What are the maintenance schedules of a pumping station and type of starters?

What are the maintenance schedules of a pumping station and type of starters?
by

1 Answer

Answer :

Ans. Following are maintenance schedule of the pumping installation:
Switch gear in every quarter and the motor & pump section every half yearly.
 Starters are DOL starter, star delta starter, Auto T/F starter.
by

Related questions

What are the schedules of maintenance done on transformers?

Description : What are the schedules of maintenance done on transformers?

Last Answer : Ans. Following are the schedules of maintenance on transformers. a. Daily maintenance. b. Monthly maintenance. c. Quarterly maintenance. d. Half yearly maintenance. e. Yearly maintenance. f. 5 Yearly maintenance.

Classify condensers used in thermal power station. Explain each type in brief.

Description : Classify condensers used in thermal power station. Explain each type in brief. 

Last Answer : Types of condenser: Classification: 1. Jet Condenser (Mixing Type) 2. Surface condenser (non Mixing type)  Explanation:-   1. Jet Condenser (Mixing Type) In Jet condenser the steam ... there in no direct contact between the steam and cooling water. This condensate is reused in boiler. 

How Do I Build a Low Power FM Radio Station?

Description : How Do I Build a Low Power FM Radio Station?

Last Answer : How Do I Build a Low Power FM Radio Station? A low power FM radio station offers individuals or small groups the ability to go on the air and communicate with the general public using FM radio ... FCC or your local government to determine which, if any FM frequencies you are allowed to transmit on.

Sketch block diagram of satellite earth station and state functions of each block

Description : Sketch block diagram of satellite earth station and state functions of each block

Last Answer : The figure below shows the general block diagram of an earth station capable of transmission, reception and antenna tracking. The following are the major subsystems of ... , possible monitoring of satellite characteristics and occasionally for the measurement of special characteristics. 

Define the following terms : (i) Base Station (ii) Control Channel (iii) Mobile Station (iv) Page

Description : Define the following terms : (i) Base Station (ii) Control Channel (iii) Mobile Station (iv) Page 

Last Answer : i) Base Station: - A fixed station in a mobile radio system used for radio communication with mobile stations. Base stations are located at the center or on the edge of a coverage region ... the page throughout the service area using base stations which broadcast the page on a radio carrier.

Compare the Nuclear power station with Hydro power station.

Description : Compare the Nuclear power station with Hydro power station. 

Last Answer : SR. No.  Points Nuclear Power plant  Hydro Power station  1 Site/ Location Where there is ample supply of water is available, away from thickly populated areas to avoid radioactive ... Field Application As base load  Used as base load during as well as peak load 

Explain the working of Hydro power station with schematic layout.

Description : Explain the working of Hydro power station with schematic layout. 

Last Answer : Working of Hydro- Electric Power Plant: Water stored at high level by constructing dam across river. This stored water has potential energy. This stored water is passed to run the water ... energy and Alternator is coupled to water turbine which converts mechanical energy into electrical energy. 

"Efficiency of thermal power station is low". — Justify.

Description : "Efficiency of thermal power station is low". — Justify. 

Last Answer : Justification: Efficiency of thermal power station is low":- Overall efficiency of T.P.P depends upon efficiency of boiler, turbine and alternator. The heat produced due to combustion of coal ... losses in thermal power plant is 71%, So efficiency of thermal power plant is less about 29% 

Applications of Diesel power station

Description : Applications of Diesel power station

Last Answer : Applications of Diesel Power Station:  1. It can be used as a standby (emergency) power plant to maintain continuity of supply. (Incase failure of main supply like hospital, Telephone exchange Radio ... 10. Diesel plants are widely used for generating power ranging from 100 to 5,000 H.P. 

List out main components of Diesel power station.

Description : List out main components of Diesel power station. 

Last Answer : Main components of Diesel power station: 1) Diesel Engine 2) Engine Air intake system 3) Engine Fuel System 4) Engine Exhaust system 5) Engine cooling system 6) Engine Lubricating system 7) Engine Starting system 8) Diesel Engine Generator (Alternator) 

State the function of following components of a nuclear power station: i) Moderator ii) Shielding iii) Control rod iv) Coolant

Description : State the function of following components of a nuclear power station: i) Moderator ii) Shielding iii) Control rod iv) Coolant 

Last Answer : i) Function of Moderator :- Moderator is to moderate or reduce the speed of fast neutron to help the fission process.  ii) Function of sheilding : Shielding is to protect environment, ... from reactor core and transfer it in heat exchanger for producing steam at high pressure and temperature. 

State the types of radioactive waste generated in a nuclear power station. Explain the methods employed for their disposal.

Description : State the types of radioactive waste generated in a nuclear power station. Explain the methods employed for their disposal.

Last Answer : Types of radioactive waste: The waste produced in nuclear power plant is in the form of solid, liquid & gases, 1. Solid Waste Disposal:-  Solid wastes removed from the reactor are very ... are measured. If it is safe then released to atmosphere at high level through large height chimney.

"Hydro electric power station are not perennial power station". Justify.

Description : "Hydro electric power station are not perennial power station". Justify.

Last Answer : Justification: The water utilized by the hydro power plants comes mostly from storage dams/reservoirs which get filled up during the monsoon rainy season. Such reservoirs are utilized for supplying ... are important. Hence "Hydro electric power stations are not perennial power station" 

List and state any four limitations of inter connected power station.

Description : List and state any four limitations of inter connected power station.

Last Answer : Limitations of inter connected power station:- 1) Initial cost of infrastructure of transmission line increases as length increases. 2) Interconnection required more automation which increases cost on ... capacity. But in absence of surplus power merits of interconnection cannot be obtain.

State the functions of fuel system and exhaust system of a diesel power station.

Description : State the functions of fuel system and exhaust system of a diesel power station.

Last Answer : Fuel system: It supplies fuel to engine for combustion purpose. It consists of Fuel Pump: - It supplies fuel to engine for combustion purpose. Strainer: - Are provided to remove suspended impurities and ... most of the noise. Chimney:- To exhaust gases in the atmosphere as high as possible. 

State the function of cooling tower and condenser in thermal power station.

Description : State the function of cooling tower and condenser in thermal power station.

Last Answer : 1. Condenser:   Function of condenser is to convert exhaust steam again into water by reducing its temperature with the help of cold water. Also it reduces back pressure of steam turbine 2 ... tower : The function of cooling tower is to reduce the temperature of water coming from condenser.

State the purpose of surge tank and spill way in hydroelectric power station.

Description : State the purpose of surge tank and spill way in hydroelectric power station.

Last Answer : Surge tank :- A surge tank is the small reservoir or tank. It is open at the top. It is installed near Vale house of turbine. It avoids water hammer effect when load on turbine reduces. (It ... ; during floods etc. In this way spill way avoids damage of dam due to excess pressure of water.

State any four factors governing Selection of site for thermal power station.

Description : State any four factors governing Selection of site for thermal power station. 

Last Answer : Following Factors are to be considered:- 1. It should locate near coal mine. 2. Sufficient quantity of water should be available. 3. Sufficient large space should be available. 4. It should be located ... laws of the land and the town planning. 14. The interests of national defense must be served.

Write down any two advantages of nuclear power station.

Description : Write down any two advantages of nuclear power station.

Last Answer : Advantages of nuclear power station :-  1) Fuel required: Fuel requirment of Nuclear Power Plant is less than Thermal Power Plant. So it reduces transportation cost of fuel and space required for fuel storage ... By use of nuclear fuel.,it saves the other fossile fuels like-coal, gas, oil, etc.

Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW

Description : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is  (1) 122.8 GWh (2) 198.55 GWh (3) 128.2 GWh (4) 188.82 GWh

Last Answer : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is 122.8 GWh

For high value of diversity factor, a power station of given installed capacity will be in a position to supply?

Last Answer : For high value of diversity factor, a power station of given installed capacity will be in a position to supply more number of consumers.

Load factor of a power station is generally?

Last Answer : Load factor of a power station is generally less than unity.

Load factor of a power station is defined as?

Last Answer : Load factor of a power station is defined as average load/maximum demand.

For the protection of power station buildings against direct strokes the requirements are?

Last Answer : For the protection of power station buildings against direct strokes the requirements are interception, conduction and dissipation.

Batteries Maintenance –

Description : Batteries Maintenance –

Last Answer : a) Specific gravity. b) Voltage/Cell. ON Load/OFF Load(2.2V when fully charged and 1.8 when fully discharged.

Explain Briefing the half yearly schedule maintenance of OH mains?

Description : Explain Briefing the half yearly schedule maintenance of OH mains?

Last Answer : Ans. "(a) Check all the jumper connections (b) Check any connections of the strands of the conductor (c ) Check and ensure proper earth connection (d) Check proper fixation of insulators, stay wires, guard wires, etc. (e) Check proper tensioning and connection of service wires."

What are the schedule maintenance to be carried out OH mains & UG Cables?

Description : What are the schedule maintenance to be carried out OH mains & UG Cables?

Last Answer : Ans. Following are the schedule to be maintained of HO mains and UG cables. a. OH mains – Every Half yearly b. UG.Cables – Every Yearly. During those schedules, for OH, Guarding condition of insulators, sag in OH line are to be checked for UG cables, cables are to be beggared for their IR values.

Power Maintenance INDICATE TRUE OR FALSE TO THE FOLLOWING

Description : Power Maintenance INDICATE TRUE OR FALSE TO THE FOLLOWING

Last Answer : 1) MCB is used in circuits for Overload protection. True or False Ans True 2) We can improve the earth resistance by packing common salt charcoal & water. (True or False) Ans True 3) Silica gel used ... False 15) Shorting of power diode test to be conducted at full load. (True or false) Ans True

Power Maintenance FILL IN THE BLANKS

Description : Power Maintenance FILL IN THE BLANKS

Last Answer : 1) The process of removing heat from low temperature level and rejecting at high temperature is called. REFRIGERATION. 2) Any substances for change of its state at constant temperature absorbs/give up heat is ... ) The capacity of alternator, batteries & fans in TL coach are 4.5KW, 120Ah & 35W.

Power Maintenance ABBREVIATIONS

Description : Power Maintenance ABBREVIATIONS

Last Answer : 1 W - Watts 2 KW - Kilowatts 3 KWH - Kilowatt Hour 4 KVA - Kilo Volt Amps 5 KVAR - Kilo Volt Ampers Reactive 6 H.P. - Horse Power 7 A.H. - Ampere Hours 8 P.F. - Power Factor 9 R.P.M. - ... L.T.U.G - Low Tension Under Ground 36 P.V.C. - Poly Vinly Chloride 37 H.R.C. - High Rapturing Capacity

Power Maintenance MCQ

Description : Power Maintenance MCQ

Last Answer : 1) Turbine pumps are used up to a suction head of ( b ) a. 1000 ft. c. 20 ft b. 100 ft d. 50 ft 2) The yard stick for provision of Electrical points in staff quarters can be changed by the Zonal railways ... is used for electrical fire ( b ) a. Water c. Foam b. Co2 & dry powder d. None of the above

Septic System Maintenance

Description : Septic System Maintenance

Last Answer : Nobody is interested in thinking about what happens when someone forgets to clean his or her septic system in the backyard. We don't need to tell you either. Not draining and cleaning your septic ... its regular cleaning schedule you don't have to worry about the system breaking down anytime soon.

Maintenance and Care: How to clean your Vacuum Cleaner

Description : Maintenance and Care: How to clean your Vacuum Cleaner

Last Answer : Maintenance and Care: How to clean your Vacuum Cleaner There are numerous ways to clean your vacuum cleaner, depending on the brand (manufacturer) and design. However, it is best to ... will bother your work area. Remember, safety considerations are important to prevent any unwanted accidents.

Explain on-line maintenance of Rotameter.

Description : Explain on-line maintenance of Rotameter. 

Last Answer : On line maintenance of Rotameter: In a chemical plant, it is a normal practice to do on line maintenance work. This avoids total shutdown of the equipment or plant. This is possible, if proper ... . Thus it is possible to attend maintenance jobs in the line without stopping the production.

Explain functions and responsibilities of maintenance department.

Description : Explain functions and responsibilities of maintenance department.  

Last Answer : Functions and duties of plant maintenance department 1)Inspection 2)Engineering 3) Maintenance 4) Repair 5) Overhaul 6)Construction 7) Salvage 8) Clerical work 1)Inspection: i) Inspection of ... , ii) of time progress on jobs pertaining to important features of building and production equipment.

Explain breakdown maintenance. Give any two disadvantages of it.

Description : Explain breakdown maintenance. Give any two disadvantages of it.  

Last Answer : Breakdown maintenance: This method of maintenance implies that repairs are made after the equipment is out of order and it cannot perform its normal function any longer. In such situation, ... those plant items which are regulated by statutory provision eg. Cranes, lifts, and pressure vessels.

Explain preventive maintenance.

Description : Explain preventive maintenance. 

Last Answer : Preventive maintenance: It is a system of scheduled, planned maintenance tries to minimize the problem of breakdown maintenance. It is a stich- in- time procedure. It locates weak spots in all equipment ... 8. Lower unit cost of manufacture. 9. Increased equipment life. 10. Better product quality.

Name types of maintenance.

Description : Name types of maintenance. 

Last Answer : Types of maintenance: 1. Corrective or breakdown maintenance 2. Scheduled maintenance 3. Preventive maintenance 4. Predictive maintenance

Describe scheduled maintenance. What are its advantages ?

Description : Describe scheduled maintenance. What are its advantages ? 

Last Answer : Scheduled maintenance: Scheduled maintenance is a stich-in-time procedure which is aimed at avoiding breakdowns. Breakdowns can be dangerous to life and hence should be minimized. Scheduled ... , such as lubricating and retightening screws Lower long term costs compared with breakdown maintenance 

Explain predictive maintenance in detail.

Description : Explain predictive maintenance in detail.

Last Answer : Predictive maintenance: Predictive maintenance makes use of human sense or other sensitive instruments such as audio gauges, vibration analyser, amplitude meter , pressure , temperature and resistance ... 4. Pressure, temperature and resistance strain gauges: eg. Excessive temperature of equipment.

Describe online maintenance with respect to rotameter.

Description : Describe online maintenance with respect to rotameter. 

Last Answer : On line maintenance of Rotameter: In a chemical plant, it is a normal practice to do on line maintenance work. This avoids total shutdown of the equipment or plant. This is possible, if proper ... . Thus it is possible to attend maintenance jobs in the line without stopping the production.

Give the importance of plant maintenance.

Description : Give the importance of plant maintenance. 

Last Answer : Importance of Plant Maintenance : In modern industry, equipment and machinery are a very important part of the total productive effort. With the development of special purpose and sophisticated machines ... and services required by other section of the factory for the performance of their function.

Explain the activities carried out during weekly maintenance of 3 ph. Induction motor.

Description : Explain the activities carried out during weekly maintenance of 3 ph. Induction motor. 

Last Answer : Activities Carried out During Weekly Maintenance of 3 ph. Induction Motor:  1) Check belt tension. In cases where this is excessive it should immediately be reduces and in the case of sleeve ... and cooled by oil mist systems its important to check the oil mist flow paths/pressure components.

Explain the maintenance of lead acid battery.

Description : Explain the maintenance of lead acid battery.

Last Answer : Maintenance of lead acid battery: 1) Keep the container surface dry by using dry cloths. 2) Tighten the terminal connections. 3) Battery should not be discharged below a minimum voltage. 4) Never keep battery ... -container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Which of the following circuit breakers has high reliability & minimum maintenance?

Description : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Last Answer : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Can I reset the regulator on my gas grill?

Description : Can I reset the regulator on my gas grill?

Last Answer : Sounds like the burner is not getting enough air, try cleaning the port where the air and gas mix. Look for little creepy crawlers in the port.

How are public access e-scooters and e-bikes that are scattered all over the city maintained?

Description : How are public access e-scooters and e-bikes that are scattered all over the city maintained?

Last Answer : They’ve been very controversial. There are lots of articles on rental scooters that you’ll find if you google them. But yes, people do collect them at night and recharge them as contractors to the rental companies, if the scooters haven’t been stripped, dismantled, or thrown into a body of water.

What can I do to protect my XBox 360?

Description : What can I do to protect my XBox 360?

Last Answer : the red rings come from overheating. When it gets hot to the touch or you hear the inner fan working overtime, take a break. Also, you can buy an intercooler fan that plugs on the back for about $15 at gamestop.

Is there a good way of removing scratches from glass?

Description : Is there a good way of removing scratches from glass?

Last Answer : answer:http://www.rkdm.com/liquidlense/ There you go!

Give procedure for doing safety audit. Explain records to be examined during safety audit.

Description : Give procedure for doing safety audit. Explain records to be examined during safety audit. 

Last Answer : Procedure of safety Auditing : Safety audit is carried out by a team whose members are not involved in the plant or activity being audited. The expertise of the team should be compatible with ... . Maintenance procedure records. 14. House keeping inspection records. 15. Record of previous audits.