The power consumption of LEDS may be of the order of

by

1 Answer

Answer :

The power consumption of LEDS may be of the order of 5 to 10 milli-amperes.

by

Related questions

Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Description : Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Last Answer : Ans: D

LEDs operating at 850 nm provide sufficient optical power for short-distance, low-bandwidth multimode systems. List three conditions that prevent the use of LEDs in longer distance, higher bandwidth multimode systems.

Description : LEDs operating at 850 nm provide sufficient optical power for short-distance, low-bandwidth multimode systems. List three conditions that prevent the use of LEDs in longer distance, higher bandwidth multimode systems.

Last Answer : Multimode fiber dispersion, the relatively high fiber attenuation, and the LED's relatively low optical output power.

Which kind of lightbulb is more energy efficient / cost efficient to operate for the same amount of light: those twisty spiral florecent bulbs or LEDs?

Description : Which kind of lightbulb is more energy efficient / cost efficient to operate for the same amount of light: those twisty spiral florecent bulbs or LEDs?

Last Answer : LEDs are more energy efficient and last longer

Will UV LEDs work like a UV tube?

Description : Will UV LEDs work like a UV tube?

Last Answer : answer:Ahh too late to edit, I can get 385-405nm ones for super cheap, but I can see some 380nm ones for 67 cents each, woud those be better? I'm having trouble finding what the real ... , found 100 5mm LEDs, 380-385nm wavelength, only 30 bucks! I wonder if that wavelength works well though.

Is my 1993 Miata Too old school for LED's?

Description : Is my 1993 Miata Too old school for LED's?

Last Answer : It maybe the bad contact in the socket is is causing it. check your grounds. The circuit for the brake/running lights maybe causing the cruise control to malfunction. I had a Mitsubishi that ... 4 way flashers on and have the cruise control work ! Think flashing lights equal to malfunction socket.

Why can't I mix and match LEDs wired in parallel?

Description : Why can't I mix and match LEDs wired in parallel?

Last Answer : answer:An LED is a diode. As such it has a forward voltage drop, i.e., when it's conducting current and shining light, there is a small voltage drop from one end to the other. (After all, with ... device & some would shine brighter than others. So it's still best to give each LED its own resistor.

Why can't I mix and match LEDs wired in parallel?

Description : Why can't I mix and match LEDs wired in parallel?

Last Answer : answer:An LED is a diode. As such it has a forward voltage drop, i.e., when it's conducting current and shining light, there is a small voltage drop from one end to the other. (After all, with ... device & some would shine brighter than others. So it's still best to give each LED its own resistor.

Has anyone bought loose LEDs?

Description : Has anyone bought loose LEDs?

Last Answer : What are you buying them for? I’ve bought them before, but I was buying them for an electronics kit type thing.

Where can I find the best deals on LEDs?

Description : Where can I find the best deals on LEDs?

Last Answer : Here!

What is the lifetime of LEDs? a. 200,000 minutes b. 200,000 hours c. 150,000 minutes d. 150,000 hours

Description : What is the lifetime of LEDs? a. 200,000 minutes b. 200,000 hours c. 150,000 minutes d. 150,000 hours

Last Answer : b. 200,000 hours

Are the effects of temperature changes on LDs more or less significant than for LEDs?

Description : Are the effects of temperature changes on LDs more or less significant than for LEDs?

Last Answer : More.

Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Description : Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Last Answer : SLEDs and ELEDs.

Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Description : Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Last Answer : LEDs require less complex circuitry than lasers.

Semiconductor LEDs emit incoherent light. Define incoherent light

Description : Semiconductor LEDs emit incoherent light. Define incoherent light

Last Answer : Light waves that lack a fixed-phase relationship

Why can multimode graded-index fiber 1300-nm systems using LEDs operate over longer distances and at higher bandwidths than 850-nm systems?

Description : Why can multimode graded-index fiber 1300-nm systems using LEDs operate over longer distances and at higher bandwidths than 850-nm systems?

Last Answer : Longer distances and higher bandwidths are possible because fiber material losses and dispersion are significantly reduced at the 1300-nm region.

Both LEDs and ILDs operate correctly with ∙ A. forward bias ∙ B. reverse bias ∙ C. neither forward nor reverse bias ∙ D. either forward or reverse bias

Description : Both LEDs and ILDs operate correctly with ∙ A. forward bias ∙ B. reverse bias ∙ C. neither forward nor reverse bias ∙ D. either forward or reverse bias

Last Answer : A. forward bias

Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Description : Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Last Answer : ∙ a. It has high losses

What is the typical wavelength of light emitted from epitaxially grown LEDs? ∙ a. 840 nm ∙ b. 490 nm ∙ c. 480 nm ∙ d. 940 nm

Description : What is the typical wavelength of light emitted from epitaxially grown LEDs? ∙ a. 840 nm ∙ b. 490 nm ∙ c. 480 nm ∙ d. 940 nm

Last Answer : ∙ d. 940 nm

Both LEDs and ILDs operate correctly with ∙ a. Forward bias ∙ b. Reverse bias ∙ c. Neither A or B ∙ d. Either A or B

Description : Both LEDs and ILDs operate correctly with ∙ a. Forward bias ∙ b. Reverse bias ∙ c. Neither A or B ∙ d. Either A or B

Last Answer : a. Forward bias

What is the lifetime of LEDs? ∙ a. 200,000 minutes ∙ b. 200,000 hours ∙ c. 150,000 minutes ∙ d. 150,000 hours

Description : What is the lifetime of LEDs? ∙ a. 200,000 minutes ∙ b. 200,000 hours ∙ c. 150,000 minutes ∙ d. 150,000 hours

Last Answer : a. 200,000 minutes

Both LEDs and ILDs operate correctly with:

Description : Both LEDs and ILDs operate correctly with:

Last Answer : Forward bias

Sir , if there are 9 LEDs connected in series with the 9 volt battery and each led has a forward voltage drop of 1 volt , do i need a resistor in the circuit (in series with led)?

Description : 9 leds each of 1 volt drop is series with 9  volt battery , do we need a resistor?(SMD leds) I have seen some smd leds without resistor !

Last Answer : We connect resistor to limit the current. So, it depends upon the current rating of the LED, which is provided by manufacturer.

Find out number of data lines required to interface 16 LEDs arrange in the 4 x 4 matrix form.

Description : Find out number of data lines required to interface 16 LEDs arrange in the 4 x 4 matrix form.

Last Answer : 4+4=8, eight lines are required for 4x4 matrix of 16 LEDs

The semiconductor used for LEDs emitting in the visible range is

Description : The semiconductor used for LEDs emitting in the visible range is  (a) GaAs (b) GaAlAs (c) GalnAs (d) GaAsP

Last Answer : The semiconductor used for LEDs emitting in the visible range is GaAsP

LEDs normally work on a voltage of

Last Answer : LEDs normally work on a voltage of 1 to 2 V.

In order to reduce quantizing noise, one must

Last Answer : In order to reduce quantizing noise, one must Increase the number of standard amplitudes.

As the thermal noise get doubled due to the increase in a resistance the noise power get.

Description : As the thermal noise get doubled due to the increase in a resistance the noise power get.  (A) doubled (B) quadruped (C) unchanged (D) halved.

Last Answer : As the thermal noise get doubled due to the increase in a resistance the noise power get. unchanged 

When large amount of power is required, a push pull amplifier is designed for operation as

Last Answer : When large amount of power is required, a push pull amplifier is designed for operation as class B.

If two parallel-connected resistors dissipate 6 watts and 10 watts of power, then what is the total power loss?

Last Answer : If two parallel-connected resistors dissipate 6 watts and 10 watts of power, then 16 watts is the total power loss.

When power ratios are expressed in dBm, the reference power is

Last Answer : When power ratios are expressed in dBm, the reference power is 1 mW.

State the need of signal conditioning and signal processing .List applications of instrumentation amplifier.

Description : State the need of signal conditioning and signal processing .List applications of instrumentation amplifier.

Last Answer : * In an instrumentation system, a transducer is used for sensing various parameters. The output of transducer is an electrical signal proportional to the physical quantity sensed such as pressure, ... monitoring and control 5) Light intensity meter 6) Measurement of flow and thermal conductivity

Which of the following statement is false? Modulation is used to:

Description : Which of the following statement is false? Modulation is used to: (1) Reduce the bandwidth used (2) Separate differing transmissions (3) Ensure that intelligence may be transmitted over long distances (4) Allow the use of practicable antennas

Last Answer : Which of the following statement is false? Modulation is used to: Reduce the bandwidth used

Indicate which one of the following is NOT an advantage of FM over AM?

Description : Indicate which one of the following is NOT an advantage of FM over AM? (1) Better noise immunity is provided (2) Lower bandwidth is required (3) The transmitted power is more useful (4) Less modulating power is required 

Last Answer : Indicate which one of the following is NOT an advantage of FM over AM? (1) Better noise immunity is provided (2) Lower bandwidth is required (3) The transmitted power is more useful (4) Less modulating power is required 

Theoretical bandwidth requirement for FM system is:

Description : Theoretical bandwidth requirement for FM system is: (1) Same as that of the modulating signal bandwidth (2) Twice of modulating signal Bandwidth (3) Thrice as of modulating signal Bandwidth (4) Infinite 

Last Answer : Theoretical bandwidth requirement for FM system is: Infinite

The Ku frequency band used in satellite communication (for uplink and downlink) is:

Description : The Ku frequency band used in satellite communication (for uplink and downlink) is: (1) 14 GHz and 11 GHz (2) 30 GHz and 20 GHz (3) 70 GHz and 50 GHz (4) 60 GHz and 45 GHz 

Last Answer : The Ku frequency band used in satellite communication (for uplink and downlink) is: 14 GHz and 11 GHz 

The disadvantage of CDMA system is:

Description : The disadvantage of CDMA system is: (1) Higher MAI with more user count. (2) That it needs least power consumption. (3) That it needs coherent signal. (4) That it is not suitable with PSK systems 

Last Answer : The disadvantage of CDMA system is: Higher MAI with more user count. 

Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle?

Description : Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle? (1) Thermal noise (2) Shot noise (3) Environmental noise (4) Background Noise

Last Answer : Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle? (1) Thermal noise (2) Shot noise (3) Environmental noise (4) Background Noise

The use of non-uniform quantization leads to:

Description : The use of non-uniform quantization leads to: (1) Reduction in transmission bandwidth. (2) Increase in maximum SNR. (3) Increase in SNR for signal levels. (4) Simplification of quantization process. 

Last Answer : The use of non-uniform quantization leads to:  Increase in SNR for signal levels.

In amplitude modulation AM, if modulation index is more than 100% then:

Description : In amplitude modulation AM, if modulation index is more than 100% then: (1) Power of the wave increases. (2) Efficiency of transmission increases. (3) The wave gets distorted. (4) Bandwidth increases

Last Answer : In amplitude modulation AM, if modulation index is more than 100% then: The wave gets distorted.

In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz:

Description : In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz: (1) 34 and 106 (2) 52 and 88 (3) 106 and 142 (4) 34 and 142

Last Answer : In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz: 52 and 88

In T1 digital system, the frame synchronization code repeats every

Description : In T1 digital system, the frame synchronization code repeats every

Last Answer : In T1 digital system, the frame synchronization code repeats every 125 microsecond

In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the

Description : In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the transmission bit rate is

Last Answer : In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the transmission bit rate is 32 Kbits/sec

Principle of Dopper effect is used in

Description : Principle of Doppler effect is used in

Last Answer : Principle of Doppler effect is used in MTI radar and CW Doppler radar

The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is

Description : The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is

Last Answer : The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is 32953 bits/second

A radio transmitter is an equipment:

Description : A radio transmitter is an equipment:

Last Answer : A radio transmitter is an equipment:  for generating modulated radio frequency waves

A two cavity klystron tube is a

Description : A two cavity klystron tube is a  (A) velocity modulated tube (B) frequency modulated tube (C) Amplitude modulated tube (D) simple triode

Last Answer : A two cavity klystron tube is a velocity modulated tube

Ionosphere layer of earth is situated at

Description : Ionosphere layer of earth is situated at  (A) upto 18 kms from earth (B) from 18 to 70 km (C) 70 to 500 km (D) above 500 km

Last Answer : Ionosphere layer of earth is situated at 70 to 500 km

Which wave cannot exist inside wave guide

Description : Which wave cannot exist inside wave guide  (A) TE (B) TM (C) TEM (D) HE

Last Answer : Which wave cannot exist inside wave guide TEM 

The frequency range 30MHz - 300MHz is

Description : The frequency range 30MHz - 300MHz is  (A) medium frequency (B) very high frequency (C) super high frequency (D) Infrared frequency

Last Answer : The frequency range 30MHz - 300MHz is very high frequency

The most common device used for detection in radio receivers is

Description : The most common device used for detection in radio receivers is   (A)amplifier (B) triode (C) diode (D) transistor

Last Answer : The most common device used for detection in radio receivers is diode