screw up ones life?

Description : What are a list of things that one can do to screw up ones life?

Last Answer : 1. Getting hooked on drugs and/or alcohol. No one ever intends to become addicted. The best way to avoid it is not to use.

How is it that some people can beg and beg for a second chance, and when you give it to them they promptly screw things up again?

Description : How is it that some people can beg and beg for a second chance, and when you give it to them they promptly screw things up again?

Last Answer : answer:Things don't change for folks like this because everyone around them sees their actions as screwing up. Things only change for folks like this when they see their own actions as ... But actually manifesting a change from that realization is even more difficult, decades in the process.

When you can't sleep, at what hour do you say "screw it" and stay awake?

Description : When you can't sleep, at what hour do you say "screw it" and stay awake?

Last Answer : Usually try to lie in bed til around 6, although often I will get up, check the computer and then go back to bed for a while.

Why does the slotted screw persist?

Description : Why does the slotted screw persist?

Last Answer : You can’t pry open a paint can or putty container with a Phillip’s screwdriver.

Have you ever wanted to say "screw it" about your medications?

Description : Have you ever wanted to say "screw it" about your medications?

Last Answer : answer:No, I have never had that impulse. I am afraid that you having that impulse may be your manic mood. Do not chuck all of your medication. Remember the miseries of the swings.

How to screw with someone's mind?

Description : How to screw with someone's mind?

Last Answer : Be the better person and ignore him. Life has a way of teaching people lessons.

Why don't we say screw it and chuck the whole frigging world?

Description : Why don't we say screw it and chuck the whole frigging world?

Last Answer : No I would not join with you. This world is in a state of change and it is almost time for it to receive its progression and to have it altered. We will end up with a new world of peace, love and advancement. It is inevitable and will soon take place.